01-012-14
NHTSA communication ID: 10061504
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE.
Source record 10061504 at NHTSAThe manufacturer’s record · Page 3 of 3
2010 Mazda MAZDA6
Manufacturer communications & TSBs.Page 3
Original record summaries, dates and identifiers for this model-year. Records 201–249 of 249, ordered newest first. Dated records on this page: Sep 4, 2009–May 15, 2014.
Back to 2010 Mazda MAZDA6 problems & recallsRead the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
01-012-14-2908
NHTSA communication ID: 10098142
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME VEHICLES MAY EXPERIENCE A MIL ILLUMINATION WITH A DTC P1450:00 STORED IN MEMORY.DTC P1450:00 - UNABLE TO BLEED UP FUEL TANK VACUUMTHIS CONCERN MAY BE CAUSED BY THE PURGE VALVE, WHICH HAS BEEN MODIFIED TO ELIMINATE THIS CONCERN.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10098142 at NHTSA01-012-14
NHTSA communication ID: 10061503
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
Source record 10061503 at NHTSA01-007-14-2899A
NHTSA communication ID: 10098210
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME VEHICLES MAY EXHIBIT AN UNUSUAL SQUEAK NOISE WHEN THE ENGINE IS IDLING, OR JUST AT THE MOMENT WHEN THE ENGINE IS SHUT OFF. THE NOISE MAY BE AUDIBLE FROM INSIDE THE VEHICLE IF ONE OR MORE WINDOWS ARE OPEN, OR IF ANY PASSENGER IS OPENING A DOOR TO EXIT THE VEHICLE. DUE TO ENGINE VIBRATION AND A LACK OF SEAL RING LUBRICATION, THE MESH IN THE SEAL RING (A) RIDES IN THE FLARED PORTION (B) OF THE CATALYTIC CONVERTER (C) RESULTING IN A SLIGHT NOISE FROM THE EXHAUST SYSTEM WHILE THE ENGINE IS RUNNING. THE FRICTION BETWEEN THE EXHAUST SYSTEM PARTS AND THE RESULTING SLIGHT NOISE ARE NORMAL. THIS FRICTION DOES NOT CAUSE BREAKAGE, GAS LEAKAGE, OR OTHER FUNCTIONAL PROBLEMS WITH THE VEHICLES EXHAUST SYSTEM. DURING NORMAL VEHICLE AGING, THE NOISE LEVEL MAY CHANGE AS THE SURFACE OF THE METAL FLANGE DETERIORATES. USU-ALLY THIS NOISE CANNOT BE HEARD WHEN THE ENGINE IS RUNNING, HOWEVER THE NOISE MAY BE HEARD IN A QUIET ENVIRON-MENT WHEN THE CUSTOMER IS OUTSIDE THE VEHICLE OR WHEN A DOOR OR WINDOW IS OPEN.
Source components: ENGINE.
Source record 10098210 at NHTSA01-007-14
NHTSA communication ID: 10061497
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10061497 at NHTSA01-007-14-2899
NHTSA communication ID: 10098049
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME VEHICLES MAY EXHIBIT AN UNUSUAL SQUEAK NOISE WHEN THE ENGINE IS IDLING, OR JUST AT THE MOMENT WHEN THE ENGINE IS SHUT OFF. THE NOISE MAY BE AUDIBLE FROM INSIDE THE VEHICLE IF ONE OR MORE WINDOWS ARE OPEN, OR IF ANY PASSENGER IS OPENING A DOOR TO EXIT THE VEHICLE. DUE TO ENGINE VIBRATION AND A LACK OF SEAL RING LUBRICATION, THE MESH IN THE SEAL RING (A) RIDES IN THE FLARED PORTION (B) OF THE CATALYTIC CONVERTER (C) RESULTING IN A SLIGHT NOISE FROM THE EXHAUST SYSTEM WHILE THE ENGINE IS RUNNING. THE FRICTION BETWEEN THE EXHAUST SYSTEM PARTS AND THE RESULTING SLIGHT NOISE ARE NORMAL. THIS FRICTION DOES NOT CAUSE BREAKAGE, GAS LEAKAGE, OR OTHER FUNCTIONAL PROBLEMS WITH THE VEHICLES EXHAUST SYSTEM. DURING NORMAL VEHICLE AGING, THE NOISE LEVEL MAY CHANGE AS THE SURFACE OF THE METAL FLANGE DETERIORATES. USUALLY THIS NOISE CANNOT BE HEARD WHEN THE ENGINE IS RUNNING, HOWEVER THE NOISE MAY BE HEARD IN A QUIET ENVIRONMENT WHEN THE CUSTOMER IS OUTSIDE THE VEHICLE OR WHEN A DOOR OR WINDOW IS OPEN.
