The manufacturer’s record · Page 15 of 16

2010 Chevrolet TAHOE
Manufacturer communications & TSBs.Page 15

Original record summaries, dates and identifiers for this model-year. Records 1,401–1,500 of 1,582, ordered newest first. Dated records on this page: Oct 1, 2012–Dec 1, 2012.

Back to 2010 Chevrolet TAHOE problems & recalls
Read the applicability before drawing a conclusion.

This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.

NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.

Dec 1, 2012Service Bulletin/Repair Instructions

120310003

NHTSA communication ID: 10245772

NHTSA source summary · Original PDF not reviewed by Recallfolio

Diagnostic Tips for Difficult to Resolve Tire/Wheel Vibration Concerns

Source components: SUSPENSION · TIRES · UNKNOWN OR OTHER · WHEELS · WHEELS:LUGS/NUTS/BOLTS/STUDS.

Source record 10245772 at NHTSA
Dec 1, 2012Service Bulletin/Repair Instructions

SB-12-03-10-003

NHTSA communication ID: 10062548

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: STRUCTURE · STRUCTURE:BODY.

Source record 10062548 at NHTSA
Dec 1, 2012Service Bulletin/Repair Instructions

PI-0648

NHTSA communication ID: 10043510

NHTSA source summary · Original PDF not reviewed by Recallfolio

CADILLAC/CHEVROLET/GMC: ORIGINAL STYLE BLOWER MOTOR ASSEMBLY IS NO LONGER AVAILABLE. A REVISED HVAC BLOWER MOTOR ASSEMBLY FOR FULL SIZE TRUCKS IS REQUIRED, WITH MODIFICATIONS, TO FUNCTION PROPERLY. *PE UPDATED 2/25/13. *PE

Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.

Source record 10043510 at NHTSA
Nov 30, 2012Service Bulletin/Repair Instructions

08-08-46-004A

NHTSA communication ID: 10138220

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.

Source components: ELECTRICAL SYSTEM · EQUIPMENT.

Source record 10138220 at NHTSA
Nov 30, 2012Service Bulletin/Repair Instructions

08-08-46-004A

NHTSA communication ID: 10137478

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.

Source components: EQUIPMENT.

Source record 10137478 at NHTSA
Nov 30, 2012Service Bulletin/Repair Instructions

080846004A

NHTSA communication ID: 10126163

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.

Source components: ELECTRICAL SYSTEM:SOFTWARE.

Source record 10126163 at NHTSA
Nov 30, 2012Service Bulletin/Repair Instructions

PIT5019A

NHTSA communication ID: 10112618

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have the front seats will not cool when using remote vehicle start. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.

Source components: ELECTRICAL SYSTEM · SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER.

Source record 10112618 at NHTSA
Nov 29, 2012Service Bulletin/Repair Instructions

08-08-44-015C

NHTSA communication ID: 10138218

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information regarding the inappropriate warranty claims submitted for damaged radios and instrument panel clusters, provides exampls on whats an acceptable for warranty and whats not

Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM) · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10138218 at NHTSA
Nov 29, 2012Service Bulletin/Repair Instructions

08-08-44-015C

NHTSA communication ID: 10137476

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information regarding the inappropriate warranty claims submitted for damaged radios and instrument panel clusters, provides exampls on whats an acceptable for warranty and whats not

Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10137476 at NHTSA
Nov 29, 2012Service Bulletin/Repair Instructions

PIT3330F

NHTSA communication ID: 10112614

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about customers may inquire about the availability of the passenger compartment air filter. Dealer should advise the customer starting in 2003 the passenger compartment air filter is no longer available as a factory option.

Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.

Source record 10112614 at NHTSA
Nov 29, 2012Service Bulletin/Repair Instructions

PIT4261C

NHTSA communication ID: 10112613

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.

Source components: TIRES:SIDEWALL.

Source record 10112613 at NHTSA
Nov 28, 2012Service Bulletin/Repair Instructions

00-00-89-027G

NHTSA communication ID: 10138217

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10138217 at NHTSA
Nov 28, 2012Service Bulletin/Repair Instructions

00-00-89-027G

NHTSA communication ID: 10137475

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.

Source components: EQUIPMENT.

Source record 10137475 at NHTSA
Nov 28, 2012Service Bulletin/Repair Instructions

000089027G

NHTSA communication ID: 10126171

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.

Source components: EQUIPMENT.

Source record 10126171 at NHTSA
Nov 28, 2012Service Bulletin/Repair Instructions

PIC4801E

NHTSA communication ID: 10112608

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have an OnStar Turn-By-Turn Navigation the system that is inoperative. Technician verifies there are no Diagnostic Trouble Codes are present in the Antilock Braking System and Vehicle Communication Interface Module of the vehicle. If no Diagnostic Trouble Codes found call OnStar using the Blue button on the OnStar key pad and ask the advisor for a turn by turn route. Also make a OnStar personal call and a call into the vehicle. If normal diagnostics do not lead to a resolution technician will need to call General Motors Technical Assistance Center for further assistance.

Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).

