2019 Ford F-150 Manufacturer communications & TSBs.Page 3
Original record summaries, dates and identifiers for this model-year. Records 201–300 of 331, ordered newest first. Dated records on this page: Feb 19, 2019–Jun 24, 2020.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Jun 24, 2020Service Bulletin/Repair Instructions
SSM 48935
NHTSA communication ID: 10176957
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 F-150/Ranger/Continental/Edge/Nautilus/Mustang/Fusion/MKZ vehicles may experience voice prompts that skip or have short pauses while directions are being provided. Engineering is currently working on a solution for this condition. Please inform customers that Ford is developing a software fix that is expected in early August. In the interim, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early August 2020. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150 vehicles equipped with a 2.7L EcoBoost engine may exhibit excessive white or blue smoke from the exhaust at start up after a cold soak. This may be due to oil entering the left side turbocharger turbine housing. To correct the condition, follow the Service Procedure steps to replace the left side turbocharger oil supply tube with a revised part.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 F-150/Ranger/Continental/Edge/Nautilus/Mustang/Fusion/MKZ vehicles may experience voice prompts that skip, hiccup or have short pauses while directions are being provided. No repairs should be made to attempt to correct this condition. Engineering is currently working on a solution for this condition. Please inform customers that Ford is developing a software fix that is expected in early August. Let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early to mid August 2020. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2016-2020 Ford and Lincoln vehicles equipped with a SYNC 3 Touchscreen may experience the volume control unresponsive from the Front Control Interface Module (FCIM) and steering volume controls when using Apple Car Play. When the Apple device is removed, volume control is restored. This is due to a concern with the Waze Navigation App software and Apple iOS version. To correct the condition, update the Waze App software and iOS to the latest version available and reboot the customer's Apple device. Perform an ignition cycle and reconnect the Apple device via USB. Open Apple Car Play and confirm volume control is restored. Installing/Updating third party software/applications is not warrantable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150 and F-Super Duty vehicles equipped with tailgate step assemblies may exhibit a step assembly that binds/will not open or opens/pops up while driving. This could be due to an incorrect adjustment of the step assembly. Before replacing any components for this concern, follow the Tailgate Step Adjustment procedure in Workshop Manual, Section 501-04, General Procedures.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019-2020 F-150 vehicles equipped with a 5.0L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0021 and/or P0022 stored in the powertrain control module (PCM). In addition to the DTCs, the vehicle may also exhibit noise near the front of the valve covers from the intake variable camshaft timing (VCT) phasers. To resolve this condition, replace only the VCT solenoid(s) associated with the DTCs present. If the condition persists after VCT solenoid replacement, continue with normal Powertrain Controls and Emissions Diagnosis (PC/ED) Manual diagnostics for any DTCs, and/or follow engine NVH diagnostics in Workshop Manual (WSM), Section 303-00. For claiming, use causal part 6B297 and applicable labor operations in the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2012-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit an inoperative remote start with a 'Vehicle Failed To Start' message when using MyFord Mobile/Ford Pass/Lincoln Way mobile applications. The cellular cloud systems will only allow two remote start requests from the MyFord Mobile/Ford Pass/Lincoln Way apps without a vehicle drive event occurring. If a third remote start request is received, a Vehicle Failed To Start message will be displayed quickly in the mobile app. Once the vehicle is driven, the remote start counter is reset and will allow remote start commands to be sent from the mobile app. If the remote start system is not functioning using the key fob, refer to Workshop Manual (WSM) Section 303-06 for further diagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2018 C-Max, 2013-2020 Escape/Fusion/MKZ, 2015-2018 Focus,2015-2019 MKC, 2015-2020 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2020 F-Super Duty, 2018-2020 EcoSport/Expedition, 2019-2020 Ranger/Nautilus vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
Source components: SEATS · STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150/Expedition/Navigator/F-Super Duty vehicles built on 31-Aug-2018 and through 02-Feb-2020 may exhibit a water leak on the right front floor during and/or after the air conditioning (A/C) is used. This may be due to condensation from the evaporator drain tube entering the vehicle through the drain tube seal. To correct the condition, follow the Service Procedure steps to install an elbow on the evaporator drain tube to direct the condensation away from the seal.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150 Raptor and 2019-2020 F-150 Limited vehicles equipped with a 3.5L EcoBoost High-Output engine may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. To correct the condition, follow the Service Procedure steps to reprogram the powertrain control module (PCM), and for vehicles built on or before 1-Apr-2019 that have not previously had both valve covers replaced perform an oil consumption test.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 19-2232 to update the vehicles affected. Some 2017-2019 F-150 and 2018-2019 Expedition vehicles built on or before 1-Apr-2019 and equipped with a 3.5L EcoBoost engine may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. This may be due to a concern with the positive crankcase ventilation (PCV) system. To correct the condition, follow the Service Procedure steps to verify the condition and replace the valve covers.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 Model year vehicles equipped with 3.3L, 3.5L EcoBoost, or 5.0L engines may exhibit stalling, lack of power, low fuel rail pressure and/or DTCs P0087 or P008A after a repair was made that required the removal of the fuel line that connects the high-pressure fuel pump to the port injection rail, such as injector replacements or base engine repairs. This line must be installed in the correct orientation as it has an internal one-way check valve. To determine if the fuel line has been installed improperly, look at the position of the Oetiker clamp (stainless band clamped around the black fuel line). The clamp holds the one-way check valve in place and should be located closest to the end connected to the port injection rail. If the clamp is not closest to the port injection rail, remove and reinstall the line in the proper orientation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 Model Year F-150 vehicles equipped with a 2.7L EcoBoost engine may experience an illuminated malfunction indicator lamp (MIL) with DTC P2196 and/or P2198 stored in the powertrain control module (PCM). Engineering is working to implement a solution for this condition. In the interim, clear the DTCs with the appropriate Ford scan tool and schedule a follow-up appointment with the customer for early July 2020. Advise the customer that a repair is expected to be available in June 2020 and that the condition has no effect on vehicle operation or long term durability.
