The manufacturer’s record · Page 1 of 1

2009 Lincoln MKX
Manufacturer communications & TSBs.Page 1

Original record summaries, dates and identifiers for this model-year. Records 1–21 of 21, ordered newest first. Dated records on this page: Aug 9, 2010–Feb 24, 2026.

Back to 2009 Lincoln MKX problems & recalls
Read the applicability before drawing a conclusion.

This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.

NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.

Feb 24, 2026Service Bulletin/Repair Instructions

SSM 54601

NHTSA communication ID: 11029052

NHTSA source summary · Original PDF not reviewed by Recallfolio

Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k

Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY · UNKNOWN OR OTHER.

Source record 11029052 at NHTSA
Jul 27, 2023Service Bulletin/Repair Instructions

22B05 S1

NHTSA communication ID: 10240415

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2005-2014 Mustang, 2005-2006 GT, 2004-2011 Ranger, 2006-2012 Fusion and MKZ/Zephyr, 2006-2011 Milan, and 2007-2010 Edge & MKX Vehicles Driver & Passenger Airbag Module Quality Control Inspection REASON FOR THIS SUPPLEMENT • Updated Ranger Technical Information to include images of a pass and fail airbag inflator inspection for 2007-2011 model years.

Source components: AIR BAGS.

Source record 10240415 at NHTSA
Apr 4, 2023Service Bulletin/Repair Instructions

SSM 51536

NHTSA communication ID: 10235153

NHTSA source summary · Original PDF not reviewed by Recallfolio

For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.

Source components: STRUCTURE.

Source record 10235153 at NHTSA
Mar 28, 2022Service Bulletin/Repair Instructions

22B05

NHTSA communication ID: 10209374

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2005-2014 Mustang, 2005-2006 GT, 2004-2011 Ranger, 2006-2012 Fusion & MKZ/Zephyr, 2006-2011 Milan, and 2007-2010 Edge & MKX Vehicles Driver & Passenger Airbag Module Quality Control Inspection: Ford Motor Company has determined that some vehicles claimed by dealers as repaired under Takata Airbag Safety Recalls 15S21, 17S42, 18S02, 19S01, and 21S12 may not have received the claimed repairs. The propellant in certain Takata airbag inflators can experience an alteration over time with exposure to certain climate conditions. A combination of time, high temperature fluctuations, and humidity contribute to the degradation of the propellant in the inflators. This degradation can cause the propellant to burn too quickly, creating high pressure inside the inflator, and in extreme cases causing the inflator to rupture in the event of a crash necessitating airbag deployment. A ruptured inflator can send inflator parts toward vehicle occupants resulting in serious injury or death. Additional information regarding Takata recalls can be found at www.nhtsa.gov and www.safercar.gov.

Source components: AIR BAGS.

Source record 10209374 at NHTSA
Jun 3, 2020Service Bulletin/Repair Instructions

DOR-M9J4S-07

NHTSA communication ID: 10177599

NHTSA source summary · Original PDF not reviewed by Recallfolio

These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.

Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.

Source record 10177599 at NHTSA
Apr 11, 2018Service Bulletin/Repair Instructions

SSM 47230

NHTSA communication ID: 10137131

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2007-2016 Edge/MKX/Flex/MKT/MKZ/MKS/Taurus/Police Interceptor Sedan/Explorer/Police Interceptor Utility vehicles equipped with AWD and built on or before 30-Jun-2016 may exhibit a propane or natural gas odor during idle or low speed driving. This may be due to break down of the power transfer unit (PTU) fluid caused by excessive heat. If the source of the odor is identified as originating from the PTU, an idler bearing repair kit is available to repair the PTU. Refer to the Workshop Manual (WSM), Section 308-07. If the PTU is determined to be repairable, utilize kit GB5Z-7P258-A and the included instruction sheet. For claiming use causal part 7P258 and applicable labor operations in section 07 of the Service Labor Time Standards (SLTS) Manual.

Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.

