The manufacturer’s record · Page 10 of 14

2010 GMC YUKON DENALI
Manufacturer communications & TSBs.Page 10

Original record summaries, dates and identifiers for this model-year. Records 901–1,000 of 1,375, ordered newest first. Dated records on this page: Feb 21, 2014–Aug 7, 2014.

Back to 2010 GMC YUKON DENALI problems & recalls
Read the applicability before drawing a conclusion.

This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.

NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.

Aug 7, 2014Service Bulletin/Repair Instructions

PIT4543B

NHTSA communication ID: 10112151

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about the operation of the ground illumination lamp. For the puddle lamps to operate they must be turned on using the Drivers Information Center buttons and it must be dark outside.

Source components: EXTERIOR LIGHTING · EXTERIOR LIGHTING:HEADLIGHTS.

Source record 10112151 at NHTSA
Aug 6, 2014Service Bulletin/Repair Instructions

13-02-32-001C

NHTSA communication ID: 10138670

NHTSA source summary · Original PDF not reviewed by Recallfolio

This technical bulletin provides a procedure to repair any power steering leak that may be caused from extremely low temperatures and use the recommended fluid.

Source components: STEERING · STEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID.

Source record 10138670 at NHTSA
Jul 31, 2014Service Bulletin/Repair Instructions

PIC5959B

NHTSA communication ID: 10112144

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicle that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.

Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10112144 at NHTSA
Jul 30, 2014Service Bulletin/Repair Instructions

99-01-39-004F

NHTSA communication ID: 10140439

NHTSA source summary · Original PDF not reviewed by Recallfolio

This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.

Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.

Source record 10140439 at NHTSA
Jul 30, 2014Service Bulletin/Repair Instructions

99-01-39-004F

NHTSA communication ID: 10138594

NHTSA source summary · Original PDF not reviewed by Recallfolio

This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.

Source components: EQUIPMENT · EQUIPMENT:APPLIANCE:AIR CONDITIONER · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10138594 at NHTSA
Jul 30, 2014Service Bulletin/Repair Instructions

99-01-39-004F

NHTSA communication ID: 10137844

NHTSA source summary · Original PDF not reviewed by Recallfolio

This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.

Source components: EQUIPMENT · EQUIPMENT:APPLIANCE:AIR CONDITIONER.

Source record 10137844 at NHTSA
Jul 30, 2014Service Bulletin/Repair Instructions

PIC5759A

NHTSA communication ID: 10112142

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a message on the radio "maximum number of phones are currently paired to the vehicle". Dealer should advise the customer this is normal operation of the vehicle due to the maximum number of five phones can be paired to a vehicle.

Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10112142 at NHTSA
Jul 30, 2014Service Bulletin/Repair Instructions

PIC4310J

NHTSA communication ID: 10112137

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.

Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).

Source record 10112137 at NHTSA
Jul 30, 2014Service Bulletin/Repair Instructions

PIT5067A

NHTSA communication ID: 10112135

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that may have "Press check to turn off motion sensor" message on the Driver Information Center. If this message is displayed, the vehicle has a General Motors Accessory shock sensor, motion sensor or inclination sensor installed. Dealer should advise the customer this is normal operation with this accessory installed.

Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:ELECTRICAL.

Source record 10112135 at NHTSA
Jul 25, 2014Service Bulletin/Repair Instructions

00-06-01-012E

NHTSA communication ID: 10140437

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.

Source components: ENGINE · EQUIPMENT.

Source record 10140437 at NHTSA
Jul 25, 2014Service Bulletin/Repair Instructions

00-06-01-012E

NHTSA communication ID: 10138592

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10138592 at NHTSA
Jul 25, 2014Service Bulletin/Repair Instructions

00-06-01-012E

NHTSA communication ID: 10137842

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.

Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.

