2020 Ford F-250 SD Manufacturer communications & TSBs.Page 3
Original record summaries, dates and identifiers for this model-year. Records 201–298 of 298, ordered newest first. Dated records on this page: Nov 21, 2019–Mar 29, 2021.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Mar 29, 2021Service Bulletin/Repair Instructions
SSM 49708
NHTSA communication ID: 10189610
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150/F-Super Duty/Expedition/Navigator and 2020 Explorer/Aviator vehicles may exhibit a 'Trailer Connected' or 'Trailer Disconnected' message in the vehicle's message center with no trailer attached to the vehicle. To address this condition, reprogram the trailer module (TRM) using the appropriate Ford diagnostic scan tool. For claiming use causal part 19H332 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with only diagnostic trouble code (DTC) P0315 stored in the powertrain control module (PCM). If no drivability concerns are present, clear the DTC and retest. If the DTC returns, perform normal diagnostics per the Powertrain Control/Emissions Diagnosis (PC/ED) Manual. If the DTC does not return, inform the customer that Ford is developing a PCM software fix that is expected in June, 2021. Advise the customer that vehicle durability is not affected by the condition and they can continue to drive the vehicle. Schedule a follow up appointment for repair in June, 2021. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 F-Super Duty vehicles may exhibit an inoperative radio, no communication with the audio front control module (ACM), and/or diagnostic code (DTC) U0184 stored in the SYNC module (APIM) or instrument panel cluster (IPC). If the vehicle is in transport mode, disable transport mode and retest. Refer to Workshop Manual (WSM), Section 419-10. If the concern is still present, perform a radio power reset by removing fuse F32 in the body control module (BCM) for 5 minutes. Reinstall the fuse and retest. If the concern is present, disconnect connector C240A from the ACM, reconnect, and retest. If the vehicle still exhibits the concern, refer to WSM, Section 415-00 and proceed with normal diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2018-2021 EcoSport/Expedition/Navigator, 2019-2021 Ranger/Transit Connect, 2020-2021 Escape/Explorer/SuperDuty/Transit/Aviator/Corsair, 2021 Bronco Sport/F-150/Mustang/Mach-E the Workshop Manual (WSM) diagnostics may direct to replace a module on vehicles that use Ford Diagnosis and Repair System (FDRS). First, an FDRS session must be created on the vehicle prior to removing the faulted module. Once the session is started, run the Programmable Module Installation and replace the module only when instructed by FDRS. Installing a new module prior to starting a scan tool session may result in incomplete module configuration with DTCs U2100, U2101 and/or U2200. Once a session has been started, continue to follow normal WSM procedures to repair the vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine may experience a lack of power due to snow packing of the engine air cleaner when operating in extremely snowy conditions. Diagnostic trouble code (DTC) P1548 may be present in the powertrain control module (PCM). A heavy snow environment pre-filter service kit (service part LC3Z-9K635-AA) is now available for use but is not a warrantable item. It is recommended that the service kit be removed at temperatures greater than 50F (10C) and reinstall in subsequent winter seasons in order to maintain optimal vehicle performance. The service kit instructions mention that air filter FA-2031 is required, however the heavy snow environment pre-filter service kit can be used with either engine air filter FA-1951, or FA-2031 once it is available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles built on or before 10-Jul-2020 and equipped with an electronic steering actuator may exhibit increased steering effort at initial engine start-up, a Steering Assist Fault message present, and/or an illuminated steering warning indicator with diagnostic trouble code (DTC) U0131 stored in the instrument panel cluster (IPC). This may be due to the software in the power steering control module (PSCM). To correct the condition, follow the Service Procedure to update the software in the PSCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L diesel engine or a 7.3L gas engine and dual alternators may require disabling or enabling the use of the second alternator. The FDRS scan tool now has an application available to allow for disabling or enabling the use of the second alternator. Start a vehicle session in FDRS using the vehicles VIN and go to the toolbox tab. The PCM will have an application called Generator Configuration. Download and run this application to enable or disable the second alternator. Next perform a Battery Monitor System (BMS) Reset. Download and run this reset and clear any DTCs.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Feb-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with various fuel system related diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM). While performing pinpoint test (PPT) M in the Powertrain Control/Emissions Diagnosis (PC/ED) Manual, the fuel pressure control valve (F_PCV) and/or fuel volume control valve (F_VCV) parameter identifications (PIDs) may not have an option to manually command them with the scan tool. This may be due to the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Feb-2021 may exhibit a thump/whine/knock noise from the fuel tank at idle or during key on, engine off (KOEO). The noise may be more pronounced at fuel levels at or below 1/4 tank. This may be due to the fuel pump strategy in the powertrain control module (PCM) software. To correct the condition, follow the Service Procedure to reprogram the PCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 10-Feb-2021 may exhibit an illuminated powertrain malfunction indicator (wrench) lamp with only diagnostic trouble code (DTC) P07F6 stored in the transmission control module (TCM). The vehicle may also exhibit harsh engagements, poor shift quality and/or loss of 9th gear as a result of the DTC being set. This may be due to the software in the TCM. To correct the condition, follow the Service Procedure to reprogram the TCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 20-2336 to update the Title, Issue, Action, vehicles affected and production fix date. Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Feb-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300-P0308, P054F, P0603, P203B, P208B, P208C, P20EE, P2201, P24C2, P27B4, and/or P27B5 stored in the powertrain control module (PCM). The vehicle may also exhibit a forced idle condition. This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2020 Model Year Super Duty F250-F600 Vehicles Equipped with a 10R140 Transmission - Number One Planetary and Ring Gear Assembly In all of the affected vehicles, a distressed No. 1 planetary needle bearing inside the ring gear assembly will generate contamination that may produce rough shifts. A wrench light is likely to come on, and the transmission may go into safe mode and only operate in seventh gear. As damage progresses, the transmission may only be capable of limited vehicle speed or may not engage in forward or reverse