Source components: ENGINE · EQUIPMENT · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may experience a notification in the FordPass and/or LincolnWay apps that indicates their vehicle has entered "deep sleep mode". This mode is enabled due to the vehicle not being started for 14 consecutive days or battery voltage is at/or below 9.5 volts. Some 2020 models will also set a warning if the telematic control unit (TCU) has received an automatic over the air update. The purpose of deep sleep mode is to conserve battery voltage. When deep sleep mode is enabled, the TCU is powered down and all communication with the FordPass and/or LincolnWay apps are disabled. To wake the vehicle from deep sleep mode, manually start the vehicle. More deep sleep mode information can be found in the FordPass or LincolnWay apps under: More > Guides > click in search entry box > type "deep sleep" and click on "Ask".
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48658 - 2019-2020 F-150 Raptor - Shock Absorber Solenoid Serviceable Separately From Shock Absorber 2019-2020 F-150 Raptor vehicles that require service of the shock absorber solenoid or wiring can be repaired with replacement of the solenoid separately from the shock absorber. The solenoid can be serviced without removing the shock from the vehicle. Refer to step 1 of the shock absorber installation procedure in the Workshop Manual (WSM), Section 204-01 and 204-02 for detailed solenoid installation information. Part Numbers: Right Front KL3Z-18B082-C, Left Front KL3Z-18B082-D, Right Rear KL3Z-18B084-C, Left Rear KL3Z-18B084-D.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 Transit vehicles equipped with a 3.2L engine, 2018-2020 F150 vehicles equipped with a 3.0L engine, 2017-2020 Super Duty vehicles equipped with a 6.7L engine built on or after 13-May-2017 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2002 stored in the powertrain control module (PCM). This may be due to a crack in the diesel particulate filter (DPF) substrate. To correct the condition, follow the Service Procedure steps to replace the DPF.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48630 - 2019-2020 F-150/Expedition/Navigator - Updated Diagnostic Procedure For The Intergrated Wheel End (IWE) System Some 2019-2020 F-150/Expedition/Navigator four wheel drive vehicles may exhibit a grinding/clicking/ratcheting noise from front axle area in 2H mode under acceleration or heavy loads. The WSM diagnostic routine for the IWE vacuum system has been updated with new leak specifications and a more efficient diagnostic process. Refer to Workshop Manual (WSM), Section 308-07A > Symptom Chart - NVH for the symptom Grinding/clicking/ratcheting noise from front axle in 2H mode under acceleration or heavy loads.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 Transit vehicles equipped with a 3.2L engine, 2018-2019 F150 vehicles equipped with a 3.0L engine, 2017-2019 Super Duty vehicles equipped with a 6.7L engine built on or after 13-May-2017 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2002 stored in the powertrain control module (PCM). This may be due to a crack in the diesel particulate filter (DPF) substrate. To correct the condition, follow the Service Procedure steps to replace the DPF.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
Source components: ELECTRICAL SYSTEM · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles built at Dearborn Truck Plant on 17-Jul-2017 and through 4-Aug-2019 or Kansas City Assembly Plant on 14-Aug-2017 and through 6-Aug-2019 equipped with a 3.5L EcoBoost engine, 3675 mm (145 in) wheelbase, XL/STX trim package, and max trailer tow package (towing pack 1) may exhibit a stability control, traction control and/or Advance Tracù warning message in the instrument panel cluster (IPC) message center with diagnostic trouble code (DTC) C0051:54 and/or C0051:64 stored in the anti-lock braking system (ABS) module. This maybe due to one or more software parameters in the ABS module. To correct the condition, follow the Service Procedure steps to reprogram the ABS module.
