108463
NHTSA communication ID: 11025727
NHTSA source summary · Original PDF not reviewed by Recallfolio
PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
Source components: SERVICE BRAKES.
Source record 11025727 at NHTSAThe manufacturer’s record · Page 1 of 2
2012 Dodge CARAVAN
Manufacturer communications & TSBs.Page 1
Original record summaries, dates and identifiers for this model-year. Records 1–100 of 150, ordered newest first. Dated records on this page: Apr 23, 2014–Nov 18, 2025.
Back to 2012 Dodge CARAVAN problems & recallsRead the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
108464
NHTSA communication ID: 11025724
NHTSA source summary · Original PDF not reviewed by Recallfolio
PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
Source components: SERVICE BRAKES.
Source record 11025724 at NHTSA103617
NHTSA communication ID: 11016138
NHTSA source summary · Original PDF not reviewed by Recallfolio
STARTER - ENGINE
Source components: ENGINE.
Source record 11016138 at NHTSA9100456
NHTSA communication ID: 11010954
NHTSA source summary · Original PDF not reviewed by Recallfolio
Incoming Vehicles with Deployed Active Head Rest (AHR) should have a through enquiry. If there is no Broken Pieces or Electrical failure, Direction to RESET the AHR following the Procedure.
Source components: SEATS.
Source record 11010954 at NHTSA9100229
NHTSA communication ID: 10248517
NHTSA source summary · Original PDF not reviewed by Recallfolio
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
Source components: EQUIPMENT.
Source record 10248517 at NHTSA9100229
NHTSA communication ID: 10244356
NHTSA source summary · Original PDF not reviewed by Recallfolio
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
Source components: SUSPENSION.
Source record 10244356 at NHTSA9100226
NHTSA communication ID: 10248509
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Source components: ELECTRICAL SYSTEM.
Source record 10248509 at NHTSA9100226
NHTSA communication ID: 10244348
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10244348 at NHTSA9100196
NHTSA communication ID: 10242717
NHTSA source summary · Original PDF not reviewed by Recallfolio
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10242717 at NHTSA1804823
NHTSA communication ID: 10236933
NHTSA source summary · Original PDF not reviewed by Recallfolio
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10236933 at NHTSA3100122
NHTSA communication ID: 10229572
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE.
Source record 10229572 at NHTSA3100122
NHTSA communication ID: 10225424
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE.
Source record 10225424 at NHTSA3100122
NHTSA communication ID: 10225287
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE · STRUCTURE:INTERIOR PANELS:DOOR · UNKNOWN OR OTHER.
Source record 10225287 at NHTSA9004206
NHTSA communication ID: 10221375
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - Feb 28, 2019 VF. - Only use R8453637A$ or R8599680A$ for March 1, 2019 and later VF as they have the revised park system. - R8453637A$ and R8599680A$ are physically and functionally equivalent. Installing a R8453637A$ or R8599680A$ in a 2014 - Feb 28, 2019 VF will result in a core with the original park system being returned. Mopar can no longer convert 62TE core with the original park system to the March 1, 2019 and later version. Continued mis-usage will exacerbate the existing core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when
Source components: POWER TRAIN.
Source record 10221375 at NHTSAS2209000004
NHTSA communication ID: 10227983
NHTSA source summary · Original PDF not reviewed by Recallfolio
If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10227983 at NHTSA9004509
NHTSA communication ID: 10212248
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:FILTER/SCREEN.
Source record 10212248 at NHTSA9004206
NHTSA communication ID: 10228975
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
Source components: PARKING BRAKE · POWER TRAIN · STRUCTURE.
Source record 10228975 at NHTSA9004206
NHTSA communication ID: 10223014
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
Source components: PARKING BRAKE · POWER TRAIN · STRUCTURE.
Source record 10223014 at NHTSA9004206
NHTSA communication ID: 10220631
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
Source components: PARKING BRAKE · POWER TRAIN · STRUCTURE.
Source record 10220631 at NHTSA9004206
NHTSA communication ID: 10212234
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
Source components: PARKING BRAKE · POWER TRAIN · STRUCTURE.
Source record 10212234 at NHTSAS2109000004
NHTSA communication ID: 10230180
NHTSA source summary · Original PDF not reviewed by Recallfolio
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
Source components: ENGINE AND ENGINE COOLING.
