2008 Ford ESCAPE HYBRID Manufacturer communications & TSBs.Page 1
Original record summaries, dates and identifiers for this model-year. Records 1–6 of 6, ordered newest first. Dated records on this page: Jun 1, 2009–Sep 8, 2016.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Sep 8, 2016Service Bulletin/Repair Instructions
TSB 16-0118
NHTSA communication ID: 10109036
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005-2012 Escape Hybrid and 2006-2011 Mariner Hybrid vehicles may set DTCs P0A81 (battery pack cooling fan 1 control circuit) and/or P0A96 (battery pack cooling fan 2 control circuit) in the traction battery control module (TBCM). These codes by themselves normally do not result in any symptoms that are noticeable to the customer. DTCs P0A81/P0A96 are typically found when diagnosing other drivability concerns. Follow the Service Procedure steps to correct the condition.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD/MERCURY: SOME VEHICLES MAY SET DIAGNOSTIC TROUBLE CODES (DTCS) P0A81 (BATTERY PACK COOLING FAN 1 CONTROL CIRCUIT) AND/OR P0A96 (BATTERY PACK COOLING FAN 2 CONTROL CIRCUIT) IN THE TRACTION BATTERY CONTROL MODULE (TBCM). THESE CODES BY THEMSELVES NORMALLY DO NOT RESULT IN ANY SYMPTOMS THAT ARE NOTICEABLE TO THE CUSTOMER. REPLACE BOTH HIGH VOLTAGE TRACTION BATTERY (HVTB) COOLING FANS. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD/MERCURY: VEHICLES MAY EXHIBIT A RED TRIANGLE LIGHT AND CODES INDICATING A TRANSAXLE OVERTEMP. CONDITION MAY RESULT IN REDUCED POWER AS SYSTEM ACTIVATES FAIL SAFE OPERATION. *PE
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · UNKNOWN OR OTHER.