2001 Kia SEPHIA Manufacturer communications & TSBs.Page 1
Original record summaries, dates and identifiers for this model-year. Records 1–11 of 11, ordered newest first. Dated records on this page: Jan 1, 2001–Sep 13, 2021.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Sep 13, 2021Service Bulletin/Repair Instructions
TSB_BOD055_R1
NHTSA communication ID: 10201529
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.
NHTSA source summary · Original PDF not reviewed by Recallfolio
PITSTOP - ENGINE COMPONENT RE-USE GUIDELINES - In general, parts and components removed during engine repairs should be considered serviceable, and should be thoroughly cleaned and transferred to the new engine.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners, which are designed to lock into place once fully attached, are utilized in various Kia models and are strictly intended for ?one time use.? Some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.? It is critical for technicians to be aware that ALL such locking fasteners, regardless of type, are for ?one time use? only.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners utilized in various Kia models are strictly intended for ?one time use?. Though not limited to the following, some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.?
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB: AUTOMATIC TRANSMISSION FLUID APPLICATION GUIDE - THIS BULLETIN PROVIDES INFORMATION RELATING TO THE CORRECT AUTOMATIC TRANSMISSION FLUIDS THAT ARE REQUIRED FOR EACH KIA MODEL. REFER TO THE SHOP MANUAL ON KGIS FOR THE SPECIFIC KIA MODEL, THEN REFERENCE THE AUTOMATIC TRANSAXLE SYSTEM/ REPAIR PROCEDURES/ INSPECTION AND ADJUSTMENT SECTION FOR THE CORRECT ATF CHECK/FILL PROCEDURES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
KIA: ALL MODELS. ARTICLE PROVIDES INFORMATION RELATING TO THE IMPROVED DURABILITY OF BULB LIFE FOR REAR COMBINATION BULB; REAR STOP LAMP/TAIL LAMP BULB UTILIZED ON MULTIPLE KIA MODELS. *PE