The manufacturer’s record · Page 1 of 3
Original record summaries, dates and identifiers for this model-year. Records 1–100 of 206, ordered newest first. Dated records on this page: Nov 21, 2015–Aug 16, 2025.
Back to 2013 Dodge CHALLENGER problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 11022011
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
Source components: STRUCTURE:BODY.
Source record 11022011 at NHTSANHTSA communication ID: 11022012
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
Source components: STRUCTURE:BODY.
Source record 11022012 at NHTSANHTSA communication ID: 11022003
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
Source components: STRUCTURE:BODY.
Source record 11022003 at NHTSANHTSA communication ID: 11005320
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
Source components: STRUCTURE:BODY.
Source record 11005320 at NHTSANHTSA communication ID: 10248517
NHTSA source summary · Original PDF not reviewed by Recallfolio
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
Source components: EQUIPMENT.
Source record 10248517 at NHTSANHTSA communication ID: 10244356
NHTSA source summary · Original PDF not reviewed by Recallfolio
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
Source components: SUSPENSION.
Source record 10244356 at NHTSANHTSA communication ID: 10248509
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Source components: ELECTRICAL SYSTEM.
Source record 10248509 at NHTSANHTSA communication ID: 10244348
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10244348 at NHTSANHTSA communication ID: 10243209
NHTSA source summary · Original PDF not reviewed by Recallfolio
FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243209 at NHTSANHTSA communication ID: 10243208
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243208 at NHTSANHTSA communication ID: 10242717
NHTSA source summary · Original PDF not reviewed by Recallfolio
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10242717 at NHTSANHTSA communication ID: 10241118
NHTSA source summary · Original PDF not reviewed by Recallfolio
Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module.
Source components: ELECTRICAL SYSTEM · FUEL SYSTEM, GASOLINE.
Source record 10241118 at NHTSANHTSA communication ID: 10239957
NHTSA source summary · Original PDF not reviewed by Recallfolio
Water Quality When Mixed With Engine Coolant
Source components: ENGINE AND ENGINE COOLING.
Source record 10239957 at NHTSANHTSA communication ID: 10236933
NHTSA source summary · Original PDF not reviewed by Recallfolio
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10236933 at NHTSANHTSA communication ID: 10247906
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: ENGINE AND ENGINE COOLING.
Source record 10247906 at NHTSANHTSA communication ID: 10234379
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: ENGINE AND ENGINE COOLING.
Source record 10234379 at NHTSANHTSA communication ID: 10247905
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: BACK OVER PREVENTION.
Source record 10247905 at NHTSANHTSA communication ID: 10234378
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: ENGINE AND ENGINE COOLING.
Source record 10234378 at NHTSANHTSA communication ID: 10247995
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
Source components: STRUCTURE.
Source record 10247995 at NHTSANHTSA communication ID: 10234468
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
Source components: STRUCTURE.
Source record 10234468 at NHTSANHTSA communication ID: 10229810
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
Source components: STRUCTURE.
Source record 10229810 at NHTSANHTSA communication ID: 10229572
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE.
Source record 10229572 at NHTSANHTSA communication ID: 10225424
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE.
Source record 10225424 at NHTSANHTSA communication ID: 10225287
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE · STRUCTURE:INTERIOR PANELS:DOOR · UNKNOWN OR OTHER.
Source record 10225287 at NHTSANHTSA communication ID: 10221377
NHTSA source summary · Original PDF not reviewed by Recallfolio
Overhead Console If the sunglasses holder door in the overhead console will not stay closed, inspect the Latch for damage. The Latch is now released for service under part number 68599540A$.
Source components: EQUIPMENT.
Source record 10221377 at NHTSANHTSA communication ID: 10221441
NHTSA source summary · Original PDF not reviewed by Recallfolio
No Start Condition After A Fuel Pump Replacement, Multiple Fuel System Level Related DTC?s Setting
Source components: FUEL SYSTEM, GASOLINE.
Source record 10221441 at NHTSANHTSA communication ID: 10228020
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · UNKNOWN OR OTHER.
Source record 10228020 at NHTSANHTSA communication ID: 10227983
NHTSA source summary · Original PDF not reviewed by Recallfolio
If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10227983 at NHTSANHTSA communication ID: 10212248
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:FILTER/SCREEN.
