The manufacturer’s record · Page 4 of 5
Original record summaries, dates and identifiers for this model-year. Records 301–400 of 401, ordered newest first. Dated records on this page: Apr 1, 2007–Apr 11, 2014.
Back to 2003 Chevrolet SILVERADO 2500 problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10135198
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin is to inform dealers of an improved service strategy to aid in the replacement of hydraulic brake pipes, Customer Care and Aftersales (CCA) has released pre-formed and pre-flared hydraulic brake pipe kits.
Source components: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS.
Source record 10135198 at NHTSANHTSA communication ID: 10111783
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.
Source components: FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS.
Source record 10111783 at NHTSANHTSA communication ID: 10246646
NHTSA source summary · Original PDF not reviewed by Recallfolio
Pre-Formed and Pre-Flared Hydraulic Brake Pipe Kits Now Available for Service
Source components: SERVICE BRAKES.
Source record 10246646 at NHTSANHTSA communication ID: 10111875
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.
Source components: ENGINE.
Source record 10111875 at NHTSANHTSA communication ID: 10137866
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
Source components: EQUIPMENT.
Source record 10137866 at NHTSANHTSA communication ID: 10111850
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that when a Canadian customer may comment that when they travel to the United States, they are unable to connect to OnStar or use hands free calling. Dealer can advise the customer that the existing cell phone provider not having roaming agreements in areas outside of Canada. At this time, a customer has the option of contacting OnStar to have a 500 number loaded for OnStar operation while in the United States.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10111850 at NHTSANHTSA communication ID: 10111846
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about a customer?s request to install OnStar Bluetooth. Dealer should be advised at this time, there are no provisions to add this option to vehicles that were not built with it.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10111846 at NHTSANHTSA communication ID: 10247681
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information On Requests To Add OnStar Bluetooth Option.
Source components: EQUIPMENT.
Source record 10247681 at NHTSANHTSA communication ID: 10245950
NHTSA source summary · Original PDF not reviewed by Recallfolio
Canadian Customers Unable To Place Calls In The United States
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10245950 at NHTSANHTSA communication ID: 10111964
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have the OnStar system does not respond properly to some numbers and/or voice commands. Dealer should direct the customer to review the operational characteristics in the OnStar Users Guide.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10111964 at NHTSANHTSA communication ID: 10111959
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with a clunk type noise on start up with the vehicle in park when the vehicle is equipped Allison LCT1000 transmission. This condition is considered to be an operating characteristic of the Allison LCT1000 transmission.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10111959 at NHTSANHTSA communication ID: 10138621
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10138621 at NHTSANHTSA communication ID: 10111927
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · FUEL SYSTEM, GASOLINE · SERVICE BRAKES, HYDRAULIC.
Source record 10111927 at NHTSANHTSA communication ID: 10111894
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that General Motors and General Motors of Canada Company do not support cross border sales. The General Motors of Canada Customer Care Centre is the sole authorized provider of a certification confirmation letter which helps our customers identify if their vehicles meets the required USA regulatory standards necessary for importation into the USA.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10111894 at NHTSANHTSA communication ID: 10190932
NHTSA source summary · Original PDF not reviewed by Recallfolio
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · WHEELS.
Source record 10190932 at NHTSANHTSA communication ID: 10190931
NHTSA source summary · Original PDF not reviewed by Recallfolio
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · WHEELS.
Source record 10190931 at NHTSANHTSA communication ID: 10112013
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10112013 at NHTSANHTSA communication ID: 10111997
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.
Source components: EQUIPMENT.
Source record 10111997 at NHTSANHTSA communication ID: 10111977
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are setting Diagnostic Trouble Code P0300 after engine repairs. Technician will need to ensure that injector connectors for cylinder 5-7 and 6-8 are not crossed.
Source components: ENGINE.
Source record 10111977 at NHTSANHTSA communication ID: 10190934
NHTSA source summary · Original PDF not reviewed by Recallfolio
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS.
Source record 10190934 at NHTSANHTSA communication ID: 10190933
NHTSA source summary · Original PDF not reviewed by Recallfolio
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS.
Source record 10190933 at NHTSANHTSA communication ID: 10133103
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides directions on submitting different PIRs
Source components: BACK OVER PREVENTION: SENSING SYSTEM: RADAR.
Source record 10133103 at NHTSANHTSA communication ID: 10133098
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary information bulletin provides a revision of 13-00-89-004D to include updated information.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10133098 at NHTSANHTSA communication ID: 10133086
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on how to save fuel and proper maintenance without using fuel or oil additives.
Source components: FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE · FUEL SYSTEM, OTHER.
Source record 10133086 at NHTSANHTSA communication ID: 10118885
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on brake line kits now available and how to service them on vehicle.
Source components: SERVICE BRAKES.
Source record 10118885 at NHTSANHTSA communication ID: 10118880
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides an update for 13-00-89-004C to include updated information.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10118880 at NHTSANHTSA communication ID: 10118859
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a revision for 04-06-04-047K to add the 2014 model year.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10118859 at NHTSANHTSA communication ID: 10118858
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a revision for 04-06-04-047 to add the 2014 model year.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10118858 at NHTSANHTSA communication ID: 10246645
NHTSA source summary · Original PDF not reviewed by Recallfolio
Pre-Formed and Pre-Flared Hydraulic Brake Pipe Kits Now Available for Service
Source components: SERVICE BRAKES.