Source record 10137131 at NHTSA
Mar 30, 2018Service Bulletin/Repair Instructions

SSM 47201

NHTSA communication ID: 10137113

NHTSA source summary · Original PDF not reviewed by Recallfolio

Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab  select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab  select Dealer Installed Accessory or Accessory Installation.

Source components: EQUIPMENT.

Source record 10137113 at NHTSA
Jan 10, 2018Service Bulletin/Repair Instructions

SSM 47009

NHTSA communication ID: 10140323

NHTSA source summary · Original PDF not reviewed by Recallfolio

The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.

Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL.

Source record 10140323 at NHTSA
Jan 10, 2018Service Bulletin/Repair Instructions

SSM 47009

NHTSA communication ID: 10138524

NHTSA source summary · Original PDF not reviewed by Recallfolio

The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.

Source components: EQUIPMENT:ELECTRICAL.

Source record 10138524 at NHTSA
Feb 27, 2017Service Bulletin/Repair Instructions

SSM 46412

NHTSA communication ID: 10095858

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2007-2016 EDGE/MKX/FLEX/MKT/MKZ/MKS/TAURUS/TAURUS POLICE/EXPLORER/EXPLORER POLICE EQUIPPED WITH ALL WHEEL DRIVE (AWD) AND BUILT ON OR BEFORE 30-JUN-2016 MAY EXHIBIT A TICKING AND/OR KNOCKING NOISE COMING FROM THE DRIVELINE AREA. TO IDENTIFY THIS NOISE, REFER TO WORKSHOP MANUAL (WSM), SECTION 100-04, AND FOLLOW THE SYMPTOM CHART. IF THE SOURCE OF THE NOISE IS IDENTIFIED AS THE PTU AND/OR INTERNAL TO THE PTU, DISASSEMBLE PTU ASSEMBLY. REFER TO UPDATED WSM, SECTION 308-07. IF THE PTU IS DETERMINED TO BE REPAIRABLE, UTILIZE KIT GB5Z-7P258-A AND THE INCLUDED INSTRUCTION SHEET. FOR CLAIMING, USE CAUSAL PART 7P258 AND APPLICABLE LABOR OPERATIONS IN SECTION 07 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN:DRIVELINE.

Source record 10095858 at NHTSA
Jan 24, 2017Service Bulletin/Repair Instructions

SSM 46332

NHTSA communication ID: 10095184

NHTSA source summary · Original PDF not reviewed by Recallfolio

REPLACING THE ORIGINAL EQUIPMENT SYNC/NAVIGATION SYSTEM WITH EITHER AN AFTERMARKET SYNC/NAVIGATION KIT OR MODIFYING ORIGINAL SYNC/NAVIGATION PARTS TO PROVIDE ADDITIONAL FEATURES IS NOT RECOMMENDED NOR SUPPORTED ON ANY FORD, MERCURY OR LINCOLN VEHICLE. ONLY APPROVED GENUINE FORD ACCESSORIES OR ORIGINALLY INSTALLED SYSTEMS ARE SUPPORTED AND CERTIFIED TO FUNCTION CORRECTLY WITH OTHER VEHICLE SYSTEMS. IF YOU SUSPECT A SYSTEM HAS BEEN MODIFIED, THE FOLLOWING RESOURCES CAN BE USED TO VERIFY ORIGINAL EQUIPMENT: MONRONEY LABEL (WINDOW STICKER), PROFESSIONAL TECHNICIAN SOCIETY (PTS) OASIS TAB  SELECT SYNC OR HVBOM. FOR GENUINE FORD ACCESSORIES USE: PTS WORKSHOP TAB  SELECT DEALER INSTALLED ACCESSORY OR ACCESSORY INSTALLATION.

Source components: EQUIPMENT.