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2021 F-Super Duty vehicles equipped with a 6.7L diesel may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2459, P246C and/or P2463 with a Drive to Clean maintenance message. Vehicles operated primarily in a stationary or off-highway low speed use may exhibit frequent exhaust regeneration attempts. In these conditions, a vehicle may not easily allow for normal exhaust regeneration and may benefit from operator commanded regeneration (OCR) capability so it can perform complete exhaust regeneration in a stationary setting.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2021 F-Super Duty vehicles may intermittently exhibit excessive steering oscillation. A new instructional video has been published in the Workshop Manual (WSM) to provide specific measurement instructions on the appropriate tools and methods to determine which steering linkage joints are exceeding lash specifications and which are operating as designed. The left side tie rod end and sector shaft arm drag link joints should not be replaced without obtaining the proper lash measurements. Refer to WSM, Section 211-03 Steering Linkage > Diagnosis and Testing > Symptom Chart.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 Ford and Lincoln vehicles equipped with TCU and WiFi Hotspot, May display Vehicle Hotspot feature not enabled on this vehicle when attempting to enter the Hotspot menu. When using the FordPass/Lincoln Way application, the customer may receive a message saying Wi-Fi has been disabled from this vehicle. Check the vehicle specifications or vehicle build information for the mfal code on the PTS website (Detailed Vehicle Specifications). If mfal = WAFAC or WAFAB do not replace the TCU, engineering is currently investigating this condition. Inform customers Ford is developing a software fix that is expected in early March. In the interim, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early March. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Jun-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) U029D, U029E, P22A7 and/or P2209 in the powertrain control module (PCM). This may be due to water intrusion into the oxides of nitrogen (NOx) connectors. To correct the condition, follow the Service Procedure to inspect the NOx sensor module and replace the 14406 wire harness.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005-2021 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2021 F-Super Duty and 2016-2021 F650-750 with 6.7L diesel engines, 2015-2019 Transit with 3.2L diesel engines and 2018-2021 F-150 with 3.0L diesel engines may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P206C in the powertrain control module (PCM). Review of repair data supports that P206C is often the result of incorrect diesel exhaust fluid (DEF) concentration. Per Powertrain Control/Emissions Diagnosis (PC/ED) Pinpoint Test (PPT) RJ, a DEF concentration reading below 28% will set P206C and cause vehicle derate. If low concentration is suspected, drain fluid and replace with known good DEF before replacing any parts. Low concentration of DEF is not a warrantable condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Super Duty vehicles equipped with an 10R140 automatic transmission may exhibit an illuminated malfunction indicator lamp (MIL) and/or powertrain malfunction (wrench) indicator lamp with diagnostic trouble codes (DTCs) P0715, P0716, P0717, P0718, P07BF and/or P07C0 stored in the powertrain control module (PCM). If any of these DTCs are set, focus diagnostics on the turbine shaft speed sensor (TSS) and/or TSS circuits. Refer to Workshop Manual (WSM), Section 307-01. Replacement of the ISSA or ISSB sensor will not correct this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 F-Super Duty vehicles with 6.7L and 10R140 powertrain may exhibit an illuminated powertrain malfunction indicator (wrench) lamp with only DTC P07F6 stored in the transmission control module (TCM). The vehicle may also exhibit harsh engagements, poor shift quality and/or loss of 9th gear as a result of the DTC being set. If no additional DTCs or symptoms are present, clear keep alive memory and transmission adaptive tables with the appropriate Ford diagnostic scan tool, and perform an adaptive learning drive cycle. Transmission replacement is not necessary. Inform customers that a further improved calibration will be available in early March 2021. Let the customer know they can continue to drive the vehicle after performing this SSM, and schedule a service appointment for early March 2021. Monitor OASIS for updates.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2011-2021 F-Super Duty and 2016-2021 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit a high/elevated idle condition. During prolonged idle time, vehicles may experience this high/elevated idle to reduce buildup of unburned hydrocarbons from the SCR system. The powertrain control module (PCM) estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 revolutions per minute (rpms) for ambient temperatures near 26C (80F) and may increase to as high as 1200 rpms at -40 C (-40F). These elevated idle periods can last from 20-40 minutes, depending on ambient temperatures. During power take off (PTO) use and already using idle set point control, the elevated speed is disabled. It is required that the operator monitor the vehicle and adhere to the Exhaust Filter warning messages.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Ford and Lincoln vehicles may exhibit the vehicle locator feature display the vehicle location incorrectly when using the Ford Pass/Lincoln Way mobile app. Customers may report that the vehicle location that is displayed is the Ford manufacturing facility were the vehicle was assembled, yet all other features work as intended. This may be due to the vehicle location not updating since assembly. If all other Ford Pass/Lincoln Way features work correctly except for the vehicle location, open the customer connectivity settings on the SYNC display and verify that the location setting is enabled. If the setting is currently enabled, disable and then re-enable the feature. If the vehicle location is still displayed incorrectly in the app, follow Workshop Manual section 415-00 for further diagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 F-Super Duty vehicles equipped with a 6.2L or 7.3L gas engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0339 stored in the powertrain control module (PCM) or the vehicle may exhibit a runs rough concern with no DTCs. This may be due to a concern with contamination on the crankshaft position (CKP) sensor. If pinpoint test JD in the Powertrain Control/Emissions Diagnosis (PC/ED) Manual leads to CKP sensor replacement, inspect the sensor for contamination and document the results in the warranty claim. Use causal part 6C315 and utilize labor operation 12650D57D in the Service Labor Time Standards (SLTS) Manual.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 10R140 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift with or without an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTCs) P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6, P07F7, P0751, P0756, P0761, P0766, P0771, P2707, P2700, P2701, P2702, P2703, P2704 and/or P2705 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to sticking valves in the main control valve body. Most vehicles will improve and no longer exhibit the condition after the first 8,000 km (5,000 mi) of driving. To correct the condition, follow the Service Procedure steps to perform the transmission accelerated main control break in routine for the appropriate clutch(es) and/or replace the main control valve body.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 10R140 transmission built on or before 7-Nov-2020 may exhibit a ticking or scraping noise coming from the bellhousing. The noise may or may not go away while in PARK and/or NEUTRAL. This may be due to the torque converter studs contacting the flexplate inspection cover and/or internal torque converter damper spring contact. To correct the condition, inspect and adjust the flexplate inspection cover (gas engine only) and/or replace the torque converter (gas or diesel engine).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 10R140 automatic transmission and built on or before 21-Sep-2020 may exhibit a lack of power with an illuminated malfunction indicator lamp (MIL) and/or wrench lamp with diagnostic trouble codes (DTCs) P0715, P0716, P0717 and or P07C0 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the turbine shaft speed (TSS) sensor. To correct the condition, follow the Service Procedure to replace the TSS sensor.