Source record 10137842 at NHTSA
Jul 23, 2014Service Bulletin/Repair Instructions

12-03-10-001B

NHTSA communication ID: 10140436

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides technicians with ways to decrease the tire slipping on the rim and reduce to possible chances of the customers concerns over tire vibration are repair.

Source components: TIRES · WHEELS:RIM.

Source record 10140436 at NHTSA
Jul 23, 2014Service Bulletin/Repair Instructions

12-03-10-001B

NHTSA communication ID: 10138591

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides technicians with ways to decrease the tire slipping on the rim and reduce to possible chances of the customers concerns over tire vibration are repair.

Source components: TIRES · WHEELS:RIM.

Source record 10138591 at NHTSA
Jul 23, 2014Service Bulletin/Repair Instructions

12-03-10-001B

NHTSA communication ID: 10137841

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides technicians with ways to decrease the tire slipping on the rim and reduce to possible chances of the customers concerns over tire vibration are repair.

Source components: EQUIPMENT · TIRES · WHEELS:RIM.

Source record 10137841 at NHTSA
Jul 17, 2014Service Bulletin/Repair Instructions

PIP5163A

NHTSA communication ID: 10112116

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

Source components: ENGINE AND ENGINE COOLING.

Source record 10112116 at NHTSA
Jul 16, 2014Service Bulletin/Repair Instructions

00-00-89-027H

NHTSA communication ID: 10140367

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.

Source components: EQUIPMENT.

Source record 10140367 at NHTSA
Jul 16, 2014Service Bulletin/Repair Instructions

00-00-89-027H

NHTSA communication ID: 10138582

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10138582 at NHTSA
Jul 16, 2014Service Bulletin/Repair Instructions

00-00-89-027H

NHTSA communication ID: 10137832

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.

Source components: EQUIPMENT.

Source record 10137832 at NHTSA
Jul 16, 2014Service Bulletin/Repair Instructions

PIP3783D

NHTSA communication ID: 10112115

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on or reduced engine power message. Technician may find Diagnostic Trouble Codes P2120, P2122, P2123, P2125, P2127, P2128, and/or P2138. Technician will need to inspect the Accelerator Pedal Position circuits for poor terminal tension.

Source components: ENGINE · VEHICLE SPEED CONTROL:ACCELERATOR PEDAL.

Source record 10112115 at NHTSA
Jul 15, 2014Service Bulletin/Repair Instructions

02-00-89-002M

NHTSA communication ID: 10140365

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides additional information to the technicians and how to submit a field product report.

Source components: EQUIPMENT.

Source record 10140365 at NHTSA
Jul 15, 2014Service Bulletin/Repair Instructions

02-00-89-002M

NHTSA communication ID: 10138580

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides additional information to the technicians and how to submit a field product report.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10138580 at NHTSA
Jul 15, 2014Service Bulletin/Repair Instructions

02-00-89-002M

NHTSA communication ID: 10137830

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides additional information to the technicians and how to submit a field product report.

Source components: EQUIPMENT.

Source record 10137830 at NHTSA
Jul 14, 2014Service Bulletin/Repair Instructions

PI0938A

NHTSA communication ID: 10140364

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.

Source components: ELECTRICAL SYSTEM · ELECTRONIC STABILITY CONTROL (ESC).

Source record 10140364 at NHTSA
Jul 14, 2014Service Bulletin/Repair Instructions

PI0938A

NHTSA communication ID: 10138579

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.

Source components: ELECTRICAL SYSTEM · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10138579 at NHTSA
Jul 14, 2014Service Bulletin/Repair Instructions

PI0938A

NHTSA communication ID: 10137829

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.

Source components: ELECTRICAL SYSTEM · EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10137829 at NHTSA
Jul 11, 2014Service Bulletin/Repair Instructions

10-00-89-006D

NHTSA communication ID: 10140363

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information bulletin provides the dealers on how to submit a product information report.

Source components: EQUIPMENT.