Source record 10230180 at NHTSAS2109000004
NHTSA communication ID: 10221594
NHTSA source summary · Original PDF not reviewed by Recallfolio
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
Source components: ENGINE AND ENGINE COOLING.
Source record 10221594 at NHTSAS2008000113
NHTSA communication ID: 10221154
NHTSA source summary · Original PDF not reviewed by Recallfolio
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
Source components: ELECTRICAL SYSTEM.
Source record 10221154 at NHTSAS2008000113 Rev.
NHTSA communication ID: 10194007
NHTSA source summary · Original PDF not reviewed by Recallfolio
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
Source components: POWER TRAIN.
Source record 10194007 at NHTSAS1821000001
NHTSA communication ID: 10221150
NHTSA source summary · Original PDF not reviewed by Recallfolio
Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
Source components: POWER TRAIN.
Source record 10221150 at NHTSA9004206
NHTSA communication ID: 10221098
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 3. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 4. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
Source components: PARKING BRAKE · POWER TRAIN · STRUCTURE.
Source record 10221098 at NHTSA9004009
NHTSA communication ID: 10221097
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Source components: POWER TRAIN.
Source record 10221097 at NHTSA9004206
NHTSA communication ID: 10193951
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 3. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 4. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
Source components: PARKING BRAKE · POWER TRAIN · STRUCTURE.
Source record 10193951 at NHTSAS2121000005
NHTSA communication ID: 10221123
NHTSA source summary · Original PDF not reviewed by Recallfolio
62TE 6-Speed Transmission Cracked Torque Converter (TC) Piston Repair Index, To Aid In Diagnosis And Repair
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
Source record 10221123 at NHTSAS2121000005
NHTSA communication ID: 10193976
NHTSA source summary · Original PDF not reviewed by Recallfolio
62TE 6-Speed Transmission Cracked Torque Converter (TC) Piston Repair Index, To Aid In Diagnosis And Repair
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
Source record 10193976 at NHTSA23-030-20 REV. A
NHTSA communication ID: 10187682
NHTSA source summary · Original PDF not reviewed by Recallfolio
Active Head Restraint (AHR) Inadvertent Deployment - X87 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SEATS.
Source record 10187682 at NHTSA70324
NHTSA communication ID: 10224066
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Bulletin D-20-19 (X87) Active Head Restraint - Select 2012-2017 Dodge Grand Caravan (RT) (Rev. A)
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · SEATS.
Source record 10224066 at NHTSA70324
NHTSA communication ID: 10184744
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Bulletin D-20-19 (X87) Active Head Restraint - Select 2012-2017 Dodge Grand Caravan (RT) (Rev. A)
Source components: SEATS:MID/REAR ASSEMBLY:HEAD RESTRAINT.
Source record 10184744 at NHTSA70324
NHTSA communication ID: 10184444
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Bulletin D-20-19 (X87) Active Head Restraint - Select 2012-2017 Dodge Grand Caravan (RT) (Rev. A)
Source components: SEATS:FRONT ASSEMBLY:HEAD RESTRAINT · SEATS:MID/REAR ASSEMBLY:HEAD RESTRAINT.
Source record 10184444 at NHTSA69920
NHTSA communication ID: 10224060
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Bulletin D-20-19 (X87) Active Head Restraint - Select 2010-2017 Dodge Grand Caravan (RT)
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · SEATS.
Source record 10224060 at NHTSA69920
NHTSA communication ID: 10184738
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Bulletin D-20-19 (X87) Active Head Restraint - Select 2010-2017 Dodge Grand Caravan (RT)
Source components: SEATS:MID/REAR ASSEMBLY:HEAD RESTRAINT.
Source record 10184738 at NHTSA69920
NHTSA communication ID: 10184438
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Bulletin D-20-19 (X87) Active Head Restraint - Select 2010-2017 Dodge Grand Caravan (RT)
Source components: EQUIPMENT · SEATS:FRONT ASSEMBLY:HEAD RESTRAINT · SEATS:MID/REAR ASSEMBLY:HEAD RESTRAINT.
Source record 10184438 at NHTSA2303020
NHTSA communication ID: 10224077
NHTSA source summary · Original PDF not reviewed by Recallfolio
Active Head Restraint (AHR) Inadvertent Deployment - X87 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.
Source components: SEATS.
Source record 10224077 at NHTSA23-030-20
NHTSA communication ID: 10184755
NHTSA source summary · Original PDF not reviewed by Recallfolio
Active Head Restraint (AHR) Inadvertent Deployment - X87 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.
