The manufacturer’s record · Page 1 of 2
Original record summaries, dates and identifiers for this model-year. Records 1–100 of 132, ordered newest first. Dated records on this page: Jun 29, 2013–Jun 4, 2026.
Back to 2012 Fiat 500 problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 11033871
NHTSA source summary · Original PDF not reviewed by Recallfolio
Broken Exterior Driver And/Or Passenger Door Handles XB2 Warranty Extension Customers may comment the following: ● One or both exterior door handles are broken. This bulletin involves replacing one or both exterior door handles.
Source components: STRUCTURE:BODY.
Source record 11033871 at NHTSANHTSA communication ID: 11020767
NHTSA source summary · Original PDF not reviewed by Recallfolio
Verify Reman part number availability. Order the "R" part number for all orders:
Source components: ENGINE.
Source record 11020767 at NHTSANHTSA communication ID: 10248517
NHTSA source summary · Original PDF not reviewed by Recallfolio
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
Source components: EQUIPMENT.
Source record 10248517 at NHTSANHTSA communication ID: 10244356
NHTSA source summary · Original PDF not reviewed by Recallfolio
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
Source components: SUSPENSION.
Source record 10244356 at NHTSANHTSA communication ID: 10248509
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Source components: ELECTRICAL SYSTEM.
Source record 10248509 at NHTSANHTSA communication ID: 10244348
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10244348 at NHTSANHTSA communication ID: 10242717
NHTSA source summary · Original PDF not reviewed by Recallfolio
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10242717 at NHTSANHTSA communication ID: 10236933
NHTSA source summary · Original PDF not reviewed by Recallfolio
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10236933 at NHTSANHTSA communication ID: 10229572
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE.
Source record 10229572 at NHTSANHTSA communication ID: 10225424
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE.
Source record 10225424 at NHTSANHTSA communication ID: 10225287
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE · STRUCTURE:INTERIOR PANELS:DOOR · UNKNOWN OR OTHER.
Source record 10225287 at NHTSANHTSA communication ID: 10227983
NHTSA source summary · Original PDF not reviewed by Recallfolio
If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10227983 at NHTSANHTSA communication ID: 10230180
NHTSA source summary · Original PDF not reviewed by Recallfolio
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
Source components: ENGINE AND ENGINE COOLING.
Source record 10230180 at NHTSANHTSA communication ID: 10221594
NHTSA source summary · Original PDF not reviewed by Recallfolio
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
Source components: ENGINE AND ENGINE COOLING.
Source record 10221594 at NHTSANHTSA communication ID: 10221150
NHTSA source summary · Original PDF not reviewed by Recallfolio
Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
Source components: POWER TRAIN.
Source record 10221150 at NHTSANHTSA communication ID: 10221097
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Source components: POWER TRAIN.
Source record 10221097 at NHTSANHTSA communication ID: 10221822
NHTSA source summary · Original PDF not reviewed by Recallfolio
HVAC Control Panel Illumination Inoperative
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · UNKNOWN OR OTHER.
Source record 10221822 at NHTSANHTSA communication ID: 10180212
NHTSA source summary · Original PDF not reviewed by Recallfolio
HVAC Control Panel Illumination Inoperative
Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10180212 at NHTSANHTSA communication ID: 10175743
NHTSA source summary · Original PDF not reviewed by Recallfolio
Disinfectant Solution Recommended for COVID-19
Source components: EQUIPMENT · STRUCTURE.
Source record 10175743 at NHTSANHTSA communication ID: 10175735
NHTSA source summary · Original PDF not reviewed by Recallfolio
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10175735 at NHTSANHTSA communication ID: 10175733
NHTSA source summary · Original PDF not reviewed by Recallfolio
Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
Source components: FUEL SYSTEM, GASOLINE.