Source components: SERVICE BRAKES, AIR:ANTILOCK · TRACTION CONTROL SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150 vehicles equipped with a 5.0L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0172, P0173, P0174 and/or P0175. This may be due to incorrect flex fuel learning, which is often caused by customer refueling habits or a stuck open evaporative emissions purge valve. Refer to pinpoint test H in the Powertrain Control/Emissions Diagnosis (PC/ED) Manual for diagnostics and Flex Fuel GSB for additional flex fuel system information and diagnostic tips.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48563 - 2017-2020 F-150 - No Crank/No Start, Multiple Illuminated Warning Indicators And/Or DTCs Some 2017-2020 F-150 vehicles may exhibit a no crank/no start, auto start stop inoperative, illuminated malfunction indicator lamp (MIL) and/or powertrain malfunction indicator lamp, transmission shift concerns, diagnostic trouble codes (DTCs) P061A, U0140, U0401, U0101, U0074 and/or U0037 being set in the powertrain control module (PCM), transmission control module (TCM), instrument panel cluster (IPC), front controls interface module (FCIM), anti-lock braking system (ABS) module and/or power steering control module (PSCM). This may be due to the 15525 transmission wire harness not being properly secured. Visually inspect the harness for possible damage and proper routing at the rear of the engine down to the transmission. Repair as necessary. If no concerns are found, proceed with normal diagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48558 - 2017-2020 Various Vehicles Equipped With Telematics Control Unit (TCU) - Various FordPass/LincolnWay Mobile App Concerns Some 2017-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or no modem electronic serial number (ESN) displayed. To correct this condition prior to programming, remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 48539 - 2017-2020 F-Super Duty/2018-2020 F-150 - 6.7L/3.0L - Diagnostic Trouble Code (DTC) P208E - Diesel Exhaust Fluid (DEF) Injector Testing Some 2017-2020 F-Super Duty/2018-2020 F-150 vehicles equipped with the 6.7L or 3.0L engines may exhibit an illuminated malfunction indicator lamp (MIL) with DTC P208E in the powertrain control module (PCM). When performing pinpoint test RK, the results of the selective catalyst reductant (SCR) dosing measurement test (RK7) may be zero or below the specified 40-50mL requirement due to urea crystals plugging the DEF injector nozzle. If the measurement is below this specified amount, perform pinpoint test step RK7 two additional times. If the specified amount is met, reinstall the reductant injector. If after three attempts the dosing measurement remains below the specified amount, the DEF injector should be replaced. The DEF pump should not be replaced for DTC P208E.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This SKU is an Oil Dipstick. The customer communication requested return of unsold inventory to inspect the dipstick tube. The dipstick tube inner diameter may be small enough that it prevents installation of the OE dipstick.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-150 vehicles equipped with a 3.3L, 3.5L Duratec, 3.5L EcoBoost and 5.0L engine and equipped with a block heater built on or before 1-Jan-2019 may exhibit a lack of heat concern from the heating ventilation and air conditioning (HVAC) system when operating the vehicle consistently in temperatures that are below -20àâÂÂC (4àâÂÂF). This condition may be due to deposits from the engine coolant becoming trapped in the heater core. To correct the condition, flush the cooling system and replace the heater core.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 F-150 vehicles built on 1-Mar-2019 and through 31-Oct-2019 with rear axle tag code S-971-M may exhibit a clicking/ticking noise from the left rear of the vehicle while driving at low speeds. The click/ticking noise from the left rear axle wheel end may be caused by a wheel bearing bore surface that is not machined. If no metal contamination is present in the fluid, inspect the left side rear axle bearing bore for an unmachined surface in the 12:00 oclock to 3:00 oclock position. If an unmachined surface is found, replace the rear axle housing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 F-150 and 2017-2020 F-Super Duty vehicles equipped with a rear defroster may have factory installed or service replacement rear glass that uses rear defroster electrical terminals with a plastic overmolded cover. The rear glass defroster terminals are not serviceable and should not be removed or detached from the glass during diagnosis or repairs. If the rear glass defroster terminals are separated from the glass, the rear glass assembly must be replaced.
Source components: ELECTRICAL SYSTEM · VISIBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-150 and 2018-2020 Expedition/Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). The regulatory monitor for DTC P04DB is sensitive to crankcase system pressure concerns such as oil level indicator o-ring seal, incorrectly installed oil level indicator, crankcase hose, vacuum hose disconnects and oil fill cap o-rings. If root cause is unidentified after inspecting for loose or incorrectly installed crankcase pressure system components, perform Pinpoint Test HG in the Powertrain Control/Emissions Diagnosis (PC/ED) manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles built at Dearborn Truck Plant on 17-Jul-2017 and through 26-Jul-2019 or Kansas City Assembly Plant on 14-Aug-2017 and through 28-Jul-2019 equipped with a 3.5L EcoBoost engine, 3675 mm (145 in) wheelbase, XL/STX trim package, and max trailer tow package (towing pack 1) may exhibit a stability control, traction control and/or Advance Tracù warning message in the instrument panel cluster (IPC) message center with diagnostic trouble code (DTC) C0051:54 and/or C0051:64 stored in the anti-lock braking system (ABS) module. This maybe due to one or more software parameters in the ABS module. To correct the condition, follow the Service Procedure steps to reprogram the ABS module.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-150, 2015-2020 Explorer, 2017-2019 F-Super Duty, 2017-2020 Continental, 2018-2020 Expedition/Navigator, 2016-2018 MKX, 2019-2020 Nautilus, 2020 Aviator/Corsair and 2013-2020 MKZ vehicles equipped with multi-contour seats may exhibit intermittent multi-contour seat operation and/or massage and lumbar adjust inoperative from the seat switch or SYNC screen with or without diagnostic trouble code (DTC) B1471, U024B, and/or U024C. This may be due to terminal fretting at the connector for the driver multi-contour seat module (SCMG) and passenger multi-contour seat module (SCMH). To correct the condition, follow the Service Procedure steps to replace the connectors and reroute the harness.