2020 Ford TRANSIT Manufacturer communications & TSBs.Page 2
Original record summaries, dates and identifiers for this model-year. Records 101–177 of 177, ordered newest first. Dated records on this page: Dec 19, 2019–Oct 28, 2021.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Oct 28, 2021Service Bulletin/Repair Instructions
TSB 21-2377
NHTSA communication ID: 10202861
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Transit vehicles may exhibit a harsh engagement/harsh shift/delayed shift. It is also possible to experience an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6, P07F7, P2700, P2701, P2702, P2703, P2704 and/or P2705 stored in the powertrain control module (PCM). This may be due to sticking valves in the main control valve body. To correct the condition, follow the Service Procedure steps to perform the PCM - Transmission Accelerated Main Control Break In routine for the appropriate clutch(s) and/or overhaul main control valve body.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2021 Transit vehicles may exhibit front seat safety belts that do not extend or retract properly or may exhibit an abnormal noise. Verify if the vehicle has been modified, in particular if a bulkhead partition between the front seats and cargo area has been added to the vehicle. Fasteners or holes in the lower b-pillar are indicators that the seat belt retractor mechanism could have been compromised. If diagnostics lead to retractor replacement, inspect for drill or screw holes in the retractor housing. Damage to the seat belt retractor caused by a vehicle modifier is not warrantable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019-2021 Transit vehicles built on or before 11-Feb-2021 may experience a front seat cushion sagging. This may be due to a broken seat suspension mat. To correct this condition, follow the Service Procedure to install additional webbing to the seat frame.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Transit vehicles built on or before 05-Aug-2021 without SYNC may exhibit a concern where the FordPass Connect selection is missing in the instrument panel cluster (IPC) menu and/or the FordPass authorization pop-up does not appear in the IPC after hitting the Activate button on the FordPass app. This may be due to a mis-configured IPC. To correct this condition, download and run the IPC - Instrument Panel Cluster (IPC) Configuration application on the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part number 10849 and applicable labor times from Section 10 of the Service Labor Times Standard (SLTS) Manual.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Transit vehicles may experience a pop/sizzle/crack noise from the exhaust. This may be due to water dripping on the exhaust from the evaporator drain tube. To correct the condition, follow the Service Procedure to extend the the length of the evaporator drain tube.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2020-2021 Model Year Transit Vehicles Equipped with 3.5L PFDI Engines Inactive Smart Acceleration Truncation Feature In all of the affected vehicles, the Smart Acceleration Truncation (SAT) feature is non-functional. The SAT feature is intended to provide common performance for an empty vehicle as would be expected for a fully loaded vehicle. The feature restricts the acceleration capability for empty vehicles where drivers utilize significant accelerator pedal input. When the SAT feature is non-functional, drivers who reach elevated torque/acceleration rates will not see the desired torque de-rate that the feature is expected to deliver.
Source components: ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Transit vehicles may exhibit a harsh engagement into drive. The vehicle may or may not have an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTC) P0772 and/or P2704 in the powertrain control module (PCM). This may be due to sticking valves in the main control valve body. To correct the condition, follow the Service Procedure steps to perform the transmission accelerated main control break-in routine and/or overhaul the main control valve body.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Transit vehicles equipped with factory keyless entry remote may exhibit a broken flip-key at the base of the fob. A broken key can be replaced with the current service part, which is a like-for-like replacement. However, for customers that may require a more robust key due to high key cycle activity, a mechanical key (Rotunda part numbers: pre-cut 164-R8290, uncut 164-R8289) can be programmed to the vehicle and used in conjunction with the original fob that has the broken flip-key for the remote keyless entry functions. To program the keys, refer to Workshop Manual (WSM), Section 419-01B.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Transit vehicles may exhibit an open master fuse in the high current battery junction box. The master fuses are now available as a separate service part and can be replaced without replacing the high current battery junction box or wiring harness. For master fuses F9 (500A), F10 (300A), F11 (250A), and F12 (150A), use service part number LJ8Z-14526-C. For master fuses F1 (125A), F2 (80A), F3 (150A), and F6 (150A), use service part number LJ8Z-14526-D. Tighten M8 nuts to 12 +/- 1.8 Nm (106 +/- 16 lb-in). Tighten M5 nuts to 5.4 +/- 0.9 Nm (48 +/- 8 lb-in).
