The manufacturer’s record · Page 1 of 1

2008 Hyundai AZERA
Manufacturer communications & TSBs.Page 1

Original record summaries, dates and identifiers for this model-year. Records 1–42 of 42, ordered newest first. Dated records on this page: May 1, 2008–Apr 10, 2026.

Back to 2008 Hyundai AZERA problems & recalls
Read the applicability before drawing a conclusion.

This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.

NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.

Apr 10, 2026Other

DTN DL

NHTSA communication ID: 11032523

NHTSA source summary · Original PDF not reviewed by Recallfolio

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

Source components: AIR BAGS.

Source record 11032523 at NHTSA
Apr 10, 2026Other

DTN DCS

NHTSA communication ID: 11032522

NHTSA source summary · Original PDF not reviewed by Recallfolio

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

Source components: AIR BAGS.

Source record 11032522 at NHTSA
Nov 6, 2025Service Bulletin/Repair Instructions

25-BD-012H TSB

NHTSA communication ID: 11025476

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

Source components: EXTERIOR LIGHTING.

Source record 11025476 at NHTSA
Apr 9, 2024Service Bulletin/Repair Instructions

24-AT-002H

NHTSA communication ID: 10253275

NHTSA source summary · Original PDF not reviewed by Recallfolio

This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2.

Source components: POWER TRAIN.

Source record 10253275 at NHTSA
Feb 14, 2024Service Bulletin/Repair Instructions

24-BD-001H

NHTSA communication ID: 10251285

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

Source components: VISIBILITY · VISIBILITY/WIPER.

Source record 10251285 at NHTSA
Oct 13, 2023Service Bulletin/Repair Instructions

23-EM-005H

NHTSA communication ID: 10247189

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.

Source components: ENGINE AND ENGINE COOLING.

Source record 10247189 at NHTSA
Apr 24, 2023Service Bulletin/Repair Instructions

23-BD-007H

NHTSA communication ID: 10235566

NHTSA source summary · Original PDF not reviewed by Recallfolio

Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.

Source components: STRUCTURE:BODY.

Source record 10235566 at NHTSA
Jan 30, 2023Service Bulletin/Repair Instructions

23-BD-002H

NHTSA communication ID: 10230904

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

Source components: VISIBILITY.

Source record 10230904 at NHTSA
Jul 28, 2022Service Bulletin/Repair Instructions

22-EM-010H

NHTSA communication ID: 10217251

NHTSA source summary · Original PDF not reviewed by Recallfolio

Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.

Source components: ENGINE AND ENGINE COOLING.

Source record 10217251 at NHTSA
Jul 14, 2022Service Bulletin/Repair Instructions

22-GI-006H

NHTSA communication ID: 10217258

NHTSA source summary · Original PDF not reviewed by Recallfolio

Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.

Source components: TIRES.

Source record 10217258 at NHTSA
May 21, 2021Service Bulletin/Repair Instructions

21-AT-006H

NHTSA communication ID: 10196546

NHTSA source summary · Original PDF not reviewed by Recallfolio

Hyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicle’s owner’s manual.  Use of other ATF may result in improper shift quality or other drivability conditions.  Use of other DCT and IVT gear oil may result in reduced durability. Hyundai does not approve the use of any aftermarket ATF or gear oil additives.

Source components: POWER TRAIN.

Source record 10196546 at NHTSA
Mar 30, 2021Service Bulletin/Repair Instructions

21-EM-004H

NHTSA communication ID: 10190044

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.

Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.

Source record 10190044 at NHTSA
Mar 23, 2021Service Bulletin/Repair Instructions

21-BR-002H

NHTSA communication ID: 10190038

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides best practice recommendations when performing brake service procedures.

Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SERVICE BRAKES.

Source record 10190038 at NHTSA
Mar 10, 2021Service Bulletin/Repair Instructions

21-EM-003H

NHTSA communication ID: 10189989

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.

Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.

Source record 10189989 at NHTSA
Nov 30, 2020Service Bulletin/Repair Instructions

20-BR-002H

NHTSA communication ID: 10183963

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.

Source components: SERVICE BRAKES.

Source record 10183963 at NHTSA
Nov 19, 2020Service Bulletin/Repair Instructions

20-SS-004H

NHTSA communication ID: 10183960

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the “Tire Balance Data Sheet” must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.