Source record 10212248 at NHTSANHTSA communication ID: 10220687
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
Source components: ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR · UNKNOWN OR OTHER.
Source record 10220687 at NHTSANHTSA communication ID: 10212290
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
Source components: ENGINE · ENGINE AND ENGINE COOLING.
Source record 10212290 at NHTSANHTSA communication ID: 10230180
NHTSA source summary · Original PDF not reviewed by Recallfolio
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
Source components: ENGINE AND ENGINE COOLING.
Source record 10230180 at NHTSANHTSA communication ID: 10221594
NHTSA source summary · Original PDF not reviewed by Recallfolio
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
Source components: ENGINE AND ENGINE COOLING.
Source record 10221594 at NHTSANHTSA communication ID: 10221154
NHTSA source summary · Original PDF not reviewed by Recallfolio
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
Source components: ELECTRICAL SYSTEM.
Source record 10221154 at NHTSANHTSA communication ID: 10194007
NHTSA source summary · Original PDF not reviewed by Recallfolio
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
Source components: POWER TRAIN.
Source record 10194007 at NHTSANHTSA communication ID: 10221150
NHTSA source summary · Original PDF not reviewed by Recallfolio
Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
Source components: POWER TRAIN.
Source record 10221150 at NHTSANHTSA communication ID: 10221097
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Source components: POWER TRAIN.
Source record 10221097 at NHTSANHTSA communication ID: 10220843
NHTSA source summary · Original PDF not reviewed by Recallfolio
NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
Source components: POWER TRAIN.
Source record 10220843 at NHTSANHTSA communication ID: 10190590
NHTSA source summary · Original PDF not reviewed by Recallfolio
NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
Source components: POWER TRAIN.
Source record 10190590 at NHTSANHTSA communication ID: 10190589
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor. 5) When replacing PN's 68310865A$ & 68308741A$, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: ENGINE AND ENGINE COOLING.
Source record 10190589 at NHTSANHTSA communication ID: 10215879
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
Source components: ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR.
Source record 10215879 at NHTSANHTSA communication ID: 10187058
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
Source components: ENGINE AND ENGINE COOLING.
Source record 10187058 at NHTSANHTSA communication ID: 10223987
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
Source components: STRUCTURE.
Source record 10223987 at NHTSANHTSA communication ID: 10183098
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
Source components: STRUCTURE.
Source record 10183098 at NHTSANHTSA communication ID: 10221897
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):U1424-00 - Implausible Engine Torque Signal Received(2015 MY). P0456 - EVAP System Small Leak. P2610 - PCM Internal Engine Off Timer Performance. P2299 - Brake Pedal Position / Accelerator Pedal Position Incompatible. P0335 - Crankshaft Position Sensor Circuit(2014-2015 MY). U0140 - Lost Communication With Body Control Module(LC, LD and LX). P1621 - O2 Sensor Reference Voltage Circuit Low. P1622 - O2 Sensor Reference Voltage Circuit High. P0606 - Internal Control Processor. P0300 - Multiple Cylinder Misfire. P219A - Bank 1 Air-Fuel Ratio Imbalance. P219B - Bank 2 Air-Fuel Ratio Imbalance. P0307 - Cylinder 7 Misfire. P2096 - Downstream Fuel Trim System 1 Lean. P2097 - Downstream Fuel Trim System 1 Rich. The following software enhancements are also available(2015 MY):Reverse gear lock-out change from 16 kph (10 mph) to 4.8 kph (3 mph)(Sales Code EZC with DEC). Change to purge vapor control calibration(Sales Code EZH with DGJ). Improvements to vehicle overspeed control(Sales Code EZH with DGJ). Calibration update to the electronic voltage regulator voltage set point(Sales Code EZH with DGJ). Additional Symptoms:Customers with a Pursuit Dodge Charger (LD) may describe an unpleasant odor in the vehicle under certain extreme ambient conditions2013-2015 MY LD with (Sales Codes EZH with AHB or AHV only). Technicians may find that the original vehicle Frequency Operated Button Integrated Key (FOBIK) does not function properly following replacement of the Wireless Ignition Node (WIN/WCM). The Secret Key information stored in the PCM may be corrupt. This update will restore the PCM?s ability to store/transfer valid Secret Key information
