2009 Ford F-250 Manufacturer communications & TSBs.Page 1
Original record summaries, dates and identifiers for this model-year. Records 1–13 of 13, ordered newest first. Dated records on this page: Feb 19, 2009–Jan 12, 2016.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Jan 12, 2016Service Bulletin/Repair Instructions
PC-01.12.2016
NHTSA communication ID: 10179912
NHTSA source summary · Original PDF not reviewed by Recallfolio
In monitoring our technical service inquiries and technical service bulletins from Ford, there is the potential for moderate to severe steering wheel oscillation (wobble) to occur. After extensive testing and outside feedback, the following details have been established to correct or prevent steering wheel oscillation occurrences in lifted 05-16 Ford Super Duty 4wd pickups.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. CATALYST Y PIPE WARRANTY EXTENSION.. IN SOME OF THE AFFECTED VEHICLES, CERTAIN VEHICLE OPERATING CONDITIONS CAN CAUSE THE CATALYST SUBSTRATE TO CRACK OR MELT. THIS CAN CAUSE SYMPTOMS INCLUDING BUT NOT LIMITED TO AUDIBLE NOISE FROM THE CATALYST Y PIPE AND/OR MALFUNCTION INDICATOR LAMP ILLUMINATION. CSC LETTER WAS RECEIVED. *PE
Source components: ELECTRICAL SYSTEM:SOFTWARE · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: SUPPLY/RETURN LINES INSTALLATION AT HIGH PRESSURE PUMP-REVISED WASHER FOR TRUCKS EQUIPPED WITH 6.4L ENGINES. WHEN INSTALLING SUPPLY OR RETURN LINES AT HIGH PRESSURE PUMP ON DIESEL ENGINES, DO NOT USE THE BONDED STYLE WASHER (W302870), USE ONLY THE HYBRID STYLE WASHER (W303659). *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: SOME TRUCKS WITH 6.4L ENGINE WILL RUN ROUGH, SMOKES, OR NO START DUE TO GASOLINE OR ALCOHOL IN THE FUEL. GASOLINE/ALCOHOL LACK THE LUBRICITY OF DIESEL FUEL AND WILL CAUSE FUEL SYSTEM FAILURE. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · FUEL SYSTEM, DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD TRUCKS: ON SOME TRUCKS EQUIPPED WITH A 6.4L DIESEL ENGINE, WITH LESS THAN 5000 MILES, MAY EXHIBIT DIAGNOSTIC TROUBLE CODES P0404 AND/OR P1335. THIS MAY BE DUE TO WELD SLAG/DEBRIS, FROM TURBO UP-PIPE MANUFACTURING PROCESS, BEING STUCK IN THE EGR VALVE AND PREVENTING IT FROM SEATING PROPERLY. MODELS F SUPER DUTY-F250-F550. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. VEHICLES FUEL INJECTOR O RINGS CAN PREMATURELY WEAR. AS A RESULT, FUEL MAY LEAK INTO CRANKCASE CAUSING OIL LEVEL TO RISE. HIGH OIL LEVELS CAN CAUSE DRIVABILITY CONCERNS AND ULTIMATELY LEAD TO ENGINE DAMAGE. CSC LETTER WAS RECEIVED. *PE UPDATED 12/08/09. CSC LETTER WAS REC'D. *PE