Source components: ENGINE.
Source record 10098049 at NHTSA01-007-14
NHTSA communication ID: 10061498
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10061498 at NHTSA09-012-14-2891
NHTSA communication ID: 10098022
NHTSA source summary · Original PDF not reviewed by Recallfolio
WHEN REPLACING THE SIRIUSXM SATELLITE RADIO UNIT (OR A MAZDA CONNECT TUNER AND AMP UNIT (TAU)) WITH REPLACEMENT TUNER FOR ANY REASON, A CALL MUST BE MADE TO INFORM SIRIUSXM OF THE EXISTING RADIO ID AND THE NEW/ REPLACEMENT SAT RADIO ID AS SOON AS POSSIBLE TO ENSURE THE CUSTOMER LEAVES THE DEALERSHIP WITH ACTIVE (WORKING SAT RADIO.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10098022 at NHTSA09-007-14-2878
NHTSA communication ID: 10097982
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORMANCE OF THE LIGHT. THIS CONDENSATION/FOG IS A NATURAL PHENOMENON THAT OCCURS WHEN THERE IS A FAIRLY LARGE TEMPERATURE DIFFERENCE BETWEEN THE INSIDE AND THE OUTSIDE OF THE LIGHT HOUSING. IT IS NORMAL FOR VERY SMALL WATER DROPS TO APPEAR IN CERTAIN LOCATIONS ON THE LIGHT UNITS WHERE THE AIR IS STAGNANT (CONDENSATION), MAKING THE LENS LOOK WHITISH (FOG). THIS HAPPENS MOSTLY IN THE CORNERS AND NARROW SPACES, AND WILL TYPICALLY CLEAR DURING WARMER AMBIENT TEMPERATURES, OR WHEN THE LIGHTS HAVE BEEN ON FOR SOME TIME. EXPLAIN TO THE CUSTOMER THAT THIS IS A NATURAL PHENOMENON AND NOT A QUALITY DEFECT. DO NOT ATTEMPT REPAIRS AS THIS IS CONSIDERED NORMAL, AND IS NOT COVERED UNDER WARRANTY. REPLACING THE LIGHT UNIT WILL NOT CORRECT THIS SYMPTOM.
Source components: EXTERIOR LIGHTING:FOG LIGHTS.
Source record 10097982 at NHTSA08-001-13-2859
NHTSA communication ID: 10110991
NHTSA source summary · Original PDF not reviewed by Recallfolio
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
Source components: AIR BAGS · ELECTRICAL SYSTEM.
Source record 10110991 at NHTSASB-08-001-13
NHTSA communication ID: 10054788
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE
Source components: AIR BAGS:FRONTAL.
Source record 10054788 at NHTSA04-004-13-2853
NHTSA communication ID: 10110996
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Source components: SERVICE BRAKES.
Source record 10110996 at NHTSA02-009-13-2854
NHTSA communication ID: 10110995
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.Use extra care when cleaning wheels. The following are guidelines to follow when cleaning the wheels.-Mazda recommends using a mild soap or neutral detergent as stated in the owner's manual under Appear-ance Care in the Maintenance and Care section.-DO NOT use a cleaning products containing strong acid or alkali contents to clean the wheels.-DO NOT apply any type of specialized wheel cleaner to the wheels when they are hot (such as after driving the vehicle or if the vehicle has sat in the sun). Ensure wheel temperatures are the same as ambient tem-perature before cleaning.-Within 15 minutes after any cleaner is applied, rinse the wheel thoroughly to completely remove cleaner.-Stains on Mazda Wheels caused by improper cleaning are not covered under the Mazda Vehicle Warranty.
