2001 Chrysler
SEBRINGProblems & recalls

Reported concern

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2001-2002 Chrysler Sebring and Dodge Stratus vehicles, equipped with beige interiors. The affected vehicles were previously repaired for a recall issue using an incorrect part. The incorrect part may not prevent the passenger side sun visor from detaching if the passenger frontal air bag deploys and the passenger side sun visor is folded down in a certain position.

Manufacturer’s stated response

Chrysler will notify the affected owners. Dealers will install the correct tether strap to retain the passenger sun visor, free of charge. The recall began July 26, 2016, owners will be sent a second email when parts are available. Owners may contact Chrysler customer service at 1-800-853-1403.

Reported concern

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2000-2005 Eclipse vehicles manufactured April 5, 1999, to December 17, 2004, 2001-2005 Eclipse Spyder vehicles manufactured January 19, 2000, to March 18, 2005, 2001-2005 Chrysler Sebring vehicles manufactured April 17, 2000, to February 21, 2005, and 2001-2005 Dodge Stratus vehicles manufactured April 17, 2000, to February 22, 2005. In the affected vehicles, the passenger side sun visor may be folded down in such a position that, if the passenger frontal air bag deploys, the passenger side sun visor may detach.

Manufacturer’s stated response

MMNA will notify their owners, and Chrysler will notify the Chrysler and Dodge owners. Dealers will install a tether strap to retain the passenger sun visor, free of charge. The recall began on July 20, 2015. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-15-005. Chrysler and Dodge owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R30.

Manufacturer campaign: SR-15-005 (FCA R30)

Reported concern

QUALIS AUTOMOTIVE IS RECALLING CERTAIN AFTERMARKET BALL JOINTS SOLD FOR USE ON CERTAIN PASSENGER VEHICLES. THE SOCKET MAY HAVE BEEN EXCESSIVELY HARDENED WHICH COULD CAUSE IT TO CRACK NEAR THE RETAINING RING GROOVE ALLOWING THE BALL STUD TO SEPARATE UNDER IMPACT LOAD. THE SUBJECT BALL JOINTS WERE SOLD AS FOUR PART NUMBERS, D10945, D10946, G10945, AND G10946. THE AFFECTED CONTROL ARMS, D10945 AND D10946, ARE STAMPED WITH THE FOLLOWING DATES ON THE BALL JOINTS: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, AND 116609. THE G10945 AND G10946 ARE THE SAME PART AS THE D10945 AND D10946 RESPECTIVELY. THEY ARE LABELED DIFFERENTLY DEPENDING ON THE AFTERMARKET CUSTOMER.

Manufacturer’s stated response

QUALIS AUTOMOTIVE WILL REPLACE THE BALL JOINTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2009. OWNERS MAY CONTACT QUALIS AUTOMOTIVE AT 1-800-493-4128.

Reported concern

SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Manufacturer’s stated response

SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.

Reported concern

CERTAIN CARDONE MASTER CYLINDERS WITH PART NUMBERS 10-2925, 10-2987, 10-2987MZA, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, AND 11-3156, AND WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID.

Manufacturer’s stated response

CARDONE WILL NOTIFY OWNERS AND OFFER TO REPURCHASE ANY DEFECTIVE MASTER CYLINDERS. THE RECALL BEGAN DURING APRIL 2007. OWNERS CAN CONTACT CARDONE AT 1-800-777-4780.

Reported concern

VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS. A HOSE MANUFACTURING PROCESS ALLOWED THE REINFORCEMENT YARD TO BREACH THE INNER LAYER OF SOME AUTOMATIC TRANSMISSION HOSES WEAKENING THE INNER WALL WHICH COULD RESULT IN LEAKAGE OF THE AUTOMATIC TRANSMISSION FLUID.

Manufacturer’s stated response

DEALERS WILL REPLACE THE TRANSAXLE OIL COOLER HOSES. OWNER NOTIFICATION BEGAN APRIL 9, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.

Manufacturer campaign: 969

Reported concern

VEHICLE DESCRIPTION: PASSENGER VEHICLES. A NUMBER OF INCORRECT DRIVER SIDE SEAT MOUNTING BOLTS WERE INSTALLED INTO VEHICLES.

Manufacturer’s stated response

DEALERS WILL INSPECT THE SEAT MOUNTING BOLTS AND THEN REPLACE THE BOLTS IF NECESSARY. OWNER NOTIFICATION BEGAN FEBRUARY 5, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.

Manufacturer campaign: 968

Reported concern

VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, PICKUP TRUCKS AND SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." SOME OF THE OWNER'S MANUALS FOR THESE VEHICLES ARE MISSING INSTRUCTIONS THAT PROVIDE A STEP-BY-STEP PROCEDURE, INCLUDING DIAGRAMS, FOR PROPERLY ATTACHING A CHILD RESTRAINT SYSTEM'S TETHER STRAP TO THE TETHER ANCHORAGE.

Manufacturer’s stated response

OWNERS WILL BE PROVIDED WITH AN ADDENDUM TO THE OWNER'S MANUALS.

Manufacturer campaign: 957

Reported concern

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE OUTER LAYER ONLY OF THIS 3-LAYER FUEL RETURN HOSE DOES NOT CONTAIN THE DESIRED OZONE PROTECTION DUE TO A PROCESSING ERROR.

Manufacturer’s stated response

DEALERS WILL REPLACE THE FUEL RETURN HOSE.

Manufacturer campaign: 959

Reported concern

VEHICLE DESCRIPTION: PASSENGER VEHICLES. PASSENGER AIR BAGS WERE BUILT WITH SUSPECT ALUMINUM EXTRUSION SECTIONS WHICH MAY NOT RETAIN THE AIR BAG DOOR DURING AN AIR BAG DEPLOYMENT EVENT.

Manufacturer’s stated response

DEALERS WILL REPLACE THE PASSENGER SIDE AIR BAG.

Manufacturer campaign: 898

Reported concern

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE HARNESS FOR THE CRANKSHAFT POSITION SENSOR COULD COME IN CONTACT WITH A NEW PROTECTIVE SHIELD CAUSING A GROUNDED CIRCUIT.

Manufacturer’s stated response

DEALERS WILL RE-ROUTE THE CRANKSHAFT POSITION SENSOR HARNESS.

Reported concern

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THROUGH DEGRADATION OF THE BOND BETWEEN THE SILENCER PAD AND A SHEET METAL PANEL (QUARTER INNER UPPER), THE PAD MAY FALL ONTO THE MAP LIGHT LOCATED IN THE REAR SEATING AREA NEAR THE C-PILLAR TRIM PANEL (LH AND RH). THIS CONTACT COULD CAUSE THE PAD TO MELT, CREATING A HOT SMELL AND/OR SMOKE DURING LONG PERIODS OF ILLUMINATION.

Manufacturer’s stated response

DEALERS WILL REMOVE THE INSULATION PAD FROM BEHIND BOTH REAR MAP LIGHTS.

Manufacturer campaign: 896