2022 Jeep GRAND CHEROKEE Manufacturer communications & TSBs.Page 2
Original record summaries, dates and identifiers for this model-year. Records 101–200 of 588, ordered newest first. Dated records on this page: May 31, 2025–Feb 14, 2026.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Feb 14, 2026Service Bulletin/Repair Instructions
S1408000384 REV.I
NHTSA communication ID: 11028904
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders, Warranty, Mopar, Customer Pay and Service Contract. Order "68" part number for New, Unsold units only.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Any 2021-2022MY WL that has the right power liftgate anti-pinch sensor or power liftgate module(PLGM) replaced, both components need to be replaced as a pair.
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Not applicable to vehicles built for US market. R1H Radio U40.20 USB Software Update - Korea Customers may experience one or more of the following: ● T-maps navigation feature is intermittently not available due to map loading. ● When the navigation speed alarm margin is set and the while driving the vehicle between the speed limit and the set margin, the navigation speed alarm will sound off continuously and the user is unable to control the volume. ● After setting a navigation destination and then the customer is following the navigation route, the navigation system will stop operating. ● Navigation touch screen menu is inoperable after setting a navigation destination. The home screen widget will be black and the navigation display map will no longer show the navigation route. ● WI-FI software update pop up is being triggered in non connected vehicles. ● Vehicle Forward Collision Warning must have two options: OFF / Warning + Active Braking. ● Temperature shows at upper left and right of center display highlights opposite side of what temperature hard switch is pressed. Affects Right Hand Drive RHD only. ● With ignition on and radio on, the radio display freezes then restarts (Rearview Camera (RVC) functions normally). ● Radio is taking more than one minute to start after starting the engine (RVC functions normally). ● System displays a blank screen in E-Hybrid tab when user switches into dark-theme mode (RVC functions normally). This bulletin involves inspecting and if required, updating the radio software level to U40.20. Depending on the radio's current software level the radio may need a one or two USB update. M08 FSAR-RSU-6722 -2-
NHTSA source summary · Original PDF not reviewed by Recallfolio
Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders, Warranty, Mopar, Customer Pay and Service Contract. Order "68" part number for New, Unsold units only.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Note: actual release date was 12/22/2025 The customer is experiencing a clicking or pop noise from the steering knuckle and bearing area during turns while driving.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Number is more precise than "Up to and Including" and "After" dates in the item description. Please ensure to order the correct CADM and Long Range Camera Part Number(s) the vehicle was built with. The Root of the Original and Replacement part should be identical, the difference will be in the NIK level. Technician Removal of the Long Range Camera and CADM for Testing Purposes: Please ensure the root of the Original and Replacement part are identical.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Telematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present Technicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
If the DTC B1E21-96: Backup Battery-Component Internal Failure is active and customer states Popup message will show at the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347
NHTSA source summary · Original PDF not reviewed by Recallfolio
Telematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present echnicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure
NHTSA source summary · Original PDF not reviewed by Recallfolio
R1H Radio U33.43 USB Software Update Customers may experience one or more of the following: ● Unable to select the Turn by Turn Navigation. ● Blank Performance Pages (Rearview Camera (RVC) Functions Normally). ● Android Auto® Voice Recognition (VR) inoperative. ● Media tuner delayed. ● Charge Schedule not accepting updates via phone (RVC Functions Normally). ● Ambient light inoperative. ● Map in Instrument Panel Cluster (IPC) inoperative. ● Media Widget blank. ● Navigation map black. ● Off-Road Pages inoperative (RVC Functions Normally). ● VR inoperative. ● Incorrect song title displayed (Carplay® only). ● Radio display switches from Media Page to Home Page (RVC Functions Normally). ● Ghost touch on Navigation screen (RVC Functions Normally). ● Widgets missing. ● New User Profile does not load. ● Returns to wrong page after View Camera Event selected by customer in the Camera View Pages (RVC Functions Normally) This bulletin involves inspecting and if required, updating the radio software level to U33.43. Depending on the radio's current software level the radio may need a one or two USB update
NHTSA source summary · Original PDF not reviewed by Recallfolio
Before replacing any parts please refer to SOL S2518000008 if it applies to the vehicle you are working on based on a VIN search in Service Library. Before replacing this part due to Engine Light On with P1CEA (Boost Side EVAP Purge System Performance), check for: 1) Improperly connected or kinked/pinched Purge Hoses at the Ejector Tees on the Air Box or Duct. 2) Improperly connected or kinked/pinched Purge Hose at the Purge Solenoid or OBD Valve. 3) Improperly connected or kinked/pinched Purge Hose at the Intake. 4) Check for the correct Purge Hoses installation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Not applicable to vehicles built for US market. Radio USB Update to U40.20 Customers may experience one or more of the following: ● Temperature displayed in the radio display screen and rear HVAC are mismatched. ● Auto door locks are inoperable. This bulletin involves inspecting and if required, updating the radio software level to U40.20. Depending on the radio’s current software level the radio may need a one or two USB update.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Not applicable to vehicles built for US market. R1H Radio U40.20 USB Software Update - Korea Customers may experience one or more of the following: ● **T-maps navigation feature is intermittently not available due to map loading. ● When the navigation speed alarm margin is set and the while driving the vehicle between the speed limit and the set margin, the navigation speed alarm will sound off continuously and the user is unable to control the volume. ● After setting a navigation destination and then the customer is following the navigation route, the navigation system will stop operating. ● Navigation touch screen menu is inoperable after setting a navigation destination. The home screen widget will be black and the navigation display map will no longer show the navigation route.** ● WI-FI Software update pop up is being triggered in non connected vehicles. ● Vehicle Forward Collision Warning must have two options: OFF/ Warning + Active Braking. ● Temperature shows at upper left and right of center display highlights opposite side of what temperature hard switch is pressed. Affects RHD only. ● With key on and radio on, The radio display freezes then restarts (Rearview Camera (RVC) functions normally). ● Radio is taking more than one minute to start after starting the engine (RVC functions normally). ● System displays a blank screen in E-Hybrid tab when user switches into dark-theme mode (RVC functions normally). This bulletin involves inspecting and if required, updating the radio software level to **U40.20**. Depending on the radio's current software level the radio may need a one or two USB update