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK12 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2021 Ford and Lincoln vehicle customers may receive a message in their FordPass or Lincoln Way App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the SYNC Connect or FordPass Connect feature or Lincoln Connect or Embedded Modem Do not replace the TCU or perform any repair to resolve this condition. Refer the owner of the vehicle to Ford Pass Guides or Lincoln Way Concierge Teams to assist in removing the fleet telematics subscription.
Source components: POWER TRAIN:MANUAL TRANSMISSION:INTERNAL:DOGS/SYNCHROS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2016-2021 Ford or Lincoln vehicles equipped with SYNC 3 or SYNC 4 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is considered normal due to the power saving features enabled while in transport mode. It is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure exactly allowing time for the SYNC system to complete its tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles equipped with a 3.5L Duratec engine and all 2021 Transit vehicles built on or before 01-Jul-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021 and P0022. This may be due to the software in the powertrain control module (PCM). To correct the condition, perform a variable camshaft timing (VCT) cycling and reprogram the PCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles equipped with factory keyless entry remote may exhibit a broken flip-key at the base of the fob. Ford has been provided feedback from fleet customers of this condition on some vehicles with high usage profiles. A robustness action is currently under development and expected availability will be provided when determined. In the interim, a broken key should be replaced with the current service part, which is a like-for-like replacement. Continue to monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2021 vehicles equipped with a diesel engine may have engine oil in the exhaust after turbocharger replacement for various reasons. To correct the condition, remove the exhaust and stand the exhaust up with the turbocharger inlet side facing down using a suitable drain pan. Allow the exhaust to drain for at least 24 hours and reinstall. Do not perform a manual exhaust regeneration.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles upfitted by Utilimaster for Amazon may exhibit various heating, ventilation, and air conditioning (HVAC) concerns and/or blind spot, crosswalk, tire pressure monitor faults with one or more communication diagnostic trouble codes (DTC) for the MS1 CAN network. This may be caused by the blind spot information system (BLIS) wiring harness chafing on the Utilimaster installed bumper. Prior to performing Workshop Manual (WSM) diagnostics, remove the rear bumper per WSM Section 501-19 to inspect the BLIS wire harness 15K868 for damage. If damage is not present, continue with normal diagnostics. This information is for diagnostic purposes and the repairs are not covered under the Bumper to Bumper Warranty. Have the customer contact Utilimaster for review of the repair for warranty.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER · STRUCTURE:BODY:BUMPERS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2015-2021 Transit vehicles equipped with dual rear wheels (DRW) have a high mount rear marker lamp that does not illuminate with the stop lamps. This lamp assembly may appear to be a stop lamp but is intended to illuminate with the parking lamps only. This information is available in Workshop Manual Section 417-01. The JDDAB feature code description found under OASIS additional information is common between single rear wheel and DRW vehicles, and incorrectly reflects stop functionality when applied to DRW units.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2021 vehicles supported by FDRS may not list a software update for a module under the SW Updates tab although an SSM or TSB is published for a software update. This may be due to the module already being at the latest software level. A later software level may have been programmed at the assembly plant, during a previous dealer visit or by an over the air (OTA) update for vehicles that have automatic updates enabled in the SYNC system settings. To review a vehicle's OTA update history, visit the Connected Vehicle > OTA Dashboard tab in OASIS. Information about the OTA Dashboard can be found on FMCDealer.com when performing a search on OTA History Job Aid.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018 Focus, 2019 Fiesta, 2019-2020 Transit and 2019-2020 Transit Connect vehicles may exhibit a concern where the radio randomly seeks through FM stations when a Bluetooth device is connected and streaming audio. Engineering is currently working on a solution for this condition. Inform customers that Ford is developing a software fix that is expected in May 2021. In the interim, let the customer know that the radio will still function without Bluetooth and schedule a follow-up appointment with the customer for late February. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2021 Transit vehicles built with manual sliding door(s) may have an incorrectly adjusted ajar switch. To correct this condition, follow the service procedure to readjust the ajar switch.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles may experience a pop/sizzle/crack noise from the exhaust. This may be due to water dripping on the exhaust from the evaporator drain tube. To correct the condition, follow the Service Procedure to extend the the length of the evaporator drain tube.