Source components: EQUIPMENT · SEATS.
Source record 10184755 at NHTSA23-030-20
NHTSA communication ID: 10184455
NHTSA source summary · Original PDF not reviewed by Recallfolio
Active Head Restraint (AHR) Inadvertent Deployment - X87 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SEATS.
Source record 10184455 at NHTSA9004300
NHTSA communication ID: 10181504
NHTSA source summary · Original PDF not reviewed by Recallfolio
Cooler line, Power steering return The clips that hold the line to the core support are not available at this time and will need to be reused. Use care when opening and re-latching clip.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM · ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS · STEERING.
Source record 10181504 at NHTSAS1121000006RevA
NHTSA communication ID: 10221831
NHTSA source summary · Original PDF not reviewed by Recallfolio
(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:TRANSMISSION CASE/HOUSING.
Source record 10221831 at NHTSAS1121000006 Rev.
NHTSA communication ID: 10180221
NHTSA source summary · Original PDF not reviewed by Recallfolio
(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
Source components: ELECTRICAL SYSTEM · ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10180221 at NHTSAS2008000113
NHTSA communication ID: 10221813
NHTSA source summary · Original PDF not reviewed by Recallfolio
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle
Source components: ELECTRICAL SYSTEM:IGNITION · UNKNOWN OR OTHER.
Source record 10221813 at NHTSAS2008000113
NHTSA communication ID: 10180203
NHTSA source summary · Original PDF not reviewed by Recallfolio
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 10180203 at NHTSA9004206
NHTSA communication ID: 10176476
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 3. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 4. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
Source components: ENGINE · POWER TRAIN.
Source record 10176476 at NHTSA23-015-20
NHTSA communication ID: 10175743
NHTSA source summary · Original PDF not reviewed by Recallfolio
Disinfectant Solution Recommended for COVID-19
Source components: EQUIPMENT · STRUCTURE.
Source record 10175743 at NHTSA08-049-20
NHTSA communication ID: 10175735
NHTSA source summary · Original PDF not reviewed by Recallfolio
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10175735 at NHTSA18-039-20
NHTSA communication ID: 10175733
NHTSA source summary · Original PDF not reviewed by Recallfolio
Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
Source components: FUEL SYSTEM, GASOLINE.
Source record 10175733 at NHTSAS1508000480
NHTSA communication ID: 10175501
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speed Control Operates Intermittently
Source components: VEHICLE SPEED CONTROL.
Source record 10175501 at NHTSAS1508000480
NHTSA communication ID: 10175088
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speed Control Operates Intermittently
Source components: VEHICLE SPEED CONTROL.
Source record 10175088 at NHTSAS1508000480
NHTSA communication ID: 10174168
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speed Control Operates Intermittently
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · EQUIPMENT:ELECTRICAL.
Source record 10174168 at NHTSA9004022
NHTSA communication ID: 10170314
NHTSA source summary · Original PDF not reviewed by Recallfolio
Air Suspension Components Star Parts Catalog has been updated to show individual service parts for the compressor assembly. This will allow service technicians to repair the root cause without over repairing the system. Replace only the part deemed failed by the diagnostics performed. Individual parts include: - Compressor - Valve block - Individual hoses - Temp sensor - Shield - Air line clips NOTE: in most situations when a new compressor is needed, the compressor as a separate part is the correct repair, and the assembly would not be required.
Source components: SUSPENSION.
Source record 10170314 at NHTSA3100519
NHTSA communication ID: 10220101
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Source components: STRUCTURE.
Source record 10220101 at NHTSA3100319
NHTSA communication ID: 10220099
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Source components: STRUCTURE.
Source record 10220099 at NHTSA3100419
NHTSA communication ID: 10220098
NHTSA source summary · Original PDF not reviewed by Recallfolio
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
Source components: VISIBILITY.
Source record 10220098 at NHTSA3100619
NHTSA communication ID: 10220097
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Source components: EQUIPMENT · STRUCTURE.
Source record 10220097 at NHTSA31-005-19
NHTSA communication ID: 10169249
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Source components: EQUIPMENT · STRUCTURE.
Source record 10169249 at NHTSA31-003-19
NHTSA communication ID: 10169247
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Source components: EQUIPMENT.
Source record 10169247 at NHTSA31-004-19
NHTSA communication ID: 10169246
NHTSA source summary · Original PDF not reviewed by Recallfolio
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
Source components: VISIBILITY.