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-150 vehicles equipped with a 3.5L EcoBoost engine, 2018-2020 F-150 vehicles equipped with a 2.7L EcoBoost or 5.0L engine, 2019-2020 F-150 vehicles equipped with a 3.0L engine, and an externally controlled variable displacement compressor (EVDC) may exhibit a high pitched squeal or whistle type noise from the engine compartment after the engine is shut off. This condition may be due to the air conditioning (A/C) low side system pressure exceeding the high side pressure resulting in equalization of A/C system pressures through the EVDC A/C compressor. This noise is not detrimental to system operation or durability. Do not attempt diagnosis or repairs for this condition at this time. Engineering is investigating, monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-150, 2017-2019 F-Super Duty, 2018-2019 Expedition/Navigator vehicles may exhibit a rattle and/or squeak noise from the vista roof opening panel while driving with the roof opening panel closed. This may be due to dirt and/or debris build up between the vista roof opening panel seal and the body. To correct the condition, follow the Service Procedure steps to clean and lubricate the vista roof opening panel seal.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150 vehicles equipped with a 5.0L engine may exhibit excessive oil consumption of greater than 1L (1 quart) in 4,800 km (3,000 mi) with no visible oil leaks. This may be due to high intake manifold vacuum during some deceleration fuel shut off (DFSO) events resulting in oil being pulled into the combustion chamber from the crankcase, valve guides, and positive crankcase ventilation (PCV). To correct the condition, follow the Service Procedure steps to reprogram the powertrain control module (PCM), install a new engine oil level indicator and change the engine oil and oil filter. The revised PCM calibration reduces engine vacuum during some DFSO events.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles equipped with a 5.0L engine built on or before 12-Feb-2019 may exhibit a metallic grinding/rattling sound coming from the transmission bellhousing area under various operating conditions. This may be due to the torque converter studs contacting the engine to transmission spacer plate. To correct the condition, follow the Service Procedure steps to replace the engine to transmission spacer plate with a new engine to transmission spacer plate that includes a bend for additional clearance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150/Expedition/Navigator/F-Super Duty vehicles may exhibit a water leak on the right front floor during or after the air conditioning (A/C) is used. This may be due to condensation from the evaporator drain tube entering the vehicle through the drain tube seal. To correct the condition, follow the Service Procedure steps to install an elbow on the evaporator drain tube to direct condensation away from the seal.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 F150, Ranger, Continental, Edge, Nautilus, Mustang, Fusion or MKZ may experience voice prompts that skip, hiccup or have short pauses while directions are being provided. No repairs should be made to attempt to correct this condition. Engineering is currently investigating the concern. Monitor Oasis for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 19-2285 to update the vehicle model years affected and Service Procedure. Some 2015-2020 F-150 vehicles may exhibit a glove compartment door that is difficult to latch on one or both sides or appears misaligned along the storage tray or right side instrument panel when closed. This may be due to the position of the glove compartment storage tray rubber mat or the seating of the glove compartment door strikers or glove compartment door hinge pins. To correct the condition, follow the Service Procedure steps to reposition or adjust the affected component.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-150 vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated MIL with DTC P04DB stored in the powertrain control module (PCM). Regulatory monitor for DTC P04DB is sensitive to crankcase system pressure concerns such as oil level indicator o-ring seal, incorrectly installed oil level indicator, crankcase hose, vacuum hose disconnects and oil fill cap o-rings. If root cause is unidentified after inspection for loose, incorrectly installed crankcase pressure system concerns, perform Pinpoint Test HG.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 19-2133 to update the vehicle model years affected, Service Procedure and Parts List. Some 2018-2019 F-150 vehicles equipped with a 5.0L engine may exhibit excessive oil consumption with no visible oil leaks.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or no modem electronic serial number (ESN) displayed. To correct this condition prior to programming, remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 Ford and Lincoln vehicles equipped with a telematics control unit (TCU) may exhibit a persistent message in the Ford Pass/Lincoln Way mobile app advising, Your vehicles software is being updated. Vehicle controls will be unavailable for about 10 minutes while this update takes place. This may be due to the TCU still in factory mode. Using the appropriate Ford diagnostic scan tool, check the TCU_AUTHSTATE PID status showing Factory Mode. To correct this condition, perform programmable module installation (PMI) on the telematics control unit (TCU). Once PMI is completed, ensure the TCU_AUTHSTATE PID in service tool no longer displays Factory Mode. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM) section 415-00. For claiming, use causal part 14G229.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition prior to programing remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition prior to programming, remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 19-2206 to update the Title, Issue Statement and Service Procedure. Some 2015-2019 F-150 vehicles may exhibit a glove compartment door that is difficult to latch on one or both sides or appears misaligned along the storage tray or right side instrument panel when closed. This may be due to the position of the glove compartment storage tray rubber mat or the seating of the glove compartment door strikers or glove compartment door hinge pins. To correct the condition, follow the Service Procedure steps to reposition or adjust the affected component. Follow the Service Procedure steps to correct the condition on vehicles that meet all of the following criteria: * 2015-2019 F-150 * Glove compartment door is difficult to latch on one or both sides or appears misaligned