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2021 Transit vehicles built on or before 30-Nov-2020 may experience a slow fill condition and/or illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0171, P0174, P0451, P0455, P0456, P0496 and/or P1450. This may be due to a kinked evaporator emissions fresh air vent line. To correct this condition, follow the Service Procedure to attach a zip tie to the fresh air vent line.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Transit vehicles equipped with a gas engine may exhibit a harsh engagement into drive with or without an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0772 and/or P2704 in the powertrain control module (PCM). This may be due to sticking valves in the main control valve body. Most vehicles will improve and no longer exhibit the condition after the first 8,000 km (5,000 mi) of driving. To correct the condition, follow the Service Procedure steps to perform the transmission accelerated main control break-in routine and/or overhaul the main control valve body.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150/F-Super Duty/Expedition/Navigator and 2020 Explorer/Aviator vehicles may exhibit a 'Trailer Connected' or 'Trailer Disconnected' message in the vehicle's message center with no trailer attached to the vehicle. To address this condition, reprogram the trailer module (TRM) using the appropriate Ford diagnostic scan tool. For claiming use causal part 19H332 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2018-2021 EcoSport/Expedition/Navigator, 2019-2021 Ranger/Transit Connect, 2020-2021 Escape/Explorer/SuperDuty/Transit/Aviator/Corsair, 2021 Bronco Sport/F-150/Mustang/Mach-E the Workshop Manual (WSM) diagnostics may direct to replace a module on vehicles that use Ford Diagnosis and Repair System (FDRS). First, an FDRS session must be created on the vehicle prior to removing the faulted module. Once the session is started, run the Programmable Module Installation and replace the module only when instructed by FDRS. Installing a new module prior to starting a scan tool session may result in incomplete module configuration with DTCs U2100, U2101 and/or U2200. Once a session has been started, continue to follow normal WSM procedures to repair the vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2021 Transit vehicles may experience difficulty opening and/or closing the manual sliding door that will require sliding door adjustment. When performing the sliding door adjustment procedure in Workshop Manual (WSM), Section 501-03, use the following updated torque specs. Step 12 = 70 Nm (52 ft-lb). Step 27 = 40 Nm (30 ft-lb). In step 18, apply Motorcraft Threadlock 262 (TA-26) to the nut before torqueing. The WSM is in the process of being updated to include these revisions.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2021 Transit vehicles equipped with rear wheel drive (RWD), single rear wheel (SRW), and a U-joint at the transmission flange and rear driveshaft may experience a boom/hum/moan noise or vibration from the rear while driving. This noise or vibration is most prevalent at highway speeds (112-121 km/h 7075 mph for 4.10 axle ratio, 121-128 km/h 75-80 mph for 3.73 axle ratio, and 136-145 km/h 85-90 mph for 3.31 axle ratio) and may also be present to a lesser degree at roughly half of those speeds. This may be due to a 2nd order driveline frequency transmitted through the rear drive shaft, rear axle and into the body through the leaf springs. To correct the condition, follow the Service Procedure to install a driveshaft torsional damper.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2021 F-150, Expedition, Navigator, Transit, Aviator and Explorer vehicles may exhibit an illuminated MIL with DTC P025A And/Or DTC U0109 stored in the powertrain control module (PCM). This may be due to an intermittent or partial disconnect of the harness to the fuel pump control module (FPCM) connector, connector pin push-outs or loose/corroded grounds. Inspect FPCM connector, applicable grounds(F-150- G401, Expedition/Navigator- G403, Transit- G401, 2018-2019 Explorer G302, 2020-2021 Explorer/Aviator- G407) and confirm FPCM connector (F-150- C4336, Expedition/Navigator- C433, Transit- C433, 2018-2019 Explorer C3239, 2020-2021 Explorer/Aviator- C4033) is fully seated prior to performing PC/ED diagnostics or replacing any components.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Transit vehicles equipped with a 3.5L Duratec and built on or before 29-Jan-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with any combination of the following diagnostic trouble codes (DTCs): P02EE, P02EF, P02F0, P02F1, P02F2, and/or P02F3. This may be due to the PCM strategy. Perform a keep alive memory (KAM) reset prior any diagnostics or repairs. The KAM reset clears the KAM to a default setting rather than zero. For claiming, use causal part 12A650 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 Ford and Lincoln vehicles equipped with TCU and WiFi Hotspot, May display Vehicle Hotspot feature not enabled on this vehicle when attempting to enter the Hotspot menu. When using the FordPass/Lincoln Way application, the customer may receive a message saying Wi-Fi has been disabled from this vehicle. Check the vehicle specifications or vehicle build information for the mfal code on the PTS website (Detailed Vehicle Specifications). If mfal = WAFAC or WAFAB do not replace the TCU, engineering is currently investigating this condition. Inform customers Ford is developing a software fix that is expected in early March. In the interim, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early March. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles built on 12-Aug-2019 and through 17-Jul-2020 may exhibit a lack of power steering assist on initial engine start-up with DTC U2016:47 stored in the power steering control module (PSCM). If the DTC is present, verify the current software level using the appropriate Ford diagnostic scan tool by opening log viewer for the PSCM and reading the part number listed next to "(PSCM)_FILENAME =". If the current software level is KK21-14D003-AF, update to the latest software level. If DTC U2016:47 returns, continue with diagnostics and repair direction from Workshop Manual, Section 211-02. For claiming, use causal part 3504 and applicable labor operations in Sections 03 and 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Transit vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with all of the following diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM): P2804, P2803, P0713, P0710, P0709, and P0708. This article only applies if all of these DTCs are present. Prior to any diagnosis, inspect connectors C1551, C1280, C1281, and C1520 for partial connections, damage, or pushed out pins and repair as necessary. If a fault is not identified during the inspections of the connectors, continue diagnosis using the appropriate WSM Sections.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles may exhibit an open master fuse in the high current battery junction box. The master fuses are now available as a separate service part and can be replaced without replacing the high current battery junction box or wiring harness. For master fuses F9 (500A), F10 (300A), F11 (250A), and F12 (150A), use service part number LJ8Z-14526-C. For master fuses F1 (125A), F2 (80A), F3 (150A), and F6 (150A), use service part number LJ8Z-14526-D. Tighten M8 nuts to 12 +/- 1.8 Nm (106 +/- 16 lb-in). Tighten M5 nuts to 5.4 +/- 0.9 Nm (48 +/- 8 lb-in).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Ford and Lincoln vehicles may exhibit the vehicle locator feature display the vehicle location incorrectly when using the Ford Pass/Lincoln Way mobile app. Customers may report that the vehicle location that is displayed is the Ford manufacturing facility were the vehicle was assembled, yet all other features work as intended. This may be due to the vehicle location not updating since assembly. If all other Ford Pass/Lincoln Way features work correctly except for the vehicle location, open the customer connectivity settings on the SYNC display and verify that the location setting is enabled. If the setting is currently enabled, disable and then re-enable the feature. If the vehicle location is still displayed incorrectly in the app, follow Workshop Manual section 415-00 for further diagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018 Focus, 2019 Fiesta, 2019-2020 Transit, 2019-2020 Transit Connect, and 2020 EcoSport vehicles may exhibit a concern where the radio randomly seeks through FM stations when a Bluetooth device is connected and streaming audio. Engineering is currently working on a solution for this condition. Inform customers that Ford is developing a software fix that is expected in February 2021. In the interim, let the customer know that the radio will still function without Bluetooth and schedule a follow-up appointment with the customer for late February. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles built on 31-Jul-2020 and through 14-Aug-2020 may experience a forward collision warning light with diagnostic trouble codes (DTC) B1433:54 and U2100:00 set in the cruise control module (CCM) due to being improperly equipped with a CCM. To verify, electrically disconnect the CCM. Once disconnected, perform a self-test on all other equipped modules. After a self test, start the vehicle to determine if the warning light is present. If other modules do not set loss of communication DTCs with the CCM and the warning light is no longer present, remove the CCM and seal/tape the connector to prevent water intrusion and relocate the harness to prevent rattles.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2020 Model Year Multiple Vehicle Lines Front View and Center High Mount Stop Lamp Camera Improper Function In some of the affected vehicles, insufficient electrical conductivity within the Printed Circuit Board (PCB) internal to the camera may lead to intermittent front view or Center High Mount Stop Lamp (CHMSL) camera operation. This could result in a blank or distorted image from the front of the vehicle or of the truck bed Dealers are to replace the front view camera or the CHMSL camera following the dealer bulletin technical information. This service must be performed on all affected vehicles at no charge to the vehicle owner.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:ADAS:HUD:CAMERA/SENSOR · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles equipped with a 3.5L Duratec and built on or before 22-Sep-2020 may exhibit an illuminated malfunction indicator lamp with any combination of the following diagnostic trouble codes (DTCs): P02EE, P02EF, P02F0, P02F1, P02F2, and/or P02F3. This may be due to the PCM strategy. Perform a keep alive memory (KAM) reset prior any diagnostics or repairs. The KAM reset clears the KAM to a default setting rather than zero. For claiming, use causal part 12A650 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 Ford and Lincoln vehicles equipped with TCU and WiFi Hotspot, May display Vehicle Hotspot feature not enabled on this vehicle when attempting to enter the Hotspot menu. When using the FordPass/Lincoln Way application, the customer may receive a message saying Wi-Fi has been disabled from this vehicle. Check the vehicle specifications or vehicle build information for the mfal code. If mfal = WAFAC or WAFAB do not replace the TCU, engineering is currently investigating this condition. Inform customers Ford is developing a software fix that is expected in early January. In the interim, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early January. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 Ford and Lincoln vehicles equipped with a telematics control unit (TCU) may exhibit incomplete user authorization, inoperative remote features and/or a message stating the system cannot access the Lincoln/FordPass Connect feature in the application due to being a fleet vehicle. Replacing the TCU will not resolve this condition. Engineering is currently investigating this condition. Inform customers Ford is developing a software fix that is expected in early January. In the interim, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early January. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 Transit vehicles equipped with rear wheel drive (RWD), single rear wheel (SRW) and a U-joint at the transmission flange and rear driveshaft may experience a boom/hum/moan noise or vibration from the rear while driving. This noise or vibration is most prevalent at highway speeds (112-121 km/h 70-75 mph for 4.10 axle ratio, 121-128 km/h75-80 mph for 3.73 axle ratio, and 136-145 km/h 85-90 mph for 3.31 axle ratio) and may also be present to a lesser degree at roughly half of those speeds. This may be due to a 2nd order driveline frequency transmitted through the rear drive shaft, rear axle and into the body through the leaf springs. To correct the condition, follow the Service Procedure to install a driveshaft torsional damper.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some of the affected all-wheel driver (AWD) vehicles were assembled with mismatched front to rear final drive gear ratios. AWD vehicles with mismatched gear ratios may exhibit front end shudder upon acceleration and/or the Traction Control System (TCS) may activate. If the TCS activates, an icon on the cluster advising the driver that the TCS is active may illuminate, leading to engine torque reduction to slow the vehicle. The transfer case clutch will continue to wear until AWD function becomes unavailable. Some of the affected rear wheel drive (RWD) vehicles were assembled with incorrect rear final drive gear ratios. Drive characteristics are not noticeably changed.
Source components: ENGINE · EQUIPMENT · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with all of the following diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM): P2804, P2803, P0713, P0710, P0709, and P0708. This article only applies if all of these DTCs are present. Prior to any diagnosis, inspect connectors C1551, C1280, C1281, and C1520 for partial connections, damage, or pushed out pins and repair as necessary. If a fault is not identified during the inspections of the connectors, continue diagnosis using the appropriate WSM Sections.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 Transit high roof bus/passenger wagon vehicles may experience a loose or unseated headliner at the C and/or C 1/2 pillar(s) causing visible gaps. This may be due to a lack of retention capability of the headliner locator tabs to the pillar block pins. To correct the condition, install repair coupons to the headliner and replace the headliner air conditioning (A/C) vent foam gaskets.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2009-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil leak from the turbocharger oil supply or return tubes, O-rings or 6.7L pedestal gasket. Although oil may collect on the turbocharger, it is very rare for a turbocharger to leak oil. To isolate the source of the leak, refer to Workshop Manual (WSM), Section 303-00 General Information > Diagnosis and Testing > Engine > Engine Oil Leaks - Fluorescent Oil Additive Method procedure. When an oil leak is present at a turbocharger oil supply or drain tube, remove the affected oil tube and inspect for damage, and replace the O-ring seals, pedestal gasket or oil tube as required. Refer to WSM, Section 303-04. For claiming, use the affected oil tube or pedestal gasket as the causal part and applicable labor operations in Sections 6 and 9 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2020 Model Year Transit vehicles with 3.5L engines and F-150 / Police Interceptor Utility vehicles with 3.3L engines - Cylinder Head Replacement
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles may exhibit an open master fuse in the high current battery junction box. The master fuses are now available as a separate service part and can be replaced without replacing the high current battery junction box or wiring harness. Tighten M8 nuts to 12 +/- 1.8 Nm (106 +/- 16 lb-in). Tighten M5 nuts to 5.4 +/- .9 Nm (48 +/- 8 lb-in).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles built on or before 12-Feb-2020 may exhibit a transmission fluid leak at the transmission fluid cooler. When replacing the transmission fluid cooler, also replace the transmission fluid cooler bracket. Perform the adjustment procedure when reattaching the selector lever cable. Refer to Workshop Manual (WSM), Section 307-05. Clear the transmission adaptive tables and perform an Adaptive Learning Drive Cycle using the appropriate scan tool. Refer to WSM, Section 307-01. Advise the customer that this vehicle is equipped with an adaptive transmission shift strategy. When the adaptive strategy is reset, the computer will begin a relearning process. This process may result in firmer than normal upshifts and downshifts for several days and will improve over time.