Source record 10175733 at NHTSANHTSA communication ID: 10170314
NHTSA source summary · Original PDF not reviewed by Recallfolio
Air Suspension Components Star Parts Catalog has been updated to show individual service parts for the compressor assembly. This will allow service technicians to repair the root cause without over repairing the system. Replace only the part deemed failed by the diagnostics performed. Individual parts include: - Compressor - Valve block - Individual hoses - Temp sensor - Shield - Air line clips NOTE: in most situations when a new compressor is needed, the compressor as a separate part is the correct repair, and the assembly would not be required.
Source components: SUSPENSION.
Source record 10170314 at NHTSANHTSA communication ID: 10220101
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Source components: STRUCTURE.
Source record 10220101 at NHTSANHTSA communication ID: 10220099
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Source components: STRUCTURE.
Source record 10220099 at NHTSANHTSA communication ID: 10220098
NHTSA source summary · Original PDF not reviewed by Recallfolio
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
Source components: VISIBILITY.
Source record 10220098 at NHTSANHTSA communication ID: 10220097
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Source components: EQUIPMENT · STRUCTURE.
Source record 10220097 at NHTSANHTSA communication ID: 10169249
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Source components: EQUIPMENT · STRUCTURE.
Source record 10169249 at NHTSANHTSA communication ID: 10169247
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Source components: EQUIPMENT.
Source record 10169247 at NHTSANHTSA communication ID: 10169246
NHTSA source summary · Original PDF not reviewed by Recallfolio
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
Source components: VISIBILITY.
Source record 10169246 at NHTSANHTSA communication ID: 10169245
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Source components: STRUCTURE.
Source record 10169245 at NHTSANHTSA communication ID: 10166537
NHTSA source summary · Original PDF not reviewed by Recallfolio
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10166537 at NHTSANHTSA communication ID: 10224899
NHTSA source summary · Original PDF not reviewed by Recallfolio
1.4L FIRE Service Engine (Normally Aspirated) This engine in this kit will contain one of 8 different production full dress engines, but labeled as component engine 68275870AA or 71AA. The received engine will be configured for use with an automatic transmission, (includes auto transmission adapter plate / flexplate) or manual transmission. (includes flywheel / clutch asm) The received engine will be configured with or without a block heater. If required, dealer to purchase/install the block heater. The included instruction sheet K6855863AB in engine kit 68275870AA is to be followed for all applications that it applies. Please see the sheet for details. In addition to the items detailed in instruction sheet K6855863AB, please read the following below to determine the rework required to install this engine into a 2012- 2018 Fiat 500 (FF) with 1.4L EAB normally aspirated engine: 1) determine which condition exists for the received service engine a) vehicle has a manual transmission, received manual transmission engine. b) vehicle has a manual transmission, received automatic transmission engine. c) vehicle has an automatic transmission, received automatic transmission engine. d) vehicle has an automatic transmission, received manual transmission engine. 2) follow below steps based on condition (a) through (d) above. Condition a) No further rework required, other than ordering/installing a block heater if required. Condition b) Remove flexplate / auto trans adapter plate / auto trans engine mounting bracket / auto trans engine oil dipstick from new service engine. Transfer flywheel / clutch / manual trans engine mounting bracket / manual trans engine oil dipstick from old engine. Order/install block heater if required. Condition c) Identify the automatic transmission adapter plate on the original engine. Looking at the rear of the vehicle engine with adapter plate mounted:
Source components: ELECTRICAL SYSTEM · EQUIPMENT · POWER TRAIN.
Source record 10224899 at NHTSANHTSA communication ID: 10219830
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
Source components: VISIBILITY:WINDSHIELD WIPER/WASHER.
Source record 10219830 at NHTSANHTSA communication ID: 10217521
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
Source components: FUEL SYSTEM, GASOLINE.
Source record 10217521 at NHTSANHTSA communication ID: 10139989
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
Source components: ENGINE AND ENGINE COOLING.
Source record 10139989 at NHTSANHTSA communication ID: 10139978
NHTSA source summary · Original PDF not reviewed by Recallfolio
Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Source components: SEAT BELTS.
Source record 10139978 at NHTSANHTSA communication ID: 10139985
NHTSA source summary · Original PDF not reviewed by Recallfolio
Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Source components: SEAT BELTS.