Source components: WHEELS.
Source record 10110995 at NHTSA07-002-13-2842
NHTSA communication ID: 10097805
NHTSA source summary · Original PDF not reviewed by Recallfolio
A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS CAUSED BY CONDENSATION, DUST, AND POLLEN WITHIN THE COOLING UNIT. THIS CONDITION IS USUALLY WORSE DURING HIGH HUMIDITY CONDITIONS. MAZDA AIR COOLING COIL COATING IS AVAILABLE TO ENCAPSULATE THE MOLD TO REDUCE ODORS. IF THE PRODUCT IS PROPERLY APPLIED, IT CAN EFFECTIVELY REDUCE THE MUSTY/MILDEW ODOR FOR UP TO THREE YEARS.NOTE:SEE PARTS INFORMATION FOR MAZDA AIR COOLING COIL COATING AND KIT PART NUMBERS.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10097805 at NHTSA02-004-13-2770B
NHTSA communication ID: 10097722
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3° EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Source components: STEERING: STEERING WHEEL/HANDLE BAR.
Source record 10097722 at NHTSA09-019-13-2805
NHTSA communication ID: 10097390
NHTSA source summary · Original PDF not reviewed by Recallfolio
TO IMPROVE HANDLING OF CUSTOMER CONCERNS WITH HANDS-FREE (BLUETOOTH) VEHICLE SYSTEMS, MAZDA LAUNCHED A NEW SERVICE PROCEDURE AND PART EXCHANGE PROGRAM EFFECTIVE FEB. 08, 2010 ON APPLICABLE VEHICLES. DUE TO THE COMPLEXITY OF SOFTWARE AND HARDWARE AVAILABLE ON VARIOUS CELLULAR PHONES AND CELL PHONE PROVIDER NETWORKS, IT IS ESSENTIAL FOR CUSTOMERS TO CONTACT THE MAZDA HANDS-FREE SYSTEM CUSTOMER CARE NUMBER AT (800) 430-0153 OR, FOR CUSTOMERS REQUIRING ADDITIONAL RESOURCES, PLEASE DIRECT THEM TO WWW.MAZDAUSA.COM/BLUETOOTH. REPRESENTATIVES OF THE CUSTOMER CARE CENTER ARE KNOWLEDGEABLE ON VERIFYING APPROVED PHONES AND PROPERLY PAIRING (PROGRAMMING) SPECIFIC PHONES TO THE VEHICLES BLUETOOTH SYSTEM. THEY ARE ALSO BEST EQUIPPED TO RESOLVE A MAJORITY OF THE PAIRING ISSUES AND OTHER BLUETOOTH RELATED CONCERNS WHEN COMMUNICATING DIRECTLY WITH MAZDA CUSTOMERS.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10097390 at NHTSA09-018-13-2803
NHTSA communication ID: 10097394
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER NOTICED THIS SYMPTOM. IF THE CONDITION IS SIMILAR TO THE FOLLOWING CONTROL LOGIC OF AMBIENT TEMPERATURE OR DIFFERENCE BETWEEN THE TEMPERATURE DISPLAY AND OTHERS, ADVISE THE CUSTOMER THAT THIS IS A NORMAL CHARACTERISTIC OF THE VEHICLE AND NOT A MALFUNCTION. IF THE CONDITION DOES NOT MEET THE FOLLOWING AND THE SENSOR MALFUNCTION IS SUSPECTED, MAKE SURE TO INSPECT THE SENSOR ACCORDING TO MS3 ONLINE OR WORKSHOP MANUAL (SECTION 09-22 AMBIENT TEMPERATURE SENSOR INSPECTION).