Source record 10140363 at NHTSA
Jul 11, 2014Service Bulletin/Repair Instructions

10-00-89-006D

NHTSA communication ID: 10138578

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information bulletin provides the dealers on how to submit a product information report.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10138578 at NHTSA
Jul 11, 2014Service Bulletin/Repair Instructions

10-00-89-006D

NHTSA communication ID: 10137828

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information bulletin provides the dealers on how to submit a product information report.

Source components: EQUIPMENT.

Source record 10137828 at NHTSA
Jul 8, 2014Service Bulletin/Repair Instructions

10-08-46-001B

NHTSA communication ID: 10140359

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Technical bulletin provides a procedure to request a hard mute from Onstar when navigation is annoucing directions and to correct the customers concern of the radio being loud during navigation.

Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).

Source record 10140359 at NHTSA
Jul 8, 2014Service Bulletin/Repair Instructions

10-08-46-001B

NHTSA communication ID: 10138574

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Technical bulletin provides a procedure to request a hard mute from Onstar when navigation is annoucing directions and to correct the customers concern of the radio being loud during navigation.

Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10138574 at NHTSA
Jul 8, 2014Service Bulletin/Repair Instructions

10-08-46-001B

NHTSA communication ID: 10137824

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Technical bulletin provides a procedure to request a hard mute from Onstar when navigation is annoucing directions and to correct the customers concern of the radio being loud during navigation.

Source components: ELECTRICAL SYSTEM · EQUIPMENT.

Source record 10137824 at NHTSA
Jul 8, 2014Service Bulletin/Repair Instructions

PIP4902H

NHTSA communication ID: 10112102

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.

Source components: ELECTRICAL SYSTEM.

Source record 10112102 at NHTSA
Jul 1, 2014Service Bulletin/Repair Instructions

120310001B

NHTSA communication ID: 10245769

NHTSA source summary · Original PDF not reviewed by Recallfolio

Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip

Source components: SUSPENSION · TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS · WHEELS.

Source record 10245769 at NHTSA
Jul 1, 2014Service Bulletin/Repair Instructions

14-00-89-003

NHTSA communication ID: 10140353

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and list the requirements for the dealer to comply.

Source components: EQUIPMENT · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10140353 at NHTSA
Jul 1, 2014Service Bulletin/Repair Instructions

14-00-89-003

NHTSA communication ID: 10137818

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and list the requirements for the dealer to comply.

Source components: EQUIPMENT.

Source record 10137818 at NHTSA
Jun 30, 2014Service Bulletin/Repair Instructions

Recalls

NHTSA communication ID: 10248444

NHTSA source summary · Original PDF not reviewed by Recallfolio

Vehicle Recalls

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10248444 at NHTSA
Jun 27, 2014Service Bulletin/Repair Instructions

PIT5180A

NHTSA communication ID: 10125984

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicle that may have a whistle noise coming from the driver?s side "A" pillar area when driving around 50 mph with the Heater-Vent-Air Conditioning in recirculation mode. Technician will need to reseal the Vehicle Identification Number plate rivets using room temperature vulcanization silicone sealer from the underside.

Source components: EQUIPMENT · VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.

Source record 10125984 at NHTSA
Jun 26, 2014Service Bulletin/Repair Instructions

050308002F

NHTSA communication ID: 10126308

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin was created to aid the technician in diagnosing the difference between a shock or strut that has a fluid residule from a possible external source from a leaking shaft seal.

Source components: SUSPENSION.

Source record 10126308 at NHTSA
Jun 24, 2014Service Bulletin/Repair Instructions

PI1266

NHTSA communication ID: 10126301

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary bulletin explains to the technician to use the vin when reprogramming the radio using the techline/service programming systems.

Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10126301 at NHTSA
Jun 18, 2014Service Bulletin/Repair Instructions

PI0373B

NHTSA communication ID: 10126291

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary bulletin provides a procedure on how to reset the power folding mirriors after they been folded manually, to fix the customers concern of the mirriors shaking or fluttering at normal driving speeds.

Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES.

Source record 10126291 at NHTSA
Jun 16, 2014Service Bulletin/Repair Instructions

PIC5088E

NHTSA communication ID: 10126285

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary bulletin provides procedures on how to reset or refresh the XM radio receiver is the customers states that they only get a few channels.

Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10126285 at NHTSA
Jun 16, 2014Service Bulletin/Repair Instructions

PIC5088E

NHTSA communication ID: 10125956

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that may not receiving all channels on the XM band. Technician will need to use a scan tool and verify current Digital Radio Receiver Status under Data Display. Technician will need to look at the second line labeled Digital Radio Receiver Status will display a number of 00 - 04. Technician will repair per the status code.

Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10125956 at NHTSA
Jun 16, 2014Service Bulletin/Repair Instructions

PIC5588B

NHTSA communication ID: 10125953

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System. For the 2010 and UP model year vehicles, the OnStar set-up procedure and OnStar Activation request have been combined into a single programming event called OnStar Set-up and Activation in Service Programming System.

Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).

Source record 10125953 at NHTSA
Jun 13, 2014Service Bulletin/Repair Instructions

05-00-89-029C

NHTSA communication ID: 10126280

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary bulletin provides a information to the dealer for the requirements need for equipment.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10126280 at NHTSA
Jun 13, 2014Service Bulletin/Repair Instructions

PIP4401E

NHTSA communication ID: 10125947

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that may have the check engine light, tow/haul, Supplemental Inflatable Restraint, cruise control or other various indicators or warning lamps will not come on in the instrument panel. Tech will need to the Tech 2 scan tool to command the instrument panel indicator lights on. If the light do not turn on technician should inspect (AUX HVAC) 10 amp fuse in the under-hood fuse block for open or high resistance.

Source components: ELECTRICAL SYSTEM · EQUIPMENT.

Source record 10125947 at NHTSA
Jun 13, 2014Service Bulletin/Repair Instructions

PIT5209A

NHTSA communication ID: 10125946

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that for no reason the alarm will go active. Technician will need to use a scan tool to verify that the alarm was activated by the inclination sensor. If the trigger is the inclination sensor, inspect the sensor's mounting location. Technician will need to relocate the sensor if it is attached to the driver's side lower Heater-Vent-Air Conditioning duct. Technician will need to reinstall the sensor to the top of the Body Control Module bracket.

Source components: BACK OVER PREVENTION · BACK OVER PREVENTION: BACK-UP ALARM · ELECTRICAL SYSTEM · STRUCTURE.

Source record 10125946 at NHTSA
Jun 12, 2014Service Bulletin/Repair Instructions

12-00-89-002B

NHTSA communication ID: 10126278

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides the dealer with information on what to do when requesting a new key code for the customer.

Source components: EQUIPMENT.

Source record 10126278 at NHTSA
Jun 5, 2014Service Bulletin/Repair Instructions

03-00-89-006K

NHTSA communication ID: 10126275

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information bulletin provides dealers with more information on how to better prep a vehicle for pre-delivery.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10126275 at NHTSA
Jun 3, 2014Service Bulletin/Repair Instructions

PIP4653E

NHTSA communication ID: 10125933

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicle that have a Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0601, P0603, P0604, P062F or P1621 stored in the Transmission Control Module. Technician will need to ensure that the Diagnostic Trouble Codes are set in the Transmission Control Module. If the Diagnostic Trouble Codes are only set in the Transmission Control Module reprogram the Transmission Control Module.

Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).

Source record 10125933 at NHTSA
Jun 1, 2014Service Bulletin/Repair Instructions

PIT5209A

NHTSA communication ID: 10247767

NHTSA source summary · Original PDF not reviewed by Recallfolio

Unwanted Alarm Sounding (GM Accessory Inclination Sensor Mounting)

Source components: EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES.