Source record 10139985 at NHTSANHTSA communication ID: 10223855
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
Source components: VISIBILITY/WIPER.
Source record 10223855 at NHTSANHTSA communication ID: 10218314
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: · P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream. · P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales Code EAF only). · P1607-00 - PCM Internal Shutdown Timer Rationality (Sales Code EAB only). · P2610-00 - PCM Internal Engine Off Timer Performance (Sales Code EAB only). · P1239-00 - Engine Oil Temperature Too Low (Sales Code EAB only). · P0298-00 - Engine Oil Temperature Too High (Sales Code EAB only). · P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. · P0456-00 - Evap System Small Leak. Some customers may also experience the following conditions: · Intermittent fast crank condition. · Cranks as if no compression. · Intermittent crank - no start condition. In addition, the following software enhancement is available: · ** Scan tool enhancements to communicate with wiTECH to read DTCs descriptions for 2013 MY vehicles equipped with manual transmissions (Sales Code DDF) and Euro 4 Emission W/OBD (Sales Code NB4).** · Improved reverse lamp activation time.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
Source record 10218314 at NHTSANHTSA communication ID: 10218130
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diagnostic And System Improvements.
Source components: POWER TRAIN.
Source record 10218130 at NHTSANHTSA communication ID: 10215164
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diagnostic And System Improvements.
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN.
Source record 10215164 at NHTSANHTSA communication ID: 10140265
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: · P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream. · P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales Code EAF only). · P1607-00 - PCM Internal Shutdown Timer Rationality (Sales Code EAB only). · P2610-00 - PCM Internal Engine Off Timer Performance (Sales Code EAB only). · P1239-00 - Engine Oil Temperature Too Low (Sales Code EAB only). · P0298-00 - Engine Oil Temperature Too High (Sales Code EAB only). · P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. · P0456-00 - Evap System Small Leak. Some customers may also experience the following conditions: · Intermittent fast crank condition. · Cranks as if no compression. · Intermittent crank - no start condition. In addition, the following software enhancement is available: · ** Scan tool enhancements to communicate with wiTECH to read DTCs descriptions for 2013 MY vehicles equipped with manual transmissions (Sales Code DDF) and Euro 4 Emission W/OBD (Sales Code NB4).** · Improved reverse lamp activation time.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
Source record 10140265 at NHTSANHTSA communication ID: 10076535
NHTSA source summary · Original PDF not reviewed by Recallfolio
SYMPTOM/CONDITION: Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales Code EAF only). P1607-00 - PCM Internal Shutdown Timer Rationality (Sales Code EAB only). P2610-00 - PCM Internal Engine Off Timer Performance (Sales Code EAB only). P1239-00 - Engine Oil Temperature Too Low (Sales Code EAB only). P0298-00 - Engine Oil Temperature Too High (Sales Code EAB only). P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. P045 Some customers may also experience the following conditions: Intermittent fast crank condition. Cranks as if no compression. Intermittent crank - no start condition. 6-00 - Evap System Small Leak.
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10076535 at NHTSANHTSA communication ID: 10218303
NHTSA source summary · Original PDF not reviewed by Recallfolio
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL.
Source record 10218303 at NHTSANHTSA communication ID: 10140254
NHTSA source summary · Original PDF not reviewed by Recallfolio
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM) · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10140254 at NHTSANHTSA communication ID: 10139956
NHTSA source summary · Original PDF not reviewed by Recallfolio
Adaptive Cruise Control Sensor 1) If you are replacing this part due to the cluster displaying Clean Radar Sensor in Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure
Source components: VEHICLE SPEED CONTROL:CRUISE CONTROL.
Source record 10139956 at NHTSANHTSA communication ID: 10219787
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Satisfaction Notification S20 Reprogram Powertrain Control Module The Powertrain Control Module (PCM) software on about 81,000 of the above vehicles may have backup lamp illumination timing that does not meet customer expectations. The PCM must be reprogrammed with new software.
Source components: ELECTRICAL SYSTEM.