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10097394 at NHTSA00-001-13-2748A
NHTSA communication ID: 10097375
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANUAL. SERVICES PERFORMED OUTSIDE OF MAZDAS FACTORY SCHEDULED MAINTENANCE ARE NOT RECOMMENDED. THESE SERVICES ARE UNNECESSARY AND CREATE UNNEEDED EXPENSES FOR YOUR CUSTOMERS.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10097375 at NHTSA02-004-13-2770A
NHTSA communication ID: 10097377
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3° EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Source components: STEERING: STEERING WHEEL/HANDLE BAR.
Source record 10097377 at NHTSA05-002-13-2777A
NHTSA communication ID: 10097348
NHTSA source summary · Original PDF not reviewed by Recallfolio
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCON®LV ATF.ATF M-V (TYPE M5) HAS A GREATER VISCOSITY THAN MERCON®V AND MERCON®LV ATF IN LOW TEMPERATURES. ATF M-V (TYPE M5) HAS A GREATER ANTI-JUDDER SPECIFICATION THAN MERCON®V AND MERCON®LV ATF.TRANSMISSION FLUID FLUSHING SHOULD ONLY BE PERFORMED WHEN INSTRUCTED BY THE WORKSHOP MANUAL OR ANY OTHER MAZDA PUBLICATION.
Source components: POWER TRAIN:MANUAL TRANSMISSION:LUBRICANT.
Source record 10097348 at NHTSA09-005-13-2781
NHTSA communication ID: 10097343
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH PROPER USAGE.FLOOR MAT MOVES FORWARD DUE TO IMPROPER INSTALLATION.INAPPROPRIATE FLOOR MAT (SUCH AS AFTERMARKET, NON-FACTORY-EQUIPPED, OR NON-GENUINE) IS USED.FLOOR MAT IS STACKED ONE ON TOP OF ANOTHER.
Source components: EQUIPMENT.
Source record 10097343 at NHTSASB-09-005-13
NHTSA communication ID: 10052155
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10052155 at NHTSA09-003-13-2776
NHTSA communication ID: 10097369
NHTSA source summary · Original PDF not reviewed by Recallfolio
WHEN DEALING WITH CUSTOMER COMPLAINTS OF EXCESSIVE CONDENSATION AND/OR WATER WITHIN THE HEADLAMP UNIT, FIRST DETERMINE IF ALL THE BULB SOCKETS ARE PRESENT AND CORRECTLY INSTALLED. IN MOST CASES YOU WILL FIND THAT THE BULB SEAL NO. 1 (A) OR HID BULB SEAL NO. 1 (B) AND BULB SEAL NO. 2 (C) SOCKET COVERS HAVE NOT BEEN CORRECTLY INSTALLED OR ARE MISSING DUE TO IMPROPER PRIOR REPAIRS (I.E., CUSTOMER REPLACING THE HEADLAMP BULBS OR BODY SHOP NOT TRANSFERRING THEM WHEN REPLACING THE HEADLAMP UNIT(S) DUE TO A COLLISION). ANY DAMAGE CAUSED BY MISSING SOCKET COVERS, HID MODULE SEAL (D), OR MISSING BUMPER BRACKETS (E) IS NOT COVERED BY WARRANTY POLICY.
Source components: EQUIPMENT:MECHANICAL.
Source record 10097369 at NHTSA05-002-13-2777
NHTSA communication ID: 10097367
NHTSA source summary · Original PDF not reviewed by Recallfolio
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCON®LV ATF.ATF M-V (TYPE M5) HAS A GREATER VISCOSITY THAN MERCON®V AND MERCON®LV ATF IN LOW TEMPERATURES. ATF M-V (TYPE M5) HAS A GREATER ANTI-JUDDER SPECIFICATION THAN MERCON®V AND MERCON®LV ATF.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10097367 at NHTSASB-09-003-13
NHTSA communication ID: 10052160
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: ON VARIOUS MODEL YEARS AND MODEL VEHICLES, THE HEADLAMP ASSEMBLY WOULD HAVE EXCESSIVE CONDENSATION OR WATER WITHIN AND SHOULD BE CHECKED AND REPLACED, IF NECESSARY FOR CORRECT INSTALLATION. *PE
Source components: EXTERIOR LIGHTING:HEADLIGHTS · EXTERIOR LIGHTING:HEADLIGHTS:CONCEALMENT DEVICES.