Source record 10169246 at NHTSA31-006-19
NHTSA communication ID: 10169245
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Source components: STRUCTURE.
Source record 10169245 at NHTSA9003220
NHTSA communication ID: 10166537
NHTSA source summary · Original PDF not reviewed by Recallfolio
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10166537 at NHTSA9002706
NHTSA communication ID: 10162475
NHTSA source summary · Original PDF not reviewed by Recallfolio
VALVE KIT, A/C Expansion For concern of noise while AC is running, prior to replacing this part, please call Thomas Rolo at (248) 931-0484. If no response in 15 minutes, proceed with repair.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10162475 at NHTSA9004076
NHTSA communication ID: 10162466
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Filter Adapter If replacing Oil Filter Adapter due to oil leak, please be aware a seal kit is available for repair. If replacing due to missing Spring Loaded Check Valve, a replacement spring and check valve are now available through MOPAR.
Source components: ENGINE · EQUIPMENT.
Source record 10162466 at NHTSA9003109
NHTSA communication ID: 10219830
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
Source components: VISIBILITY:WINDSHIELD WIPER/WASHER.
Source record 10219830 at NHTSA9003694
NHTSA communication ID: 10217521
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
Source components: FUEL SYSTEM, GASOLINE.
Source record 10217521 at NHTSA9003694
NHTSA communication ID: 10139989
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
Source components: ENGINE AND ENGINE COOLING.
Source record 10139989 at NHTSA9003687
NHTSA communication ID: 10139978
NHTSA source summary · Original PDF not reviewed by Recallfolio
Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Source components: SEAT BELTS.
Source record 10139978 at NHTSA9003681
NHTSA communication ID: 10139985
NHTSA source summary · Original PDF not reviewed by Recallfolio
Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Source components: SEAT BELTS.
Source record 10139985 at NHTSA05152029
NHTSA communication ID: 10223855
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
Source components: VISIBILITY/WIPER.
Source record 10223855 at NHTSAR4880213A
NHTSA communication ID: 10217600
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shaft - Axle Half Note: The joint between the splines on the halfshaft and the hub and bearing is an interference fit. The halfshaft nut is to be used to draw the hub and bearing onto the halfshaft splines. This is particularly true if hub and bearing is also being replaced.~
Source components: POWER TRAIN.
Source record 10217600 at NHTSAR4880213A$
NHTSA communication ID: 10140110
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shaft - Axle Half Note: The joint between the splines on the halfshaft and the hub and bearing is an interference fit. The halfshaft nut is to be used to draw the hub and bearing onto the halfshaft splines. This is particularly true if hub and bearing is also being replaced.~
Source components: POWER TRAIN.
Source record 10140110 at NHTSAR4880213A$
NHTSA communication ID: 10080209
NHTSA source summary · Original PDF not reviewed by Recallfolio
"SHAFT - AXLE HALF NOTE: THE JOINT BETWEEN THE SPLINES ON THE HALFSHAFT AND THE HUB AND BEARING IS AN INTERFERENCE FIT. THE HALFSHAFT NUT IS TO BE USED TO DRAW THE HUB AND BEARING ONTO THE HALFSHAFT SPLINES. THIS IS PARTICULARLY TRUE IF HUB AND BEARING IS ALSO BEING REPLACED"
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10080209 at NHTSAZ5091195A
NHTSA communication ID: 10218303
NHTSA source summary · Original PDF not reviewed by Recallfolio
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL.
Source record 10218303 at NHTSAZ5091195A$
NHTSA communication ID: 10140254
NHTSA source summary · Original PDF not reviewed by Recallfolio
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM) · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10140254 at NHTSA68277402A
NHTSA communication ID: 10139956
NHTSA source summary · Original PDF not reviewed by Recallfolio
Adaptive Cruise Control Sensor 1) If you are replacing this part due to the cluster displaying Clean Radar Sensor in Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure
Source components: VEHICLE SPEED CONTROL:CRUISE CONTROL.
Source record 10139956 at NHTSA0803116
NHTSA communication ID: 10215071
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hands Free Module Prompts Begin Erroneously.
Source components: ELECTRICAL SYSTEM.