Source components: EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2020 Model Year Multiple Vehicle Lines Front View and Center High Mount Stop Lamp Camera Improper Function In some of the affected vehicles, insufficient electrical conductivity within the Printed Circuit Board (PCB) internal to the camera may lead to intermittent front view or Center High Mount Stop Lamp (CHMSL) camera operation. This could result in a blank or distorted image from the front of the vehicle or of the truck bed Dealers are to replace the front view camera or the CHMSL camera following the dealer bulletin technical information. This service must be performed on all affected vehicles at no charge to the vehicle owner.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:ADAS:HUD:CAMERA/SENSOR · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2020 Model Year Super Duty and 2021 Model Year Medium Duty Vehicles Equipped with a 6.7L Engine Left Hand Side High Pressure Fuel Rail Replacement. In some of the affected vehicles, the vehicle may have been built with a high pressure fuel rail where the internal fuel orifice may become dislodged. If the fuel orifice becomes dislodged, it can travel down and damage the pressure control valve pintle resulting in a Diagnostic Trouble Code (DTC) P0088. Before demonstrating or delivering any new in-stock vehicles involved in this program, dealers are to replace the left hand side high pressure fuel rail using the technical instructions, even if DTC P0088 is not present. This service must be performed on all affected vehicles at no charge to the vehicle owner.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with the 6.2L or 7.3L engine built on or before 05-Jun-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0132, P0135, P0138, P0141, P0152, P0155, P0158 and/or P0161 stored in the powertrain control module (PCM). This may be due to water intrusion into heated oxygen sensor (HO2S) connectors C141, C142, C1571 and/or C1572 on the transmission harness where it connects to the engine exhaust sensors. To correct the condition, follow the Service Procedure steps to replace the transmission harness and the affected heated oxygen sensors (HO2S) and/or the catalyst monitor sensor.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 Ford and Lincoln vehicles may exhibit inoperative remote features via the Ford Pass/Lincoln Way mobile app, incomplete user authorization, no modem electronic serial number (ESN) displayed or DTCs U2100 and/or B156D in the telematics control unit (TCU). These symptoms may persist even after performing a TCU software update and/or replacement. To correct this condition, start a new session with the latest version of the appropriate diagnostic scan tool and perform a PMI on the TCU. If issues persist, open a hotline assistance request and include the IDS version (if applicable) used to perform the PMI and the Authorization Status PID value in the TCU datalogger. For claiming use causal part 14H092 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with an aftermarket bed may exhibit inoperative trailer lights on one or both sides of trailer after performing the FDRS Turn Signal Lamp Configuration application on the vehicle. Version 12 of this application is now available on the FDRS to address this trailer lighting condition. Make sure to download version 12 or later of the FDRS Turn Signal Lamp Configuration and follow the on screen prompts to configure the aftermarket bed. Verify the trailer lighting is operating correctly once complete. If the Turn Signal Lamp Configuration application was previously run on the vehicle, make sure to run the BCM Reset option before re-running the application.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EXTERIOR LIGHTING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 Ford and Lincoln vehicles equipped with TCU and WiFi Hotspot, May display Vehicle Hotspot feature not enabled on this vehicle when attempting to enter the Hotspot menu. When using the FordPass/Lincoln Way application, the customer may receive a message saying Wi-Fi has been disabled from this vehicle. Check the vehicle specifications or vehicle build information for the mfal code. If mfal = WAFAC or WAFAB do not replace the TCU, engineering is currently investigating this condition. Inform customers Ford is developing a software fix that is expected in early January. In the interim, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early January. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 Ford and Lincoln vehicles equipped with a telematics control unit (TCU) may exhibit incomplete user authorization, inoperative remote features and/or a message stating the system cannot access the Lincoln/FordPass Connect feature in the application due to being a fleet vehicle. Replacing the TCU will not resolve this condition. Engineering is currently investigating this condition. Inform customers Ford is developing a software fix that is expected in early January. In the interim, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early January. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 MKZ, 2019-2020 EcoSport/Mustang/Continental/Fusion/F-150/Transit Connect/Ranger/Edge/Nautilus and 2020 Escape/Corsair/Aviator/Explorer/Expedition/Navigator/F-Super Duty vehicles with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-150/F-Super Duty vehicles built on 18-May-2020 and through 30-Jun-2020 may exhibit a concern where the right rear door lock is inoperative but the manual lock rod works. This may be due to stack up tolerances of the handle, cable and latch. To correct the condition, follow the Service Procedure to remove the cable barrel sleeve.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-250/F-350 vehicles may require replacement of the front brake caliper. If replacement of a front caliper is required to repair a vehicle for a pull while braking or brakes binding concern replace the caliper along with the caliper slides and caliper anchor bracket. For claiming use causal component 2B120 or 2B121 and applicable labor times from Section 02 in the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit an illuminated malfunction indicator lamp (MIL) and diagnostic trouble code (DTC) P20EE. The Powertrain Controls and Emissions Diagnosis (PC/ED) pinpoint test RD15 has been updated to perform a Diesel Particulate Filter (DPF) Manual Regeneration twice along with performing the Specified Function SCR Parameter Reset with the appropriate Ford diagnostic scan tool.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 6.7L engine built on or before 19-Aug-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0300-P0308, P0603, P203B, P208B, P208C, P2201, P24C2, P27B4, P07F6 and/or P27B5 stored in the powertrain control module (PCM). The vehicle may also exhibit a forced idle condition. This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