Source components: TIRES · WHEELS.

Source record 10183960 at NHTSA
Jul 14, 2020Service Bulletin/Repair Instructions

20-BD-014H

NHTSA communication ID: 10178175

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.

Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · EXTERIOR LIGHTING.

Source record 10178175 at NHTSA
May 6, 2020Service Bulletin/Repair Instructions

20-SS-002H(1)

NHTSA communication ID: 10176182

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.

Source components: TIRES · WHEELS.

Source record 10176182 at NHTSA
May 1, 2020Service Bulletin/Repair Instructions

20-BD-007H-1

NHTSA communication ID: 10176178

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.

Source components: EQUIPMENT.

Source record 10176178 at NHTSA
Apr 23, 2020Service Bulletin/Repair Instructions

20-EE-003H

NHTSA communication ID: 10174808

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides information on identifying dealer stock vehicles with either: • A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. • A 30 Day alert - vehicle has not started and reported an SOC in 30 days.

Source components: ELECTRICAL SYSTEM · EQUIPMENT.

Source record 10174808 at NHTSA
Apr 17, 2020Service Bulletin/Repair Instructions

20-AT-016H

NHTSA communication ID: 10174807

NHTSA source summary · Original PDF not reviewed by Recallfolio

The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:

Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN.

Source record 10174807 at NHTSA
Mar 23, 2020Service Bulletin/Repair Instructions

20-BD-007H

NHTSA communication ID: 10173546

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10173546 at NHTSA
Feb 5, 2020Service Bulletin/Repair Instructions

20-SS-001H

NHTSA communication ID: 10172142

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.

Source components: SUSPENSION.

Source record 10172142 at NHTSA
Jan 16, 2020Service Bulletin/Repair Instructions

20-BE-001H

NHTSA communication ID: 10170883

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.

Source components: ELECTRICAL SYSTEM.

Source record 10170883 at NHTSA
Nov 4, 2019Service Bulletin/Repair Instructions

19-BE-011H-1

NHTSA communication ID: 10169370

NHTSA source summary · Original PDF not reviewed by Recallfolio

The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.

Source components: BACK OVER PREVENTION · LANE DEPARTURE.

Source record 10169370 at NHTSA
Oct 14, 2019Service Bulletin/Repair Instructions

19-GI-006H

NHTSA communication ID: 10167253

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10167253 at NHTSA
Apr 15, 2019Service Bulletin/Repair Instructions

19-FL-003H

NHTSA communication ID: 10160098

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.

Source components: ELECTRICAL SYSTEM · POWER TRAIN.

Source record 10160098 at NHTSA
Nov 29, 2016Service Bulletin/Repair Instructions

5NP-Y6E5L-12

NHTSA communication ID: 10119110

NHTSA source summary · Original PDF not reviewed by Recallfolio

The power-adjustable driver seat in the affected vehicles may intermittently not operate or move forward, rearward, up, down, or recline without driver input. Unintentional movement of the driver?s seat may affect the driver?s ability to control the vehicle, increasing the risk of a crash. This bulletin describes the procedure to replace the driver power seat switch to correct this condition.

Source components: SEATS:FRONT ASSEMBLY:POWER ADJUST.

Source record 10119110 at NHTSA
Nov 29, 2016Service Bulletin/Repair Instructions

5NP-H8X4Y-12

NHTSA communication ID: 10119079

NHTSA source summary · Original PDF not reviewed by Recallfolio

As previously announced, Hyundai launched a safety recall related to the driver?s power seat switch on certain Model Year 2007 and 2008 Azera vehicles produced beginning on March 07, 2007 through August 14, 2007.

Source components: SEATS:FRONT ASSEMBLY:POWER ADJUST.

Source record 10119079 at NHTSA
Sep 23, 2016Service Bulletin/Repair Instructions

5NP-Y9D6A-10

NHTSA communication ID: 10082762

NHTSA source summary · Original PDF not reviewed by Recallfolio

"EFFECTIVE FRIDAY, SEPTEMBER 23, 2016, 2016 HYUNDAI MOTOR AMERICA WILL BE IDENTIFYING VINS WITH OPEN RECALL CAMPAIGN 150 ON WEBDCS."

Source components: SEATS · SEATS:FRONT ASSEMBLY:POWER ADJUST.