Source record 10095184 at NHTSA
Oct 17, 2016Service Bulletin/Repair Instructions

SSM 46132

NHTSA communication ID: 10091151

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2008-2017 FORD/MERCURY/LINCOLN VEHICLES EQUIPPED WITH SYNC MAY GENERATE A VHR THAT IDENTIFIES A CONCERN WITH THE BRAKES AND SUSPENSION CATEGORY INDICATING SERVICE IS REQUIRED DUE TO A BRAKE SYSTEM WARNING LAMP BEING ILLUMINATED. IF THE PARK BRAKE WAS APPLIED WHEN THE VHR WAS GATHERING DATA FROM THE MAJOR VEHICLE SYSTEMS, THE BRAKES AND SUSPENSION MESSAGE WILL BE REPORTED AS THE VHR LOOKS FOR ANY WARNING LAMPS ILLUMINATED IN THE INSTRUMENT CLUSTER. RERUN THE VHR WITH THE ENGINE ON AND VEHICLE IN PARK, AND ENSURE THE PARK BRAKE IS DISENGAGED. IF THE SYNC VHR IS STILL REPORTING A CONCERN TO THE CUSTOMERS SYNC OWNERS ACCOUNT, REFER TO THE APPROPRIATE WORKSHOP MANUAL SECTION FOR DIAGNOSIS BY DTC OR SYMPTOM. STARTING IN 2015 NOT ALL SYNC EQUIPPED VEHICLES SUPPORT VHR, REFER TO THE OWNERS MANUAL FOR VHR OPERATION.

Source components: SERVICE BRAKES.

Source record 10091151 at NHTSA
Oct 17, 2016Service Bulletin/Repair Instructions

SSM 46132

NHTSA communication ID: 10090681

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2008-2017 FORD/MERCURY/LINCOLN VEHICLES EQUIPPED WITH SYNC MAY GENERATE A VHR THAT IDENTIFIES A CONCERN WITH THE BRAKES AND SUSPENSION CATEGORY INDICATING SERVICE IS REQUIRED DUE TO A BRAKE SYSTEM WARNING LAMP BEING ILLUMINATED. IF THE PARK BRAKE WAS APPLIED WHEN THE VHR WAS GATHERING DATA FROM THE MAJOR VEHICLE SYSTEMS, THE BRAKES AND SUSPENSION MESSAGE WILL BE REPORTED AS THE VHR LOOKS FOR ANY WARNING LAMPS ILLUMINATED IN THE INSTRUMENT CLUSTER. RERUN THE VHR WITH THE ENGINE ON AND VEHICLE IN PARK, AND ENSURE THE PARK BRAKE IS DISENGAGED. IF THE SYNC VHR IS STILL REPORTING A CONCERN TO THE CUSTOMERS SYNC OWNERS ACCOUNT, REFER TO THE APPROPRIATE WORKSHOP MANUAL SECTION FOR DIAGNOSIS BY DTC OR SYMPTOM. STARTING IN 2015 NOT ALL SYNC EQUIPPED VEHICLES SUPPORT VHR, REFER TO THE OWNERS MANUAL FOR VHR OPERATION.

Source components: SERVICE BRAKES.

Source record 10090681 at NHTSA
Sep 21, 2016Service Bulletin/Repair Instructions

SSM 46085

NHTSA communication ID: 10109070

NHTSA source summary · Original PDF not reviewed by Recallfolio

The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.

Source components: ENGINE · ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:COOLING SYSTEM · ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN · ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS · ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY · ENGINE AND ENGINE COOLING:ENGINE · ENGINE AND ENGINE COOLING:ENGINE:DIESEL · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER · ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV) · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.

Source record 10109070 at NHTSA
Apr 28, 2016Service Bulletin/Repair Instructions

15S31

NHTSA communication ID: 10076519

NHTSA source summary · Original PDF not reviewed by Recallfolio

Fuel Tank Corrosion Inspection and Repair REASON FOR THIS PROGRAM In some of the affected vehicles which are operated in high-corrosion environments associated with road salt use, moisture and salt may become trapped under the fuel tank mounting reinforcement brackets at the four corners where the fuel tank is attached to the vehicle. Over time, corrosion under these reinforcement brackets can spread to the fuel tank which can result in a fuel leak. A fuel leak in the presence of an ignition source may result in a fire. Owners that operate their vehicle in a corrosive environment (e.g., where road salt is used in winter months) or have concerns about their fuel tank are eligible for a repair under this Regional Program.

