The vehicle dossier US · 2003
2003 Hyundai
TIBURONProblems & recalls
328 distinct owner reports in the NHTSA snapshot. Transmission & drivetrain appears in 164 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 328 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
44,147 miles is the median among 264 reports with usable mileage. The middle half spans 20,500–74,184 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
9 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
SUSPENSION:FRONT:CONTROL ARMCampaign 09V125000
Reported concern
HYUNDAI IS RECALLING 160,904 MY 2001-2003 ELANTRA AND MY 2003 TIBURON VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA. ROAD SALT USED DURING THE WINTER MONTHS IN THESE JURISDICTIONS MAY RESULT IN INTERNAL CORROSION AND THINNING OF THE STEEL IN THE FRONT LOWER CONTROL ARMS. THE CORROSION MAY PROGRESS TO THE POINT WHERE THE LOWER CONTROL ARM'S UPPER AND LOWER PANELS BECOME PERFORATED. A PERFORATED FRONT LOWER CONTROL ARM MAY FRACTURE BETWEEN ITS BALL JOINT ATTACHMENT AND THE FORWARD AND REARWARD PIVOT ATTACHMENTS TO THE CHASSIS.
Manufacturer’s stated response
DEALERS WILL INSPECT THE FRONT LOWER CONTROL ARMS FOR CORROSION DAMAGE. IF SPECIFIED LEVELS OF INTERNAL CORROSION DAMAGE ARE FOUND, THE FRONT LOWER CONTROL ARMS WILL BE REPLACED WITH NEW FRONT LOWER CONTROL ARMS INCORPORATING ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS. IF THE FRONT LOWER CONTROL ARMS DO NOT REQUIRE REPLACEMENT, THE DEALER WILL ADD DRAINAGE HOLES TO THE FRONT LOWER CONTROL ARMS AND WILL TREAT THE FRONT LOWER CONTROL ARMS WITH RUST-PROOFING MATERIALS TO ARREST THE INTERNAL CORROSION PROCESS. THESE PROCEDURES WILL BE PERFORMED FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 17, 2009. OWNERS MAY CONTACT THE HYUNDAI CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.
Manufacturer campaign: 091
Read campaign 09V125000 at NHTSAFUEL SYSTEM, GASOLINE:STORAGECampaign 04V369000
Reported concern
CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 301, "FUEL SYSTEM INTEGRITY" A VALVE ON THE FUEL TANK ASSEMBLY MAY NOT CLOSE PROPERLY. IF A VEHICLE ROLLS OVER AND THE FUEL TANK ASSEMBLY VALVE IS NOT PROPERLY CLOSED, FUEL SPILLAGE MAY OCCUR.
Manufacturer’s stated response
DEALERS WILL INSTALL AN ADDITIONAL FUEL TANK ASSEMBLY VALVE. THE RECALL BEGAN ON OCTOBER 5, 2004. OWNERS SHOULD CONTACT HYUNDAI DE PUERTO RICO AT 1-800-981-0188.
Manufacturer campaign: 066
Read campaign 04V369000 at NHTSAFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLYCampaign 04V178000
Reported concern
SOME PASSENGER VEHICLES CONTAIN A FUEL TANK ASSEMBLY VALVE THAT MAY NOT CLOSE PROPERLY. IF A VEHICLE WITH A FUEL TANK ASSEMBLY VALVE THAT IS NOT PROPERLY CLOSED WERE TO ROLL OVER, FUEL SPILLAGE MAY OCCUR.
Manufacturer’s stated response
DEALERS WILL INSTALL AN ADDITIONAL FUEL TANK ASSEMBLY VALVE. OWNER NOTIFICATION BEGAN ON JUNE 30, 2004. OWNERS SHOULD CONTACT HYUNDAI AT 1-800-633-5151.
Manufacturer campaign: 066
Read campaign 04V178000 at NHTSASERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGSCampaign 03V496000
Reported concern
ON CERTAIN PASSENGER VEHICLES, THE BRAKE TUBES FOR THE REAR BRAKES CAN CONTACT THE STEERING GEARBOX MOUNTING BRACKETS.