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-150/Explorer, 2017-2019 F-Super Duty/Continental, 2018-2019 Expedition/Navigator, 2016-2018 MKX, 2019 Nautilus, and 2013-2019 MKZ vehicles equipped with Multi-Contour seats may exhibit intermittent multi-contour seat operation and/or massage and lumbar adjust inoperative from the seat switch or SYNC screen with or without diagnostic trouble code (DTC) B1471, U024B, and/or U024C. This may be due to terminal fretting at the connector for the driver multi-contour seat module (SCMG) and passenger multi-contour seat module (SCMH). To correct the condition, follow the Service Procedure steps to replace the connectors and reroute the harness.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 F-150 Limited vehicles built on or before 1-Jun-2019 equipped with a 3.5L EcoBoost high output engine may exhibit a lack of power and/or misfire condition with or without diagnostic trouble code (DTC) P0300 through P0306. This may be due to the internal components of the muffler assembled improperly. To correct the condition, follow the Service Procedure steps to replace the muffler.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 Mustang, Continental, Fusion, MKZ, F150, Transit Connect, Ranger, Edge or Nautilus with SYNC 3 may have the following intermittent symptoms: a solid blue screen when moving forward at speeds above 16 kph (10 mph), the rear view camera remains on the screen at speeds below 16 kph (10 mph), or inoperative infotainment applications. This may be due to the SYNC 3 software version installed on the vehicle. To correct the condition, follow the Service Procedure steps to reprogram the accessory protocol interface module (APIM).
Source components: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA · ELECTRICAL SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles equipped with a 5.0L engine built on or before 12-Feb-2019 may exhibit a rattling sound coming from the transmission bellhousing area. This may be due to the torque converter studs contacting the engine to transmission spacer plate. To correct the condition, follow the Service Procedure steps to replace the engine to transmission spacer plate with a new engine to transmission spacer plate that includes a bend for additional clearance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 F-150 vehicles equipped with a 2.7L EcoBoost engine built on before 14-Aug-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). This may be due to a strategy within the PCM software. To correct the condition, follow the Service Procedure to update the PCM calibration.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles equipped with a 2.7L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0471 stored in the powertrain control module (PCM). This may be due to the exhaust pressure sensor. To correct the condition, follow the Service Procedure to replace the exhaust pressure sensor.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2020 vehicles equipped with an EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function. To support the proper diagnosis of this compressor, the EVDC control valve tester has been provided to each U.S. dealership (339-EVDC100). Ensure the A/C system has a full charge prior to any compressor diagnostics. To support the proper diagnosis of this compressor, the EVDC compressor tool must be used, and the results recorded in the Technician comments field with the warranty claim. This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2019 F-150 Raptor vehicles that require service of the shock absorber solenoid or wiring can be repaired with replacement of the solenoid separately from the shock absorber. The solenoid can be serviced without removing of the shock from the vehicle. Refer to step 1 of the shock absorber installation procedure in the Workshop Manual (WSM), Section 204-01 and 204-02 for detailed solenoid installation information. Part Numbers: Right Front KL3Z-18B082-A, Left Front KL3Z-18B082-B, Right Rear KL3Z-18B084-A, Left Rear KL3Z-18B084-B.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles equipped with a 3.0L diesel engine may exhibit fuel spit back, a stuck fuel nozzle and/or damaged fuel tank filler pipe. This may be due to some fuel stations using larger than standard filler nozzle sizes. The F-150 fuel tank filler pipe has been designed for use with a standard automotive diesel nozzle which is 23.6 mm (0.929 inch) to 25.5 mm (1.004 inch) in diameter. The fuel filler pipe is not compatible with larger diameter or commercial style fuel filler nozzles used by some fuel stations. Fuel spit back, slow fill, stuck fuel nozzles, or damage resulting from larger diameter fuel nozzles is not a warrantable defect. Do not submit a claim for this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles equipped with a 2.7L EcoBoost engine built on or before 21-May-2019 may exhibit an oil leak from the engine oil pan RTV seal. To correct the condition, follow the Service Procedure steps to replace the oil pan with a new oil pan equipped with a press-in-place gasket.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the appropriate Ford diagnostic scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the body control module (BCM) is internally damaged and requires replacement. The BCM should only be replaced for this condition when the 232 key table error message is present. If the 232 key table error is not present, follow normal diagnostics for the no crank condition. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-150 and 2018-2019 Expedition/Navigator vehicles built on or before 1-Apr-2019 and equipped with a 3.5L EcoBoost engine may exhibit excessive oil consumption with no visible oil leaks with or without diagnostic trouble code (DTC) P0365 and/or P0369. This may be due to a concern with the positive crankcase ventilation (PCV) system. To correct the condition, follow the Service Procedure steps to verify the condition and replace the valve covers.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV).