Source components: FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY.

Source record 10076519 at NHTSA
Apr 28, 2016Service Bulletin/Repair Instructions

15RO2

NHTSA communication ID: 10076298

NHTSA source summary · Original PDF not reviewed by Recallfolio

Recall 15S31 Fuel Tank Corrosion Inspection and Repair In some of the affected vehicles which are operated in high-corrosion environments associated with road salt use, moisture and salt may become trapped under the fuel tank mounting reinforcement brackets at the four corners where the fuel tank is attached to the vehicle. Over time, corrosion under these reinforcement brackets can spread to the fuel tank which can result in a fuel leak. A fuel leak in the presence of an ignition source may result in a fire. Owners that operate their vehicle in a corrosive environment (e.g., where road salt is used in winter months) or have concerns about their fuel tank are eligible for a repair under this Regional Program.

Source components: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY.

Source record 10076298 at NHTSA
May 3, 2014Service Bulletin/Repair Instructions

TSB-14-0098

NHTSA communication ID: 10056003

NHTSA source summary · Original PDF not reviewed by Recallfolio

FORD/LINCOLN: SOME VEHICLES ARE EXPERIENCING A TYPE OF NOISE, A HOWL OR GROWL, EMITTING FROM THE DRIVER OR PASSENGER REAR WHEEL AREA. MODEL 2007-2010 EDGE, MKX. *PE

Source components: WHEELS.

Source record 10056003 at NHTSA
Nov 1, 2013Service Bulletin/Repair Instructions

ASI-44308

NHTSA communication ID: 10054565

NHTSA source summary · Original PDF not reviewed by Recallfolio

FORD/LINCOLN: THE BANJO FITTING THAT IS ATTACHING PRESSURE HOSE TO STEERING GEAR IS EXPERIENCING A POWER STEERING FLUID LEAKAGE. MODEL 2008-2013 EDGE, MKX. *PE

Source components: STEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID.

Source record 10054565 at NHTSA
May 27, 2013Service Bulletin/Repair Instructions

TSB-13-5-27

NHTSA communication ID: 10053274

NHTSA source summary · Original PDF not reviewed by Recallfolio

FORD/LINCOLN: ON SOME VEHICLES, TRANSMISSION 5TH GEAR START AT STOP, SPEED CONTROL DROPS OR INOPERATIVE, BACKUP CAMERA ON IN DRIVE, 5TH GEAR START FROM STOP AND TRANSMISSION SLIPPING OR NEUTRAL OUT, DUE TO DIGITAL TRANSMISSION RANGE (TR) SENSOR HIGH RESISTANCE. MODELS 2009-11 EDGE, TAURUS, FLEX; 2009-11 MKS, MKX, MKT. *PE

Source components: POWER TRAIN:MANUAL TRANSMISSION.

Source record 10053274 at NHTSA
May 10, 2011Service Bulletin/Repair Instructions

TSB-11-5-6

NHTSA communication ID: 10039121

NHTSA source summary · Original PDF not reviewed by Recallfolio

FORD: THERE MAY BE A SLUGGISH ACCELERATION OR HESITATION FEELING WHEN ROLLING TO A STOP. THIS WILL BE FOLLOWED BY A HARSH BUMP. *RM

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10039121 at NHTSA
Aug 9, 2010Service Bulletin/Repair Instructions

TSB-10-16-1

NHTSA communication ID: 10039155

NHTSA source summary · Original PDF not reviewed by Recallfolio

FORD: THERE MAY BE A ROUGH IDLE OR MISSES WHILE THE MALFUNCTION LIGHT IS ON. THERE ARE MUTLIPLE POSSIBLE TROUBLE CODES STORED. *RM

Source components: ENGINE AND ENGINE COOLING:ENGINE.

Source record 10039155 at NHTSA