Source record 10052160 at NHTSA02-004-13-2770
NHTSA communication ID: 10097320
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3° EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Source components: STEERING.
Source record 10097320 at NHTSA00-001-13-2748
NHTSA communication ID: 10097295
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANUAL. SERVICES PERFORMED OUTSIDE OF MAZDAS FACTORY SCHEDULED MAINTENANCE ARE NOT RECOMMENDED. THESE SERVICES ARE UNNECESSARY AND CREATE UNNEEDED EXPENSES FOR YOUR CUSTOMERS.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10097295 at NHTSA02-001-13-2752
NHTSA communication ID: 10097300
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW THE INSPECTION GUIDELINES TO DETERMINE IF THE CONDITION IS A RESULT OF THE NORMAL SWEEPING PROCESS OR A FAILURE OF THE SHAFT SEAL.
Source components: EQUIPMENT.
Source record 10097300 at NHTSA01-002-13-2753
NHTSA communication ID: 10097299
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME VEHICLES MAY EXHIBIT A RATTLE NOISE AND/OR EXHAUST LEAKING NOISE FROM THE REAR OF THE VEHICLE. THE NOISE MAY BE CAUSED BY A GAP BETWEEN THE EXHAUST HANGER BRACKET AND FLANGE, WHICH ALLOWS MOISTURE CONTAINING ROAD SALT TO ENTER AND CAUSE THE EXHAUST STUDS TO RUST AND POSSIBLY BREAK OFF.THE WELDING LOCATION OF THE EXHAUST HANGER BRACKET AND FLANGE HAS BEEN CHANGED DURING VEHICLE PRODUCTION TO ENSURE THE HANGER BRACKET AND FLANGE ARE FLUSH, WITH NO GAPS THAT COULD ALLOW INTRUSION OF MOISTURE CONTAINING ROAD SALT.THE PURPOSE OF THIS BULLETIN IS TO CUT AND CLEAN THE WELDING LOCATION OF THE EXHAUST HANGER BRACKET AND RE-ATTACH IT, SO THE HANGER BRACKET AND FLANGE ARE FLUSH WITH NO GAPS, TO PREVENT INTRUSION OF MOISTURE CONTAINING ROAD SALT.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10097299 at NHTSA01-002-13
NHTSA communication ID: 10059423
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10059423 at NHTSA09-046-12-2744
NHTSA communication ID: 10097941
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORMANCE OF THE LIGHT. THIS CONDENSATION/FOG IS A NATURAL HENOMENON THAT OCCURS WHEN THERE IS A FAIRLY LARGE TEMPERATURE DIFFERENCE BETWEEN THE INSIDE AND THE OUTSIDE OF THE LIGHT HOUSING. IT IS NORMAL FOR VERY SMALL WATER DROPS TO APPEAR IN CERTAIN LOCATIONS ON THE LIGHT UNITS WHERE THE AIR IS STAGNANT (CONDENSATION), MAKING THE LENS LOOK WHITISH (FOG). THIS HAPPENS MOSTLY IN THE CORNERS AND NARROW SPACES, AND WILL TYPICALLY CLEAR DURING WARMER AMBIENT TEMPERATURES, OR WHEN THE LIGHTS HAVE BEEN ON FOR SOME TIME. EXPLAIN TO THE CUSTOMER THAT THIS IS A NATURAL PHENOMENON AND NOT A QUALITY DEFECT. DO NOT ATTEMPT REPAIRS AS THIS IS CONSIDERED NORMAL, AND IS NOT COVERED UNDER WARRANTY. REPLACING THE LIGHT UNIT WILL NOT CORRECT THIS SYMPTOM.
Source components: EXTERIOR LIGHTING · EXTERIOR LIGHTING:FOG LIGHTS.
