Original record summaries, dates and identifiers for this model-year. Records 201–254 of 254, ordered newest first. Dated records on this page: Mar 20, 2013–Apr 30, 2020.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Apr 30, 2020Service Bulletin/Repair Instructions
S1808000152
NHTSA communication ID: 10175698
NHTSA source summary · Original PDF not reviewed by Recallfolio
CEL (Check Engine Lamp) Illuminates, Recent PCM Replace Or Flash Update Performed, DTC P057B Brake Pedal Position Sensor Circuit Performance
NHTSA source summary · Original PDF not reviewed by Recallfolio
Active Exhaust Valve Rattle This bulletin involves inspecting the active exhaust actuator motor and tightening to specifications, if necessary. The customer may describe that vehicle has an exhaust rattle on acceleration and deceleration in1500-2400 RPM range when the sport mode is off.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hood Bezel is Warped and Hood Paint is Damaged or Chipped This bulletin involves replacing the hood bezel, inspecting the hood for paint damage and if required, refinishing the entire hood. The customer may describe the following:The hood bezel is warping and in some cases, chipping the paint on the sides and corners of the hood bezel opening. If a Demon customer (U.S. Only) visits the dealership prior to being contacted or receiving the RRT letter from SRT, please have the customer call SRT Premium Care at 1-855-778-8326 to arrange an appointment. Ask the customer to reference ?Replacing their Demon Hood Bezel? when calling.All (U.S. Only) customers will be contacted by a Customer Care Advisor regarding this Service Bulletin. If the customer (U.S. Only) chooses to have their vehicle repaired by a third party preferred paint facility with reimbursement,an inspection with photos of the damaged paint are to be performed by the dealership. These customers must also receive a new hood bezel from the dealership for installation at a third party facility.Perform the Diagnostic Procedure. Proceed toStep 1of the Diagnostic Procedure. All (Canadian Only) customer vehicles must be inspected. Hood bezels will only be released through the Tech Hotline Center 1-800-361-2702 (English) or 1-800-361-1702 (French).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hood Bezel is Warped and Hood Paint is Damaged or Chipped This bulletin involves replacing the hood bezel, inspecting the hood for paint damage and if required, refinishing the entire hood. The customer may describe the following:The hood bezel is warping and in some cases, chipping the paint on the sides and corners of the hood bezel opening. If a Demon customer (U.S. Only) visits the dealership prior to being contacted or receiving the RRT letter from SRT, please have the customer call SRT Premium Care at 1-855-778-8326 to arrange an appointment. Ask the customer to reference ?Replacing their Demon Hood Bezel? when calling.All (U.S. Only) customers will be contacted by a Customer Care Advisor regarding this Service Bulletin. If the customer (U.S. Only) chooses to have their vehicle repaired by a third party preferred paint facility with reimbursement,an inspection with photos of the damaged paint are to be performed by the dealership. These customers must also receive a new hood bezel from the dealership for installation at a third party facility.Perform the Diagnostic Procedure. Proceed toStep 1of the Diagnostic Procedure. All (Canadian Only) customer vehicles must be inspected. Hood bezels will only be released through the Tech Hotline Center 1-800-361-2702 (English) or 1-800-361-1702 (French).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hood Bezel is Warped and Hood Paint is Damaged or Chipped This bulletin involves replacing the hood bezel, inspecting the hood for paint damage and if required, refinishing the entire hood. The customer may describe the following:The hood bezel is warping and in some cases, chipping the paint on the sides and corners of the hood bezel opening. If a Demon customer (U.S. Only) visits the dealership prior to being contacted or receiving the RRT letter from SRT, please have the customer call SRT Premium Care at 1-855-778-8326 to arrange an appointment. Ask the customer to reference ?Replacing their Demon Hood Bezel? when calling.All (U.S. Only) customers will be contacted by a Customer Care Advisor regarding this Service Bulletin. If the customer (U.S. Only) chooses to have their vehicle repaired by a third party preferred paint facility with reimbursement,an inspection with photos of the damaged paint are to be performed by the dealership. These customers must also receive a new hood bezel from the dealership for installation at a third party facility.Perform the Diagnostic Procedure. Proceed toStep 1of the Diagnostic Procedure. All (Canadian Only) customer vehicles must be inspected. Hood bezels will only be released through the Tech Hotline Center 1-800-361-2702 (English) or 1-800-361-1702 (French).