Source record 10219787 at NHTSANHTSA communication ID: 10219779
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Powertrain Control Module (PCM) software on about 81,000 of the above vehicles may have backup lamp illumination timing that does not meet customer expectations.
Source components: ELECTRICAL SYSTEM.
Source record 10219779 at NHTSANHTSA communication ID: 10209650
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Powertrain Control Module (PCM) software on about 81,000 of the above vehicles may have backup lamp illumination timing that does not meet customer expectations.
Source components: ELECTRICAL SYSTEM.
Source record 10209650 at NHTSANHTSA communication ID: 10138971
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Satisfaction Notification S20 Reprogram Powertrain Control Module The Powertrain Control Module (PCM) software on about 81,000 of the above vehicles may have backup lamp illumination timing that does not meet customer expectations. The PCM must be reprogrammed with new software.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10138971 at NHTSANHTSA communication ID: 10215071
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hands Free Module Prompts Begin Erroneously.
Source components: ELECTRICAL SYSTEM.
Source record 10215071 at NHTSANHTSA communication ID: 10138948
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hands Free Module Prompts Begin Erroneously This bulletin involves diagnosing and based on outcome, either performing a USB flash or replacing the Mopar accessory Hands Free Module (HFM). A customer may experience the Uconnect prompts begin to play without pressing the Voice Recognition (VR) button. The prompt may repeat itself two or three times before exiting. The customer satisfaction enhancements are included with this software release. NOTE: After the HFM has been updated it will receive these enhancements: · Reduced ?Device Reading? wait time after connecting a device to the remote USB port. · Call / dial separation improves upon names being recognized as phone numbers. · Improved sound quality during Bluetooth streaming. · Increased iPod and iPhone compatibility. · SMS messaging support via Mobile Application Part (MAP) protocol (not all phones support the MAP protocol). · Added ?None of These? and ?Correction? to the phone book prompt menu for better handling of similar names. · Previous button will return the song currently being played to the beginning of the track. · AirPlay feature ?Dock Connector? no longer needs to be manually selected on Apple devices. This will resolve the ?No Audio? condition when the device is connected to the remote USB port and dock connector is not selected. NOTE: USB mode resume will no longer 'resume' after ignition is OFF.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10138948 at NHTSANHTSA communication ID: 10121927
NHTSA source summary · Original PDF not reviewed by Recallfolio
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
Source components: ENGINE AND ENGINE COOLING.
Source record 10121927 at NHTSANHTSA communication ID: 10218104
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diagnostic And System Improvements.
Source components: POWER TRAIN.
Source record 10218104 at NHTSANHTSA communication ID: 10215138
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diagnostic And System Improvements.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10215138 at NHTSANHTSA communication ID: 10160078
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: ? P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream. ? P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales Code EAF only). ? P1607-00 - PCM Internal Shutdown Timer Rationality (Sales Code EAB only). ? P2610-00 - PCM Internal Engine Off Timer Performance (Sales Code EAB only). ? P1239-00 - Engine Oil Temperature Too Low (Sales Code EAB only). ? P0298-00 - Engine Oil Temperature Too High (Sales Code EAB only). ? P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. ? P0456-00 - Evap System Small Leak. Some customers may also experience the following conditions. ? Intermittent fast crank condition. ? Cranks as if no compression. ? Intermittent crank - no start condition. In addition, the following software enhancement is available: ? Improved reverse lamp activation time.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
Source record 10160078 at NHTSANHTSA communication ID: 10121907
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination.
Source components: ELECTRICAL SYSTEM · POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10121907 at NHTSANHTSA communication ID: 10074921
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10074921 at NHTSANHTSA communication ID: 10218144
NHTSA source summary · Original PDF not reviewed by Recallfolio
System Improvements.
Source components: ELECTRICAL SYSTEM.
Source record 10218144 at NHTSANHTSA communication ID: 10215178
NHTSA source summary · Original PDF not reviewed by Recallfolio
System Improvements.
Source components: ELECTRICAL SYSTEM.