Source components: EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Ford and Lincoln vehicles equipped with a TCU may exhibit incomplete user authorization, no authorization pop-up on the SYNC infotainment system, vehicle connectivity concerns, vehicle location disabled message and/or various FordPass/LincolnWay App command/control concerns. To correct these conditions, ensure that customer connectivity settings (CCS) are turned on in the SYNC system. If the concerns persist after CCS is turned on, turn CCS OFF, perform an ignition cycle, and turn CCS settings back on. After any CCS changes, force-close and relaunch the FordPass/ LincolnWay app on the customers phone. Once CCS is turned on, program the TCU to the latest IDS/FDRS version level. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
Source components: ELECTRICAL SYSTEM · ENGINE · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F150/Nautilus/Expedition/Transit/Edge/Escape/Mustang vehicles built on or before 21-Jun-2020 may exhibit various front and/or rear parking aid camera concerns such as poor image quality, flickering and/or completely inoperative. If a vehicle exhibits this condition, replace the affected camera(s). Refer to Workshop Manual (WSM), Section 41313. For claiming, use causal part 19G490 and any applicable labor operations in Section 11 of the Service Labor Time Standards (SLTS) Manual.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
In all of the affected vehicles, the Standard Battery Guard (SBG) feature, typically used by specific third-party converters and upfitters, may not remain active for the period of time specified in the Ford Body & Equipment Mounting Manual (BEMM) after the vehicle is turned off. The SBG feature is used to control accessory power to peripheral devices connected to the vehicle power supply by utilizing the auxiliary fuse panel. For dual-battery equipped vehicles, the SBG can also control accessory power for the Customer Connection Point 2 (CCP2). The SBG feature may timeout prematurely and shut off vehicle accessory power to non-Ford connected peripheral devices at around 15 to 20 minutes rather than the full SBG timeout of 30 minutes on single battery equipped vehicles and 75 minutes on dual-battery equipped vehicles.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement into drive with or without an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0772 and/or P2704 in the powertrain control module (PCM). This may be due to sticking valves in the main control valve body. Most vehicles will improve and no longer exhibit the condition after the first 8,000 Km (5,000 Mi) of driving. To correct the condition, follow the Service Procedure steps to perform the transmission accelerated main control break-in routine and/or replace the main control valve body.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020 Transit, F-Super Duty, F-53 Motorhome/F-59 Commercial, 2021 F-650/F-750/E-series incomplete, chassis Cab, cutaway and stripped chassis vehicles equipped with a lane keeping or departure system are not calibrated from the factory to support final modifications. The final stage manufacturer is responsible for verifying that the lane keeping or departure system camera sensor is properly calibrated within Ford specifications once vehicles are completed. Calibrating the lane keeping or departure system utilizes the Ford scan tool to calibrate the front view camera. Refer to Workshop Manual (WSM) section 419-07. Do not submit a claim for this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020 Transit, F-Super Duty, F-53 Motorhome/F-59 Commercial, 2021 F-650/F-750/E-series incomplete, chassis Cab, cutaway and stripped chassis vehicles equipped with a lane keeping or departure system are not calibrated from the factory to support final modifications. The final stage manufacturer is responsible for verifying that the lane keeping or departure system camera sensor is properly calibrated within Ford specifications once vehicles are completed. Calibrating the lane keeping or departure system utilizes the Ford FDRS scan tool to calibrate the front view camera. Refer to Workshop Manual (WSM) section 419-07. Do not submit a claim for this condition.