Source record 10112608 at NHTSA
Nov 28, 2012Service Bulletin/Repair Instructions

PIC4310H

NHTSA communication ID: 10112607

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.

Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).

Source record 10112607 at NHTSA
Nov 28, 2012Service Bulletin/Repair Instructions

PIT4733J

NHTSA communication ID: 10112606

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician that customers may inquire as to the availability of OnStar bluetooth on their vehicle. Technician should be advised that Vehicles with Regular Production Option Code (UPF or UWE) offer Bluetooth through the OnStar system.

Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.

Source record 10112606 at NHTSA
Nov 27, 2012Service Bulletin/Repair Instructions

PIT4505F

NHTSA communication ID: 10112603

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a rattle, buzz, tick, or vibration type noise that appears to be coming from the center of the dash. Technician will adjust the transmission dipstick tube away from the front of cowl to provide additional clearance.

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10112603 at NHTSA
Nov 26, 2012Service Bulletin/Repair Instructions

PI0657A

NHTSA communication ID: 10138212

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary information bulletin provides a procedure for replacement of the liftgate applique for concerns regarding the applique being deformed or dimpled or paint damage at the lower edge of the applique

Source components: EQUIPMENT · STRUCTURE:BODY:HATCHBACK/LIFTGATE.

Source record 10138212 at NHTSA
Nov 26, 2012Service Bulletin/Repair Instructions

PI0657A

NHTSA communication ID: 10137470

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary information bulletin provides a procedure for replacement of the liftgate applique for concerns regarding the applique being deformed or dimpled or paint damage at the lower edge of the applique

Source components: STRUCTURE:BODY:HATCHBACK/LIFTGATE.

Source record 10137470 at NHTSA
Nov 26, 2012Service Bulletin/Repair Instructions

120310002

NHTSA communication ID: 10126191

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER.

Source record 10126191 at NHTSA
Nov 26, 2012Service Bulletin/Repair Instructions

PI0657A

NHTSA communication ID: 10126164

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary information bulletin provides a procedure for replacement of the liftgate applique for concerns regarding the applique being deformed or dimpled or paint damage at the lower edge of the applique

Source components: STRUCTURE:BODY:HATCHBACK/LIFTGATE.

Source record 10126164 at NHTSA
Nov 26, 2012Service Bulletin/Repair Instructions

PIP3720D

NHTSA communication ID: 10112600

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician with the axel setup information from American Axle Manufacturing. Technician should be advised that the maximum pinion shim to be used or stacked behind the pinion is 0.050?, and the minimum pinion shim is 0.020? for an 8.6 axle. The range for available pinion depth shims for the 10.5? axle is 0.006? to 0.024?. When setting the backlash it should be set between 0.003? to 0.005? on a new ring and pinion for any American Axle Manufacturing application. The ring and pinion can be reused or adjusted if the mileage is less than 500 miles, if not used for towing. Technician should be advised that a ?roller coaster? or ?hourglass? pattern on the bearings may be normal up to 10,000 miles and possibly longer. With a mis-machined housing you may get a heel pattern on both sides of the gear teeth at build up can generally be corrected with backlash adjustments. When setting up an 8.6? axle with a 5 cut gear set is to use a 0.035? pinion shim and set backlash to 0.004?. When using the newer 2 cut gear set also use a 0.035? pinion shim and still set backlash to 0.004?. To set the gear pattern use backlash to adjust the pattern heel to toe. Use the pinion shim to adjust the height of the pattern. The proper drive pinion bearing pre-load is from 15 - 30 inch pounds with new bearings. The total torque to turn after the differential case is installed should increase 5 - 10 inch pounds at the pinion. A new pinion nut must be used whenever the old one is removed. The axle shaft end play specification is 0.012? per side and the radial specification is 0.002? - 0.003?. Technician should be advised that synthetic lube can be used in all new American Axle Manufacturing axle assemblies. The new pinion seal for the 8.6? axle assembly is a two piece design.

Source components: POWER TRAIN:AXLE ASSEMBLY.

Source record 10112600 at NHTSA
Nov 21, 2012Service Bulletin/Repair Instructions

PIT4979C

NHTSA communication ID: 10112597

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a buzz or rattle type noise during light acceleration around 1200-2000 Revolutions per minute. Technician will need to reposition the fuel line and bracket down away from the floor pan.

Source components: FUEL SYSTEM, GASOLINE · FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS.

Source record 10112597 at NHTSA
Nov 20, 2012Service Bulletin/Repair Instructions

06-00-89-026J

NHTSA communication ID: 10138211

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.

Source components: EQUIPMENT.

Source record 10138211 at NHTSA
Nov 20, 2012Service Bulletin/Repair Instructions

10-08-44-004C

NHTSA communication ID: 10138209

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on USB command and control multimedia player interface/list of supported devices.

Source components: ELECTRICAL SYSTEM · EQUIPMENT.

Source record 10138209 at NHTSA
Nov 20, 2012Service Bulletin/Repair Instructions

06-00-89-026J

NHTSA communication ID: 10137469

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.

