The vehicle dossier US · 2000
2000 Hyundai
TIBURONProblems & recalls
58 distinct owner reports in the NHTSA snapshot. Other components appears in 34 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 58 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
69,018 miles is the median among 16 reports with usable mileage. The middle half spans 37,500–90,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
1 recall campaign on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
SEAT BELTS:FRONT:WEBBINGCampaign 01V345000
Reported concern
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE DRIVER AND FRONT PASSENGER SEAT BELTS MAY NOT EXTEND AND RETRACT SMOOTHLY THROUGH THE D-RING GUIDES MOUNTED ON THE BODY PILLARS AFT OF THE DOORS. IF THE SEAT BELTS DO NOT EXTEND AND RETRACT SMOOTHLY, THEY MAY TWIST IN THE D-RING GUIDES AND MAKE IT INCONVENIENT TO EXTEND AND RETRACT THE SEAT BELTS.
Manufacturer’s stated response
DEALERS WILL INSTALL A STOPPER OVER EACH FRONT SEAT BELT D-RING GUIDE TO ASSIST THE SEAT BELT TO SMOOTHLY EXTEND AND RETRACT. OWNER NOTIFICATION BEGAN DECEMBER 10, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI AT 1-800-633-5151.
Read campaign 01V345000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
46 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
24-BD-001HThis bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail sp…NHTSA ID 10251285
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
Components: VISIBILITY · VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 10251285 at NHTSA23-EM-005HThis bulletin provides important checkpoint guidelines when performing engine oil and filter change services.NHTSA ID 10247189
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10247189 at NHTSA23-BD-007HHyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the pa…NHTSA ID 10235566
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 10235566 at NHTSA23-BD-002HThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensat…NHTSA ID 10230904
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Components: VISIBILITY. Confirm detailed applicability in the original document.
Source record 10230904 at NHTSA22-EM-010HFollow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.NHTSA ID 10217251
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10217251 at NHTSA22-GI-006HEffective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before re…NHTSA ID 10217258
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
Components: TIRES. Confirm detailed applicability in the original document.
Source record 10217258 at NHTSA21-AT-006HHyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicleâÂÂs ownerâÂÂs manual. ï· Use of other ATF may result in improper shift quality or other drivability conditions. ï· Use of other…NHTSA ID 10196546
Hyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicleâÂÂs ownerâÂÂs manual. ï· Use of other ATF may result in improper shift quality or other drivability conditions. ï· Use of other DCT and IVT gear oil may result in reduced durability. Hyundai does not approve the use of any aftermarket ATF or gear oil additives.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10196546 at NHTSA21-EM-004HThis bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next r…NHTSA ID 10190044
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Components: ENGINE AND ENGINE COOLING · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10190044 at NHTSA21-BR-002HThis bulletin provides best practice recommendations when performing brake service procedures.NHTSA ID 10190038
This bulletin provides best practice recommendations when performing brake service procedures.
Components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 10190038 at NHTSA21-EM-003HThis bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.NHTSA ID 10189989
This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
Components: ENGINE AND ENGINE COOLING · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10189989 at NHTSA20-BR-002HThis bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.NHTSA ID 10183963
This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
Components: SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 10183963 at NHTSA20-SS-004HThis bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the âTire Balance Data Sheetâ must be fully completed including imbalance…NHTSA ID 10183960
This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the âTire Balance Data Sheetâ must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
Components: TIRES · WHEELS. Confirm detailed applicability in the original document.
Source record 10183960 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.