NHTSA source summary · Original PDF not reviewed by Recallfolio
CORE, Heater (with tubes) When replacing the heater core for LA, LX, and LD vehicles, make sure to return not only the heater core but also the connecting tubes, seals and retainers. For any questions contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
CORE, Heater (with tubes) When replacing the heater core for LA, LX, and LD vehicles, make sure to return not only the heater core but also the connecting tubes, seals and retainers. For any questions contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
CORE, Heater (with tubes) When replacing the heater core for LA, LX, and LD vehicles, make sure to return not only the heater core but also the connecting tubes, seals and retainers. For any questions contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
HEADLAMP After performing the headlamp condensation clearing service procedure, If the WK Headlamp is being replaced for Moisture / Condensation issue, please e-mail pictures of the Moisture / Condensation issue to FCA Redacted Content and then continue with the replacement.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. The following software update is available: Improvements to 2-1 downshift quality.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience one or both of the following: A long crank time during engine start. Air Conditioning (A/C) clutch is intermittently not engaging when cruise control is activated.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
UJQ without RS9 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 22.5. Customers may experience one or more of the following: Arabic language is missing. Navigation inoperable. Bottom menu bar of the radio is non responsive or frozen. After viewing the weather map following a flood advisory popup, the main soft key's at the bottom of the screen may not respond when pressed. Radio will not turn off. Poor AM/FM Reception. Radio may reset, turn itself off and then back on again. Radio display screen lock up. Park assist chime will continue to chime after the vehicle is turned off. Uconnect Live feature may not function properly.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Air Suspension Components Star Parts Catalog has been updated to show individual service parts for the compressor assembly. This will allow service technicians to repair the root cause without over repairing the system. Replace only the part deemed failed by the diagnostics performed. Individual parts include: - Compressor - Valve block - Individual hoses - Temp sensor - Shield - Air line clips NOTE: in most situations when a new compressor is needed, the compressor as a separate part is the correct repair, and the assembly would not be required.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transfer case seal, Transmission Output Seal If vehicle has a fluid leak between the transfer case and the transmission on an AWD vehicle and it has been determined that the transfer case is leaking from the vent hole, don't replace the input seal. The vehicle can be repaired by: Transfer Case replace - 68214750A$ 3.6 Pentastar 68214751A$ 5.7 Hemi Replace Front Case Half - 68101734A$ 3.6 Pentastar 68101734A$ 5.7 Hemi Note: The transfer case oil already has dye in it so leak confirmation with a black light can be achieved.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hood Bezel is Warped and Hood Paint is Damaged or Chipped This bulletin involves replacing the hood bezel, inspecting the hood for paint damage and if required, refinishing the entire hood. The customer may describe the following: The hood bezel is warping and in some cases, chipping the paint on the sides and corners of the hood bezel opening. If a Demon customer (U.S. Only) visits the dealership prior to being contacted or receiving the RRT letter from SRT, please have the customer call SRT Premium Care at 1-855-778-8326 to arrange an appointment. Ask the customer to reference ?Replacing their Demon Hood Bezel? when calling.All (U.S. Only) customers will be contacted by a Customer Care Advisor regarding this Service Bulletin. If the customer (U.S. Only) chooses to have their vehicle repaired by a third party preferred paint facility with reimbursement,an inspection with photos of the damaged paint are to be performed by the dealership. These customers must also receive a new hood bezel from the dealership for installation at a third party facility.Perform the Diagnostic Procedure. Proceed toStep 1of the Diagnostic Procedure. All (Canadian Only) customer vehicles must be inspected. Hood bezels will only be released through the Tech Hotline Center 1-800-361-2702 (English) or 1-800-361-1702 (French).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hood Bezel is Warped and Hood Paint is Damaged or Chipped This bulletin involves replacing the hood bezel, inspecting the hood for paint damage and if required, refinishing the entire hood. The customer may describe the following: The hood bezel is warping and in some cases, chipping the paint on the sides and corners of the hood bezel opening. If a Demon customer (U.S. Only) visits the dealership prior to being contacted or receiving the RRT letter from SRT, please have the customer call SRT Premium Care at 1-855-778-8326 to arrange an appointment. Ask the customer to reference ?Replacing their Demon Hood Bezel? when calling.All (U.S. Only) customers will be contacted by a Customer Care Advisor regarding this Service Bulletin. If the customer (U.S. Only) chooses to have their vehicle repaired by a third party preferred paint facility with reimbursement, an inspection with photos of the damaged paint are to be performed by the dealership. These customers must also receive a new hood bezel from the dealership for installation at a third party facility.Perform the Diagnostic Procedure. Proceed toStep 1of the Diagnostic Procedure. All (Canadian Only) customer vehicles must be inspected. Hood bezels will only be released through the Tech Hotline Center 1-800-361-2702 (English) or 1-800-361-1702 (French).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
NHTSA source summary · Original PDF not reviewed by Recallfolio
UAS, UAQ, UCS and UCQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to:22.6 - DS, D2, DP, DD, DF and DJ vehicle with UAS, UCQ and UAQ radio. 22.5 - LA, LD and LX vehicle with UAS and UAQ. 21.9 - All other vehicles and radios. Customers may experience one or more of the following:Audio Distortion (DS, D2, DP, DD, DF and DJ vehicle with UAS, UCQ and UAQ radio). Menu bar at the bottom of the radio display is frozen (LA, LD and LX with UAQ and UAS radios). Can not change the time on the clock (LA, LD and LX with UAS radios). Anti-theft code request message. Backup camera screen is blank. Lines appear across screen. Radio control screen is blank or locked. Radio resets intermittently. Unable to adjust volume. Radio will not switch modes between AM, FM, SAT or Media. In addition, the following enhancements are included in this update:Carplay® connectivity improvements. Improvement to Bluetooth phone pairing. Improved sound quality when using a Bluetooth phone.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: HVAC System Enhancement This bulletin involves reprogramming the Heating Ventilation Air Conditioning (HVAC)Module with new software. Customers may experience one of the following:Unpleasant odor in the vehicle after driving from highway speed limits back downto city speed limits. The left temperature door is inoperable(2014-2018 Vehicles Only). Updating the HVAC software will correct these conditions.