Source components: ELECTRICAL SYSTEM:SOFTWARE · ENGINE AND ENGINE COOLING · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty and 2021 F-650/F-750 vehicles equipped with a 6.7L diesel engine built on 01-Mar-2020 and through 31-Aug-2020 may exhibit an illuminated malfunction indicator light (MIL) with diagnostic trouble code (DTC) P0088. This may be due to the pressure control valve in the left fuel rail. To correct the condition, replace the left fuel rail along with the pressure control valve (PCV). For F-250 through F-550 vehicles refer to Workshop Manual (WSM), Section 303-04B. For F-650/F-750 vehicles refer to WSM, Section 303-04A. For claiming use causal part 9D280 and applicable labor operations in Section 09 of the Service Labor Time Standards (SLTS) Manual.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 MKZ, 2019-2020 Mustang/Continental/Fusion/F-150/Transit Connect/ Ranger/Edge/Nautilus and 2020 Escape/Corsair/Aviator/Explorer/Expedition/ Navigator/F-Super Duty vehicles with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM · ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:SOFTWARE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 F-150 except Raptor, 2017-2020 F-Super Duty, 2018-2020 Expedition vehicles equipped with a front camera washer may exhibit a washer fluid leak at the front camera washer jet when not in use. This may be due to the rubber seal internal to the jet. To correct the condition, follow the Service Procedure to replace the washer jet.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles may exhibit a condition where the engine will not turn off and/or have various electrical symptoms including a dead battery, horn stays on and no crank/no start. This may be a result of water/moisture intrusion into the battery junction box (BJB). The BJB is located under the hood of the vehicle. This water/moisture intrusion may be related to the BJB cover not installed completely or broken cover tabs/locking fingers allowing water/moisture into the BJB. To correct the condition, follow the Service Procedure steps to inspect for water/moisture intrusion into the BJB and replace the BJB if water/moisture intrusion is found.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 6.7L diesel engine and built on or before 18-Aug-2020 may exhibit an illuminated powertrain malfunction indicator (wrench) lamp with only diagnostic trouble code (DTC) P07F6 stored in the transmission control module (TCM). This DTC may be accompanied by harsh engagements, a poor shift quality feel and/or loss of 9th gear as a result of the DTC being set. If no additional codes or symptoms are present, clear the DTC with the appropriate Ford diagnostic scan tool and schedule a follow-up appointment for service mid-September. Inform the customer that engineering is working to implement a solution and advise the customer that they can continue to drive the vehicle. Once available, contact the customer and confirm a service appointment. Monitor OASIS for updates.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 Transit vehicles equipped with a 3.2L engine, 2018-2020 F-150 vehicles equipped with a 3.0L engine, 2017-2020 Super Duty vehicles equipped with a 6.7L engine built on or after 13-May-2017 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2002 stored in the powertrain control module (PCM). This may be due to a crack in the diesel particulate filter (DPF) substrate. To correct the condition, follow the Service Procedure steps to replace the DPF.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Ford and Lincoln vehicles equipped with a TCU may exhibit incomplete user authorization, no authorization pop-up on the SYNC infotainment system, vehicle connectivity concerns, vehicle location disabled message and/or various FordPass/LincolnWay App command/control concerns. To correct these conditions, ensure that customer connectivity settings (CCS) are turned on in the SYNC system. If the concerns persist after CCS is turned on, turn CCS OFF, perform an ignition cycle, and turn CCS settings back on. After any CCS changes, force-close and relaunch the FordPass/ LincolnWay app on the customers phone. Once CCS is turned on, program the TCU to the latest IDS/FDRS version level. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
Source components: ELECTRICAL SYSTEM · ENGINE · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app , incomplete user authorization and/or no modem electronic serial number (ESN) displayed. To correct this condition prior to programming, remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 MKZ, 2019-2020 Mustang/Continental/Fusion/F-150/Transit Connect/ Ranger/Edge/Nautilus and 2020 Escape/Corsair/Aviator/Explorer/Expedition/ Navigator/F-Super Duty vehicles with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2020 F-Super Duty, 2015-2019 Transit, 2016-2021 F-650/F-750 and 2018-2020 F-150 vehicles equipped with a 6.7L, 3.2L or 3.0L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P207F, P20EE, P229F, P2201 and/or P24AE. This may be a result of using aftermarket cleaning liquids or tools for the exhaust gas recirculation (EGR) cooler or intake. Ford does not recommend the cleaning of diesel intakes or EGR coolers using any aftermarket tool that injects a cleaning foam or liquid substance into the EGR cooler or intake. Using these types of fluids can result in sodium poisoning of the NOx and particulate matter (PM) sensors resulting in degraded operation and permanent damage to the after treatment system. Use of these cleaning tools may void the emissions warranty of the hot end after treatment exhaust system and the attached emissions sensors.