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
Source record 10221897 at NHTSANHTSA communication ID: 10180287
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):U1424-00 - Implausible Engine Torque Signal Received(2015 MY). P0456 - EVAP System Small Leak. P2610 - PCM Internal Engine Off Timer Performance. P2299 - Brake Pedal Position / Accelerator Pedal Position Incompatible. P0335 - Crankshaft Position Sensor Circuit(2014-2015 MY). U0140 - Lost Communication With Body Control Module(LC, LD and LX). P1621 - O2 Sensor Reference Voltage Circuit Low. P1622 - O2 Sensor Reference Voltage Circuit High. P0606 - Internal Control Processor. P0300 - Multiple Cylinder Misfire. P219A - Bank 1 Air-Fuel Ratio Imbalance. P219B - Bank 2 Air-Fuel Ratio Imbalance. P0307 - Cylinder 7 Misfire. P2096 - Downstream Fuel Trim System 1 Lean. P2097 - Downstream Fuel Trim System 1 Rich. The following software enhancements are also available(2015 MY):Reverse gear lock-out change from 16 kph (10 mph) to 4.8 kph (3 mph)(Sales Code EZC with DEC). Change to purge vapor control calibration(Sales Code EZH with DGJ). Improvements to vehicle overspeed control(Sales Code EZH with DGJ). Calibration update to the electronic voltage regulator voltage set point(Sales Code EZH with DGJ). Additional Symptoms:Customers with a Pursuit Dodge Charger (LD) may describe an unpleasant odor in the vehicle under certain extreme ambient conditions2013-2015 MY LD with (Sales Codes EZH with AHB or AHV only). Technicians may find that the original vehicle Frequency Operated Button Integrated Key (FOBIK) does not function properly following replacement of the Wireless Ignition Node (WIN/WCM). The Secret Key information stored in the PCM may be corrupt. This update will restore the PCM?s ability to store/transfer valid Secret Key information
Source components: ELECTRICAL SYSTEM · ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE.
Source record 10180287 at NHTSANHTSA communication ID: 10221813
NHTSA source summary · Original PDF not reviewed by Recallfolio
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle
Source components: ELECTRICAL SYSTEM:IGNITION · UNKNOWN OR OTHER.
Source record 10221813 at NHTSANHTSA communication ID: 10180203
NHTSA source summary · Original PDF not reviewed by Recallfolio
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 10180203 at NHTSANHTSA communication ID: 10223559
NHTSA source summary · Original PDF not reviewed by Recallfolio
Blind Spot Or Park Assist Warnings, False Activation
Source components: LANE DEPARTURE: BLIND SPOT DETECTION.
Source record 10223559 at NHTSANHTSA communication ID: 10177504
NHTSA source summary · Original PDF not reviewed by Recallfolio
Blind Spot Or Park Assist Warnings, False Activation
Source components: ELECTRICAL SYSTEM:ADAS:BLINDSPOT:WARNING:LAMP · ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:WARNING.
Source record 10177504 at NHTSANHTSA communication ID: 10175743
NHTSA source summary · Original PDF not reviewed by Recallfolio
Disinfectant Solution Recommended for COVID-19
Source components: EQUIPMENT · STRUCTURE.
Source record 10175743 at NHTSANHTSA communication ID: 10175735
NHTSA source summary · Original PDF not reviewed by Recallfolio
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10175735 at NHTSANHTSA communication ID: 10175733
NHTSA source summary · Original PDF not reviewed by Recallfolio
Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
Source components: FUEL SYSTEM, GASOLINE.
Source record 10175733 at NHTSANHTSA communication ID: 10175712
NHTSA source summary · Original PDF not reviewed by Recallfolio
Emissions Recall UB4 Evaporative Emissions Canister
Source components: ENGINE · FUEL/PROPULSION SYSTEM.
Source record 10175712 at NHTSANHTSA communication ID: 10175501
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speed Control Operates Intermittently
Source components: VEHICLE SPEED CONTROL.
Source record 10175501 at NHTSANHTSA communication ID: 10175088
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speed Control Operates Intermittently
Source components: VEHICLE SPEED CONTROL.