Source record 10215071 at NHTSA08-031-16
NHTSA communication ID: 10138948
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hands Free Module Prompts Begin Erroneously This bulletin involves diagnosing and based on outcome, either performing a USB flash or replacing the Mopar accessory Hands Free Module (HFM). A customer may experience the Uconnect prompts begin to play without pressing the Voice Recognition (VR) button. The prompt may repeat itself two or three times before exiting. The customer satisfaction enhancements are included with this software release. NOTE: After the HFM has been updated it will receive these enhancements: · Reduced ?Device Reading? wait time after connecting a device to the remote USB port. · Call / dial separation improves upon names being recognized as phone numbers. · Improved sound quality during Bluetooth streaming. · Increased iPod and iPhone compatibility. · SMS messaging support via Mobile Application Part (MAP) protocol (not all phones support the MAP protocol). · Added ?None of These? and ?Correction? to the phone book prompt menu for better handling of similar names. · Previous button will return the song currently being played to the beginning of the track. · AirPlay feature ?Dock Connector? no longer needs to be manually selected on Apple devices. This will resolve the ?No Audio? condition when the device is connected to the remote USB port and dock connector is not selected. NOTE: USB mode resume will no longer 'resume' after ignition is OFF.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10138948 at NHTSARL108213A$
NHTSA communication ID: 10121927
NHTSA source summary · Original PDF not reviewed by Recallfolio
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
Source components: ENGINE AND ENGINE COOLING.
Source record 10121927 at NHTSA24-001-16
NHTSA communication ID: 10119637
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: HVAC System Improvements This bulletin involves reprogramming the HVAC Module with new software. The customer may describe one or more of the following conditions: · Feeling hot air coming out of the passenger side vents. · HVAC system intermittently blows cold regardless of blend door/temperature setting.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10119637 at NHTSA1810415
NHTSA communication ID: 10218148
NHTSA source summary · Original PDF not reviewed by Recallfolio
Powertrain Diagnostic And System Enhancements.
Source components: POWER TRAIN.
Source record 10218148 at NHTSA1810415
NHTSA communication ID: 10215182
NHTSA source summary · Original PDF not reviewed by Recallfolio
Powertrain Diagnostic And System Enhancements.
Source components: POWER TRAIN.
Source record 10215182 at NHTSA18-104-15
NHTSA communication ID: 10160039
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 3.6L Powertrain Diagnostic And System Enhancements This bulletin involves flash reprogramming the Powertrain Control Module (PCM) with new software. NOTE: There will be two software packages to choose from. Both software updates will fix all symptoms/conditions listed. One will contain a enhanced accelerator pedal operation and one will not. Refer to the ?Symptoms/Conditions? for a detailed description of the changes. Be sure to consult with the Customer on what software version they prefer, Enhanced Pedal or Standard Pedal. Once the software choice is programmed it is a permanent change. NOTE: There is another software choice available, in addition to addressing all the symptom/conditions listed. This new version of software called Enhanced Pedal has an update to the accelerator pedal operation. This change when applied will make the vehicle more responsive with less pedal input and also take less effort to maintain a constant cruising speed. Be sure to consult with the Customer on what software version they prefer, Enhanced Pedal or Standard Pedal. Once the software choice is programmed it is a permanent change. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC): ? U0140 - Lost Communication With Body Control Module (BCM) ? P0108 - Manifold Absolute Pressure Sensor Circuit High ? P0441 - Evap Purge System Performance ? P06DE - Engine Oil Pressure Control Circuit Stuck On ? P06DA - Engine Oil Pressure Control Circuit ? P0420 - Catalyst Efficiency (Bank 1) sets in temperatures of 85° F (29° C) or higher ? P0430 - Catalyst Efficiency (Bank 2) sets in temperatures of 85° F (29° C) or higher ? P0133 - O2 Sensor 1/1 Slow Response ? P0153 - O2 Sensor 2/1 Slow Response ? P0300 - Multiple Cylinder Misfire ? P0301 - Cylinder 1 Misfire ? P0302 - Cylinder 2 Misfire ? P0303 - Cylinder 3 Misfire
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · EXTERIOR LIGHTING · SERVICE BRAKES, HYDRAULIC · STRUCTURE.