Source components: ELECTRICAL SYSTEM · LANE DEPARTURE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020 Transit, F-Super Duty, F-53 Motorhome/F-59 Commercial, 2021 F-650/F-750/E-series incomplete, chassis Cab, cutaway and stripped chassis vehicles equipped with a lane keeping or departure system are not calibrated from the factory to support final modifications. The final stage manufacturer is responsible for verifying that the lane keeping or departure system camera sensor is properly calibrated within Ford specifications once vehicles are completed. Calibrating the lane keeping or departure system utilizes the Ford FDRS scan tool to calibrate the front view camera. Refer to Workshop Manual (WSM) section 419-01. Do not submit a claim for this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles equipped with a 10R80 automatic transmission and under 8,000 Km (5,000 mi) may exhibit a harsh engagement into DRIVE and/or REVERSE with or without an illuminated malfunction indicator lamp (MIL). This may be due to sticking main control valves. A new Ford Diagnosis and Repair System (FDRS) Transmission Accelerated Main Control Break-In routine has been developed to aid in freeing up sticking main control valves. This routine has been added to the Workshop Manual (WSM), Section 307-01.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2016-2020 Ford and Lincoln vehicles equipped with a SYNC 3 Touchscreen may experience the volume control unresponsive from the Front Control Interface Module (FCIM) and steering volume controls when using Apple Car Play. When the Apple device is removed, volume control is restored. This is due to a concern with the Waze Navigation App software and Apple iOS version. To correct the condition, update the Waze App software and iOS to the latest version available and reboot the customer's Apple device. Perform an ignition cycle and reconnect the Apple device via USB. Open Apple Car Play and confirm volume control is restored. Installing/Updating third party software/applications is not warrantable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement into drive with or without an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0772 and/or P2704 in the powertrain control module (PCM). This may be due to sticking valves in the main control valve body. Most vehicles will improve and no longer exhibit the condition after the first 160 km (100 mi) of driving. To correct the condition, follow the Service Procedure steps to replace the main control valve body and/or perform drive procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
In all of the affected vehicles, there are shallow pressed valve seats in the cylinder heads. This may lead to a rough idle, engine misfires with a reduction in power/torque, and a check engine/wrench light illuminated.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit the infotainment system stating in Michigan when trying to select a point of interest using the push to talk feature on the navigation system. Engineering is currently working on a solution for this condition, which is expected to be available in July. Please monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
In all of the affected vehicles, there are shallow pressed valve seats in the cylinder heads. This may lead to a rough idle, engine misfires with a reduction in power/torque and a check engine/wrench light illuminated.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may experience a notification in the FordPass and/or LincolnWay apps that indicates their vehicle has entered "deep sleep mode". This mode is enabled due to the vehicle not being started for 14 consecutive days or battery voltage is at/or below 9.5 volts. Some 2020 models will also set a warning if the telematic control unit (TCU) has received an automatic over the air update. The purpose of deep sleep mode is to conserve battery voltage. When deep sleep mode is enabled, the TCU is powered down and all communication with the FordPass and/or LincolnWay apps are disabled. To wake the vehicle from deep sleep mode, manually start the vehicle. More deep sleep mode information can be found in the FordPass or LincolnWay apps under: More > Guides > click in search entry box > type "deep sleep" and click on "Ask".
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles with no rear floor covering built on or before 16-Dec-2019 are manufactured without the step well pad on the passenger sliding door step. The vehicle is not misbuilt. Do not submit a claim for this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48652 - 2020 Transit - Lack Of Power Steering Assist On Initial Engine Start-Up With Diagnostic Trouble Code (DTC) U2016:47 - Built On Or After 12-Aug-2019 Some 2020 Transit vehicles built on or after 12-Aug-2019 may exhibit a lack of power steering assist on initial engine start-up with DTC U2016:47 stored in the power steering control module (PCSM). If the DTC is present, before performing Workshop Manual (WSM) diagnostics, reprogram the PCSM with the latest software level of the appropriate Ford diagnostic scan tool. If DTC U2016:47 returns, continue with diagnostics and repair direction from WSM, Section 211-02. For claiming, use causal part 3504 and applicable labor operations in Sections 03 and 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48649 - 2020 Various Vehicles - Equipped With Telematics Control Unit (TCU) - Incomplete User Authorization, Vehicle Connectivity/Location And/Or FordPass/LincolnWay Concerns Some 2020 Ford and Lincoln vehicles equipped with a TCU may exhibit incomplete user authorization, no authorization pop-up on the SYNC infotainment system, vehicle connectivity concerns, vehicle location disabled message and/or various FordPass/LincolnWay App command/control concerns. To correct these conditions, ensure that customer connectivity settings (CCS) are turned on in the SYNC system. If the concerns persist after CCS is turned on, turn CCS OFF, perform an ignition cycle, and turn CCS settings back on. After any CCS changes, force-close and relaunch the FordPass/ LincolnWay app on the customers phone. Once CCS is turned on, program the TCU to the latest IDS/FDRS version level. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