Source components: EQUIPMENT.

Source record 10137469 at NHTSA
Nov 20, 2012Service Bulletin/Repair Instructions

10-08-44-004C

NHTSA communication ID: 10137467

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on USB command and control multimedia player interface/list of supported devices.

Source components: EQUIPMENT.

Source record 10137467 at NHTSA
Nov 20, 2012Service Bulletin/Repair Instructions

100844004C

NHTSA communication ID: 10126194

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on USB command and control multimedia player interface/list of supported devices.

Source components: ELECTRICAL SYSTEM.

Source record 10126194 at NHTSA
Nov 20, 2012Service Bulletin/Repair Instructions

060089026J

NHTSA communication ID: 10126192

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10126192 at NHTSA
Nov 16, 2012Service Bulletin/Repair Instructions

PIT4585E

NHTSA communication ID: 10112581

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that may have a no crank condition after the vehicle has had very low accessory battery voltage or a dead battery condition. Technician may find Diagnostic Trouble Code P0C76 set. Technician should be advised that anytime a battery charger or booster pack is connected to the 12 volt battery, the ignition key should always be in the off position. If a battery charger or booster pack is connected to the 12 volt battery with the ignition key on tech will need to reset the Hybrid Powertrain Control Module Diagnostic Trouble Codes.

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ELECTRICAL SYSTEM:IGNITION.

Source record 10112581 at NHTSA
Nov 16, 2012Service Bulletin/Repair Instructions

PIT4383N

NHTSA communication ID: 10112580

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication advises the technician that the Electronic Brake Control Module and Brake Pressure Modulator Valve for the 2-Mode Hybrid Utilities and Trucks will be placed on a parts restriction through the General Motors Technical Assistance Center. Dealer will need to contact for further assistance.

Source components: SERVICE BRAKES.

Source record 10112580 at NHTSA
Nov 15, 2012Service Bulletin/Repair Instructions

PIT4593D

NHTSA communication ID: 10112578

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a lack of brake assist after disconnecting the battery or after the 12 volts battery has run low on voltage. The Antilock Braking System Malfunction Indicator Lamp may also be on. Technician may find Diagnostic Trouble Code C121D sym 00 or C056D sym 00 set in the Electronic Brake Control Module. Technician should be advised to wait for a period of at least 1 minute with the ignition in the "OFF" position prior to disconnecting the negative battery cable. Technician will need to follow these steps to repair the concern. 1. Install the negative battery cable to the battery. 2. Rotate the lever lock clockwise until an audible click is heard in order to connect the negative battery cable to the battery. 3. Position the negative battery cable insulating cover over the negative terminal. 4. Start the vehicle without stepping on the brake pedal. 5. Shut the vehicle "Off" for one minute. 6. Restart vehicle and check brakes for proper operation. 7. Clear codes in the Engine Control Module and the Electronic Brake Control Module.

Source components: ELECTRICAL SYSTEM · SERVICE BRAKES, ELECTRIC.

Source record 10112578 at NHTSA
Nov 15, 2012Service Bulletin/Repair Instructions

PIT4600E

NHTSA communication ID: 10112577

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about Electronic Brake Control Module relearn procedure is required anytime the Electronic Brake Control Module is replaced or has been Service Programming System reprogrammed.

Source components: EQUIPMENT:ELECTRICAL · SERVICE BRAKES, ELECTRIC.

Source record 10112577 at NHTSA
Nov 15, 2012Service Bulletin/Repair Instructions

PIT4041D

NHTSA communication ID: 10112573

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that the power lift gate Regular Production Option Code (E61 or TB5) is inoperative. Technician will find Diagnostic Trouble Code B153A set in the power lift gate control module. Technician will need to perform these steps. 1. Disconnect the connector at the Lift gate Latch Assembly. 2. Install a 3 ampere fused jumper wire between each signal circuit and the ground circuit. 3. If either test fails, check the wiring for the signal circuits, low reference circuit, or try a power lift gate control module from a known good vehicle. 4. If both tests pass, monitor the internal switch inputs in the lift gate latch assembly for proper operation. 5. If one of the internal lift gate latch assembly switch inputs are not reading correctly in one of the positions above and the vehicles passes test both test, replace the Lift Gate Latch Assembly.

Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY:HATCHBACK/LIFTGATE.

Source record 10112573 at NHTSA
Nov 13, 2012Service Bulletin/Repair Instructions

10-00-89-010B

NHTSA communication ID: 10138201

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.

Source components: EQUIPMENT.

Source record 10138201 at NHTSA
Nov 13, 2012Service Bulletin/Repair Instructions

10-00-89-010B

NHTSA communication ID: 10137459

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.

Source components: EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES.

Source record 10137459 at NHTSA
Nov 13, 2012Service Bulletin/Repair Instructions

12-00-89-002A

NHTSA communication ID: 10137458

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information for requesting a new key code for customers with lost or stolen keys

Source components: EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES.