NHTSA source summary · Original PDF not reviewed by Recallfolio
Not applicable to vehicles built for US market. R1H Radio U40.20 USB Software Update Customers may experience one or more of the following: ● **Temperature displayed in the radio display and rear HVAC are mismatched.** ● Wi-fi Software update pop-up is being triggered in non connected vehicles. ● Radio freezes and then restarts. ● Head Unit (HU) freezes and then restarts. ● HU is taking more than one minute to start after starting the engine. ● System displays blank screen in E-Hybrid tab when user switched to dark theme mode. Rearview Camera (RVC) functions normally. This bulletin involves inspecting and if required, updating the radio software level to **U40.20**. Depending on the radio’s current software level the radio may need a one or two step USB update
NHTSA source summary · Original PDF not reviewed by Recallfolio
Data collection required for all 2020-2026MY vehicles with 3.6L PSU engines during any of their first 3 engine oil changes. This data collection is applicable to all vehicle with engines with sales codes: ERG, ERC, EH3 and ERF. To assist with monitoring and quality improvement of the 3.6L engine, every time a vehicle comes for any of the first 3 oil changes, please use wiTECH to record the total engine idle time and the total engine runtime. 1. Prior to perform the oil change connect wiTECH diagnostic tool. 2. Navigate to the topology screen on the action item section. 3. Once the topology screen loads, disconnect wiTECH and continue with oil change.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Amplifier (AMP) Diagnostic and System Updates Customers may experience one or more of the following: ● **Droning noises coming out of the speakers at specific RPMs that range from 1200 to 1800 RPM. Probability of occurence is most likely during cold ambient temperatures.** ● High pitched noise at start up or idle under cold conditions. This bulletin involves updating the AMP with the latest available software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order "68" part number for New unsold units only.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Exterior Front Lamps Condensation Clearing Procedure *Some customers may report that on occasion vehicle exterior front lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*
NHTSA source summary · Original PDF not reviewed by Recallfolio
Extended Crank Condition Due To Loss of Fuel Pressure Customers may experience the following: ● Extended engine crank condition. This bulletin involves performing a fuel pressure test and possibly replacing the **fuel pressure regulator**.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Not applicable to vehicles built for US market. R1H Radio U33.43 USB Software Update Customers may comment on one or more of the following: ● WI-FI Software update pop up is being triggered in non connected vehicles. ● Vehicle Forward Collision Warning must have two options: OFF/ Warning + Active Braking. ● Temperature shows at upper left and right of center display highlights opposite side of what temperature hard switch is pressed. Affects RHD only. ● With key on and radio on, The radio display freezes then restarts. ● Radio is taking more than one minute to start after starting the engine. ● System displays a blank screen in E-Hybrid tab when user switches into dark-theme mode This bulletin involves inspecting and if required, updating the radio software level to U33.43. Depending on the radio’s current software level the radio may need a one or two step USB update
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
NHTSA source summary · Original PDF not reviewed by Recallfolio
Not applicable to vehicles built for US market. R1H Radio U33.43 USB Software Update Customers may experience one or more of the following: ● Wi-fi Software update pop-up is being triggered in non connected vehicles. ● Radio freezes and then restarts. ● Head Unit (HU) freezes and then restarts. ● HU is taking more than one minute to start after starting the engine. ● System displays blank screen in E-Hybrid tab when user switched to dark theme mode. This bulletin involves inspecting and if required, updating the radio software level to U33.43. Depending on the radio’s current software level the radio may need a one or two step USB update.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
To inform dealers about the 850RE valve body PN: R8348504A connector: the original 16-pin connector included six pins that were not used in this application. To simplify the design, the connector has been optimized and updated to a 10-pin configuration.
NHTSA source summary · Original PDF not reviewed by Recallfolio
850RE D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must have at least 11,265 km (7,000 mi.) and exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear This bulletin involves replacing the D clutch.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When replacing a camshaft and parts kit (P/N 68661146xx and/or 68661147xx), it is NOT necessary to order the roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Display Verify Z part number availability. Order a Z part number for all Exchange Orders: Warranty, Mopar, customer pay and service contract. Order regular part number for New unsold units only.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power brake booster To avoid potential charge-back, only use MOPAR approved brake fluid per the service manual. When filling the brake reservoir, use clean equipment and gloves during repair to avoid cross-contamination.
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Spark Knock/Engine Symptoms Customers may experience the following: ● Knocking or pinging noise coming from the engine upon acceleration. This bulletin involves cleaning the piston heads and cylinder head combustion chambers to resolve a spark knock condition being caused by oil intrusion through the PCV system."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"12 Channel Amplifier Popping Noise Sound Customers may experience the following: ● Popping sound coming from the speakers during engine start/run. This bulletin involves replacing the Audio Amplifier."