Source components: ELECTRICAL SYSTEM · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48618 - 2020 Various Vehicles - Equipped With SYNC 3 - Unable To Schedule Remote Start Using Fordpass Or Lincolnway Applications Some 2020 Ford and Lincoln vehicles may exhibit a symptom of no ability to schedule a remote start event using the FordPass or Lincolnway app. If only the scheduling portion of the remote start system is missing from the mobile app or not functioning, please ensure the customer has installed the latest version of the Ford Pass or Lincoln Way app from the mobile phones app store. The customer may also need to log out of the Ford Pass or Lincoln Way app, and then log back in. If the remote start system is not functioning using the key fob and/or the on-demand remote start function from Ford Pass or Lincoln Way application, refer to Workshop Manual (WSM), Section 303-06 for further diagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Transit vehicles equipped with a 3.5L Duratec and built on or before 14-Jan-2020 may exhibit an illuminated malfunction indicator lamp with any combination of the following diagnostic trouble codes (DTCs): P02EE, P02EF, P02F0, P02F1, P02F2, and/or P02F3. This may be due to the PCM strategy. Perform a keep alive memory (KAM) reset prior any diagnostics or repairs. The KAM reset clears the KAM to a default setting rather than zero. For claiming, use causal part 12A650 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48558 - 2017-2020 Various Vehicles Equipped With Telematics Control Unit (TCU) - Various FordPass/LincolnWay Mobile App Concerns Some 2017-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or no modem electronic serial number (ESN) displayed. To correct this condition prior to programming, remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48552 - 2020 Various Vehicles - Equipped With SYNC 3 - System Stating "In Michigan" When Using Push To Talk Navigation Some 2020 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit the infotainment system stating in Michiganwhen trying to select a point of interest using the push to talk feature on the navigation system. Engineering is currently working on a solution for this condition, which is expected to be available in May. Please monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48551 - 2020 Various Vehicles Equipped With SYNC 3 Various SYNC Performance Related Concerns Some 2020 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit various performance related concerns such as: intermittent frozen or blank screen, voice prompts with excessive pause between words, remote start not able to be scheduled from Ford Pass or Lincoln Way, Sirius Travel link not working properly, CarPlay not launching on connection or a black screen when connected. To correct this condition, check for SYNC software update on FDRS or Oasis under SYNC the section. If an update is available, refer to WSM section 415-00 to update the APIM software. If the problem persists after programming or no update is available, refer to WSM, Section 415-00 for diagnosis. For claiming, use causal part 14G371 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
In some of the affected vehicles, the incorrect rear climate control heater lines may be installed allowing contact between the heater lines and the drive shaft. This contact may cause an underbody noise concern, and if left uncorrected, may lead to loss of engine coolant.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Escape/Corsair, Edge, Explorer, Fusion, Ranger, Transit Connect Vehicles equipped with a TCU may exhibit a "Battery Backup Component Failure" message in the cluster. This may be accompanied by DTC 1477-09 - Backup Battery Component Failure. This may be due to the TCU experiencing a sudden temperature change. To correct this condition, reprogram the TCU using the appropriate Ford diagnostic scan tool. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019-2020 Transit Connect vehicles may exhibit an inoperative electrical AC power outlet socket built on or after 28-May-2018. This may be due to a body control module (BCM) software missing a signal to the alternating current to direct current (AC/DC) inverter control module. To correct the condition, reprogram the BCM with the latest level of the appropriate Ford diagnostic scan tool. For claiming use causal part 14A068 and applicable labor operations in Section 03 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Ford and Lincoln vehicles may exhibit a symptom of no ability to schedule a remote start event using the FordPass or Lincolnway app. If only the scheduling portion of the remote start system is not functioning, no repair attempts should be made to correct this condition. If the remote start system is not functioning using the key fob and/or the on-demand remote start function from FordPass or Lincolnway application, refer to Workshop Manual (WSM), Section 303-06 for further diagnosis. Do not attempt repairs at this time. Engineering is currently investigating, monitor OASIS for updates.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
NEW VEHICLE DELIVERY HOLD - Customer Satisfaction Program 19B42 Certain 2020 Model Year Transit Vehicles With All Wheel Drive and Rear Climate Control Rear Heater Coolant Lines Inspection and Repair