Source record 10137458 at NHTSA
Nov 13, 2012Service Bulletin/Repair Instructions

120089002A

NHTSA communication ID: 10126197

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information for requesting a new key code for customers with lost or stolen keys

Source components: EQUIPMENT.

Source record 10126197 at NHTSA
Nov 13, 2012Service Bulletin/Repair Instructions

100089010B

NHTSA communication ID: 10126196

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.

Source components: EQUIPMENT.

Source record 10126196 at NHTSA
Nov 12, 2012Service Bulletin/Repair Instructions

10-00-89-017W

NHTSA communication ID: 10138200

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.

Source components: ELECTRICAL SYSTEM · EQUIPMENT · STRUCTURE.

Source record 10138200 at NHTSA
Nov 12, 2012Service Bulletin/Repair Instructions

01-00-89-010J

NHTSA communication ID: 10138197

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a revision for 01-00-89-010I to add the 2013 model year.

Source components: ENGINE · EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION · SERVICE BRAKES.

Source record 10138197 at NHTSA
Nov 12, 2012Service Bulletin/Repair Instructions

10-00-89-017W

NHTSA communication ID: 10137457

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.

Source components: EQUIPMENT.

Source record 10137457 at NHTSA
Nov 12, 2012Service Bulletin/Repair Instructions

01-00-89-010J

NHTSA communication ID: 10137454

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a revision for 01-00-89-010I to add the 2013 model year.

Source components: EQUIPMENT.

Source record 10137454 at NHTSA
Nov 12, 2012Service Bulletin/Repair Instructions

010089010J

NHTSA communication ID: 10126200

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a single point reference and strategy document to aid in reducing customer comebacks, and the possibility of buyback situations by outlining specific guidelines, strategy and forms that will assist with this goal, by identifying, clarifying and documenting customer concerns accurately at each service visit.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10126200 at NHTSA
Nov 12, 2012Service Bulletin/Repair Instructions

100089017W

NHTSA communication ID: 10126198

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.

Source components: EQUIPMENT.

Source record 10126198 at NHTSA
Nov 9, 2012Service Bulletin/Repair Instructions

03-08-46-004M

NHTSA communication ID: 10138196

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on part restriction and ordering process information for onstar vehicle communication interface modules.

Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10138196 at NHTSA
Nov 9, 2012Service Bulletin/Repair Instructions

03-08-46-004M

NHTSA communication ID: 10137453

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on part restriction and ordering process information for onstar vehicle communication interface modules.

Source components: COMMUNICATION · ELECTRICAL SYSTEM · EQUIPMENT.

Source record 10137453 at NHTSA
Nov 9, 2012Service Bulletin/Repair Instructions

PIT4907A

NHTSA communication ID: 10112560

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about brake rotors on new vehicles and replacement parts from General Motors Service Parts Operations. Technician should be advised the costing should not be removed from the brake rotor it will wear off with normal brake usage. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.

Source components: SERVICE BRAKES.

Source record 10112560 at NHTSA
Nov 8, 2012Service Bulletin/Repair Instructions

11-06-04-007C

NHTSA communication ID: 10138192

NHTSA source summary · Original PDF not reviewed by Recallfolio

This technical bulletin provides a procedure for replacing the throttle position sensor cover for concerns regarding a indicator lamp illuminated reduced power message displayed and DTC P2135 set.

Source components: ELECTRICAL SYSTEM · ENGINE · EQUIPMENT · POWER TRAIN.

Source record 10138192 at NHTSA
Nov 8, 2012Service Bulletin/Repair Instructions

10-08-64-002B

NHTSA communication ID: 10138191

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork

Source components: EQUIPMENT · VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR.

Source record 10138191 at NHTSA
Nov 8, 2012Service Bulletin/Repair Instructions

11-06-04-007C

NHTSA communication ID: 10137449

NHTSA source summary · Original PDF not reviewed by Recallfolio

This technical bulletin provides a procedure for replacing the throttle position sensor cover for concerns regarding a indicator lamp illuminated reduced power message displayed and DTC P2135 set.

Source components: ENGINE AND ENGINE COOLING.

Source record 10137449 at NHTSA
Nov 8, 2012Service Bulletin/Repair Instructions

10-08-64-002B

NHTSA communication ID: 10137448

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork

Source components: EQUIPMENT.

Source record 10137448 at NHTSA
Nov 8, 2012Service Bulletin/Repair Instructions

100864002B

NHTSA communication ID: 10126203

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10126203 at NHTSA
Nov 8, 2012Service Bulletin/Repair Instructions

110604007C

NHTSA communication ID: 10126202

NHTSA source summary · Original PDF not reviewed by Recallfolio

This technical bulletin provides a procedure for replacing the throttle position sensor cover for concerns regarding a indicator lamp illuminated reduced power message displayed and DTC P2135 set.

Source components: ELECTRICAL SYSTEM:SOFTWARE.