NHTSA source summary · Original PDF not reviewed by Recallfolio
2019 F-150/Expedition/Navigator vehicles equipped with four-wheel drive (4WD) have a revised transfer case control module (TCCM) strategy that will affect integrated wheel end (IWE) operation after initial start up. The TCCM will not energize the solenoid to supply vacuum to the IWEs after the initial key cycle and a driven gear is selected. The IWEs will remain engaged for 0.8 km (0.5 mi) when the temperature is above 0Ã âC (32Ã âF) and 3 km (2 mi) when below 0Ã âC (32Ã âF). The strategy changes were implemented to improve vacuum supply management and axle warm up in cold temperatures. The engine must run for a minimum of 5 minutes to build sufficient vacuum before performing any vacuum related testing. Refer to the Workshop Manual (WSM) Section, 307-08A - Four-Wheel Drive Systems - System Operation and Component Description for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 F-150/Expedition/Navigator vehicles equipped with a 3.5L/2.7L EcoBoost engine and four-wheel drive (4WD) may exhibit an intermittent grinding type noise while driving in two-wheel drive (2WD), most commonly on acceleration. This noise could appear to be turbocharger related. After engineering analysis of returned turbochargers that have been replaced for this condition, no concerns were identified with the turbochargers. The grinding type noise may be related to the 4WD system integrated wheel ends (IWE). To aid in diagnosis, shift the vehicle to 4WD and attempt to verify the condition. If the grinding noise no longer occurs with the vehicle in 4WD a IWE vacuum system and/or mechanical fault may be present.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-150 vehicles may exhibit a glove compartment door that appears misaligned along the storage tray or right side instrument panel when closed. This may be due to the position of the glove compartment storage tray rubber mat or the seating of the glove compartment door strikers or glove compartment door hinge pins. To resolve the condition, follow the Service Procedure steps to reposition or adjust the affected component.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Satisfaction Program 19B15: Certain 2019 Model Year F150, Expedition, Navigator and Transit Vehicles Equipped with a 3.5L EcoBoost Engine - Cam Cover Torque
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150, Expedition, and Navigator vehicles may exhibit a concern of inoperative adaptive cruise control with no associated diagnostic trouble code (DTC). This concern may occur if the hot in run or start switched power is not present at the anti-lock brake system (ABS) module on circuit CBB17. A load test is recommended to test the ABS module power and ground circuits.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL · SERVICE BRAKES, HYDRAULIC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles built on 23-Sep-2018 and through 28-Mar-2019 and 2019 Edge/Nautilus/Continental/MKZ vehicles built on 4-Dec-2018 and through 29-Mar-2019 and Fusion vehicles built on 16-Jan-2019 and through 12-Apr-2019 equipped with a 2.7L/3.0L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). This may be due to the incorrect positive crankcase ventilation (PCV) valve installed. If the PCV valve is brown in color, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) Manual for normal diagnostics. If the PCV valve is gray in color, replace the PCV valve, clear the DTC, and retest. If the DTC returns, refer to the PC/ED for normal diagnostics.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles equipped with a 5.0L engine and built on or before 12-Feb-2019 may exhibit a rattling sound coming from the transmission bellhousing area. This may be due to the torque converter studs contacting the engine to transmission spacer plate. Follow the procedure to correct the condition.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-150 vehicles may exhibit a rattle and/or squeak noise from the vista roof opening panel while driving with the roof opening panel closed. This may be due to dirt and/or debris build up between the vista roof opening panel seal and the body. To correct the condition, follow the Service Procedure steps to clean and lubricate the vista roof opening panel seal.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-150 vehicles equipped with a 3.3L, 3.5L Duratec, 3.5L EcoBoost and 5.0L engine without a block heater built on or before 1-Jan-2019 may exhibit a lack of heat concern from the heating ventilation and air conditioning (HVAC) system when operating the vehicle in temperatures consistently below -20àâÂÂC (4àâÂÂF). This condition may be due to deposits from the engine coolant becoming trapped in the heater core. To correct the condition, flush the cooling system and replace the heater core. Follow the Service Procedure steps to correct the condition.