Source record 10247767 at NHTSA
Jun 1, 2014Service Bulletin/Repair Instructions

PIT5180A

NHTSA communication ID: 10247738

NHTSA source summary · Original PDF not reviewed by Recallfolio

Whistle Noise From Drivers Side A Pillar Area.

Source components: STRUCTURE.

Source record 10247738 at NHTSA
Jun 1, 2014Service Bulletin/Repair Instructions

PIT5209A

NHTSA communication ID: 10247112

NHTSA source summary · Original PDF not reviewed by Recallfolio

Unwanted Alarm Sounding (GM Accessory Inclination Sensor Mounting)

Source components: EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES.

Source record 10247112 at NHTSA
Jun 1, 2014Service Bulletin/Repair Instructions

PIT5180A

NHTSA communication ID: 10247083

NHTSA source summary · Original PDF not reviewed by Recallfolio

Whistle Noise From Drivers Side A Pillar Area.

Source components: STRUCTURE.

Source record 10247083 at NHTSA
May 30, 2014Service Bulletin/Repair Instructions

09-03-10-013B

NHTSA communication ID: 10137937

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides explanation on using the tire sealent in the GM kit as a temporary fix only untill the tire can be properly repaired under the new tire warranty.

Source components: TIRES.

Source record 10137937 at NHTSA
May 29, 2014Service Bulletin/Repair Instructions

12-07-30-001D

NHTSA communication ID: 10137935

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a process to the service agents that are not required to contact PQC, to determine when to replace a assembly as opposed to repairing and if an engine or transmission is being returned, that it has all the information in relation to that part being returned.

Source components: ENGINE · POWER TRAIN.

Source record 10137935 at NHTSA
May 29, 2014Service Bulletin/Repair Instructions

02-07-30-029W

NHTSA communication ID: 10137934

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information to the technician on what parts of an engine or transmission will require the PQC to be notified.

Source components: ENGINE AND ENGINE COOLING · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10137934 at NHTSA
May 29, 2014Service Bulletin/Repair Instructions

PIT5292

NHTSA communication ID: 10112091

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that may have an air condition that has poor performance during high ambient temperatures. Technician will need to check the refrigerant charge and record the recovered amount on the repair order. Technician should recharge the system if needed. Technician will also need to verify if Global Diagnostic System 2 high side readings match a high side pressure gauge. If the readings vary greatly diagnostics will need to be performed.

Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER · EQUIPMENT:ELECTRICAL.

Source record 10112091 at NHTSA
May 28, 2014Service Bulletin/Repair Instructions

03-06-03-004L

NHTSA communication ID: 10137932

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty bulletin explains how to use the EL-50313 Midtronic GR8 Battery tester to test a battery and determin if it is warranty or not.

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10137932 at NHTSA
May 22, 2014Service Bulletin/Repair Instructions

03-03-10-007I

NHTSA communication ID: 10137928

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin explains a normal condition of new tires may shake and vibrate for the first few miles.

Source components: EQUIPMENT · TIRES.

Source record 10137928 at NHTSA
May 22, 2014Service Bulletin/Repair Instructions

00-03-10-006J

NHTSA communication ID: 10137927

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides the technician with information on tire radial force variations and how to balance a tire using the balancer.

Source components: EQUIPMENT · TIRES.

Source record 10137927 at NHTSA
May 21, 2014Service Bulletin/Repair Instructions

PIP4833E

NHTSA communication ID: 10112079

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication advises the technician that the Auxiliary Transmission Fluid Pump Control Module and Auxiliary Transmission Fluid Pump placed on parts restriction by General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.

Source components: EQUIPMENT:MECHANICAL · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10112079 at NHTSA
May 20, 2014Service Bulletin/Repair Instructions

PIT4821D

NHTSA communication ID: 10112078

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication advises the technician that the 2-Mode Drive Motor Generator Battery placed on parts restriction by General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.

Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ENGINE AND ENGINE COOLING.

Source record 10112078 at NHTSA
May 19, 2014Service Bulletin/Repair Instructions

13-00-89-004I

NHTSA communication ID: 10137919

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.

Source components: EQUIPMENT.

Source record 10137919 at NHTSA
May 16, 2014Service Bulletin/Repair Instructions

06-06-05-001F

NHTSA communication ID: 10137915

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin explains a normal condition from changes in Exhaust Tone for Active Fuel Management Engines when in Three or Four Cylinder Mode

Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE.

Source record 10137915 at NHTSA
May 16, 2014Service Bulletin/Repair Instructions

06-00-89-029J

NHTSA communication ID: 10137914

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides tips on how to care for the interior of the vehicle using products.

Source components: EQUIPMENT.

Source record 10137914 at NHTSA
May 14, 2014Service Bulletin/Repair Instructions

PIP3119M

NHTSA communication ID: 10112069

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on at low mileage. Technician may find Diagnostic Trouble Codes P0420 and or P0430 stored. Technician should be advised that the catalytic converter efficiency Diagnostic Trouble Codes P0420 and P0430 are disabled for the first hour of engine run time to allow break-in of the catalytic converter. Technician will need to use a Tech2 to check the verify engine run time on the Engine Hour Meter in the Instrument Panel Cluster Data Display/Data 1 List in the scan tool match. If the engine run time is less than one hour, the battery may have been disconnected, or another vehicle power loss event may have occurred, during vehicle manufacturing. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle. If the catalytic converter was replaced and the Diagnostic Trouble Codes set it may be a result of the engine run time restrictions no longer being in place since the vehicle is no longer new. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle.

Source components: ENGINE · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.

Source record 10112069 at NHTSA
May 9, 2014Service Bulletin/Repair Instructions

05-06-04-035D

NHTSA communication ID: 10137901

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides the technician with information on what E85 fuel may due to a non E85 vehicle.

Source components: FUEL SYSTEM, GASOLINE.

Source record 10137901 at NHTSA
May 7, 2014Service Bulletin/Repair Instructions

PIP4600D

NHTSA communication ID: 10112060

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication advises the technician that the 2ML70 Transmission Assembly will be placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.

Source components: EQUIPMENT:MECHANICAL · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10112060 at NHTSA
May 2, 2014Service Bulletin/Repair Instructions

02-07-30-029V

NHTSA communication ID: 10137890

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information to the technician on what parts of an engine or transmission will require the PQC to be notified.

Source components: ENGINE AND ENGINE COOLING · EQUIPMENT · POWER TRAIN.

Source record 10137890 at NHTSA
Apr 22, 2014Service Bulletin/Repair Instructions

01-08-42-001J

NHTSA communication ID: 10135219

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin explains condensation in exterior lights and replacment guidelines for warranty replacement.

Source components: EXTERIOR LIGHTING.

Source record 10135219 at NHTSA
Apr 22, 2014Service Bulletin/Repair Instructions

02-08-42-001G

NHTSA communication ID: 10135218

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin is to assist with the identification of issues that are not considered warrantable.

Source components: EQUIPMENT.

Source record 10135218 at NHTSA
Apr 22, 2014Service Bulletin/Repair Instructions

09-06-04-028D

NHTSA communication ID: 10135217

NHTSA source summary · Original PDF not reviewed by Recallfolio

This technical bulletin provides a procedure to replace the EVAP canister and vent to correct the customers concern of the fuel tank hard to fill.

Source components: ENGINE AND ENGINE COOLING · FUEL SYSTEM, GASOLINE.

Source record 10135217 at NHTSA
Apr 18, 2014Service Bulletin/Repair Instructions

PIC5491F

NHTSA communication ID: 10111811

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.

Source components: ELECTRICAL SYSTEM · EQUIPMENT.