Source record 10175088 at NHTSANHTSA communication ID: 10174168
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speed Control Operates Intermittently
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · EQUIPMENT:ELECTRICAL.
Source record 10174168 at NHTSANHTSA communication ID: 10175522
NHTSA source summary · Original PDF not reviewed by Recallfolio
Revised Emissions Recall UB4 Evaporative Emissions Canister
Source components: ENGINE AND ENGINE COOLING.
Source record 10175522 at NHTSANHTSA communication ID: 10175109
NHTSA source summary · Original PDF not reviewed by Recallfolio
Revised Emissions Recall UB4 Evaporative Emissions Canister
Source components: ENGINE AND ENGINE COOLING.
Source record 10175109 at NHTSANHTSA communication ID: 10174189
NHTSA source summary · Original PDF not reviewed by Recallfolio
Revised Emissions Recall UB4 Evaporative Emissions Canister
Source components: ENGINE · FUEL/PROPULSION SYSTEM.
Source record 10174189 at NHTSANHTSA communication ID: 10173339
NHTSA source summary · Original PDF not reviewed by Recallfolio
Revised Emissions Recall UB4 Evaporative Emissions Canister
Source components: ENGINE.
Source record 10173339 at NHTSANHTSA communication ID: 10170314
NHTSA source summary · Original PDF not reviewed by Recallfolio
Air Suspension Components Star Parts Catalog has been updated to show individual service parts for the compressor assembly. This will allow service technicians to repair the root cause without over repairing the system. Replace only the part deemed failed by the diagnostics performed. Individual parts include: - Compressor - Valve block - Individual hoses - Temp sensor - Shield - Air line clips NOTE: in most situations when a new compressor is needed, the compressor as a separate part is the correct repair, and the assembly would not be required.
Source components: SUSPENSION.
Source record 10170314 at NHTSANHTSA communication ID: 10220101
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Source components: STRUCTURE.
Source record 10220101 at NHTSANHTSA communication ID: 10220099
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Source components: STRUCTURE.
Source record 10220099 at NHTSANHTSA communication ID: 10220098
NHTSA source summary · Original PDF not reviewed by Recallfolio
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
Source components: VISIBILITY.
Source record 10220098 at NHTSANHTSA communication ID: 10220097
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Source components: EQUIPMENT · STRUCTURE.
Source record 10220097 at NHTSANHTSA communication ID: 10169249
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Source components: EQUIPMENT · STRUCTURE.
Source record 10169249 at NHTSANHTSA communication ID: 10169247
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Source components: EQUIPMENT.
Source record 10169247 at NHTSANHTSA communication ID: 10169246
NHTSA source summary · Original PDF not reviewed by Recallfolio
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
Source components: VISIBILITY.
Source record 10169246 at NHTSANHTSA communication ID: 10169245
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Source components: STRUCTURE.
Source record 10169245 at NHTSANHTSA communication ID: 10166537
NHTSA source summary · Original PDF not reviewed by Recallfolio
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10166537 at NHTSANHTSA communication ID: 10162471
NHTSA source summary · Original PDF not reviewed by Recallfolio
ACTUATOR, A/C and Heater Before replacing HVAC actuator, please contact either Thomas Conway (248) 635-7090 or Paul Aquino (248) 854-4819. Engineering is looking to gather infomation on fail mode and customer concern. If no response in 15 minutes, proceed with repair.
Source components: EQUIPMENT · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10162471 at NHTSANHTSA communication ID: 10162466
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Filter Adapter If replacing Oil Filter Adapter due to oil leak, please be aware a seal kit is available for repair. If replacing due to missing Spring Loaded Check Valve, a replacement spring and check valve are now available through MOPAR.
Source components: ENGINE · EQUIPMENT.
Source record 10162466 at NHTSANHTSA communication ID: 10217484
NHTSA source summary · Original PDF not reviewed by Recallfolio
Servicing Lower Control Arm Inner Pivot Bushings This bulletin discusses replacement of the lower control arm inner pivot bushings.
Source components: SUSPENSION · SUSPENSION:FRONT:CONTROL ARM:LOWER ARM.
