The vehicle dossier US · 2006
2006 Kia
SEDONAProblems & recalls
385 distinct owner reports in the NHTSA snapshot. Other components appears in 131 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 385 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
83,500 miles is the median among 317 reports with usable mileage. The middle half spans 38,944–120,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
7 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
ELECTRICAL SYSTEMCampaign 20V088000
Reported concern
Kia Motors America (Kia) is recalling certain 2006-2010 Sedona and 2007-2009 Sorento vehicles. Moisture may enter the Anti-lock Brake (ABS) Module and result in an electrical short.
Manufacturer’s stated response
Kia will notify owners, and dealers will install a relay in the main junction box to prevent power from being directed to the HECU when the vehicle's ignition switch is turned off, free of charge. The recall began June 5, 2020. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC186.
Manufacturer campaign: SC186
Read campaign 20V088000 at NHTSALATCHES/LOCKS/LINKAGES:HOOD:LATCHCampaign 16V389000
Reported concern
Kia Motors Corporation (Kia) is recalling certain model year 2006-2014 Kia Sedona vehicles manufactured from June 15, 2005, through April 04, 2014. In the affected vehicles, the secondary hood latch may bind and remain in the unlatched position when the hood is closed.
Manufacturer’s stated response
Kia will notify owners and dealers will replace the secondary hood latch or clean and lubricate the latch, depending on the vehicle's location and the condition of the latch. These repairs will be performed free of charge. The recall began on July 27, 2016. Owners may contact Kia at 1-800-333-4542. Kia's recall number is SC134.
Manufacturer campaign: SC134
Read campaign 16V389000 at NHTSASUSPENSION:FRONT:CONTROL ARM:LOWER ARMCampaign 16V387000
Reported concern
Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 and originally sold in, or currently registered in Alaska, Connecticut, Delaware, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, New Hampshire, New Jersey, New York, North Dakota, Ohio, Pennsylvania, Rhode Island, South Dakota, Utah, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion from salt water exposure such as from road salt use.
Manufacturer’s stated response
Kia will notify owners and dealers will replace the front lower control arms on 2006-2007 models. 2008-2012 models will either have their front lower control arms replaced or additional anti-corrosion coating will be applied. These repairs will be performed free of charge. The recall began on July 27, 2016. Owners may contact Kia at 1-800-333-4542. Kia's number for this recall is SC133.
Manufacturer campaign: SC133
Read campaign 16V387000 at NHTSASUSPENSION:FRONT:CONTROL ARM:LOWER ARMCampaign 13V550000
Reported concern
Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 originally sold in, or currently registered in Massachusetts, Maryland, Michigan, New Hampshire, New York, Pennsylvania, Vermont, Wisconsin, Connecticut, Delaware, Iowa, Illinois, Indiana, Maine, Minnesota, Missouri, New Jersey, Ohio, Rhode Island, West Virginia or the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion resulting from prolonged exposure to salty environments.
Manufacturer’s stated response
Kia will notify owners and dealers will inspect the degree of corrosion of the front lower control arms, and will either rustproof or replace them, free of charge. The recall began on December 20, 2013. Owners may contact Kia at 1-800-333-4542. Kia's recall number is SC100.
Manufacturer campaign: SC100
Read campaign 13V550000 at NHTSAEXTERIOR LIGHTING:BRAKE LIGHTS:SWITCHCampaign 09V130000
Reported concern
HUYNDAI-KIA IS RECALLING 139,844 MY 2006-2007- SEDONA, SPORTAGE, SORENTO AND MY RONDO AND AMANTI VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A STOP LAMP SWITCH MALFUNCTION MAY ALSO AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION SHIFTER WOULD NOT BE ABLE TO BE SHIFTED OUT OF THE PARK POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED.
Manufacturer’s stated response
DEALERS WILL REPLACE THE STOP LAMP SWITCH FREE OF CHARGE. THE RECALL BEGAN ON JUNE 17, 2009. OWNERS MAY CONTACT KIA'S CONSUMER ASSISTANCE CENTER AT 1-800-333-4542.
