The vehicle dossier US · 2007
2007 Ford
F-250 SDProblems & recalls
54 distinct owner reports in the NHTSA snapshot. Suspension appears in 30 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 54 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 9 years with reports.
30,000 miles is the median among 52 reports with usable mileage. The middle half spans 10,000–46,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
3 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
EQUIPMENTCampaign 20E090000
Reported concern
Icon Vehicle Dynamics, LLC (Icon) is recalling all 05-UP FSD 2.5 Centerline Stabilizer Kits with part number 65050. The kits were sold as an accessory for certain 2005-2021 Ford F-250 4X4 and F-350 4X4 pickup trucks. The foam ring inside the stabilizer "through shaft" may block the piston ports, possibly causing the steering to lock up.
Manufacturer’s stated response
Icon will notify owners, and dealers will install a new shock assembly with a revised foam ring and steel support disc, free of charge. The recall began December 21, 2020. Owners may contact Icon customer service at 1-951-689-4266.
Read campaign 20E090000 at NHTSAEXTERIOR LIGHTING:BRAKE LIGHTSCampaign 11V352000
Reported concern
FORD IS RECALLING CERTAIN MODEL YEAR 2011 RANGER TRUCKS BUILT FROM JANUARY 25, 2011, THROUGH APRIL 25, 2011 AT THE TWIN CITIES ASSEMBLY PLANT, AND SERVICE PARTS DISTRIBUTED TO DEALERS FOR CERTAIN 2004 THROUGH 2011 MODEL YEAR RANGER TRUCKS, 2002 THROUGH 2005 MODEL YEAR EXCURSION VEHICLES, AND 2002 THROUGH 2007 MODEL YEAR F-250, F-350, F-450, AND F-550 TRUCKS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THE MULTI-FUNCTION SWITCH WAS SHIPPED WITH A SUBCOMPONENT (SLIDER) THAT MAY EXPERIENCE DEFORMATION. A MULTI-FUNCTION SWITCH WITH A DEFORMED SLIDER MAY MALFUNCTION CAUSING THE TURN SIGNAL, TAIL LIGHTS, HAZARD WARNING SIGNAL FLASHERS AND/OR BRAKE LIGHTS NOT TO ACTIVATE.
Manufacturer’s stated response
DEALERS WILL REPLACE THE SWITCHES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 15, 2011. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.
Manufacturer campaign: 11C18
Read campaign 11V352000 at NHTSAEQUIPMENTCampaign 08E026000
Reported concern
TRUXXX IS RECALLING 338 AFTERMARKET REPLACEMENT WELDED 3" LIFT BLOCKS FOR REAR SUSPENSIONS, PART NO. 206073, INCLUDED IN SUSPENSION KIT NOS. 108035 AND 108036, SOLD BETWEEN JULY 26, 2007 AND MARCH 4, 2008, FOR USE ON FORD MY 2005-2008 F-250 SUPERDUTY 4X4 LIGHT TRUCKS. COMPRESSIVE FORCES OF THE WELDED LIFT BLOCKS RESULTING FROM FORESEEABLE AND EXCESS VEHICLE PAYLOADS AS WELL AS OVER-TIGHTENING OF THE U-BOLTS DURING INSTALLATION MAY DISTORT THE BLOCKS, REDUCING THE INTENDED CLAMPING FORCE OF THE U-BOLTS.
Manufacturer’s stated response
TRUXXX WILL NOTIFY CUSTOMERS/INSTALLERS AND WILL REPLACE AFFECTED WELDED LIFT BLOCKS WITH EITHER NON-WELDED ALUMINUM OR CAST IRON BLOCKS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON OR ABOUT APRIL 16, 2008. OWNERS MAY CONTACT TRUXXX AT 1-800-381-8320.
Manufacturer campaign: 08-01BLK
Read campaign 08E026000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
42 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
SSM 51909When performing any transmission fluid changes or topoffs involving MERCON SP, MERCON LV has replaced all versions of MERCON SP and can be used going forward. Mixing MERCON LV and MERCON SP in the same transmission is acceptabl…NHTSA ID 10243490
When performing any transmission fluid changes or topoffs involving MERCON SP, MERCON LV has replaced all versions of MERCON SP and can be used going forward. Mixing MERCON LV and MERCON SP in the same transmission is acceptable. After 30-Jun-2023, MERCON SP ATF will no longer be manufactured and will only be available until inventory depletes.