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · FUEL SYSTEM, DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a no crank concern with an illuminated malfunction indicator lamp (MIL) due to low fuel level or low fuel pressure. The most common diagnostic trouble codes (DTCs) associated with a low fuel pressure concern are P0087 and P008A. Prior to performing Powertrain Controls and Emissions Diagnosis (PC/ED) Section diagnostics for a no crank concern, verify the vehicle is not out of fuel or has a low fuel pressure concern. The no crank symptom after a low fuel pressure event is new for the 2020 model year.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit an illuminated malfunction indicator lamp (MIL) and diagnostic trouble code (DTC) P20EE. The Powertrain Controls and Emissions Diagnosis (PC/ED) pinpoint test RD15 has been updated to perform a diesel particulate filter (DPF) manual regeneration with the appropriate Ford diagnostic scan tool twice along with performing a diesel particulate filter (DPF) parameter reset and drive cycle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-Super-Duty vehicles equipped with a 6.7L diesel engine may exhibit hard start, lack of power or runs rough concern with malfunction indicator light (MIL) and diagnostic trouble codes (DTCs) P0087 and/or P008A. This may be due to low fuel level or fuel gelling in cold ambient temperatures. If no root cause is determined after normal PCED diagnostic test MA recommend that customer use a different brand of fuel and Motorcraft PM-23-A Diesel Fuel Anti-Gel and Performance Improver. Inform the customer that Bio Diesel blended fuels have a higher occurrence of fuel gelling. Fuel gelling and or low fuel conditions causing a P0087 and/or P008A is not covered under warranty.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles built on or before 26May-2020 equipped with a high mounted stoplamp camera, may exhibit various concerns such as poor image quality, flickering and/or intermittent blank screen. If a vehicle exhibits any of these conditions replace the high mounted stoplamp camera. Refer to Workshop Manual (WSM), Section 417-01. For claiming, use causal part 19G490 and applicable labor operations in Section 11 of the Service Labor Time Standards (SLTS) Manual.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Corsair/Explorer/Super Duty vehicles built on or before 27-May-2020 and not equipped with a 360-camera system may exhibit various rear parking aid camera concerns such as poor image quality, flickering and/or completely inoperative. If a vehicle exhibits any of these conditions, replace the rear parking aid camera. Refer to Workshop Manual (WSM), Section 413-13. For claiming, use causal part 19G490 and any applicable labor operations in Section 11 of the Service Labor Time Standards (SLTS) Manual
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-Super Duty vehicles may exhibit concerns related to brake drag. Utilize Workshop Manual (WSM) diagnostics in section 206-00 to verify the correct installation of the stoplamp switch. Improper adjustment of the stoplamp switch can cause the brake pedal assembly to lightly apply the brakes resulting in dragging condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 F-150, 2017-2020 F-Super Duty vehicles may exhibit one or more noisy doors when opening and closing. This may be due to dirt and debris on the door check arm(s). To correct this condition, follow the Service Procedure to clean and neutralize the affected door check arms.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 19-2026 to update the vehicle model years affected. Some 2000 and newer Ford/Lincoln/Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020 Transit, F-Super Duty, F-53 Motorhome/F-59 Commercial, 2021 F-650/F-750/E-series incomplete, chassis Cab, cutaway and stripped chassis vehicles equipped with a lane keeping or departure system are not calibrated from the factory to support final modifications. The final stage manufacturer is responsible for verifying that the lane keeping or departure system camera sensor is properly calibrated within Ford specifications once vehicles are completed. Calibrating the lane keeping or departure system utilizes the Ford scan tool to calibrate the front view camera. Refer to Workshop Manual (WSM) section 419-07. Do not submit a claim for this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Super Duty vehicles equipped with an 10R140 automatic transmission may exhibit an illuminated malfunction indicator lamp (MIL) and/or wrench light with diagnostic trouble codes (DTCs) P0715, P0716, P0717, P0718, P07BF and/or P07C0 stored in the powertrain control module (PCM). If any of these DTCs are set, focus diagnostics on the turbine shaft speed sensor (TSS) and/or TSS circuits. Refer to Workshop Manual (WSM), Section 307-01. Replacement of the ISSA or ISSB sensor will not correct this condition.
Source components: EQUIPMENT:ELECTRICAL · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020 Transit, F-Super Duty, F-53 Motorhome/F-59 Commercial, 2021 F-650/F-750/E-series incomplete, chassis Cab, cutaway and stripped chassis vehicles equipped with a lane keeping or departure system are not calibrated from the factory to support final modifications. The final stage manufacturer is responsible for verifying that the lane keeping or departure system camera sensor is properly calibrated within Ford specifications once vehicles are completed. Calibrating the lane keeping or departure system utilizes the Ford FDRS scan tool to calibrate the front view camera. Refer to Workshop Manual (WSM) section 419-07. Do not submit a claim for this condition.