Source record 10215178 at NHTSANHTSA communication ID: 10159934
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 1.4L System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience one of the following conditions or a Malfunction Indicator Lamp (MIL) illumination. ? Crank but no start condition in extreme cold temperatures of -4°F (-20°C) partially due to conditions caused by available fuel blends.
Source components: ENGINE · POWER TRAIN.
Source record 10159934 at NHTSANHTSA communication ID: 10074957
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10074957 at NHTSANHTSA communication ID: 10217404
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Customers may experience one of the following: ? Intermittent fast crank condition ? Cranks as if no compression ? Malfunction Indicator Lamp (MIL) illumination ? Intermittent crank - no start condition The technician may find one or more of the following Diagnostic Trouble Codes (DTCs) are set in the Powertrain Control Module (PCM) memory: ? P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream ? P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales code EAF only) ? P1607-00 - PCM Internal Shutdown Timer Rationality (Sales code EAB only) ? P2610-00 - PCM Internal Engine Off Timer Performance (Sales code EAB only) ? P1239-00 - Engine Oil Temperature Too Low (Sales code EAB only) ? P0298-00 - Engine Oil Temperature Too High (Sales code EAB only) ? P2299-00 - Brake Pedal Position/ Accelerator Pedal Position Incompatible ? P0456-00 - Evap System Small Leak ? P0456-00 - Evap System Small Leak
Source components: ELECTRICAL SYSTEM · EXTERIOR LIGHTING · SERVICE BRAKES.
Source record 10217404 at NHTSANHTSA communication ID: 10216166
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Customers may experience one of the following: ? Intermittent fast crank condition ? Cranks as if no compression ? Malfunction Indicator Lamp (MIL) illumination ? Intermittent crank - no start condition The technician may find one or more of the following Diagnostic Trouble Codes (DTCs) are set in the Powertrain Control Module (PCM) memory: ? P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream ? P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales code EAF only) ? P1607-00 - PCM Internal Shutdown Timer Rationality (Sales code EAB only) ? P2610-00 - PCM Internal Engine Off Timer Performance (Sales code EAB only) ? P1239-00 - Engine Oil Temperature Too Low (Sales code EAB only) ? P0298-00 - Engine Oil Temperature Too High (Sales code EAB only) ? P2299-00 - Brake Pedal Position/ Accelerator Pedal Position Incompatible ? P0456-00 - Evap System Small Leak ? P0456-00 - Evap System Small Leak
Source components: ELECTRICAL SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10216166 at NHTSANHTSA communication ID: 10151747
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Customers may experience one of the following: ? Intermittent fast crank condition ? Cranks as if no compression ? Malfunction Indicator Lamp (MIL) illumination ? Intermittent crank - no start condition The technician may find one or more of the following Diagnostic Trouble Codes (DTCs) are set in the Powertrain Control Module (PCM) memory: ? P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream ? P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales code EAF only) ? P1607-00 - PCM Internal Shutdown Timer Rationality (Sales code EAB only) ? P2610-00 - PCM Internal Engine Off Timer Performance (Sales code EAB only) ? P1239-00 - Engine Oil Temperature Too Low (Sales code EAB only) ? P0298-00 - Engine Oil Temperature Too High (Sales code EAB only) ? P2299-00 - Brake Pedal Position/ Accelerator Pedal Position Incompatible ? P0456-00 - Evap System Small Leak ? P0456-00 - Evap System Small Leak
Source components: ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · SERVICE BRAKES, HYDRAULIC.