Components: POWER TRAIN:AUTOMATIC TRANSMISSION. Confirm detailed applicability in the original document.
Source record 10243490 at NHTSASSM 49495Some 2005-2021 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shiel…NHTSA ID 10186678
Some 2005-2021 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10186678 at NHTSADOR-Z2E6B-08These SKUs are Trailer Brake Control Modules. The customer communication requested return of unsold inventory due to an internal software issue. The internal software issue leads to a false check trailer brake message and Trail…NHTSA ID 10178810
These SKUs are Trailer Brake Control Modules. The customer communication requested return of unsold inventory due to an internal software issue. The internal software issue leads to a false check trailer brake message and Trailer Brake Controller fault whenever the brake pedal is pressed. This will cause the part to be replaced, due to repetitive dashboard warning light, even though it sends signals to the trailer brakes properly.
Components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL · ELECTRICAL SYSTEM:SOFTWARE · TRAILER HITCHES. Confirm detailed applicability in the original document.
Source record 10178810 at NHTSASSM 48494Some 2005-2020 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shiel…NHTSA ID 10170992
Some 2005-2020 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
Components: SUSPENSION. Confirm detailed applicability in the original document.
Source record 10170992 at NHTSADOR-U2J7Y-02This SKU is a Spare Tire Hoist. Test results identified that the pull force parameter was not within specification, as a precautionary measure unsold inventory was requested to be returned for testing and containment. We don't …NHTSA ID 10171326
This SKU is a Spare Tire Hoist. Test results identified that the pull force parameter was not within specification, as a precautionary measure unsold inventory was requested to be returned for testing and containment. We don't have evidence that these test results have contributed to a product failure.
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10171326 at NHTSADOR-C2C6H-02This SKU is a Spare Tire Hoist. Test results identified that the pull force parameter was not within specification, as a precautionary measure unsold inventory was requested to be returned for testing and containment. We don't …NHTSA ID 10171325
This SKU is a Spare Tire Hoist. Test results identified that the pull force parameter was not within specification, as a precautionary measure unsold inventory was requested to be returned for testing and containment. We don't have evidence that these test results have contributed to a product failure.
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10171325 at NHTSASSM 48157Some 2002-2008 F-Super Duty, F-150 and Mark LT vehicles may exhibit concern during or after programing the VSM. The programming may fail or vehicle symptoms such as inoperative door locks, dome lamps, door ajar indicators or au…NHTSA ID 10165713
Some 2002-2008 F-Super Duty, F-150 and Mark LT vehicles may exhibit concern during or after programing the VSM. The programming may fail or vehicle symptoms such as inoperative door locks, dome lamps, door ajar indicators or auto lamps may occur after successful programing. To ensure the VSM is configured correctly, use the Integrated Diagnostic System (IDS) scan tool and select the blue ball and socket icon in the upper left corner. Select the utility knife in the bottom left corner. Select Update/Special Function and enter 53061 in the blue box then press the tick mark. The screen will go back to the system utilities page. Navigate to the toolbox tab and run the Programmable Module Installation (PMI) on the VSM. The procedure will prompt you to manually enter the as-built into the VSM. Obtain the as-built data from PTS > OASIS > As-Built.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10165713 at NHTSASSM 47979Some 2005-2019 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shiel…NHTSA ID 10160885
Some 2005-2019 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
Components: SUSPENSION · SUSPENSION:FRONT:WHEEL BEARING. Confirm detailed applicability in the original document.
Source record 10160885 at NHTSADOR-B8H4Z-11This SKU is a front upper ball joint. The Customer communication requested return of unsold inventory to inspect for ball studs with excessive rotational friction in the ball joint assembly. Excessive friction in the ball joint…NHTSA ID 10148818
This SKU is a front upper ball joint. The Customer communication requested return of unsold inventory to inspect for ball studs with excessive rotational friction in the ball joint assembly. Excessive friction in the ball joint assembly may cause a perceptible increase in steering effort.