Source record 10082762 at NHTSA
Aug 9, 2016Service Bulletin/Repair Instructions

5NP-B6E2P-10

NHTSA communication ID: 10082455

NHTSA source summary · Original PDF not reviewed by Recallfolio

"THE PCM OR TCM CONTAINS LOGIC TO ADJUST SOLENOID DUTY AND LINE PRESSURE AS NEEDED TO COMPENSATE FOR NORMAL CLUTCH WEAR OVER THE LIFE OF THE TRANSAXLE. THIS BULLETIN PROVIDES THE PROCEDURES NECESSARY TO RESET (ERASE) AND RELEARN THE PCM/TCM ADAPTIVE VALUES. AFTER THE FOLLOWING REPAIRS HAVE BEEN COMPLETED, THE PCM/TCM ADAPTIVE VALUES MUST BE RESET IN ORDER TO PROVIDE OPTIMUM SHIFT QUALITY. IF THE PROCEDURE IS NOT PERFORMED, THE TRANSMISSION MAY EXPERIENCE A SHIFT FLARE OR HARSH SHIFT. „H REPLACE AUTOMATIC TRANSAXLE OR PCM/TCM „H REPROGRAM OR EXCHANGE A PCM/TCM FROM ANOTHER VEHICLE"

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:AXLE ASSEMBLY.

Source record 10082455 at NHTSA
Oct 1, 2012Service Bulletin/Repair Instructions

12-AT-023

NHTSA communication ID: 10059631

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: EQUIPMENT.

Source record 10059631 at NHTSA
Dec 1, 2010Service Bulletin/Repair Instructions

SB-10-EM-006

NHTSA communication ID: 10038212

NHTSA source summary · Original PDF not reviewed by Recallfolio

HYUNDAI: A REVISED PROCEDURE FOR REPLACING THE TIMING CHAIN TENSIONERS. *RM

Source components: ENGINE AND ENGINE COOLING:ENGINE.

Source record 10038212 at NHTSA
Aug 1, 2010Service Bulletin/Repair Instructions

TSB-10-FL-010

NHTSA communication ID: 10034649

NHTSA source summary · Original PDF not reviewed by Recallfolio

HYUNDAI: DTC P2135/P0638 OR COLD ENGINE RPM FLUCTUATION; TPS REPLACEMENT AND ECM UPDATE. SOME 2.7L, 3.3L OR 3.8L ENGINES IN MODELS IDENTIFIED IN THE APPLICABILITY LIST MAY EXPERIENCE ONE OR MORE OF THE CONDITIONS LISTED. *PE

Source components: ENGINE AND ENGINE COOLING:ENGINE.

Source record 10034649 at NHTSA
Apr 1, 2010Service Bulletin/Repair Instructions

TSB-10-GI-001

NHTSA communication ID: 10034204

NHTSA source summary · Original PDF not reviewed by Recallfolio

HYUNDAI: LABEL REQUIREMENTS FOR VEHICLE LOADING TO COMPLY WITH FMVSS 110. EFFECTIVE 6/2/08, FMVSS 110 (FMVSS 110) SETS A THRESHOLD FOR CORRECTING LOAD CAPACITY INFORMATION INDICATED ON TIRE PLACARDS WHEN VEHICLE WEIGHT HAS BEEN INCREASED BEFORE RETAIL SALE. ALL MODELS INCLUDED AFTER 6/2/08. *PE

Source components: EQUIPMENT:OTHER:LABELS.

Source record 10034204 at NHTSA
Jan 1, 2010Service Bulletin/Repair Instructions

TSB-10-01-006

NHTSA communication ID: 10033648

NHTSA source summary · Original PDF not reviewed by Recallfolio

HYUNDAI: SOME VEHICLES ARE EQUIPPED WITH AN IN CAR NAVIGATION SYSTEM AS PART OF THE AUDIO SYSTEM. IF A NAVIGATION SYSTEM EXPERIENCES LOCK UP DURING OPERATION, THIS BULLETIN DESCRIBES THE REPAIR PROCEDURE NECESSARY TO REPROGRAM THE NAVIGATION SOFTWARE. *PE

Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).