Source record 10126202 at NHTSA
Nov 8, 2012Service Bulletin/Repair Instructions

PIT4815C

NHTSA communication ID: 10112558

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician with additional vehicle speed sensor diagnostic information. Technician may encounter multiple issues when diagnosing a Vehicle Speed Sensor. Technician will find it difficult to follow the speed signal path between the components. To test connect the Fluke meter leads between circuits 821 and 822 and set the meter to Alternating current voltage and then press the hertz button. When the Engine Control Module showing correct miles per hour in the data list however it is setting a Diagnostic Trouble Code for the Vehicle Speed Sensor. To test connect the Fluke meter red lead to circuit 6399 and the black lead to ground, then set the meter to Direct current voltage and press the hertz button. The Instrument Panel Cluster speedo will work correctly when the Engine Control Module or Antilock Braking System Diagnostic Trouble Codes are for the Vehicle Speed Sensor. To test connect the Fluke meter red lead to circuit 1827 and the black lead to ground, then set the meter to Direct current voltage and press the hertz button. When the Antilock Braking System Malfunction Indicator Lamp on with Electronic Brake Control Module Diagnostic Trouble Code C0055 and no other customer complaints, to test connect the Fluke meter red lead to circuit 817 and the black lead to ground, then set the meter to Direct current voltage and press the hertz button.

Source components: ELECTRICAL SYSTEM.

Source record 10112558 at NHTSA
Nov 7, 2012Service Bulletin/Repair Instructions

PI0695A

NHTSA communication ID: 10138189

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on how to properly mount and balance wheels and tires on heavy duty truck models only

Source components: TIRES · WHEELS.

Source record 10138189 at NHTSA
Nov 7, 2012Service Bulletin/Repair Instructions

PI0695A

NHTSA communication ID: 10137446

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on how to properly mount and balance wheels and tires on heavy duty truck models only

Source components: TIRES · WHEELS.

Source record 10137446 at NHTSA
Nov 7, 2012Service Bulletin/Repair Instructions

PI0695A

NHTSA communication ID: 10126167

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary informational bulletin provides a procedure to replace the first junction block terminal and other terminals to correct a condition of poor HVAC performance.

Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.

Source record 10126167 at NHTSA
Nov 6, 2012Service Bulletin/Repair Instructions

PIT4225F

NHTSA communication ID: 10112551

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have an Antilock Braking System lamp followed by a Service Stability message in the Drivers Information Center. Technician my find Diagnostic Trouble Code C0710 set in the Electronic Brake Control Module. Technician may or may not find Diagnostic Trouble Code C0455. Technician will need to ensure the steering wheel is properly installed to the steering shaft.

Source components: SERVICE BRAKES, AIR:ANTILOCK · SERVICE BRAKES, ELECTRIC · SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP.

Source record 10112551 at NHTSA
Nov 6, 2012Service Bulletin/Repair Instructions

PIT4163E

NHTSA communication ID: 10112548

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that only have audio from the front left speaker after replacing the amplifier. Technician should program the amplifier using Tis-2-Web using Service Programming System with the latest calibrations.

Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10112548 at NHTSA
Nov 6, 2012Service Bulletin/Repair Instructions

PIT5014A

NHTSA communication ID: 10112547

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a front passenger flooring wet, water sloshing noise, and/or mist from the dash vents. Technician will need to rotate the drain hose to clear the heat shield.

Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.

Source record 10112547 at NHTSA
Nov 6, 2012Service Bulletin/Repair Instructions

PIT4208D

NHTSA communication ID: 10112544

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that may have a power steering pump whine noise. Technician will need to flush and refill the power steering system with Lucas Power Steering Fluid with Conditioners. Technician will replace the power steering pump with the latest design if the fluid is not available.

Source components: SERVICE BRAKES, HYDRAULIC:POWER ASSIST · STEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID.

Source record 10112544 at NHTSA
Nov 5, 2012Service Bulletin/Repair Instructions

PIT4979B

NHTSA communication ID: 10112541

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a buzz or rattle type noise during light acceleration around 1200-2000 Revolutions per minute. Technician will need to reposition the fuel line and bracket down away from the floor pan.

Source components: ENGINE AND ENGINE COOLING.

Source record 10112541 at NHTSA
Nov 5, 2012Service Bulletin/Repair Instructions

PIT4937B

NHTSA communication ID: 10112540

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that the rear power lift-gate is inoperative with the inside switch and the outside door handle. Dealer should advise the customer to press the unlock button on the door panel and the lift-gate will work.

Source components: STRUCTURE:BODY:HATCHBACK/LIFTGATE · STRUCTURE:BODY:HATCHBACK/LIFTGATE:HINGE AND ATTACHMENTS.

Source record 10112540 at NHTSA
Nov 2, 2012Service Bulletin/Repair Instructions

PIT4874B

NHTSA communication ID: 10112536

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B0081 in the Sensing and Diagnostic Module and Passenger Presence Sensor modules. Technician should inspect the Sensing and Diagnostic Module and Passenger Presence Sensor powers, grounds, and communication circuits at all in line connectors for fully seated, backed out terminals, and proper terminal tension using the correct test probes.

Source components: AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE · AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION.