Components: STEERING. Confirm detailed applicability in the original document.
Source record 10148818 at NHTSASSM 46345SOME 2005-2017 F-SUPER DUTY 4X4 VEHICLES OPERATED IN EXTREME DUST, MUD OR TAR SAND CONDITIONS MAY EXHIBIT ACCELERATED 4X4 VACUUM HUB SEAL AND OR WHEEL BEARING WEAR AS A RESULT OF HARSH OPERATING CONDITIONS. A KNUCKLE SEAL SHIEL…NHTSA ID 10095225
SOME 2005-2017 F-SUPER DUTY 4X4 VEHICLES OPERATED IN EXTREME DUST, MUD OR TAR SAND CONDITIONS MAY EXHIBIT ACCELERATED 4X4 VACUUM HUB SEAL AND OR WHEEL BEARING WEAR AS A RESULT OF HARSH OPERATING CONDITIONS. A KNUCKLE SEAL SHIELD KIT IS NOW AVAILABLE FOR CUSTOMER PURCHASE. THE KIT IS DESIGNED FOR SEVERE DUTY AND IS NON WARRANTABLE. THE KNUCKLE SEAL SHIELD KIT GC3Z-54024A38-A INCLUDES AN INSTRUCTION SHEET.
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10095225 at NHTSATSB150164Exterior Mirror - Tubular stainless steel west cpast style mirror - Loose mounting bracketNHTSA ID 10204983
Exterior Mirror - Tubular stainless steel west cpast style mirror - Loose mounting bracket
Components: VISIBILITY. Confirm detailed applicability in the original document.
Source record 10204983 at NHTSATSB-14-0114LINCOLN/FORD: WHEN DRIVING FROM IDLE UP TO 1200 RPM, THERE MAY BE AN INTERMITTENT RATTLE NOISE COMING FROM ENGINE. 2004-2013 F-150, F-250, F-350, EXPEDITION, MARK LT, NAVIGATOR. *PENHTSA ID 10056148
LINCOLN/FORD: WHEN DRIVING FROM IDLE UP TO 1200 RPM, THERE MAY BE AN INTERMITTENT RATTLE NOISE COMING FROM ENGINE. 2004-2013 F-150, F-250, F-350, EXPEDITION, MARK LT, NAVIGATOR. *PE
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 10056148 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
VIOLENT FRONT END OSCILLATIONEA08007
THIS INVESTIGATION WAS OPENED BASED ON 78 CONSUMER COMPLAINTS OF SEVERE SUSPENSION AND STEERING WHEEL OSCILLATIONS AFTER THE SUBJECT VEHICLES TRAVELED OVER AN UNEVEN SURFACE.ODI WAS CONCERNED ABOUT THESE COMPLAINTS BECAUSE MANY OF THEM ALLEGED LOSS OF CONTROL AND THE LOSS OF CONTROL OCCURREDAT SPEEDS ABOVE 50 MILES PER HOUR.AT THE TIME THESE COMPLAINTS WERE RECEIVED, ODI WAS ALSO AWARE OF THE TSB 07-10-10 AND EARLY WARNING FIELD REPORTS THAT DISCUSSED THE SHIMMY CONDITION ON THE SUBJECT VEHICLES.SINCE OPENING THIS INVESTIGATION, ODI HAS CONFIRMED, BASED ON CONSUMER COMPLAINTS, WARRANTY DATA, TESTING CONDUCTED BY VRTC, AND ODI INSPECTION OF COMPLAINT VEHICLES, THAT THE OWNERS OF THE SUBJECT VEHICLES ARE EXPERIENCING SHIMMY EVENTS ON THEIR VEHICLES.HOWEVER, ODI HAS ALSO CONFIRMED THAT OWNERS TYPICALLY DO NOT MAINTAIN THEIR TIRES AT THE PRESSURES RECOMMENDED BY FORD ON THE TIRE LABEL.FURTHER, ODI HAS FOUND THAT IN ORDER