Source components: ELECTRICAL SYSTEM · LANE DEPARTURE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020 Transit, F-Super Duty, F-53 Motorhome/F-59 Commercial, 2021 F-650/F-750/E-series incomplete, chassis Cab, cutaway and stripped chassis vehicles equipped with a lane keeping or departure system are not calibrated from the factory to support final modifications. The final stage manufacturer is responsible for verifying that the lane keeping or departure system camera sensor is properly calibrated within Ford specifications once vehicles are completed. Calibrating the lane keeping or departure system utilizes the Ford FDRS scan tool to calibrate the front view camera. Refer to Workshop Manual (WSM) section 419-01. Do not submit a claim for this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2016-2020 Ford and Lincoln vehicles equipped with a SYNC 3 Touchscreen may experience the volume control unresponsive from the Front Control Interface Module (FCIM) and steering volume controls when using Apple Car Play. When the Apple device is removed, volume control is restored. This is due to a concern with the Waze Navigation App software and Apple iOS version. To correct the condition, update the Waze App software and iOS to the latest version available and reboot the customer's Apple device. Perform an ignition cycle and reconnect the Apple device via USB. Open Apple Car Play and confirm volume control is restored. Installing/Updating third party software/applications is not warrantable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150 and F-Super Duty vehicles equipped with tailgate step assemblies may exhibit a step assembly that binds/will not open or opens/pops up while driving. This could be due to an incorrect adjustment of the step assembly. Before replacing any components for this concern, follow the Tailgate Step Adjustment procedure in Workshop Manual, Section 501-04, General Procedures.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with the Blind Spot Information System (BLIS) and Cross Traffic Alert (CTA) may require the removal of the factory equipped tail lamps to accommodate the use of aftermarket equipment. Once the tail lamps are removed, this may result in BLIS and CTA warning indicators illuminated in the instrument panel cluster (IPC). To clear these warning indicators, the BLIS and CTA systems will need to be disabled using the FDRS scan tool. Start a vehicle session in FDRS using the vehicles VIN and go to the toolbox tab. Locate the application labeled Disable/Enable Blind Spot Information System. Download and run this application to enable or disable the BLIS And CTA systems.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit the infotainment system stating in Michigan when trying to select a point of interest using the push to talk feature on the navigation system. Engineering is currently working on a solution for this condition, which is expected to be available in July. Please monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles built on or before 24-Feb-2020 may not have the instrument panel cluster (IPC) configured for operation with the Factory Invoiced Accessory (FIA) or as a Genuine Ford Accessory trailer tire pressure monitoring system (TPMS). The customer may indicate that they cannot monitor the trailer TPMS through the IPC when a configured trailer is connected. If the 'Trailer Tire Pressure' selection is not available in the IPC, the IPC will need to be reconfigured to make the Trailer Tire Pressure selection available. Using the latest version of the FDRS scan tool, reconfigure the IPC. For claiming use causal part 10849 and refer to Section 10 of the Service Labor Time Standards (SLTS) Manual.
Source components: ELECTRICAL SYSTEM · TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2012-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit an inoperative remote start with a 'Vehicle Failed To Start' message when using MyFord Mobile/Ford Pass/Lincoln Way mobile applications. The cellular cloud systems will only allow two remote start requests from the MyFord Mobile/Ford Pass/Lincoln Way apps without a vehicle drive event occurring. If a third remote start request is received, a Vehicle Failed To Start message will be displayed quickly in the mobile app. Once the vehicle is driven, the remote start counter is reset and will allow remote start commands to be sent from the mobile app. If the remote start system is not functioning using the key fob, refer to Workshop Manual (WSM) Section 303-06 for further diagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some of the affected vehicles may have a valve seat that is below the required retention force or not fully seated into one of the cylinder heads. A valve seat that is out of position may cause the illumination of the check engine light and may lead eventually to engine damage and potentially resulting in engine failure.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2018 C-Max, 2013-2020 Escape/Fusion/MKZ, 2015-2018 Focus,2015-2019 MKC, 2015-2020 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2020 F-Super Duty, 2018-2020 EcoSport/Expedition, 2019-2020 Ranger/Nautilus vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
Source components: SEATS · STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150/Expedition/Navigator/F-Super Duty vehicles built on 31-Aug-2018 and through 02-Feb-2020 may exhibit a water leak on the right front floor during and/or after the air conditioning (A/C) is used. This may be due to condensation from the evaporator drain tube entering the vehicle through the drain tube seal. To correct the condition, follow the Service Procedure steps to install an elbow on the evaporator drain tube to direct the condensation away from the seal.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-350, F-450, and F-550 F-Super Duty chassis cab vehicles equipped with a 6.7L diesel engine and 10R140 automatic transmission may exhibit a delay/bump feel when pulling away from a stop. This may be due to the neutral idle feature that automatically reduces the load on the engine when the vehicle stops, and the gear selector is in DRIVE to reduce fuel consumption and emissions. The transmission automatically resumes operation when the brake is released. The neutral idle feature activates when the transmission is sufficiently warmed, and the vehicle is on level grade. Do not attempt any repairs for this condition. Refer to Owners Manual Transmission Section for more information.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020 F-Super Duty vehicles equipped from the factory with an exterior backup alarm will also experience an interior chime when the vehicle is placed into the reverse position. This chime may come through the vehicles audio system or through the instrument cluster. This interior chime is characteristic to vehicles that are equipped with a factory exterior backup alarm and no repairs are recommended.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles may exhibit a condition where the turn signals flash fast after removal of the factory pick up box and tail lamps for flatbed installation. To prevent the turn signals from flashing fast, the BCM will need to be configured using the FDRS scan tool. Start a vehicle session in FDRS using the vehicles VIN and go to the toolbox tab. The BCM will have an application labeled Turn Signal Lamp Configuration. Download and run this application to configure the turn signals.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 6.2L or 7.3L gas engine and a 10R140 transmission may exhibit an intermittent buzz noise coming from the transmission while the vehicle is in transport mode. This condition is most noticeable with the vehicle in PARK or NEUTRAL and at elevated idle speeds of 850 to 1250 revolutions per minute (RPM). This condition is a normal characteristic while in transportation mode and will be eliminated once the vehicle is placed into normal mode prior to customer delivery. Do not attempt to repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may experience a notification in the FordPass and/or LincolnWay apps that indicates their vehicle has entered "deep sleep mode". This mode is enabled due to the vehicle not being started for 14 consecutive days or battery voltage is at/or below 9.5 volts. Some 2020 models will also set a warning if the telematic control unit (TCU) has received an automatic over the air update. The purpose of deep sleep mode is to conserve battery voltage. When deep sleep mode is enabled, the TCU is powered down and all communication with the FordPass and/or LincolnWay apps are disabled. To wake the vehicle from deep sleep mode, manually start the vehicle. More deep sleep mode information can be found in the FordPass or LincolnWay apps under: More > Guides > click in search entry box > type "deep sleep" and click on "Ask".