Source record 10151747 at NHTSANHTSA communication ID: 10150541
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash:1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon inspection, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) are set in the Powertrain Control Module (PCM) memory. ? P1524-00 Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales code EAF only) ? P1607-00 - PCM Internal Shutdown Timer Rationality. (Sales code EAB only) ? P2610-00 - PCM Internal Engine Off Timer Performance. (Sales code EAB only) ? P1239-00 - Engine Oil Temperature Too Low. (Sales code EAB only) ? P0298-00 - Engine Oil Temperature Too High. (Sales code EAB only) ? P2299-00 - Brake Pedal Position/ Accelerator Pedal Position Incompatible. ? P0456-00 - Evap System Small Leak ? P0456-00 - Evap System Small Leak In addition, the customer may also experience an intermittent crank, no start condition. The customer may indicate the engine sounds like it is freewheeling or has no compression. When this issue occurs, it is typically resolved with a simple ignition key cycle. This may happen in colder temperatures.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · SERVICE BRAKES, HYDRAULIC.
Source record 10150541 at NHTSANHTSA communication ID: 10150520
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise From The Steering Column While Turning The Steering Wheel This bulletin involves replacing the steering intermediate shaft. Clunking, popping, knocking noise from the lower steering column while turning the steering wheel.
Source components: STEERING.
Source record 10150520 at NHTSANHTSA communication ID: 10057938
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHRYSLER 2012-2015 FIAT 500: SERVICE BULLETIN INFORMATION AND REPAIR PROCEDURE FOR NOISE IN THE STEERING COLUMN WHILE TURNING THE STEERING WHEEL. *LJ
Source components: STEERING:COLUMN.
Source record 10057938 at NHTSANHTSA communication ID: 10150518
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash:1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon inspection, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) are set in the Powertrain Control Module (PCM) memory. ? P0452-00 - EVAP Pressure Switch Stuck Closed. (2012 vehicles with Sales code EAB) ? P1607-00 - PCM Internal Shutdown Timer Rationality. (Sales code EAB only) ? P2610-00 - PCM Internal Engine Off Timer Performance. (Sales code EAB only) ? P1239-00 - Engine Oil Temperature Too Low. (Sales code EAB only) ? P0298-00 - Engine Oil Temperature Too High. (Sales code EAB only) ? P2299-00 - Brake Pedal Position/ Accelerator Pedal Position Incompatible. ? P0456-00 - Evap System Small Leak ? P0456-00 - Evap System Small Leak In addition, the customer may also experience an intermittent crank, no start condition. The customer may indicate the engine sounds like it is freewheeling or has no compression. When this issue occurs, it is typically resolved with a simple ignition key cycle. This may happen in colder temperatures.
Source components: ELECTRICAL SYSTEM · ENGINE · SERVICE BRAKES, HYDRAULIC.
Source record 10150518 at NHTSANHTSA communication ID: 10057937
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHRYSLER 2012-2013 FIAT 500/ABARTH : THIS BULLETIN SUPERSEDES 18-007-14 REV B. DATED OCTOBER 18,2014 PLEASE REMOVE FROM YOUR FILES. INFORMATION ON THE DIAGNOSTIC AND SYSTEM IMPROVEMENTS WHICH REQUIRES ERASING AND REPROGRAMMING POWER CONTROL MODULE SOFTWARE. *LJ
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10057937 at NHTSANHTSA communication ID: 10229177
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: Armrest Issue Description: When ordering a replacement armrest for a FIAT 500 VEHICLE built prior to 4/23/2012, a new FRAME-FRONT SEAT BACK is required (68194579AA). ~ Refer to DealerConnect, TechConnect for repair instructions for this assembly.
Source components: EQUIPMENT.
Source record 10229177 at NHTSANHTSA communication ID: 10223599
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
Source components: ENGINE AND ENGINE COOLING.
Source record 10223599 at NHTSANHTSA communication ID: 10223598
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: Armrest Issue Description: When ordering a replacement armrest for a FIAT 500 VEHICLE built prior to 4/23/2012, a new FRAME-FRONT SEAT BACK is required (68194579AA). ~ Refer to DealerConnect, TechConnect for repair instructions for this assembly.
Source components: EQUIPMENT.
Source record 10223598 at NHTSANHTSA communication ID: 10221511
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: Armrest Issue Description: When ordering a replacement armrest for a FIAT 500 VEHICLE built prior to 4/23/2012, a new FRAME-FRONT SEAT BACK is required (68194579AA). ~ Refer to DealerConnect, TechConnect for repair instructions for this assembly.