Manufacturer campaign: SC077
Read campaign 09V130000 at NHTSAELECTRICAL SYSTEM:WIRINGCampaign 06V349000
Reported concern
ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH ADJUSTABLE BRAKE PEDALS, THE STOP LAMP SWITCH WIRING HARNESS MAY BE OUT OF POSITION. AN IMPROPERLY POSITIONED STOP LAMP SWITCH WIRING HARNESS COULD MAKE CONTACT WITH THE U-JOINT ASSEMBLY OF THE STEERING COLUMN. REPEATED CONTACT MAY EVENTUALLY CAUSE THE WIRING HARNESS INSULATION TO CHAFE.
Manufacturer’s stated response
DEALERS WILL INSPECT THE WIRING HARNESS FOR CHAFING AND, REPAIR IF NECESSARY. IN ADDITION, THE DEALER WILL SECURE THE WIRING HARNESS TO PREVENT CONTACT WITH THE U-JOINT ASSEMBLY. THE RECALL BEGAN ON SEPTEMBER 29, 2006. OWNERS MAY CONTACT KIA AT 1-800-333-4542.
Manufacturer campaign: SC065
Read campaign 06V349000 at NHTSASERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGSCampaign 06V265000
Reported concern
ON CERTAIN PASSENGER VEHICLES, THE REAR CALIPER BRAKE HOSES MAY BE OUT OF POSITION. AN IMPROPERLY POSITIONED REAR CALIPER BRAKE HOSE MAY CONTACT REAR SUSPENSION COMPONENTS AND OVER TIME BREACH THE INTEGRITY OF THE HOSE.
Manufacturer’s stated response
DEALERS WILL INSPECT THE POSITIONING OF THE REAR CALIPER BRAKE HOSES AND ADJUST OR REPLACE THEM FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 15, 2006. OWNERS MAY CONTACT KIA AT 1-800-333-4542.
Manufacturer campaign: SC061
Read campaign 06V265000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
40 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
TSB_BOD055_R1TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin…NHTSA ID 10201529
TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.
Components: EXTERIOR LIGHTING · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10201529 at NHTSATSB_BOD051_CLSDTSB_BOD051_CLOSED: TECHNICAL SERVICE BULLETIN CLOSEDNHTSA ID 10195109
TSB_BOD051_CLOSED: TECHNICAL SERVICE BULLETIN CLOSED
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10195109 at NHTSADOR-M9J4S-07These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standard…NHTSA ID 10177599
These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.
Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. Confirm detailed applicability in the original document.
Source record 10177599 at NHTSADOR-M3J3F-07These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standard…NHTSA ID 10177598
These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.
Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. Confirm detailed applicability in the original document.
Source record 10177598 at NHTSATSB_TRA046_R1TECHNICAL SERVICE BULLETIN: - TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. This bulletin provides information relating to the correct transmission fluid type and fill …NHTSA ID 10174520
TECHNICAL SERVICE BULLETIN: - TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles on page 2. Refer to the shop manual on KGIS for the specific Kia model for the correct transmission fluid check/fill procedures.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10174520 at NHTSAPS539PITSTOP - ENGINE COMPONENT RE-USE GUIDELINES - In general, parts and components removed during engine repairs should be considered serviceable, and should be thoroughly cleaned and transferred to the new engine.NHTSA ID 10133170
PITSTOP - ENGINE COMPONENT RE-USE GUIDELINES - In general, parts and components removed during engine repairs should be considered serviceable, and should be thoroughly cleaned and transferred to the new engine.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10133170 at NHTSATSBBOD107R1TSB: FRONT DOOR GLASS RUN CHANNEL REPLACEMENT - This bulletin provides information on some Sedona (VQ) vehicles, produced from June 15, 2005 through May 06, 2013, which may experience wind noise coming from the front door windo…NHTSA ID 10116109
TSB: FRONT DOOR GLASS RUN CHANNEL REPLACEMENT - This bulletin provides information on some Sedona (VQ) vehicles, produced from June 15, 2005 through May 06, 2013, which may experience wind noise coming from the front door window/door frame area, at highway speeds, and/or glass run channel deformation caused by improper sealing of the front windows. To correct this concern, follow the procedure outlined in this bulletin to replace the left and right side front door glass run channels.
Components: STRUCTURE · STRUCTURE:BODY:DOOR. Confirm detailed applicability in the original document.
Source record 10116109 at NHTSATSB-GEN085R1TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners, which are designed to lock into place once fully attached, are utilized in various Kia models and are strictly intended for ?one time use.?…NHTSA ID 10109812
TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners, which are designed to lock into place once fully attached, are utilized in various Kia models and are strictly intended for ?one time use.? Some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.? It is critical for technicians to be aware that ALL such locking fasteners, regardless of type, are for ?one time use? only.