Source record 10160039 at NHTSA18-104-15
NHTSA communication ID: 10074965
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10074965 at NHTSA24-006-15
NHTSA communication ID: 10159915
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: HVAC System Improvements This bulletin involves selectively erasing and reprogramming the HVAC Module with new software. The customer may describe one or more of the following conditions: ? Feeling hot air coming out of the passenger side vents. ? HVAC system intermittently blows cold regardless of blend door/temperature setting.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10159915 at NHTSA08-038-15
NHTSA communication ID: 10150546
NHTSA source summary · Original PDF not reviewed by Recallfolio
RBZ Or RHB Radio Software Enhancements This bulletin involves upgrading the software on the RBZ or RHB Radio. The customer may experience one or more of the following. ? When changing the language on the radio, the navigation may still display English. ? Help prevent navigation lockup. ? Ghost image of the vehicle?s brand logo on the display screen. ? Digital photos loaded onto the hard drive intermittently get lost. ? Sirius audio pop on power up. ? HFM audio pop on power up. ? HFM Mode resume with no information. SYMPTOM/CONDITION FOR RHB RADIOS ONLY: ? Trip planner does not save a route after is was created. ? Route guidance does not activate after the vehicle shuts down. ? Longitude entry does not allow enough digits. ? CD/DVD will not play. ? Navigation accept screen will not clear. ? Navigation shows ?acquiring signal? for an extended period of time. ? New navigation graphics.
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM) · POWER TRAIN.
Source record 10150546 at NHTSA08-034-15
NHTSA communication ID: 10150519
NHTSA source summary · Original PDF not reviewed by Recallfolio
Wire Harness Hanging Down From Rear Bumper Fascia This bulletin involves attaching the park assist and/or blind spot detection wire harness to the rear bumper fascia. The customer may describe a wire harness hanging down from the rear bumper fascia.
Source components: EQUIPMENT:ELECTRICAL · VISIBILITY.
Source record 10150519 at NHTSA9002887
NHTSA communication ID: 10223599
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
Source components: ENGINE AND ENGINE COOLING.
Source record 10223599 at NHTSA2302414
NHTSA communication ID: 10221028
NHTSA source summary · Original PDF not reviewed by Recallfolio
Water In The Jack Storage Area This bulletin involves sealing the left side fascia support flange. The customer may describe water entering the jack storage compartment and/or a wet jack storage bag and/or wet jack storage compartment liner material.
Source components: EQUIPMENT.
Source record 10221028 at NHTSA23-024-14
NHTSA communication ID: 10139748
NHTSA source summary · Original PDF not reviewed by Recallfolio
Water In The Jack Storage Area This bulletin involves sealing the left side fascia support flange. The customer may describe water entering the jack storage compartment and/or a wet jack storage bag and/or wet jack storage compartment liner material.
Source components: EQUIPMENT.
Source record 10139748 at NHTSA23-024-14
NHTSA communication ID: 10064470
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: STRUCTURE:BODY.
Source record 10064470 at NHTSA9002503
NHTSA communication ID: 10220993
NHTSA source summary · Original PDF not reviewed by Recallfolio
RHR Radio Issue Description: Issue 1: While performing RHR radio reflash (software update), on rare occasions, the flash can fail to properly update the radio resulting in the radio running in Emergency IFS mode. This error condition can occur due to interrupting the software update, background radio operations interfering with the reflash process, etc. The radio will reboot, but with limited functionality ( may include but are not limited to: NAV, Voice Recognition, Bluetooth, or AUX jack are inop, no available space shown on HDD, etc.). The radio can still be properly updated by simply reinserting the software update disc and performing the reflash procedure again. To assist in the verification that the radio is running Emergency IFS perform the 1. Power on radio~ 2. Press MENU H/K~ 3. Press System Setup S/K~ 4. Press Manage HDD S/K~ 5. Press Display Available Space on HDD S/K~ 6. When running Emergency IFS, all items under Used, Available, and Capacity report as dashes Issue 2: If you are having troubles connecting a phone or a MP3 player, try removing the battery on the device and then going through the pairing/connection procedure again. If you cannot remove the battery on the device, perform a reboot. Each manufacturer has a different series of buttons to hold down to perform a reboot. If the problem still persists, try the device on another like vehicle with the same radio. If you are having the same connection issues on another like vehicle, the device may be faulty or it may not be compatible with the RHR radio. Go to www.chrysler.com/hostb/crossbrand/owners/en and click on ?Bluetooth Phone Compatibility Test Results? link for a list of phones that are compatible. For MP3 players and media storage devices, only .wma, .aac, .mp3, .sacd, .jpeg & .jpg files are supported. Remove all other file types and reevaluate the concern. Issue 3: If upgrading a vehicle from a low line radio that has factory installed UConnect