Source record 10217484 at NHTSANHTSA communication ID: 10216303
NHTSA source summary · Original PDF not reviewed by Recallfolio
Servicing Lower Control Arm Inner Pivot Bushings This bulletin discusses replacement of the lower control arm inner pivot bushings.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SUSPENSION.
Source record 10216303 at NHTSANHTSA communication ID: 10224877
NHTSA source summary · Original PDF not reviewed by Recallfolio
5.7L Cold End Exhaust RH Side (Resonator & Muffler) Engineering is currently investigating an issue where the back-end exhaust system (resonator and muffler right hand assembly) cracks at or around the weld near the muffler with Model Year '13, '14, '16, and '17 Charger and Challenger 5.7L. Please call Design Release Engineer Jeff Robinson at cell phone (315) 408-6055 and send a photo of the part to him at Jeff.Robinson@fcagroup.com. If no response in 15 minutes, please proceed with repair.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10224877 at NHTSANHTSA communication ID: 10219830
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
Source components: VISIBILITY:WINDSHIELD WIPER/WASHER.
Source record 10219830 at NHTSANHTSA communication ID: 10217521
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
Source components: FUEL SYSTEM, GASOLINE.
Source record 10217521 at NHTSANHTSA communication ID: 10139989
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
Source components: ENGINE AND ENGINE COOLING.
Source record 10139989 at NHTSANHTSA communication ID: 10139978
NHTSA source summary · Original PDF not reviewed by Recallfolio
Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Source components: SEAT BELTS.
Source record 10139978 at NHTSANHTSA communication ID: 10139985
NHTSA source summary · Original PDF not reviewed by Recallfolio
Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Source components: SEAT BELTS.
Source record 10139985 at NHTSANHTSA communication ID: 10223834
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination or a less than desired powertrain response when operating their vehicles in high ambient temperatures. Upon further investigation the technician may find one or more of the following DTCs have been set: P0335 - Crankshaft Position Sensor Circuit. P2610 - PCM Internal Engine Off Timer Performance. (Sales Code ERB). (LD, LX vehicles only). P0606 - Internal Control Processor.
Source components: POWER TRAIN.
Source record 10223834 at NHTSANHTSA communication ID: 10220460
NHTSA source summary · Original PDF not reviewed by Recallfolio
Powertrain diagnostic and system enhancement.
Source components: POWER TRAIN.
Source record 10220460 at NHTSANHTSA communication ID: 10223855
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
Source components: VISIBILITY/WIPER.
Source record 10223855 at NHTSANHTSA communication ID: 10217741
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination or a less than desired powertrain response when operating their vehicles in high ambient temperatures. Upon further investigation the technician may find one or more of the following DTCs have been set: · **P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance. · P0456 - EVAP System Small Leak (Sales Code ERB).** · U0140 - Lost Communication With Body Control Module - (BCM) (VF, LD, LX vehicles only). · P0606 - Internal Control Processor.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT · POWER TRAIN.
Source record 10217741 at NHTSANHTSA communication ID: 10135117
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination or a less than desired powertrain response when operating their vehicles in high ambient temperatures. Upon further investigation the technician may find one or more of the following DTCs have been set: · **P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance. · P0456 - EVAP System Small Leak (Sales Code ERB).** · U0140 - Lost Communication With Body Control Module - (BCM) (VF, LD, LX vehicles only). · P0606 - Internal Control Processor.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · POWER TRAIN.
Source record 10135117 at NHTSANHTSA communication ID: 10129032
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination or a less than desired powertrain response when operating their vehicles in high ambient temperatures. Upon further investigation the technician may find one or more of the following DTCs have been set: · **P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance. · P0456 - EVAP System Small Leak (Sales Code ERB).** · U0140 - Lost Communication With Body Control Module - (BCM) (VF, LD, LX vehicles only). · P0606 - Internal Control Processor.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10129032 at NHTSANHTSA communication ID: 10121702
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. · **P0456 - EVAP System Small Leak (Sales Code ERB).** · U0140 - Lost Communication With Body Control Module - (BCM) (VF, LD, LX vehicles only). · P0606 - Internal Control Processor.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10121702 at NHTSANHTSA communication ID: 10121676
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 5.7L Diagnostic And System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): · **P0456 - Evap System Small Leak. · P2610 - PCM Internal Engine Off Timer Performance. · P2299 - Brake Pedal Position / Accelerator Pedal Position Incompatible. · P0335 - Crankshaft Position Sensor Circuit. (2014-2015 MY).** · U0140 - Lost Communication With Body Control Module. (LC, LD and LX). · P1621 - O2 Sensor Reference Voltage Circuit Low. · P1622 - O2 Sensor Reference Voltage Circuit High. · P0606 - Internal Control Processor. · P0300 - Multiple Cylinder Misfire. · P219A - Bank 1 Air-Fuel Ratio Imbalance. · P219B - Bank 2 Air-Fuel Ratio Imbalance. · P0307 - Cylinder 7 Misfire. · P2096 - Downstream Fuel Trim System 1 Lean. · P2097 - Downstream Fuel Trim System 1 Rich.