Components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:MECHANICAL. Confirm detailed applicability in the original document.
Source record 10109812 at NHTSATSB-GEN085TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners utilized in various Kia models are strictly intended for ?one time use?. Though not limited to the following, some examples are: axle shaft …NHTSA ID 10109777
TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners utilized in various Kia models are strictly intended for ?one time use?. Though not limited to the following, some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.?
Components: EQUIPMENT ADAPTIVE/MOBILITY · LATCHES/LOCKS/LINKAGES. Confirm detailed applicability in the original document.
Source record 10109777 at NHTSAPS266R1PITSTOP: HVAC RECEIVER/DRYER - DESICCANT REPLACEMENT - IN THE EVENT OF A HVAC SYSTEM CONCERN IN WHICH METAL PARTICLES OR SHARDS HAVE CONTAMINATED THE SYSTEM, THE DESICCANT OR THE ENTIRE A/C RECEIVER/DRYER ASSEMBLY MAY NEED TO B…NHTSA ID 10090945
PITSTOP: HVAC RECEIVER/DRYER - DESICCANT REPLACEMENT - IN THE EVENT OF A HVAC SYSTEM CONCERN IN WHICH METAL PARTICLES OR SHARDS HAVE CONTAMINATED THE SYSTEM, THE DESICCANT OR THE ENTIRE A/C RECEIVER/DRYER ASSEMBLY MAY NEED TO BE REPLACED. THIS IS DUE TO THE FACT THAT IT MAY BE IMPOSSIBLE TO REMOVE ALL METAL CONTAMINANTS FROM THE RECEIVER/DRYER DURING THE A/C FLUSHING PROCEDURE. REFER TO THE INCLUDED TABLE FOR DETAILED INFORMATION ON COMPONENT REPLACEMENT BY MODEL. IF YOU SUSPECT A PLUGGED EXPANSION VALVE, THE INLET SCREENS CAN BE CLEANED. IF THE VALVE IS NOT EQUIPPED WITH AN INLET SCREEN AND IS RESTRICTED, THE EXPANSION VALVE MAY ALSO NEED TO BE REPLACED.
Components: EQUIPMENT:APPLIANCE:AIR CONDITIONER. Confirm detailed applicability in the original document.
Source record 10090945 at NHTSAPS443TSB - USE OF AFTERMARKET USB CHARGING CABLES IN USB/12V PORTS - This article provides information regarding the use of USB ports and 12V power outlets to connect/charge mobile phones. Customers may experience issues with their …NHTSA ID 10183431
TSB - USE OF AFTERMARKET USB CHARGING CABLES IN USB/12V PORTS - This article provides information regarding the use of USB ports and 12V power outlets to connect/charge mobile phones. Customers may experience issues with their head units that may be related to the use of aftermarket USB charging cables, including; * Electrical interference and limited or no functionality when attempting to play music, or when charging a device through the USB port * Excessive static or noise when listening to the audio source * Malfunctions and screen freeze of the head unit screen * Slow down of the system response while device is plugged in * Music will not play from iPhone 5 or 6 with Kia iPod cable and aftermarket adapter * No or limited functionality when trying to play music from an Apple device
Components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY. Confirm detailed applicability in the original document.
Source record 10183431 at NHTSATSB-BOD107TSB: COMBINED TSB/SERVICE ACTION: FRONT DOOR GLASS RUN CHANNEL REPLACEMENT (SA167) - This bulletin provides information on some Sedona (VQ) vehicles, produced from June 15, 2005 through May 06, 2013, which may experience wind n…NHTSA ID 10109735
TSB: COMBINED TSB/SERVICE ACTION: FRONT DOOR GLASS RUN CHANNEL REPLACEMENT (SA167) - This bulletin provides information on some Sedona (VQ) vehicles, produced from June 15, 2005 through May 06, 2013, which may experience wind noise coming from the front door window/door frame area, at highway speeds, and/or glass run channel deformation caused by improper sealing of the front windows.
Components: STRUCTURE:BODY:DOOR · STRUCTURE:FRAME AND MEMBERS · VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Confirm detailed applicability in the original document.
Source record 10109735 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.