Source components: EQUIPMENT.
Source record 10221511 at NHTSANHTSA communication ID: 10144811
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: Armrest Issue Description: When ordering a replacement armrest for a FIAT 500 VEHICLE built prior to 4/23/2012, a new FRAME-FRONT SEAT BACK is required (68194579AA). ~ Refer to DealerConnect, TechConnect for repair instructions for this assembly.
Source components: SEATS.
Source record 10144811 at NHTSANHTSA communication ID: 10139792
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash:1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon inspection, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) are set in the Powertrain Control Module (PCM) memory. ? P1607-00 - PCM Internal Shutdown Timer Rationality. (Sales code EAB only) ? P2610-00 - PCM Internal Engine Off Timer Performance. (Sales code EAB only) ? P1239-00 - Engine Oil Temperature Too Low. (Sales code EAB only) ? P0298-00 - Engine Oil Temperature Too High. (Sales code EAB only) ? P2299-00 - Brake Pedal Position/ Accelerator Pedal Position Incompatible. ? P0456-00 - Evap System Small Leak ? P0456-00 - Evap System Small Leak In addition, the customer may also experience an intermittent crank, no start condition. The customer may indicate the engine sounds like it is freewheeling or has no compression. When this issue occurs, it is typically resolved with a simple ignition key cycle. This may happen in colder temperatures.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10139792 at NHTSANHTSA communication ID: 10221036
NHTSA source summary · Original PDF not reviewed by Recallfolio
Front Suspension Clunk Noise While Making Left And Right Turns This bulletin involves replacing the front strut jounce bumpers. Clunk noise coming from the front suspension. Noise may be more noticeable during cold temperatures below 40°F (4°C). Noise may be eliminated with warmer temperatures.
Source components: BACK OVER PREVENTION · ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC) · SEATS · SUSPENSION.
Source record 10221036 at NHTSANHTSA communication ID: 10139756
NHTSA source summary · Original PDF not reviewed by Recallfolio
Front Suspension Clunk Noise While Making Left And Right Turns This bulletin involves replacing the front strut jounce bumpers. Clunk noise coming from the front suspension. Noise may be more noticeable during cold temperatures below 40°F (4°C). Noise may be eliminated with warmer temperatures.
Source components: SUSPENSION.
Source record 10139756 at NHTSANHTSA communication ID: 10061849
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: SUSPENSION:FRONT.
Source record 10061849 at NHTSANHTSA communication ID: 10139693
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Engine Crank, No Start and/or Malfunction Indicator Lamp (MIL) Illumination This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Customers may complain of an intermittent crank, no start condition. The customer may also indicate the engine sounds like it is freewheeling or has no compression. When this issue occurs, it is typically resolved with a simple ignition key cycle. A small number of customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: P2299 - Brake Pedal Position/ Accelerator Pedal Position Incompatible. The revised software includes cold weather starting enhancements.
Source components: ENGINE AND ENGINE COOLING.
Source record 10139693 at NHTSANHTSA communication ID: 10063251
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10063251 at NHTSANHTSA communication ID: 10139675
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear Window Washer Nozzle Drips And/Or Leaks While Driving This bulletin involves installing a check valve and hose assembly behind the rear window washer nozzle. Rear window washer nozzle leaks and/or drips while driving.
Source components: VISIBILITY:REAR WINDOW WIPER/WASHER.
Source record 10139675 at NHTSANHTSA communication ID: 10063791
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: VISIBILITY:REAR WINDOW WIPER/WASHER.
Source record 10063791 at NHTSANHTSA communication ID: 10139673
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear Axle Alignment Shims This bulletin is to inform service personnel of the availability of rear axle alignment shims.
Source components: SUSPENSION.
Source record 10139673 at NHTSANHTSA communication ID: 10229871
NHTSA source summary · Original PDF not reviewed by Recallfolio
Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
Source components: ELECTRICAL SYSTEM.