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-150 vehicles equipped with a 3.3L, 3.5L Duratec, 3.5L EcoBoost and 5.0L engine and equipped with a block heater built on or before 1-Jan-2019 may exhibit a lack of heat concern from the heating ventilation and air conditioning (HVAC) system when operating the vehicle consistently in temperatures that are below -20àâÂÂC (4àâÂÂF). This condition may be due to deposits from the engine coolant becoming trapped in the heater core. To correct the condition, flush the cooling system and replace the heater core. Follow the Service Procedure steps to correct the condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-150 and 2018-2019 Expedition/Navigator vehicles equipped with a 3.5L EcoBoost engine built on or before 1-Apr-2019 may exhibit excessive oil consumption with or without diagnostic trouble code (DTC) P0365 and/or P0369. If there are no visible external oil leaks, replace both valve covers. Refer to Workshop Manual, Section 303-01. For claiming, use causal part 6582 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 and Mustang vehicles equipped with a 5.0L engine may exhibit a light to moderate knocking type noise at idle (600-700 RPM) that is sometimes described as a quiet diesel type sound. The noise is usually more prominent on the passenger side of the vehicle toward the rear of the engine. As the engine comes up to operating temperature, the noise level increases slightly. This noise is not detrimental to engine function and has no short or long term effects on engine durability. This an operating characteristic of the 5.0L engine and no repairs should be attempted. Refer to the Service Procedure
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 and Mustang vehicles equipped with a 5.0L engine built on or before 30-Apr-2019 may exhibit a chirping type noise from the upper engine front cover area at warm or hot idle. This noise may sound similar to a front engine accessory drive (FEAD) chirp noise. This may be due to the primary timing chain tensioner oil pressure relief valve. To correct the condition, replace the primary timing chain tensioners. Follow the Service Procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F150, Expedition, and Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0365 and/or P0369 stored in the powertrain control module (PCM). This may be due to low engine oil level, low engine oil pressure, or worn/damaged variable camshaft timing (VCT) units. Before performing Powertrain Control and Emissions Diagnosis (PC/ED) Manual diagnostics, inspect the engine oil level and evaluate any abnormal VCT noise conditions. If engine oil level is correct and no unusual engine noises are present, proceed with normal diagnostics per PC/ED pinpoint test (PPT) DR.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles equipped with a 3.5L EcoBoost or 2.7L EcoBoost engine and some 2018-2019 Expedition and Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04F0 and/or P144C stored in the powertrain control module (PCM). This may be due to loose or partially connected evaporative emissions (EVAP) vapor lines. Before completing the Powertrain Control/Emissions Diagnosis (PC/ED) Manual pinpoint test (PPT) HX follow the Service Procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 47926 - 2018-2019 F-150/Expedition/Navigator/Transit/Explorer - Illuminated MalfunctionIndicator Lamp (MIL) With Diagnostic Trouble Code (DTC) P025A Some 2018-2019 F-150, Expedition, Navigator, Transit and Explorer vehicles may exhibit an illuminated MIL with DTC P025A stored in the powertrain control module (PCM). This may be due to an intermittent or partial disconnect of the harnessto the fuel pump driver module (FPDM) connector. Confirm FPDM connector (F-150 C4336, Expedition/Navigator C433, Transit C433, Explorer C3239) is fully seated prior to performing PC/ED diagnostics or replacing any components. APPLICABLE VEHICLES
Source components: ELECTRICAL SYSTEM · FUEL SYSTEM, GASOLINE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 47925 - 2019 Various Vehicles - SYNC 3 - Infotainment Screen Concerns, Wi-Fi ConnectionMessage, Rear View Camera Operation Some 2019 vehicles equipped with SYNC 3 may have the following intermittent symptoms: a Wi-Fi connection pop up every key cycle, frozen unresponsive screen, a solid blue screen when moving forward at speeds above 10 mph, the rear view camera remains on the screen at speeds below 10 mph, or poor App performance. To resolve this concern, check for a SYNC software update under the OASIS Tab SYNC selection. If an update is available, update the APIM software per Workshop Manual (WSM), Section 415-00. Follow the onscreen instructions provided by the programming process. To verify success after programming, turn the key off with the dooropen for 5 minutes. Perform this SYNC programming before taking any other repair steps. For claiming, use causal part 14G371 and applicable labor operations inSection 10 of the SLTS manual. APPLICABLE VEHICLES
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 47930 - 2019 - Continental/F-150/Ranger/ - SYNC 3 With Navigation - Travel Link Data Missing Some 2019 Continental, F-150, and Ranger vehicles may experience some of the Travel Link data missing when selecting the SiriusXM Travel Link app from the appsmenu. Data related to traffic list, movie listings, sports info, fuel prices, weather, and or ski conditions may not appear when selected. To resolve this concern, using the vehicles touch screen, perform a SYNC Master Reset by selecting settings > general > Master Reset. Note: performing a Master Reset will disassociate the customerâÂÂs phone from the Bluetooth and SYNC connect features if equipped.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 47922 - Various Vehicles - 2.7L/3.0L EcoBoost Engine - Oil Filter Service Tip When servicing the oil filter on vehicles equipped with a 2.7L or 3.0L EcoBoostengine it is critical to inspect the oil filter housing center stem to verify is not separated or damaged. If the center stem is damaged or separated from the housing this will result in oil flow through the reservoir drain port causing low engine oil pressure and internal engine damage. If the filter housing stem is damaged or separated, the oil filter housing must be replaced. If the center stem is not damaged or separated, the O-ring seals on the stem and housing must be replaced each time the filter is serviced.