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles may exhibit a condition where the turn signals flash faster after removal of the factory pick up box and tail lamps for flatbed installation. Engineering is working to implement a solution for this condition. Advise the customer that a solution through FDRS is expected to be available 27-Apr-2020. Dealers are asked to follow-up with their customers to schedule a service appointment once the solution becomes available. Monitor OASIS for updates.
Source components: ELECTRICAL SYSTEM · EXTERIOR LIGHTING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with the Blind Spot Information System (BLIS) and Cross Traffic Alert (CTA) may require the removal of the factory equipped tail lamps to accommodate the use of aftermarket equipment. Once the tail lamps are removed, this may result in BLIS and CTA warning indicators illuminated in the instrument panel cluster (IPC). To clear these warning indicators, the BLIS and CTA systems will need to be disabled using the FDRS scan tool. Start a vehicle session in FDRS using the vehicles VIN and go to the toolbox tab. The BCM will have an application labeled Disable/Enable Blind Spot Information System. Download and run this application to enable or disable the BLIS And CTA systems.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 Transit vehicles equipped with a 3.2L engine, 2018-2020 F150 vehicles equipped with a 3.0L engine, 2017-2020 Super Duty vehicles equipped with a 6.7L engine built on or after 13-May-2017 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2002 stored in the powertrain control module (PCM). This may be due to a crack in the diesel particulate filter (DPF) substrate. To correct the condition, follow the Service Procedure steps to replace the DPF.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 6.2L/7.3L gas engine and 10R140 transmission built on or before 5-Dec-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P27B4 stored in the powertrain control module (PCM). This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 Transit vehicles equipped with a 3.2L engine, 2018-2019 F150 vehicles equipped with a 3.0L engine, 2017-2019 Super Duty vehicles equipped with a 6.7L engine built on or after 13-May-2017 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2002 stored in the powertrain control module (PCM). This may be due to a crack in the diesel particulate filter (DPF) substrate. To correct the condition, follow the Service Procedure steps to replace the DPF.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
Source components: ELECTRICAL SYSTEM · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48618 - 2020 Various Vehicles - Equipped With SYNC 3 - Unable To Schedule Remote Start Using Fordpass Or Lincolnway Applications Some 2020 Ford and Lincoln vehicles may exhibit a symptom of no ability to schedule a remote start event using the FordPass or Lincolnway app. If only the scheduling portion of the remote start system is missing from the mobile app or not functioning, please ensure the customer has installed the latest version of the Ford Pass or Lincoln Way app from the mobile phones app store. The customer may also need to log out of the Ford Pass or Lincoln Way app, and then log back in. If the remote start system is not functioning using the key fob and/or the on-demand remote start function from Ford Pass or Lincoln Way application, refer to Workshop Manual (WSM), Section 303-06 for further diagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 6.7L engine built on or before 5-Feb-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P203B, P2201 and/or DTC P27B4 stored in the powertrain control module (PCM). The vehicle may also exhibit a forced idle condition. This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48602 - 2020 F-Super Duty - Incorrect Or Missing Factory Invoiced Accessory (FIA) Trailer Camera Tire Pressure Monitoring System (TPMS) Kits Some 2020 F-Super Duty vehicles were shipped with incorrect FIA trailer camera/TPMS kits and some vehicles ordered with the Trailer TPMS only kit did not ship with the kit. The only accessory trailer kit which can be used on 2020 vehicles is the Trailer Camera only kit HC3J-1A515-CC. Do not attempt to install kits (HC3J-1A515-AC or BC) with trailer TPMS. Vehicles equipped with fifth wheel prep pack and Pro Trailer Backup Assist should install the provided trailer yaw sensor kit 14G551 and plug the yaw sensor wiring into the 12-way bed connector. The trailer camera only kit that shipped with the vehicle can be installed as it connects to the bumper mounted 7/12 trailer connector provided. Follow Super Duty Owners Manual Park Aid section to display trailer Auxiliary Camera view. Trailer TPMS only kit is still unavailable. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-Super Duty vehicles may exhibit a characteristic or abnormal steering wheel oscillation concern. The workshop manual (WSM) has been updated to provide diagnostic direction for both symptoms, refer to Section 211-03 Steering Linkage > Diagnosis and Testing > Symptom Chart. This message is only to provide awareness of this WSM update and does not supersede other published diagnostic direction.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48558 - 2017-2020 Various Vehicles Equipped With Telematics Control Unit (TCU) - Various FordPass/LincolnWay Mobile App Concerns Some 2017-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or no modem electronic serial number (ESN) displayed. To correct this condition prior to programming, remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48552 - 2020 Various Vehicles - Equipped With SYNC 3 - System Stating "In Michigan" When Using Push To Talk Navigation Some 2020 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit the infotainment system stating in Michiganwhen trying to select a point of interest using the push to talk feature on the navigation system. Engineering is currently working on a solution for this condition, which is expected to be available in May. Please monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48551 - 2020 Various Vehicles Equipped With SYNC 3 Various SYNC Performance Related Concerns Some 