Manufacturer’s stated response
DEALERS WILL REPOSITION THE REAR BRAKE TUBES, INSTALL BRAKE TUBE CLIPS, AND APPLY ANTI-CORROSION MATERIAL TO THE REAR BRAKE TUBES. OWNER NOTIFICATION BEGAN JANUARY 22, 2004. OWNERS SHOULD CONTACT HYUNDAI OF PUERTO RICO AT 1-800-633-5151.
Manufacturer campaign: 061
Read campaign 03V496000 at NHTSAAIR BAGS:FRONTALCampaign 03V321000
Reported concern
ON CERTAIN SPORT UTILITY VEHICLES, THE FRONT PASSENGER AIR BAG IS MOUNTED BENEATH THE RIGHT PORTION OF THE INSTRUMENT PANEL'S PADDED SURFACE. TEAR LINES ARE FORMED INTO THE UNDERSIDE OF THE INSTRUMENT PANEL'S PADDED SURFACE DURING THE PRODUCTION PROCESS OF THE INSTRUMENT PANEL TOP PAD. THESE TEAR LINES ALLOW A PORTION OF THE INSTRUMENT PANEL SURFACE TO FOLD UPWARD IF THE PASSENGER AIR BAG DEPLOYS.
Manufacturer’s stated response
HYUNDAI WILL REPLACE THE INSTRUMENT PANEL. OWNER NOTIFICATION BEGAN ON OCTOBER 13, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI OF AMERICA AT 1-800-633-5151, OR IF THE VEHICLE IS LOCATED IN PUERTO RICO, HYUNDAI OF PUERTO RICO AT 1-800-981-0188.
Manufacturer campaign: 063
Read campaign 03V321000 at NHTSASEAT BELTS:FRONT:BUCKLE ASSEMBLYCampaign 03V290000
Reported concern
ON CERTAIN SPORT UTILITY VEHICLES, THE DRIVER SEAT BELT BUCKLE WIRING COULD BE DAMAGED BY INTERFERENCE WITH THE DRIVER SEAT CUSHION HEIGHT ADJUSTER MECHANISM. DAMAGED DRIVER SEAT BELT BUCKLE WIRING COULD CAUSE THE SEAT BELT WARNING LAMP OR THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG WIRING LAMP TO ILLUMINATE. IT COULD ALSO CAUSE THE AIR BAG FUSE (CAVITY NUMBER 5) TO OPEN, PREVENTING AIR BAG DEPLOYMENT. DAMAGED DRIVER SEAT BELT BUCKLE WIRING COULD CAUSE THE SEAT BELT WARNING LAMP OR THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG WIRING LAMP TO ILLUMINATE. IT COULD ALSO CAUSE THE AIR BAG FUSE (CAVITY NUMBER 5) TO OPEN, PREVENTING AIR BAG DEPLOYMENT.
Manufacturer’s stated response
DEALERS WILL INSTALL A NEW DRIVER SEAT BELT BUCKLE, IF NECESSARY, AND WILL PLACE A PROTECTIVE COVER OVER THE DRIVER SEAT BELT BUCKLE WIRING TO PREVENT DAMAGE FROM OCCURRING. OWNER NOTIFICATION BEGAN SEPTEMBER 23, 2003. OWNERS SHOULD CONTACT HYUNDAI OF PUERTO RICO AT 1-899-981-0188.
Read campaign 03V290000 at NHTSASERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGSCampaign 03V257000
Reported concern
ON CERTAIN PASSENGER VEHICLES, THE REAR BRAKE TUBES PASS BEHIND THE FRONT SUSPENSION CROSSMEMBER. TWO STEERING GEARBOX MOUNTING BRACKETS ARE WELDED TO THE CROSSMEMBER. ON VEHICLES EQUIPPED WITH AN ANTILOCK BRAKE SYSTEM (ABS), THE REAR BRAKE TUBES COULD CONTACT BOTH STEERING GEARBOX MOUNTING BRACKETS. ON VEHICLES THAT ARE NOT EQUIPPED WITH ABS, THE REAR BRAKE TUBES MAY CONTACT ONLY THE LEFT MOUNTING BRACKET. CONTACT BETWEEN THE REAR BRAKE TUBES AND THE STEERING BRACKETS COULD CAUSE WEAR AND CORROSION THAT COULD RESULT IN BRAKE FLUID LEAKAGE.