Source components: ELECTRICAL SYSTEM · POWER TRAIN · STRUCTURE.
Source record 10121676 at NHTSANHTSA communication ID: 10228120
NHTSA source summary · Original PDF not reviewed by Recallfolio
Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
Source components: BACK OVER PREVENTION · EQUIPMENT · POWER TRAIN.
Source record 10228120 at NHTSANHTSA communication ID: 10181486
NHTSA source summary · Original PDF not reviewed by Recallfolio
Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
Source components: EQUIPMENT · POWER TRAIN.
Source record 10181486 at NHTSANHTSA communication ID: 10141286
NHTSA source summary · Original PDF not reviewed by Recallfolio
Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
Source components: POWER TRAIN:MANUAL TRANSMISSION.
Source record 10141286 at NHTSANHTSA communication ID: 10218303
NHTSA source summary · Original PDF not reviewed by Recallfolio
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL.
Source record 10218303 at NHTSANHTSA communication ID: 10140254
NHTSA source summary · Original PDF not reviewed by Recallfolio
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM) · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10140254 at NHTSANHTSA communication ID: 10139956
NHTSA source summary · Original PDF not reviewed by Recallfolio
Adaptive Cruise Control Sensor 1) If you are replacing this part due to the cluster displaying Clean Radar Sensor in Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure
Source components: VEHICLE SPEED CONTROL:CRUISE CONTROL.
Source record 10139956 at NHTSANHTSA communication ID: 10121927
NHTSA source summary · Original PDF not reviewed by Recallfolio
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
Source components: ENGINE AND ENGINE COOLING.
Source record 10121927 at NHTSANHTSA communication ID: 10218134
NHTSA source summary · Original PDF not reviewed by Recallfolio
Powertrain Diagnostic And System Enhancements.
Source components: POWER TRAIN.
Source record 10218134 at NHTSANHTSA communication ID: 10160029
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 6.4L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0122 - Throttle Position Sensor 1 Circuit Low. ? P0123 - Throttle Position Sensor 1 Circuit High. ? P0222 - Throttle Position Sensor 2 Circuit Low. ? P0223 - Throttle Position Sensor 2 Circuit High. ? U0140 - Lost Communication With Body Control Module (Attempting to clear this DTC will be unsuccessful).
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
Source record 10160029 at NHTSANHTSA communication ID: 10074947
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10074947 at NHTSANHTSA communication ID: 10159953
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 5.7L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience one or more of the following symptoms or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the Powertrain Control Module (PCM): ? U0140 - Lost Communication With Body Control Module (LD and LX). ? U0140 - Lost Communication With Body Control Module (TIPM) stored in the Engine Control Module (ECM) memory (LC vehicles). ? P1621 - O2 Sensor Reference Voltage Circuit Low. ? P1622 - O2 Sensor Reference Voltage Circuit High. ? P0606 - Internal Control Processor. ? P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1. ? P0300 - Multiple Cylinder Misfire (applies only to vehicles using a block heater in ambient temperatures greater than -20°F (-29°C). ? Technicians may find that the original vehicle Frequency Operated Button Integrated Key (FOBIK) does not function properly following replacement of the Wireless Ignition Node (WIN/WCM). The Secret Key information stored in the PCM may be corrupt. This update will restore the PCM?s ability to store/transfer valid Secret Key information (LC vehicles). ? Accuracy improvements for the Automatic Oil Change Indicator (AOCI) system.
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN.
Source record 10159953 at NHTSA