Source record 10111811 at NHTSA
Apr 17, 2014Service Bulletin/Repair Instructions

PIT3099L

NHTSA communication ID: 10111810

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.

Source components: EQUIPMENT · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10111810 at NHTSA
Apr 16, 2014Service Bulletin/Repair Instructions

PIP5168C

NHTSA communication ID: 10111805

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published ?Engine Cranks But Does Not Run? diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.

Source components: ENGINE · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE).

Source record 10111805 at NHTSA
Apr 15, 2014Service Bulletin/Repair Instructions

14-06-130-001

NHTSA communication ID: 10135202

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on how to disable high voltage safely.

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.

Source record 10135202 at NHTSA
Apr 14, 2014Service Bulletin/Repair Instructions

13-00-89-004H

NHTSA communication ID: 10135201

NHTSA source summary · Original PDF not reviewed by Recallfolio

This information bulletin provides the technician with additional information on fixing the vehicle right the first time by listing possible concerns to specific vehicles.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10135201 at NHTSA
Apr 14, 2014Service Bulletin/Repair Instructions

PI1216

NHTSA communication ID: 10135200

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary bulletin provides a procedure to install a new cabin air filter kit for vehicles that did not have one if the customer whants one installed to fix the concern of dust intruding into cabin interior.

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10135200 at NHTSA
Apr 4, 2014Service Bulletin/Repair Instructions

PIP3343E

NHTSA communication ID: 10111783

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.

Source components: FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS.

Source record 10111783 at NHTSA
Apr 1, 2014Service Bulletin/Repair Instructions

1406130001

NHTSA communication ID: 10250013

NHTSA source summary · Original PDF not reviewed by Recallfolio

High Voltage Safety ? High Voltage Disabling

Source components: ELECTRICAL SYSTEM.

Source record 10250013 at NHTSA
Apr 1, 2014Service Bulletin/Repair Instructions

1406130001

NHTSA communication ID: 10246500

NHTSA source summary · Original PDF not reviewed by Recallfolio

High Voltage Safety ? High Voltage Disabling

Source components: AIR BAGS · EQUIPMENT:ELECTRICAL · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10246500 at NHTSA
Mar 28, 2014Service Bulletin/Repair Instructions

03-06-03-004K

NHTSA communication ID: 10137887

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty bulletin explains how to use the EL-50313 Midtronic GR8 Battery tester to test a battery and determin if it is warranty or not

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.

Source record 10137887 at NHTSA
Mar 24, 2014Service Bulletin/Repair Instructions

PIP3343D

NHTSA communication ID: 10111875

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.

Source components: ENGINE.

Source record 10111875 at NHTSA
Mar 17, 2014Service Bulletin/Repair Instructions

13-00-89-004G

NHTSA communication ID: 10137866

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.

Source components: EQUIPMENT.

Source record 10137866 at NHTSA
Mar 5, 2014Service Bulletin/Repair Instructions

PIT5264

NHTSA communication ID: 10111850

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that when a Canadian customer may comment that when they travel to the United States, they are unable to connect to OnStar or use hands free calling. Dealer can advise the customer that the existing cell phone provider not having roaming agreements in areas outside of Canada. At this time, a customer has the option of contacting OnStar to have a 500 number loaded for OnStar operation while in the United States.

Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10111850 at NHTSA
Mar 5, 2014Service Bulletin/Repair Instructions

PIC5374C

NHTSA communication ID: 10111849

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a frequent "off route" messages while following Turn by Turn route. Technicians will need to remove power from the Vehicle Communication Interface Module for one hour and retest for the concern.

Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).

Source record 10111849 at NHTSA
Mar 5, 2014Service Bulletin/Repair Instructions

PIC5959A

NHTSA communication ID: 10111848

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.

Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10111848 at NHTSA
Mar 4, 2014Service Bulletin/Repair Instructions

PIT4864F

NHTSA communication ID: 10111846

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about a customer?s request to install OnStar Bluetooth. Dealer should be advised at this time, there are no provisions to add this option to vehicles that were not built with it.

Source components: ELECTRICAL SYSTEM:SOFTWARE.

Source record 10111846 at NHTSA
Mar 4, 2014Service Bulletin/Repair Instructions

PIC4801F

NHTSA communication ID: 10111845

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have an OnStar Turn-By-Turn Navigation the system that is inoperative. Technician verifies there are no Diagnostic Trouble Codes are present in the Antilock Braking System and Vehicle Communication Interface Module of the vehicle. If no Diagnostic Trouble Codes found call OnStar using the Blue button on the OnStar key pad and ask the advisor for a turn by turn route. Also make a OnStar personal call and a call into the vehicle. If normal diagnostics do not lead to a resolution technician will need to call General Motors Technical Assistance Center for further assistance.

Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).

Source record 10111845 at NHTSA
Mar 1, 2014Service Bulletin/Repair Instructions

PIT4864F

NHTSA communication ID: 10247681

NHTSA source summary · Original PDF not reviewed by Recallfolio

Information On Requests To Add OnStar Bluetooth Option.

Source components: EQUIPMENT.

Source record 10247681 at NHTSA
Mar 1, 2014Service Bulletin/Repair Instructions

PIT5264

NHTSA communication ID: 10245950

NHTSA source summary · Original PDF not reviewed by Recallfolio

Canadian Customers Unable To Place Calls In The United States

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10245950 at NHTSA
Mar 1, 2014Service Bulletin/Repair Instructions

PIC5959A

NHTSA communication ID: 10073396

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10073396 at NHTSA
Feb 28, 2014Service Bulletin/Repair Instructions

08-08-48-003H

NHTSA communication ID: 10138655

NHTSA source summary · Original PDF not reviewed by Recallfolio

This technical bulletin provides a procedure to install double sided tape to the windshield molding to correct the customers concern of a tapping or clicking noise at the winshield area.

Source components: EQUIPMENT ADAPTIVE/MOBILITY · VISIBILITY:WINDSHIELD.

Source record 10138655 at NHTSA
Feb 26, 2014Service Bulletin/Repair Instructions

PIC5491E

NHTSA communication ID: 10111966

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.

Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:SOFTWARE.

Source record 10111966 at NHTSA
Feb 26, 2014Service Bulletin/Repair Instructions

PIC3011H

NHTSA communication ID: 10111964

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have the OnStar system does not respond properly to some numbers and/or voice commands. Dealer should direct the customer to review the operational characteristics in the OnStar Users Guide.

Source components: ELECTRICAL SYSTEM:SOFTWARE.

Source record 10111964 at NHTSA
Feb 25, 2014Service Bulletin/Repair Instructions

12-07-30-001C

NHTSA communication ID: 10138646

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a process to the service agents that are not required to contact PQC, to determine when to replace a assembly as opposed to repairing and if an engine or transmission is being returned, that it has all the information in relation to that part being returned.

Source components: ENGINE · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN.

Source record 10138646 at NHTSA
Feb 24, 2014Service Bulletin/Repair Instructions

PIP5168B

NHTSA communication ID: 10111956

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published ?Engine Cranks But Does Not Run? diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.

Source components: ENGINE.

Source record 10111956 at NHTSA
Feb 21, 2014Service Bulletin/Repair Instructions

10-08-64-002C

NHTSA communication ID: 10138640

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty bulletin explains how to determine if an outside mirrior was damaged by the customer and what is considered warranty and non-warranty.

Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR.

Source record 10138640 at NHTSA
Feb 21, 2014Service Bulletin/Repair Instructions

12-03-10-002A

NHTSA communication ID: 10138639

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides the technician the proper way to install and torque the wheel.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · WHEELS.

Source record 10138639 at NHTSA