2020 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit various performance related concerns such as: intermittent frozen or blank screen, voice prompts with excessive pause between words, remote start not able to be scheduled from Ford Pass or Lincoln Way, Sirius Travel link not working properly, CarPlay not launching on connection or a black screen when connected. To correct this condition, check for SYNC software update on FDRS or Oasis under SYNC the section. If an update is available, refer to WSM section 415-00 to update the APIM software. If the problem persists after programming or no update is available, refer to WSM, Section 415-00 for diagnosis. For claiming, use causal part 14G371 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 6.7L engine built on or before 5-Feb-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P203B, P2201 and/or DTC P274B stored in the powertrain control module (PCM). This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 6.7L engine and 10R140 transmission and built on or before 15-Jan-2020 may exhibit harsh upshifts between 1st and 5th gears. This may be due to various strategies within the transmission control module (TCM) software. To correct the condition, follow the Service Procedure to reprogram the TCM.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:MANUAL TRANSMISSION:COLUMN SHIFT ASSEMBLY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48539 - 2017-2020 F-Super Duty/2018-2020 F-150 - 6.7L/3.0L - Diagnostic Trouble Code (DTC) P208E - Diesel Exhaust Fluid (DEF) Injector Testing Some 2017-2020 F-Super Duty/2018-2020 F-150 vehicles equipped with the 6.7L or 3.0L engines may exhibit an illuminated malfunction indicator lamp (MIL) with DTC P208E in the powertrain control module (PCM). When performing pinpoint test RK, the results of the selective catalyst reductant (SCR) dosing measurement test (RK7) may be zero or below the specified 40-50mL requirement due to urea crystals plugging the DEF injector nozzle. If the measurement is below this specified amount, perform pinpoint test step RK7 two additional times. If the specified amount is met, reinstall the reductant injector. If after three attempts the dosing measurement remains below the specified amount, the DEF injector should be replaced. The DEF pump should not be replaced for DTC P208E.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005-2020 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 F-150 and 2017-2020 F-Super Duty vehicles equipped with a rear defroster may have factory installed or service replacement rear glass that uses rear defroster electrical terminals with a plastic overmolded cover. The rear glass defroster terminals are not serviceable and should not be removed or detached from the glass during diagnosis or repairs. If the rear glass defroster terminals are separated from the glass, the rear glass assembly must be replaced.
Source components: ELECTRICAL SYSTEM · VISIBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) and diagnostic trouble code (DTC) P203B. If performing pinpoint test RJ in the Powertrain Control and Emission Diagnosis (PC/ED) does not identify an issue, do not attempt any repairs at this time. Engineering is currently investigating. Monitor OASIS for updates.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020 F-Super Duty vehicles equipped with a 10R140 automatic transmission at times may exhibit a normal skip shift upshifting and downshifting strategy. Typical examples are 1-3 or 3-5 upshift or a 6-4 coasting downshift. This is a normal characteristic and no repairs should be attempted for this condition. For more detailed information about the 10R140 skip gear shift strategy refer to the Workshop Manual (WSM), Section 307-01 > Diagnosis and Testing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 Ford and Lincoln vehicles may exhibit a symptom of no ability to schedule a remote start event using the FordPass or Lincolnway app. If only the scheduling portion of the remote start system is not functioning, no repair attempts should be made to correct this condition. If the remote start system is not functioning using the key fob and/or the on-demand remote start function from FordPass or Lincolnway application, refer to Workshop Manual (WSM), Section 303-06 for further diagnosis. Do not attempt repairs at this time. Engineering is currently investigating, monitor OASIS for updates.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with a 10R140 transmission may exhibit harsh upshifts between 1st and 5th gears. For vehicles with less than 200 miles (320 km) on the odometer, these harsh upshifts may be due to the transmission adaptive strategy not being fully adapted. The harsh upshifts are not detrimental to transmission operation or durability and upshift quality may improve as the vehicle is driven. If the vehicle does not have any illuminated warning indicators or diagnostic troubles codes (DTCs), do not perform any repairs at this time. Engineering is investigating. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 F-Super Duty vehicles equipped with power release tailgate may continue to display a Check Tailgate Ajar in the IPC message center after the tailgate is closed. This may occur when the key is in the ON position and the tailgate is opened and closed while the vehicle is in a gear other than PARK. Cycling the key or pressing the OK button on the steering wheel will remove the Check Tailgate Ajar message. This is normal operation of the system and no repair attempts should be made to correct a condition. If a customer complaint is received that the Check Tailgate Ajar message does not go away after closing the tailgate, verify and advise the customer of normal operating characteristic.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150/Expedition/Navigator/F-Super Duty vehicles may exhibit a water leak on the right front floor during or after the air conditioning (A/C) is used. This may be due to condensation from the evaporator drain tube entering the vehicle through the drain tube seal. To correct the condition, follow the Service Procedure steps to install an elbow on the evaporator drain tube to direct condensation away from the seal.