Source record 10112536 at NHTSA
Nov 1, 2012Service Bulletin/Repair Instructions

PI0695A

NHTSA communication ID: 10253610

NHTSA source summary · Original PDF not reviewed by Recallfolio

Diagnosis and Repair HVAC Blower Function.

Source components: VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.

Source record 10253610 at NHTSA
Nov 1, 2012Service Bulletin/Repair Instructions

120089002A

NHTSA communication ID: 10245761

NHTSA source summary · Original PDF not reviewed by Recallfolio

Requesting a New Key Code for Customer with Lost or Stolen Keys

Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER · EQUIPMENT.

Source record 10245761 at NHTSA
Nov 1, 2012Service Bulletin/Repair Instructions

110604007C

NHTSA communication ID: 10245749

NHTSA source summary · Original PDF not reviewed by Recallfolio

Diagnosis and Repair - Malfunction Indicator Lamp (MIL) Illuminated, Reduced Engine Power Message Displayed, DTC P2135 Set

Source components: EXTERIOR LIGHTING · POWER TRAIN.

Source record 10245749 at NHTSA
Nov 1, 2012Service Bulletin/Repair Instructions

PIC5491A

NHTSA communication ID: 10112529

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.

Source components: EQUIPMENT:ELECTRICAL.

Source record 10112529 at NHTSA
Nov 1, 2012Service Bulletin/Repair Instructions

PIC4935D

NHTSA communication ID: 10112528

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that during battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the OnStar system. Technician should understand the power cycles of the various OnStar systems. All Generation 6, 7, 8, and 9 systems are powered up continuously for 48 hours from ignition off. After 120 hours from ignition off, these systems then completely power off. The Onstar modules draw: * IGN ON - 240 to 400 Milliamp. * IGN OFF - 3 to 20 Milliamp for 48 hours or 120 hours on Gen 9 and vehicle communication platforms. * IGN OFF - 0.2 to 0.8 Milliamp after 48 hours or 120 hours on Gen 9 and vehicle communication platforms.

Source components: ELECTRICAL SYSTEM.

Source record 10112528 at NHTSA
Nov 1, 2012Service Bulletin/Repair Instructions

S8-10-08-44-004C

NHTSA communication ID: 10062525

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: ELECTRICAL SYSTEM.

Source record 10062525 at NHTSA
Nov 1, 2012Service Bulletin/Repair Instructions

PI-0695

NHTSA communication ID: 10043892

NHTSA source summary · Original PDF not reviewed by Recallfolio

GM: DIAGNOSE AND REPAIR HVAC BLOWER FUNCTION. MAY NOT BE ANY AIR FLOW FROM THE HVAC VENTS. ONE POSSIBLE OF THIS CONDITION MAY BE THE CONTACTS IN THE HVAC JUNCTION BLOCK(S) LOCATED AT THE RIGHT SIDE OF THE INSTRUMENTAL PANEL. *JS UPDATED 1/24/13. *PE

Source components: VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:FAN/MOTOR.

Source record 10043892 at NHTSA
Oct 31, 2012Service Bulletin/Repair Instructions

PIT4169F

NHTSA communication ID: 10112526

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a "Service Stability Message" appears on the Drivers Information Center. Technician will find Diagnostic Trouble Code C0561 set in the Electronic Brake Control Module. Technician will need to address any other Diagnostic Trouble Codes that are set in the vehicle first before working on Diagnostic Trouble Code C0561.

Source components: EQUIPMENT:ELECTRICAL · SERVICE BRAKES, ELECTRIC.

Source record 10112526 at NHTSA
Oct 29, 2012Service Bulletin/Repair Instructions

PIT3078F

NHTSA communication ID: 10112519

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have grease leaking from front hub bearings. Technician should not replace the bearing for grease purge. Technician should be advised to not clean the purged grease from the area immediately on or adjacent to the seals because this grease provides additional protection. Technician should only replace the bearing if the seals show visible damage, bearing endplay is greater than 0.005" or 0.13mm, bearing exhibits rough rotation, or bearing exhibits abnormal noise.

Source components: SUSPENSION:FRONT:HUB · WHEELS:HUB.

Source record 10112519 at NHTSA
Oct 25, 2012Service Bulletin/Repair Instructions

12138

NHTSA communication ID: 10089661

NHTSA source summary · Original PDF not reviewed by Recallfolio

12138 - CUSTOMER SATISFACTION PROGRAM. NORMAL ENGINE VIBRATION WHILE IN ACTIVE FUEL MANAGEMENT (AFM) MODE MAY CAUSE THE TRANSMISSION DIPSTICK TUBE TO FATIGUE AND FRACTURE. IF THIS OCCURS, IT COULD CAUSE A TICK OR RATTLE NOISE FROM THE FRONT OF THE VEHICLE. DEALERS ARE TO INSPECT THE TRANSMISSION DIPSTICK TUBE FOR A FRACTURE AND REPLACE IT IF NECESSARY. IF NO FRACTURE IS FOUND, DEALERS ARE TO INSTALL A FOAM SLEEVE AROUND THE TUBE TO ABSORB THE VIBRATION.