Source record 10097941 at NHTSA00-004-12-2741
NHTSA communication ID: 10097942
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANUAL. SERVICES PERFORMED OUTSIDE OF MAZDAS FACTORY SCHEDULED MAINTENANCE ARE NOT RECOMMENDED. THESE SERVICES ARE UNNECESSARY AND CREATE UNNEEDED EXPENSES FOR YOUR CUSTOMERS.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10097942 at NHTSA00-004/12
NHTSA communication ID: 10059870
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10059870 at NHTSA01-025-12-2699
NHTSA communication ID: 10097841
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME VEHICLES MAY EXHIBIT AN EXHAUST LEAKING NOISE FROM THE REAR OF THE VEHICLE. THE NOISE MAY BE CAUSED BY A GAP BETWEEN THE EXHAUST HANGER BRACKET AND FLANGE, WHICH ALLOWS MOISTURE TO ENTER AND CAUSE THE EXHAUST STUDS TO RUST AND POSSIBLY BREAK OFF. THE WELDING LOCATION OF THE EXHAUST HANGER BRACKET AND FLANGE HAS BEEN CHANGED TO ENSURE THE HANGER BRACKET AND FLANGE ARE FLUSH WITH NO GAPS TO ALLOW MOISTURE INTRUSION.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10097841 at NHTSA01-025-12
NHTSA communication ID: 10061510
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10061510 at NHTSA01-016-12-2640B
NHTSA communication ID: 10097755
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME VEHICLES MAY EXHIBIT AN UNUSUAL SQUEAK NOISE WHEN THE ENGINE IS IDLING, OR JUST AT THE MOMENT WHEN THE ENGINE IS SHUT OFF. THE NOISE MAY BE AUDIBLE FROM INSIDE THE VEHICLE IF ONE OR MORE WINDOWS ARE OPEN, OR IF ANY PASSENGER IS OPENING A DOOR TO EXIT THE VEHICLE. DUE TO ENGINE VIBRATION AND A LACK OF SEAL RING LUBRICATION, THE MESH IN THE SEAL RING (A) RIDES IN THE FLARED PORTION (B) OF THE CATALYTIC CONVERTER (C) RESULTING IN A SLIGHT NOISE FROM THE EXHAUST SYSTEM WHILE THE ENGINE IS RUNNING. THE FRICTION BETWEEN THE EXHAUST SYSTEM PARTS AND THE RESULTING SLIGHT NOISE ARE NORMAL. THIS FRICTION DOES NOT CAUSE BREAKAGE, GAS LEAKAGE, OR OTHER FUNCTIONAL PROBLEMS WITH THE VEHICLES EXHAUST SYSTEM. DURING NORMAL VEHICLE AGING, THE NOISE LEVEL MAY CHANGE AS THE SURFACE OF THE METAL FLANGE DETERIORATES. USU-ALLY THIS NOISE CANNOT BE HEARD WHEN THE ENGINE IS RUNNING, HOWEVER THE NOISE MAY BE HEARD IN A QUIET ENVIRON-MENT WHEN THE CUSTOMER IS OUTSIDE THE VEHICLE OR WHEN A DOOR OR WINDOW IS OPEN.
Source components: ENGINE.
Source record 10097755 at NHTSA09-028-12-2701B
NHTSA communication ID: 10097754
NHTSA source summary · Original PDF not reviewed by Recallfolio
THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10097754 at NHTSA01-016-12
NHTSA communication ID: 10059442
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10059442 at NHTSAER-6611-K
NHTSA communication ID: 10043372
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: ON CERTAIN MODEL VEHICLES, POWERTRAIN CONTROL MODULE (PCM) WILL BE REPROGRAM FOR AN EMISSION RECALL DUE TO READINESS STATUS CODE BEING INCORRECTLY SET. *PE
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10043372 at NHTSASB-01-005-12
NHTSA communication ID: 10043661
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA SERVICE PROGRAM (MSP27) - READINESS CODE FOR EVAPORATIVE MONITORING SYSTEM. *KB
Source components: ENGINE AND ENGINE COOLING:ENGINE.