Manufacturer’s stated response
DEALERS WILL REPOSITION THE REAR BRAKE TUBES SO THEY DO NOT CONTACT THE MOUNTING BRACKETS, INSTALL BRAKE TUBE CLIPS TO CONTROL THE LOCATION OF THE REAR BRAKE TUBES, AND APPLY ANTI-CORROSION MATERIAL TO THE TUBES IN THE AREAS WHERE CONTACT WITH THE MOUNTING BRACKETS MAY HAVE OCCURRED. OWNER NOTIFICATION BEGAN ON OCTOBER 13, 2003. OWNERS SHOULD CONTACT HYUNDAI AT 1-800-633-5151.
Manufacturer campaign: 061
Read campaign 03V257000 at NHTSASEAT BELTS:FRONT:BUCKLE ASSEMBLYCampaign 02V290000
Reported concern
ON CERTAIN PASSENGER VEHICLES, THE DRIVER SEAT BELT BUCKLE WIRING COULD BE DAMAGED BY INTERFERENCE WITH THE DRIVER SEAT CUSHION HEIGHT ADJUSTER MECHANISM.
Manufacturer’s stated response
DEALERS WILL INSTALL A NEW DRIVER SEAT BELT BUCKLE, IF NECESSARY, AND WILL PLACE A PROTECTIVE COVER OVER THE DRIVER SEAT BELT BUCKLE WIRING TO PREVENT DAMAGE FROM OCCURRING. OWNER NOTIFICATION BEGAN ON MARCH 24, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI AT 1-800-633-5151.
Manufacturer campaign: 056
Read campaign 02V290000 at NHTSAUNKNOWN OR OTHERCampaign 02V044000
Reported concern
ON CERTAIN PASSENGER VEHICLES, THE LEFT LOWER INSTRUMENT PANEL BRACKET WAS NOT INSTALLED.
Manufacturer’s stated response
DEALERS WILL INSPECT THE VEHICLES TO DETERMINE IF THE BRACKET HAS BEEN INSTALLED. IF THE BRACKET HAS NOT BEEN INSTALLED, THE DEALER WILL INSTALL THE LEFT LOWER INSTRUMENT PANEL BRACKET. OWNER NOTIFICATION BEGAN MARCH 4, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI AT 1-800-633-5151.
Read campaign 02V044000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
110 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
DTN DLThe National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN…NHTSA ID 11032523
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 11032523 at NHTSADTN DCSThe National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co.…NHTSA ID 11032522
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 11032522 at NHTSA25-BD-012H TSBThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensat…NHTSA ID 11025476
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Components: EXTERIOR LIGHTING. Confirm detailed applicability in the original document.
Source record 11025476 at NHTSA24-BD-001HThis bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail sp…NHTSA ID 10251285
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
Components: VISIBILITY · VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 10251285 at NHTSA23-EM-005HThis bulletin provides important checkpoint guidelines when performing engine oil and filter change services.NHTSA ID 10247189
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10247189 at NHTSA23-BD-007HHyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the pa…NHTSA ID 10235566
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 10235566 at NHTSA23-BD-002HThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensat…NHTSA ID 10230904
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Components: VISIBILITY. Confirm detailed applicability in the original document.
Source record 10230904 at NHTSA22-EM-010HFollow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.NHTSA ID 10217251
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10217251 at NHTSA22-GI-006HEffective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before re…NHTSA ID 10217258
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
Components: TIRES. Confirm detailed applicability in the original document.
Source record 10217258 at NHTSA21-AT-006HHyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicleâÂÂs ownerâÂÂs manual. ï· Use of other ATF may result in improper shift quality or other drivability conditions. ï· Use of other…NHTSA ID 10196546
Hyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicleâÂÂs ownerâÂÂs manual. ï· Use of other ATF may result in improper shift quality or other drivability conditions. ï· Use of other DCT and IVT gear oil may result in reduced durability. Hyundai does not approve the use of any aftermarket ATF or gear oil additives.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10196546 at NHTSA21-EM-004HThis bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next r…NHTSA ID 10190044
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Components: ENGINE AND ENGINE COOLING · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10190044 at NHTSA21-BR-002HThis bulletin provides best practice recommendations when performing brake service procedures.NHTSA ID 10190038
This bulletin provides best practice recommendations when performing brake service procedures.
Components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 10190038 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.