Source components: ENGINE · EQUIPMENT.

Source record 10089661 at NHTSA
Oct 25, 2012Service Bulletin/Repair Instructions

SB-12138-A

NHTSA communication ID: 10059943

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10059943 at NHTSA
Oct 22, 2012Service Bulletin/Repair Instructions

PIT4089H

NHTSA communication ID: 10112512

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that are unable to set a personalized easy exit seat and/or power tilt column position and they will only move a predetermined amount. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.

Source components: EQUIPMENT ADAPTIVE/MOBILITY · SEATS.

Source record 10112512 at NHTSA
Oct 18, 2012Service Bulletin/Repair Instructions

PIT3099J

NHTSA communication ID: 10112494

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts. Technician can check Service Information for some accessories. Technician can also contact Partech for assistance.

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10112494 at NHTSA
Oct 17, 2012Service Bulletin/Repair Instructions

PIP5069

NHTSA communication ID: 10112487

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a lack of power on initial acceleration from a stop when the ambient temperature is approximately 103 Fahrenheit or greater and may include engine detonation or pre-ignition type events as temperatures approach 120 Fahrenheit. Technician will need to perform published Service Information diagnosis first. If Service Information diagnosis does not isolate the cause of this concern, take a Tech 2 snapshot of the concern happening and note the Spark Parameter in the Ignition Data List. If it drops near/below 0 degrees during the concern, check if there is a cylinder that shows any knock. If there is a knock in any cylinder perform a top engine clean. If the concern is still present, then switching to premium fuel (91 octane or higher) with detergents (Top tier fuel) when ambient temperatures exceed 110 Fahrenheit degrees, this should provide a slight improvement in engine performance when ambient temperatures are high especially as temperatures approach 120 Fahrenheit degrees.

Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.

Source record 10112487 at NHTSA
Oct 16, 2012Service Bulletin/Repair Instructions

PI0086D

NHTSA communication ID: 10118643

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary informational bulletin provides a list of corrections for multiple concerns regarding Unexpected Loss of Radio Audio (Radio Goes Silent/No Sound) and Other Blackberry Phone - Bluetooth Issues

Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10118643 at NHTSA
Oct 16, 2012Service Bulletin/Repair Instructions

PI0086D

NHTSA communication ID: 10084191

NHTSA source summary · Original PDF not reviewed by Recallfolio

THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES A LIST OF CORRECTIONS FOR MULTIPLE CONCERNS REGARDING UNEXPECTED LOSS OF RADIO AUDIO (RADIO GOES SILENT/NO SOUND) AND OTHER BLACKBERRY PHONE - BLUETOOTH ISSUES

Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10084191 at NHTSA
Oct 15, 2012Service Bulletin/Repair Instructions

09-06-04-026E

NHTSA communication ID: 10118638

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on Identifying Non-GM (Aftermarket) Engine Calibrations for Gasoline Engines Using Tech 2 or GDS 2

Source components: ENGINE AND ENGINE COOLING.

Source record 10118638 at NHTSA
Oct 15, 2012Service Bulletin/Repair Instructions

12-00-89-007

NHTSA communication ID: 10118637

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on dealer responsibility for cargo carrying capacity labeling and the part numbers for the labels.

Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:OTHER:LABELS.

Source record 10118637 at NHTSA
Oct 15, 2012Service Bulletin/Repair Instructions

PI0373A

NHTSA communication ID: 10118635

NHTSA source summary · Original PDF not reviewed by Recallfolio

This preliminary informational bulletin provides a procedure for relearning the power folding mirriors and road testin to verify they correct a condtion of the power folding mirriors glass shakes, flutters at normal driving conditions.

Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES.

Source record 10118635 at NHTSA
Oct 15, 2012Service Bulletin/Repair Instructions

09-07-30-018C

NHTSA communication ID: 10118634

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty administration bulletin provides information on the change in automatic transmission add conditions documentation and claim submissions

Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10118634 at NHTSA
Oct 15, 2012Service Bulletin/Repair Instructions

PIT5185

NHTSA communication ID: 10112472

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that if the ignition key is turned to the start position, and then released when the engine begins cranking, the engine will continue cranking for a few seconds or until the vehicle starts. Some customers may state that this feature is inoperative. Technician should be advised that if the Low Fuel warning lamp is on and/or the FUEL LEVEL LOW message is displayed in the Driver Information Center, the Computer?Controlled Cranking System will be disabled.

Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:IGNITION.

Source record 10112472 at NHTSA
Oct 15, 2012Service Bulletin/Repair Instructions

PI0373A

NHTSA communication ID: 10084683

NHTSA source summary · Original PDF not reviewed by Recallfolio

THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES A PROCEDURE FOR RELEARNING THE POWER FOLDING MIRRIORS AND ROAD TESTIN TO VERIFY THEY CORRECT A CONDTION OF THE POWER FOLDING MIRRIORS GLASS SHAKES, FLUTTERS AT NORMAL DRIVING CONDITIONS.

Source components: EQUIPMENT · STRUCTURE.