Source record 10033648 at NHTSA
Oct 1, 2009Service Bulletin/Repair Instructions

TSB09-FL-003-2

NHTSA communication ID: 10032793

NHTSA source summary · Original PDF not reviewed by Recallfolio

HYUNDAI: SOME VEHICLES MAY EXPERIENCE A MALFUNCTION INDICATOR LAMP ILLUMINATED WITH THE ETC (ELECTRONIC THROTTLE CONTROL) SYSTEM RELATED DTC P2135 ( FORCED LIMITED POWER) OR DTC P0638 (POWER MANAGEMENT). *PE

Source components: ENGINE AND ENGINE COOLING:ENGINE · EQUIPMENT:ELECTRICAL.

Source record 10032793 at NHTSA
Jul 1, 2009Service Bulletin/Repair Instructions

TSB-09-AT-013

NHTSA communication ID: 10030984

NHTSA source summary · Original PDF not reviewed by Recallfolio

HYUNDAI: AUTOMATIC TRANSAXLE RANGE SWITCH DIAGNOSTIC TROUBLE CODES P0705 (RANGE SWITCH SIGNAL PROBLEMS), P0707 (RANGE SWITCH OPEN CIRCUIT), AND P0708 (RANGE SWITCH SHORT CIRCUIT OR MULTIPLE INPUTS). AN IMPROPERLY ADJUSTED OR IMPROPERLY OPERATING RANGE SWITCH MAY RESULT IN THE ABOVE MENTIONED CONDITIONS. MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATED; IMPOSSIBLE ENGINE START IN P OR N. *PE

Source components: ENGINE AND ENGINE COOLING:ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10030984 at NHTSA
Jun 1, 2009Service Bulletin/Repair Instructions

SB-09-01-017

NHTSA communication ID: 10030878

NHTSA source summary · Original PDF not reviewed by Recallfolio

HYUNDAI: SOME VEHICLES ARE EQUIPPED WITH AN IN CAR NAVIGATION SYSTEM AS PART OF THE AUDIO SYSTEM. IF A NAVIGATION SYSTEM EXPERIENCES LOCK UP DURING OPERATION, THIS BULLETIN DESCRIBES THE REPAIR PROCEDURE NECESSARY TO REPROGRAM THE NAVIGATION SOFTWARE. *PE

Source components: ELECTRICAL SYSTEM:SOFTWARE.

Source record 10030878 at NHTSA
Apr 1, 2009Service Bulletin/Repair Instructions

TSB-09-FL-003-1

NHTSA communication ID: 10029229

NHTSA source summary · Original PDF not reviewed by Recallfolio

HYUNDAI: MIL ON DTC P2135 OR P0638 OR COLD ENGINE RPM FLUCTUATION- TPS REPLACEMENT & ECM UPDATE. SOME VEHICLES MAY EXPERIENCE EITHER SLIGHT ENGINE RPM FLUCTUATION AT COLD WARM UP OR MALFUNCTION INDICATOR LAMP ILLUMINATED WITH THE ETC (ELECTRONIC THROTTLE CONTROL) SYSTEM. *PE

Source components: ENGINE AND ENGINE COOLING:ENGINE · FUEL SYSTEM, GASOLINE.

Source record 10029229 at NHTSA
Feb 1, 2009Service Bulletin/Repair Instructions

TSB-09-FL-003

NHTSA communication ID: 10028825

NHTSA source summary · Original PDF not reviewed by Recallfolio

HYUNDAI: SOME VEHICLES MAY EXPERIENCE A MALFUNCTION INDICATOR LAMP ILLUMINATED WITH THE ETC (ELECTRONIC THROTTLE CONTROL) SYSTEM RELATED DTC P2135 OR DTC P0638. *PE

Source components: ENGINE AND ENGINE COOLING:ENGINE.

Source record 10028825 at NHTSA
May 1, 2008Service Bulletin/Repair Instructions

08-GI-001

NHTSA communication ID: 10025141

NHTSA source summary · Original PDF not reviewed by Recallfolio

ALL VEHICLES RETAILED BEGINNING ON JUE 2, 2008 THAT MEET THE ADDITIONAL WEIGHT CRITERIA ABOVE. LABEL REQUIREMENTS FOR VEHICLE LOADING TO COMPLY WITH FMVSS 110. *PE

Source components: EQUIPMENT:OTHER:LABELS.

Source record 10025141 at NHTSA