Original record summaries, dates and identifiers for this model-year. Records 1–48 of 48, ordered newest first. Dated records on this page: Jan 26, 2021–Apr 10, 2026.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Apr 10, 2026Other
DTN DL
NHTSA communication ID: 11032523
NHTSA source summary · Original PDF not reviewed by Recallfolio
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Elantra (CN7, CN7A), Kona (OS, SX2), and Sonata Hybrid (DN8 HEV) vehicles equipped with 2.0L engines may illuminate a warning lamp for DTC P218100 (Cooling System Performance) related to the Integrated Thermal-Management Module (ITM). Follow the service procedure in this bulletin to install a spring onto the thermostat within the ITM, in order to prevent premature opening, and perform an ECU software update on affected vehicles.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information related to the changes introduced in the 2025 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain Elantra Hybrid (CN7 HEV), Sonata Hybrid (DN8 HEV), and Tucson Hybrid (NX4 HEV) vehicles may exhibit a warning light due to DTC Code P1BB20 (12V Lithium Battery Cell Voltage High). The California Air Resources Board has determined that these vehicles may be releasing air pollutants which exceed Federal and California standards.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides the procedure to update the software for the Battery Management System (BMS) on certain Elantra Hybrid (CN7 HEV), Sonata Hybrid (DN8 HEV), and Tucson Hybrid (NX4 HEV) vehicles that may exhibit a warning light with DTC P1BB200 and enter Limp Mode.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information related to the changes introduced in the 2024 2nd Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issues with remote commands, or other Bluelink services, please see the instructions below to reestablish the connection via the AVN pinhole reset method.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain Elantra hybrid (CN7 HEV), Sonata hybrid (DN8 HEV), and Tucson hybrid (NX4 HEV) vehicles may exhibit a warning light due to DTC Code P1BB20 (12V Lithium Battery Cell Voltage High). Follow the procedure in TSB 25-01-010H (or latest version) to perform the update the Battery management System (BMS) software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides the procedure to update the software for the Battery Management System (BMS) on certain Elantra Hybrid (CN7 HEV), Sonata Hybrid (DN8 HEV), and Tucson Hybrid (NX4 HEV) vehicles that may exhibit a warning light with DTC P1BB20.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides the procedure for updating the automatic transmission TCU (Transmission Control Unit) software to improve shift quality, judder and hesitation when accelerating.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles equipped with the AVN 5th Gen Wide system may exhibit a condition where the radio app crashes frequently when entering radio mode and/or displays a message that reads “Uneven Road Ahead, Drive carefully” on the cluster along with a warning sound. Follow the procedure outlined in this bulletin to update the AVN software to resolve this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain Elantra hybrid (CN7 HEV), Sonata hybrid (DN8 HEV), and Tucson hybrid (NX4 HEV) vehicles may exhibit a warning light due to DTC Code P1BB20 (12V Lithium Battery Cell Voltage High). Follow the procedure in TSB 24-01-054H (or latest version) to perform the update the Battery management System (BMS) software.
Campaign / software reference: Service Campaign 9B4
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides the procedure to update the software for the Battery Management System (BMS) on certain Elantra Hybrid (CN7 HEV), Sonata Hybrid (DN8 HEV), and Tucson Hybrid (NX4 HEV) vehicles that may exhibit a warning light with DTC P1BB20.
Campaign / software reference: SERVICE CAMPAIGN 910G
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles equipped with the AVN 5th Gen Wide system may exhibit a condition where the radio app crashes frequently when entering radio mode and/or displays a message that reads âUneven Road Ahead, Drive carefullyâ on the cluster along with a warning sound. Follow the procedure outlined in this bulletin to update the AVN software to resolve this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides the procedure to update the Hybrid Control Unit (HCU) and Dual Automatic Temperature Control (DATC) software to help improve coolant flow to the Exhaust Heat Recovery System (EHRS).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2020-2023MY Sonata Hybrid (DN8 HEV) vehicles may exhibit coolant leakage, engine overheating, and white smoke from the exhaust due to an internal leak at the Exhaust Heat Recovery System (EHRS) portion of the center muffler assembly. Follow the procedure outlined in this bulletin to repair this condition after confirming EHRS is leaking internally.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides the procedure to update the Hybrid Control Unit (HCU) and Dual Automatic Temperature Control (DATC) software to help improve coolant flow to the Exhaust Heat Recovery System (EHRS).
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information related to the Engine Control Module (ECM) software update and coolant replacement for 2020-2023MY Sonata Hybrid (DN8 HEV) vehicles to improve the coolant filling mode by discharging air bubbles.
Source components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM) · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This TSB provides information to diagnose the push button shifter operation. If you are servicing a vehicle with any symptoms listed below or DTCs (listed on Page 2) , follow the Service Procedure on Page 3. SYMPTOMS: ⢠âShifter System Malfunctionâ displayed in the cluster ⢠Wonât shift into or out of gear or wonât shift out of Park ⢠Incorrect gear display in cluster and/or wonât start
Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundaiâs Navigation Updates page. The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip logic has been added to resolve the data congestion with Google Maps.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed below, follow the Service Procedure and replace the valve body internal harness and the input/output speed sensor.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed below, follow the Service Procedure and replace the related solenoid and harness.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed below, follow the Service Procedure and replace the harness with an integrated oil temperature sensor.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This TSB provides a procedure to diagnose the push button shifter operation. If you are servicing a vehicle with any symptoms or DTC listed below, follow the Service Procedure, Page 2.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an 8-speed front-wheel-drive vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ï· DIAGNOSTIC TROUBLE CODES: ï P070500 - Transmission range sensor circuit malfunction ï P070512 - Transmission range sensor circuit malfunction ï P070514 - Transmission range sensor circuit malfunction ï P07051C - Transmission range sensor circuit malfunction ï P070600 - Transmission range sensor circuit range/performance ï P070661 - Transmission range sensor circuit range/performance ï P070696 - Transmission range sensor circuit range/performance ï· SYMPTOMS: ï Malfunction Indicator Light (MIL) illuminated ï 5th gear fail-safe ï No gear indication in cluster ï Intermittently wonât shift into D or R ï Intermittently wonât shift out of Park ï Intermittent ly no engine cr ank/no start in âPâ or âNâ with or without MIL or DTC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to update the Shift Control Unit (SCU) for Shift-by-Wire vehicles (SBW). The update improves the display in the cluster.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When using Wireless CarPlay, the system may intermittently auto disconnect. When Wireless CarPlay is disconnected, a pop up message âPhone Not Responding. Please reconnect it and try againâ will appear on the radio screen. This bulletin describes the procedure to update the radio software to help reduce the disconnection occurrences.