Source components: ENGINE · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2015 - 2019 Model Year F-150 and 2017 â 2019 Model Year F-Super Duty Vehicles Equipped with Engine Block Heaters - Engine Block Heater Cord Replacement
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 Mustang and F-150 vehicles built on or before 8-Jan-2019 and equipped with a 5.0L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P1289 and/or P017D stored in the powertrain control module (PCM). This may be due to cylinder head temperature (CHT) sensor. To resolve the condition, replace the CHT sensor.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 47911 - 2018-2019 F-150/Mustang - 5.0L - Chirping Noise From Engine Compartment At Idle Some 2018-2019 F-150 and Mustang vehicles equipped with a 5.0L engine may exhibit a chirping type noise from the upper right side of the engine at a warm or hot idle. This noise may sound similar to a front engine accessory drive (FEAD) chirp noise. If the noise persists with the FEAD belt removed and is isolated to the front cover area, this noise may be due to the primary timing chain tensioner. This noise will not result in any engine durability concerns. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 47903 - 2018-2019 F-150/F-Super Duty/Transit - Rear Axle Pinion Seal Fluid Leak/Seepage Some 2018-2019 F-150, F-Super Duty, and Transit vehicles may exhibit the appearance of a fluid leak or seepage from the rear axle pinion seal. The appearance of a fluid leak or seepage on a vehicle with less than 500 miles or less than 3 months in service may not be due to a failed rear axle pinion seal. The appearance of fluid around the seal may be from the axle assembly being shipped to the vehicle assembly plant with the pinion facing down. To determine if a leak is present, clean the seal area of any residual lubricant and visually inspect the pinion seal for leaks or damage in the seal contact area or dust slinger on the pinion flange dust shield. If no concerns are found, run the vehicle on a hoist in DRIVE at idle speeds for 10 minutes to allow the fluid to circulate and recheck for signs of leakage.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles equipped with a 5.0L engine and built on or before 12-Feb-2019 may exhibit a rattling sound coming from the transmission bellhousing area. This may be due to the torque converter studs contacting the engine to transmission spacer plate. To resolve this concern, replace the engine to transmission spacer plate with a new engine to transmission spacer plate that includes a bend for additional clearance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles built at Kansas City Assembly Plant on 4-Apr-2018 and through 4-Mar-2019 and Dearborn Truck Plant on 13-Apr-2018 and through 26-Feb-2019 and some F-Super Duty vehicles built at Kentucky Truck Plant on 22-Apr-2018 and through 5-Mar-2019 and Ohio Assembly Plant on 18-Apr-2018 and through 11-Mar-2019 may exhibit doors that are difficult to unlatch or latch in cold or below freezing temperatures. This may be due to water entering the doors causing door latching components to freeze. To correct the condition, install the service kit.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 F-150 vehicles equipped with a 5.0L engine may exhibit a chirping type noise from the upper right side of the engine at a warm or hot idle. This noise may sound similar to a front engine accessory drive (FEAD) chirp noise. If the noise persists with the FEAD belt removed and is isolated to the front cover area, this noise may be due to the primary timing chain tensioner. This noise will not result in any engine durability concerns. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-150 vehicles may exhibit a glove box door that appears misaligned along the storage tray or right side instrument panel when closed. This may be due to the position of the glove box storage tray rubber mat or the seating of the glove box door strikers or glove box door hinge pins. To resolve the condition, reposition or adjust the affected component according to the Service Procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 Mustang, Continental, Fusion, MKZ, F150, Transit Connect, Ranger, Edge or Nautilus with SYNC 3 may have the following intermittent symptoms: a solid blue screen when moving forward at speeds above 10 mph, the rear view camera remains on the screen at speeds below 10 mph, or inoperative infotainment applications. To resolve this concern, check for a SYNC software update under the OASIS Tab SYNC selection. If an update is available, update the APIM software per WSM section 415-00. After the complete pop-up appears, remove the USB flash drive and install it into the IDS tool to update the Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes, which is critical for a successful installation. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 Mustang/Fusion/Edge/F-150/Continental/MKZ/Nautilus/Ranger vehicles with SYNC 3 may show a pop-up message every key cycle that states Network Connection Needed - To complete the system updates your vehicle should connect to a Wi-Fi network or through the FordPass/LincolnWay app. Until the update is completed, some features may not be available. Would you like to attempt to connect to a Wi-Fi network now? This message may occur, even if SYNC has been connected to a trusted Wi-Fi source. To temporarily remove the inconvenience of this pop-up message, advise the customer from SYNC to select Settings > Automatic Updates > System Wi-Fi and turn off System Wi-Fi, then turn off automatic system updates. Engineering is investigating, monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition prior to programing remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition prior to programing remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2016-2019 Explorer, 2016-2018 MKX, 2019 Edge/Nautilus, 2017-2019 Fusion/MKZ, and 2018-2019 F-150/Mustang/Expedition/Navigator vehicles equipped with climate controlled seats may exhibit a buzzing noise from the front seats, front seats too warm, and/or inoperative climate controlled front seats. DTCs B14BA:13, B1154:4B, and/or B14B9:13 may also be present. This may be due to loose terminal pin fit on the driver seat module (DSM) connector C341D (16 pin). If a loose terminal pin fit condition is found during normal diagnostics per Workshop Manual (WSM), Section 501-10, a new service pigtail connector (part number 3U2Z-14S411-BRAB) is available. Refer to Wiring Diagram, Cell 119 to make sure C341D is a 16 pin connector and not a 20 pin connector. Refer to Wiring Diagram, Cell 5 for the recommended splicing procedures.
Source components: ELECTRICAL SYSTEM · SEATS · SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-150, 2018-2019 Expedition/Navigator/Mustang, 2019 Ranger vehicles equipped with a 10R80 transmission may exhibit a whine noise. This may occur at idle and while driving coming from the bell housing and front pan area of the transmission. The whine noise may become louder when at operating temperature and increases with higher engine RPM in the PARK position. A small amount of whine noise is considered to be characteristic of the 10R80 transmission due to the offset gear drivetrain in the front support and has no effect on durability.