Source record 10043661 at NHTSASB-02-001-12
NHTSA communication ID: 10043662
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: TPMS WARNING LIGHT ILLUMINDATED. THIS MAY BE CAUSED BY DAMAGE TO THE VALVE NUT AND/OR VALVE STEM OF THE WHEEL. *KB
Source components: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
Source record 10043662 at NHTSA09-005-11
NHTSA communication ID: 10037949
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: THERE IS POSSIBLE EXCESSIVE CONDENSATION OR WATER INSIDE THE HEADLAMP UNIT ON MANY MAZDA MODELS. *RM
Source components: EXTERIOR LIGHTING:HEADLIGHTS.
Source record 10037949 at NHTSASB-09-057-10
NHTSA communication ID: 10037655
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM
Source components: EXTERIOR LIGHTING · EXTERIOR LIGHTING:HEADLIGHTS:CONCEALMENT DEVICES.
Source record 10037655 at NHTSASB-01-052-10
NHTSA communication ID: 10037413
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: THE MALFUNCTION LIGHT IS ON AND AN INTERNAL TROUBLE CODE. *RM
Source components: ELECTRICAL SYSTEM:WIRING · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10037413 at NHTSASB-07-004-10
NHTSA communication ID: 10037253
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: SOME VEHICLES EXPERERIENCE POOR A/C OR HIGH ENGINE COOLANT TEMPS DURING LOW SPEES OR IDLE. THE SYMPTOMS MAY BE DUE TO A SOFTWARE MALFUNCTION. *RM
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN · ENGINE AND ENGINE COOLING:ENGINE · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10037253 at NHTSASB-09-034-10
NHTSA communication ID: 10033969
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: REAR COMBINATION LIGHT HEAT DEFORMATION. IN WARMER CLIMATES, SOME VEHICLES WITH HALOGEN BULB, REAR, COMBINATION LIGHT ASSEMBLIES MIGHT EXPERIENCE HEAT DEFORMATION OF THE INNER RED LENS. MAY BE CAUSED BY A COMBINATION OF HIGH AMBIENT TEMPERATURES AND THE BRAKE LIGHTS BEING ON FOR AN EXTENDED PERIOD OF TIME. *PE
Source components: EXTERIOR LIGHTING:TAIL LIGHTS.
Source record 10033969 at NHTSASB-09-032-10
NHTSA communication ID: 10033987
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: REAR DOOR LOCKS INOPERATIVE DUE TO FREEZING. WHEN AMBIENT TEMPERATURE RAPIDLY DROP BELOW 0% F, ESPECIALLY AFTER A RAIN OR CAR WASH, SOME VEHICLES MAY EXPERIENCE A REAR DOOR THAT IS UNABLE TO OPEN DUE TO AN INOPERATIVE REAR DOOR LOCK. *PE
Source components: LATCHES/LOCKS/LINKAGES:DOORS:LATCH · STRUCTURE:BODY:DOOR.
Source record 10033987 at NHTSASB-09-008-10
NHTSA communication ID: 10033668
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: WATER LEAK FROM LEFT SIDE A PILLAR/COWL AREA. REPAIR ALL APPLICABLE VEHICLES CURRENTLY IN DEALER INVENTORY ACCORDING TO THE PROCEDURES CONTAINED IN SERVICE BULLETIN. *PE
Source components: STRUCTURE:BODY:ROOF AND PILLARS.
Source record 10033668 at NHTSATSB-09-050-09
NHTSA communication ID: 10031344
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA: CERTAIN VEHICLES CARPETED FLOOR MATS WERE NOT SELECTED AS STANDARD EQUIPMENT ARE MISSING THE FLOOR MAT HOOKS. THE PURPOSE OF THIS CAMPAIGN IS TO INSTALL FLOOR MAT HOOKS IN THESE VEHICLES. MODELS MAZDA6 SV, SPORT, AND TOURING 2010. *PE
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10031344 at NHTSA