Source record 10084683 at NHTSA
Oct 12, 2012Service Bulletin/Repair Instructions

PIT5184

NHTSA communication ID: 10112470

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have an instrument panel backlighting flashes, flickers or inoperative, unwanted horn activation, radio controls inoperative or unwanted activation, OnStar unwanted activation, and cruise control inoperative. Technician should inspect for a short to ground on the steering wheel near the Supplemental Inflatable Restraint coil connector X2 and make necessary repairs to any shorted circuits and then position the wiring.

Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:WIRING · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC. · VEHICLE SPEED CONTROL:CRUISE CONTROL.

Source record 10112470 at NHTSA
Oct 12, 2012Service Bulletin/Repair Instructions

PIT3237F

NHTSA communication ID: 10112468

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about the percentage of Ultraviolet protection or tint offered by the windshield or side glass. Technician should be advised Windshield reduces Ultraviolet rays down to 4% or less. Front side door glass reduces Ultraviolet rays down to 35% or less. Windshields are SOLAR glass with a light transmittance of >/=70%. Front door glass are Solar glass with a light transmission of >/=70%. Rear door glass, quarter windows and back windows can use either Solar glass (>/=70%) or Privacy glass, which has a light transmittance of 20%.

Source components: VISIBILITY:GLASS, SIDE/REAR · VISIBILITY:WINDSHIELD.

Source record 10112468 at NHTSA
Oct 11, 2012Service Bulletin/Repair Instructions

PIC5759

NHTSA communication ID: 10112465

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that have a message on the radio "maximum number of phones are currently paired to the vehicle". Dealer should advise the customer this is normal operation of the vehicle due to the maximum number of five phones can be paired to a vehicle.

Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10112465 at NHTSA
Oct 10, 2012Service Bulletin/Repair Instructions

11-00-89-005B

NHTSA communication ID: 10118626

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty administrational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10118626 at NHTSA
Oct 9, 2012Service Bulletin/Repair Instructions

07-00-89-037E

NHTSA communication ID: 10118623

NHTSA source summary · Original PDF not reviewed by Recallfolio

This warranty administrational bulletin provides information on courtesy transportation and roadside assistance programs offered through GM.

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10118623 at NHTSA
Oct 5, 2012Service Bulletin/Repair Instructions

10-00-89-017V

NHTSA communication ID: 10118619

NHTSA source summary · Original PDF not reviewed by Recallfolio

This informational bulletin provides information on newly release bulletins used to fi the vehicles in the field the first time.

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10118619 at NHTSA
Oct 5, 2012Service Bulletin/Repair Instructions

PIT4508C

NHTSA communication ID: 10112452

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Preliminary Information communication provides information to the technician about vehicles that the cruise control being inoperative. Technician may find Diagnostic Trouble Code B3894 set in the Trailer Brake Control Module. Technician should follow published Service Information diagnostics first. Technician should check the "Master Cylinder Pressure" sensor parameter listed in the Trailer Brake Control Module data list. If it is displaying pressure with no brake pedal input, suspect a concern with the Master Cylinder Pressure Sensor, wiring/terminals, or Electronic Brake Control Module.

Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL.

Source record 10112452 at NHTSA
Oct 1, 2012Service Bulletin/Repair Instructions

PIT5185

NHTSA communication ID: 10247742

NHTSA source summary · Original PDF not reviewed by Recallfolio

Computer-Controlled Cranking System (Bump Start) Inoperative.

Source components: ELECTRICAL SYSTEM:IGNITION.

Source record 10247742 at NHTSA
Oct 1, 2012Service Bulletin/Repair Instructions

PIT5184

NHTSA communication ID: 10247741

NHTSA source summary · Original PDF not reviewed by Recallfolio

Various Concerns Related To The IP Backlighting Cruise Control Steering Wheel Controls Horn.

Source components: STEERING · VEHICLE SPEED CONTROL:CRUISE CONTROL.

Source record 10247741 at NHTSA
Oct 1, 2012Service Bulletin/Repair Instructions

PIT4508C

NHTSA communication ID: 10247656

NHTSA source summary · Original PDF not reviewed by Recallfolio

Cruise Control Inoperative.

Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL · UNKNOWN OR OTHER · VEHICLE SPEED CONTROL:CRUISE CONTROL.

Source record 10247656 at NHTSA
Oct 1, 2012Service Bulletin/Repair Instructions

PIT5185

NHTSA communication ID: 10247087

NHTSA source summary · Original PDF not reviewed by Recallfolio

Computer-Controlled Cranking System (Bump Start) Inoperative.

Source components: ENGINE AND ENGINE COOLING.

Source record 10247087 at NHTSA
Oct 1, 2012Service Bulletin/Repair Instructions

PIT5184

NHTSA communication ID: 10247086

NHTSA source summary · Original PDF not reviewed by Recallfolio

Various Concerns Related To The IP Backlighting Cruise Control Steering Wheel Controls Horn.

Source components: STEERING · VEHICLE SPEED CONTROL:CRUISE CONTROL.

Source record 10247086 at NHTSA