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10220993 at NHTSA9002503
NHTSA communication ID: 10139594
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: RHR Radio Issue Description: Issue 1: While performing RHR radio reflash (software update), on rare occasions, the flash can fail to properly update the radio resulting in the radio running in Emergency IFS mode. This error condition can occur due to interrupting the software update, background radio operations interfering with the reflash process, etc. The radio will reboot, but with limited functionality (examples may include but are not limited to: NAV, Voice Recognition, Bluetooth, or AUX jack are inop, no available space shown on HDD, etc.). The radio can still be properly updated by simply reinserting the software update disc and performing the reflash procedure again. To assist in the verification that the radio is running Emergency IFS perform the following:~ 1. Power on radio~2. Press MENU H/K~3. Press System Setup S/K~4. Press Manage HDD S/K~5. Press Display Available Space on HDD S/K~6. When running Emergency IFS, all items under Used, Available, and Capacity report as dashes~ Issue 2: If you are having troubles connecting a phone or a MP3 player, try removing the battery on the device and then going through the pairing/connection procedure again. If you cannot remove the battery on the device, perform a reboot. Each manufacturer has a different series of buttons to hold down to perform a reboot. If the problem still persists, try the device on another like vehicle with the same radio. If you are having the same connection issues on another like vehicle, the device may be faulty or it may not be compatible with the RHR radio. Go to www.chrysler.com/hostb/crossbrand/owners/en and click on ?Bluetooth Phone Compatibility Test Results? link for a list of phones that are compatible. For MP3 players and media storage devices, only .wma, .aac, .mp3, .sacd, .jpeg & .jpg files are supported. Remove all other file types and reevaluate the concern. ~ Issue 3: If upgrading a vehicle from a low line radio that has factory installed UConnect
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · EQUIPMENT · FUEL SYSTEM, GASOLINE · POWER TRAIN · SUSPENSION · VISIBILITY.
Source record 10139594 at NHTSA23-020-14
NHTSA communication ID: 10139690
NHTSA source summary · Original PDF not reviewed by Recallfolio
Sunroof Opens But Will Not Close And/Or Cycles Back To Open And/Or Sunroof Glass Scratched This bulletin involves inspecting sunroof glass clearance and if necessary, modifying the sunroof reinforcement to allow adequate clearance for sunroof glass travel. The customer may experience the sunroof opens but will not close and/or cycles back to open and/or the outer surface of the sunroof glass is scratched.
Source components: VISIBILITY:SUN/MOON ROOF ASSEMBLY.
Source record 10139690 at NHTSA23-020-14
NHTSA communication ID: 10064462
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: VISIBILITY:SUN/MOON ROOF ASSEMBLY.
Source record 10064462 at NHTSA24-004-14 REV. A
NHTSA communication ID: 10217716
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: HVAC System Intermittently Blows Cold Regardless of Setting This bulletin involves selectively erasing and reprogramming the HVAC Module with new software. Customers may experience the following condition: HVAC system intermittently blows cold regardless of blend door/temperature setting.Updating the HVAC software will correct this condition.This SB includes improved software over what was originally released with SB 24-004-14.
Source components: ELECTRICAL SYSTEM · VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.
Source record 10217716 at NHTSA24-004-14 REV. A
NHTSA communication ID: 10141231
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: HVAC System Intermittently Blows Cold Regardless of Setting This bulletin involves selectively erasing and reprogramming the HVAC Module with new software. Customers may experience the following condition: HVAC system intermittently blows cold regardless of blend door/temperature setting.Updating the HVAC software will correct this condition.This SB includes improved software over what was originally released with SB 24-004-14.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10141231 at NHTSA23-014-14
NHTSA communication ID: 10139668
NHTSA source summary · Original PDF not reviewed by Recallfolio
Sliding Door Trim Contacting Vehicle Rear Quarter This bulletin depending on production date, involves either installing or engaging an additional door panel retention point to prevent the door panel from bowing and contacting the body when the sliding door is opened. The customer may experience a door trim panel contacting the quarter panel on either side when opening either of the sliding doors.
Source components: STRUCTURE:BODY:DOOR.
Source record 10139668 at NHTSA23-014-14
NHTSA communication ID: 10063789
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: STRUCTURE:BODY.
Source record 10063789 at NHTSA9003081
NHTSA communication ID: 10229871
NHTSA source summary · Original PDF not reviewed by Recallfolio
Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
Source components: ELECTRICAL SYSTEM.
Source record 10229871 at NHTSA