FOR SHIMMY TO OCCUR, TIRE PRESSURES MUST BE SUBSTANTIALLY BELOW (AT LEAST 20%) THOSE SPECIFIED ON THE VEHICLE TIRE LABEL.ODI CONSIDERS THESE UNSAFE TIRE CONDITIONS TO BE THE RESULT OF ONE OF THREE TYPICAL SITUATIONS.THE TIRES ARE BEING IMPROPERLY MAINTAINED, THE OWNERS ARE INTENTIONALLY SETTING THE TIRE PRESSURES LOW TO ENHANCE RIDE QUALITY, OR AFTERMARKET TIRES (NOT DESIGNED FOR USE ON THE VEHICLE) ARE INSTALLED TO CHANGE THE APPEARANCE OR FUNCTION OF THE VEHICLE.THE SUBJECT VEHICLES ARE INTENDED AND DESIGNED TO BE USED AS HEAVY DUTY VEHICLES AND AS SUCH REQUIRE THAT THE TIRES BE CAPABLE OF HANDLING THE LOADS FOR WHICH THE VEHICLE IS DESIGNED AND MARKETED.IN ORDER FOR THE TIRES TO BE CAPABLE OF HANDLING THESE LOADS, THE PROPER TIRE PRESSURE MUST BE MAINTAINED.IN LIGHT OF THE INFORMATION GATHERED IN THIS INVESTIGATION AND FORD'S AGREEMENT TO NOTIFY SUBJECT VEHICLE OWNERS (NOW AND EVERY TWO YEARS UNTIL THE VEHICLES REACH TEN YEARS FROM THEIR PRODUCTION DATE) ABOUT THE IMPORTANCE OF MAINTAINING PROPER TIRE PRESSURES ON THEIR VEHICLES, FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.FOR ADDITIONAL INFORMATION, SEE THE ATTACHED CLOSING REPORT.
Recorded closure: Mar 31, 2009
Find investigation EA08007VIOLENT FRONT END OSCILLATIONPE07057
ODI HAS RECEIVED 78 CONSUMER COMPLAINTS OF SEVERE SUSPENSION AND STEERING WHEEL SHIMMY AND OSCILLATIONS COMMENCING AFTER THE SUBJECT VEHICLES TRAVELED OVER AN UNEVEN ROAD SURFACE. THE MAJORITY OF THESE INCIDENTS OCCURRED AT SPEEDS OF 50 MPH OR GREATER.THIRTEEN OF THE COMPLAINTS RECEIVED BY ODI ALLEGE LOSS OF STEERING CONTROL AND THAT THE VEHICLE CHANGED DRIVING LANES UNCONTROLLABLY.FOUR OF THE COMPLAINTS RECEIVED BY ODI ALLEGE THAT THE VEHICLE LEFT THE ROAD SURFACE AS A RESULT OF THE VIOLENT SUSPENSION AND STEERING WHEEL OSCILLATIONS.IN ONE CASE THE CONSUMER ALLEGES THAT AFTER THE VEHICLE LEFT THE ROAD SURFACE, IT CRASHED INTO A WOODED AREA.ADDITIONALFACTORS CONTRIBUTING TO THE OPENING OF THIS EA WERE EARLY WARNING FIELD REPORTS,SUBMITTED BY FORD, DESCRIBING SUSPENSION SHIMMY / OSCILLATIONSAND A FORD TSB (07-10-10) DESCRIBING THE SUSPENSION SHIMMY ISSUE AND HOW TO REPAIR THE PROBLEM.FORD HAS DESCRIBED SHIMMY AS SELF-EXCITED OSCILLATION OF THE STEERING WHEELS WITH ACCOMPANYING WHEEL TRAMP.THIS PE HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS (EA) TO DETERMINE IF THE SHIMMY CONDITION THAT OCCURS ON THE SUBJECT VEHICLES CREATES A CONDITION WHERE THE VEHICLE BECOMES DIFFICULT TO CONTROL OR STARTLES THE DRIVER, THUS PRESENTING A SAFETY RISK.
Recorded closure: Mar 14, 2008
Find investigation PE07057Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.