NHTSA source summary · Original PDF not reviewed by Recallfolio
UAS, UAQ, UCS and UCQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to:28.3 - WD and WK vehicle with UAQ and UCQ radio. 22.6 - DS, D2, DP, DD, DF and DJ vehicle with UAS, UCQ and UAQ radio. 22.5 - LA, LD and LX vehicle with UAS and UAQ. 21.9 - All other vehicles and radios. Customers may experience one or more of the following:Warning chime will not turn off (WD and WK with UAQ and UCQ radio). Audio Distortion (DS, D2, DP, DD, DF and DJ vehicle with UAS, UCQ and UAQ radio). Menu bar at the bottom of the radio display is frozen (LA, LD and LX with UAQ and UAS radios). Can not change the time on the clock (LA, LD and LX with UAS radios). Anti-theft code request message. Backup camera screen is blank. Lines appear across screen. Radio control screen is blank or locked. Radio resets intermittently. Unable to adjust volume. Radio will not switch modes between AM, FM, SAT or Media. In addition, the following enhancements are included in this update:Bluetooth® improvements (WD and WK with UAQ and UCQ radio). Voice Recognition (VR) improvements (WD and WK with UAQ and UCQ radio). Radio stability improvements (WD and WK with UAQ and UCQ radio). Carplay® connectivity improvements. Improvement to Bluetooth phone pairing. Improved sound quality when using a Bluetooth phone.
NHTSA source summary · Original PDF not reviewed by Recallfolio
UAS, UAQ, UCS and UCQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to:22.6 - DS, D2, DP, DD, DF and DJ vehicle with UAS, UCQ and UAQ radio. 22.5 - LA, LD and LX vehicle with UAS and UAQ. 21.9 - All other vehicles and radios. Customers may experience one or more of the following:Audio Distortion (DS, D2, DP, DD, DF and DJ vehicle with UAS, UCQ and UAQ radio). Menu bar at the bottom of the radio display is frozen (LA, LD and LX with UAQ and UAS radios). Can not change the time on the clock (LA, LD and LX with UAS radios). Anti-theft code request message. Backup camera screen is blank. Lines appear across screen. Radio control screen is blank or locked. Radio resets intermittently. Unable to adjust volume. Radio will not switch modes between AM, FM, SAT or Media. In addition, the following enhancements are included in this update:Carplay® connectivity improvements. Improvement to Bluetooth® phone pairing. Improved sound quality when using a Bluetooth phone.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.24. Customers may experience one or more of the following: Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-Y7, on JL vehicles only). Ghost Touch, features, modes and App?s changing, without drivers input. Speaker pop noise when using Bluetooth device. When vehicle is first started the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-Y7) JL only. Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or AndroidAuto® Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. PIN clear and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. The radio screen shows messages ?Software Update? or ?Reinsert USB Device? and displays that screen in a continuous loop.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
UJQ with RS9 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 21.9. Customers may experience one or more of the following:Arabic language is not listed in language page. Radio may reset, turn itself off and then back on again. Radio display screen lock up. Park assist chime will continue to chime after the vehicle is turned off. Russian language is not listed in language page.
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADJUSTER, Seat For passenger seat exhibiting high fore/aft adjuster effort, please call Randy Olejniczak ar 248-766-4821. If front passenger seat is unbolted, please notice if the seat tracks seem to be out of alignment or not aligned properly with the front mounting holes in the floor pan. If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
ACTUATOR, A/C and Heater Before replacing HVAC actuator, please contact either Thomas Conway (248) 635-7090 or Paul Aquino (248) 854-4819. Engineering is looking to gather infomation on fail mode and customer concern. If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
A/C Pressure Transducer A/C inoperative and diagnosis leads to pressure transducer. Call Steve Rice at cell (248) 867-0061 before replacing the pressure transducer. If no response in 15 minutes, please proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
A/C Pressure Transducer A/C inoperative and diagnosis leads to pressure transducer. Call Steve Rice at cell (248) 867-0061 before replacing the pressure transducer. If no response in 15 minutes, please proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Front Engine Cover Oil Weep This bulletin involves inspecting and replacing the right side front engine cover gasket if necessary. The customer may experience an oil weep from the right front engine cover.
NHTSA source summary · Original PDF not reviewed by Recallfolio
UAG, UCG, UDG, UJG, ULG and UGG Radio Enhancements This bulletin involves updating the radio with the latest available software. Customers or vehicles may experience the following:The radio screen shows messages ?Software Update? or ?Re-Insert USB Device? and displays that screen in a continuous loop.
Source components: BACK OVER PREVENTION:SOFTWARE · EQUIPMENT:APPLIANCE:TV/RADIO/SPEAKERS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
Source components: STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
NHTSA source summary · Original PDF not reviewed by Recallfolio
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~