Source record 10229871 at NHTSANHTSA communication ID: 10218819
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Clock In The Cluster Gains Or Loses Time This bulletin involves updating the software in the Instrument Panel Cluster (IPC). Some customers may notice that their clock may gain or loses time.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
Source record 10218819 at NHTSANHTSA communication ID: 10218783
NHTSA source summary · Original PDF not reviewed by Recallfolio
Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
Source components: ELECTRICAL SYSTEM.
Source record 10218783 at NHTSANHTSA communication ID: 10217978
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Clock In The Cluster Gains Or Loses Time This bulletin involves updating the software in the Instrument Panel Cluster (IPC). Some customers may notice that their clock may gain or loses time.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · ELECTRICAL SYSTEM:SOFTWARE · UNKNOWN OR OTHER.
Source record 10217978 at NHTSANHTSA communication ID: 10217942
NHTSA source summary · Original PDF not reviewed by Recallfolio
Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
Source components: ELECTRICAL SYSTEM.
Source record 10217942 at NHTSANHTSA communication ID: 10139652
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Clock In The Cluster Gains Or Loses Time This bulletin involves updating the software in the Instrument Panel Cluster (IPC). Some customers may notice that their clock may gain or loses time.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
Source record 10139652 at NHTSANHTSA communication ID: 10062110
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM.
Source record 10062110 at NHTSANHTSA communication ID: 10136949
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Engine Crank, No Start and/or Malfunction Indicator Lamp (MIL) Illumination This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Customers may complain of an intermittent crank, no start condition. The customer may also indicate the engine sounds like it is freewheeling or has no compression. When this issue occurs, it is typically resolved with a simple ignition key cycle. A small number of customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: ? P2299 - Brake Pedal Position/ Accelerator Pedal Position Incompatible
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
Source record 10136949 at NHTSANHTSA communication ID: 10055329
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHRYSLER: SOME VEHICLES ARE EXHIBITING MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION, NO START, ENGINE CRANK AND THE POWERTRAIN CONTROL MODULE (PCM) HAS SELECTIVELY ERASING AND REPROGRAMMING WITH NEW SOFTWARE. MODEL 2012 500/ABARTH. *PE
Source components: ENGINE.
Source record 10055329 at NHTSANHTSA communication ID: 10136928
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Clock In The Cluster Gains Time This bulletin involves updating the software in the Instrument Panel Cluster (IPC). Some customers may notice that their clock may gain time.
Source components: ELECTRICAL SYSTEM.
Source record 10136928 at NHTSANHTSA communication ID: 10062111
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM.
Source record 10062111 at NHTSANHTSA communication ID: 10064496
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: STRUCTURE:BODY.
Source record 10064496 at NHTSANHTSA communication ID: 10064482
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: STRUCTURE:BODY.
Source record 10064482 at NHTSANHTSA communication ID: 10220427
NHTSA source summary · Original PDF not reviewed by Recallfolio
Front And/Or Rear Emblems Bubbling And/Or Fading This bulletin involves replacing the rear FIAT emblem and inspecting and if necessary replacing the front FIAT emblem. Front And/Or Rear Emblems Bubbling And/Or Fading
Source components: STRUCTURE.
Source record 10220427 at NHTSANHTSA communication ID: 10189195
NHTSA source summary · Original PDF not reviewed by Recallfolio
Front And/Or Rear Emblems Bubbling And/Or Fading This bulletin involves replacing the rear FIAT emblem and inspecting and if necessary replacing the front FIAT emblem. Front And/Or Rear Emblems Bubbling And/Or Fading
Source components: EQUIPMENT.
Source record 10189195 at NHTSANHTSA communication ID: 10136904
NHTSA source summary · Original PDF not reviewed by Recallfolio
Front And/Or Rear Emblems Bubbling And/Or Fading This bulletin involves replacing the rear FIAT emblem and inspecting and if necessary replacing the front FIAT emblem. Front And/Or Rear Emblems Bubbling And/Or Fading
Source components: STRUCTURE:BODY:BUMPERS.
Source record 10136904 at NHTSA