Source record 10246645 at NHTSANHTSA communication ID: 10118842
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational Bulletin provides a revision for 10-08-110-001 to add the 2012-2014 model years.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10118842 at NHTSANHTSA communication ID: 10112331
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
Source components: ENGINE AND ENGINE COOLING.
Source record 10112331 at NHTSANHTSA communication ID: 10113227
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partech for assistance.
Source components: EQUIPMENT.
Source record 10113227 at NHTSANHTSA communication ID: 10246631
NHTSA source summary · Original PDF not reviewed by Recallfolio
Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
Source components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM).
Source record 10246631 at NHTSANHTSA communication ID: 10113199
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the OnStar system will not connect. Technician should record module info per the latest version of PIC4310 and contact General Motors Technical Assistance Center.
Source components: ELECTRICAL SYSTEM.
Source record 10113199 at NHTSANHTSA communication ID: 10113188
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician vehicles with a slight rough idle. Technician should compare the concern with a like vehicle. If the concern is worse than a like vehicle, technician should follow published Service Information diagnosis and repair as necessary.
Source components: STEERING:LINKAGES:ARM:IDLER AND ATTACHMENT.
Source record 10113188 at NHTSANHTSA communication ID: 10113177
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 10113177 at NHTSANHTSA communication ID: 10130567
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on key codes security rules and information on GM key code look up application.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10130567 at NHTSANHTSA communication ID: 10130562
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on key code security and information on GM key code look up applications.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10130562 at NHTSANHTSA communication ID: 10134627
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical service bulletin provides a revision for 07-08-49-020G to add the 2014 model year and update model list.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
Source record 10134627 at NHTSANHTSA communication ID: 10139078
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for Automatic Transmission Oil Cooler Flow Test Essential Tool J-45096 TransFlow.
Source components: EQUIPMENT · POWER TRAIN.
Source record 10139078 at NHTSANHTSA communication ID: 10113108
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with a clunk type noise on start up with the vehicle in park when the vehicle is equipped Allison LCT1000 transmission. This condition is considered to be an operating characteristic of the Allison LCT1000 transmission.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10113108 at NHTSANHTSA communication ID: 10139067
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a revision for 11-00-89-005D to add additional Mandatory Minimum Tables and additional information concerning Policy decision making.
Source components: EQUIPMENT.
Source record 10139067 at NHTSANHTSA communication ID: 10139066
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for Engine Squealing Type Noise on Start-up or Vibration Condition.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10139066 at NHTSANHTSA communication ID: 10139059
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a revision for 02-08-98-002C to add the 2010-2013 model years and revise the Approved Refinish Materials booklet information.
Source components: EQUIPMENT.
Source record 10139059 at NHTSANHTSA communication ID: 10139057
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a revision for 09-00-89-008 to add model years, update the Labor Operation Information and Transaction Submissions Procedure and general content updates.
Source components: EQUIPMENT.
Source record 10139057 at NHTSANHTSA communication ID: 10139049
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a revision for 05-08-48-001B to add 2010-2014 model years and update Labor Operation.
Source components: EQUIPMENT · VISIBILITY:WINDSHIELD.
Source record 10139049 at NHTSANHTSA communication ID: 10139043
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a revision for 13-00-89-004A to include updated information.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10139043 at NHTSANHTSA communication ID: 10139020
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for Squeak Noise from Rear of Vehicle Condition.
Source components: SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY.
Source record 10139020 at NHTSANHTSA communication ID: 10139019
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information on High Oil Pressure on Startup After Engine Replacement Concern.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10139019 at NHTSANHTSA communication ID: 10113074
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that after replacing the Instrument Panel Cluster the exchange center is unable to program the actual mileage on the odometer or the actual mileage is unknown. Dealer will need to follow dealer to the General Motors service policies and procedures manual section 3.2.4 odometer servicing.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · EQUIPMENT.
Source record 10113074 at NHTSANHTSA communication ID: 10130657
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a revision of 05-02-32-008D to add 2013 Model Year vehicles.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10130657 at NHTSANHTSA communication ID: 10130652
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides Warranty Administration - New Labor Codes information.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10130652 at NHTSANHTSA communication ID: 10130627
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a revision of 99-04-20-002G to add 2013-2014 model years.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10130627 at NHTSANHTSA communication ID: 10130626
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a revision of 01-08-49-017A to add new pricing information and payment terms.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10130626 at NHTSANHTSA communication ID: 10130619
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a revision of 10-00-89-017Z to include updated information.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10130619 at NHTSANHTSA communication ID: 10130610
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a revision of 02-06-01-022M to add the 2013 model year.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10130610 at NHTSANHTSA communication ID: 10134681
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on clarification of use-dealer empowerment labor operations and customer enthusiasm.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10134681 at NHTSANHTSA communication ID: 10134652
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on fix it right for first time issues.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10134652 at NHTSANHTSA communication ID: 10134640
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the appearance of chromed aluminum wheels due to chemical staining, pitting corrosion and/or spotted.
Source components: WHEELS.
Source record 10134640 at NHTSANHTSA communication ID: 10112885
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.
Source components: EQUIPMENT.
Source record 10112885 at NHTSANHTSA communication ID: 10112864
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have slack in one of the tailgate cables. Technician should not replace any parts for this concern. Please communicate to the customer this condition is a normal operating characteristic of their vehicle.
Source components: STRUCTURE:BODY:TAILGATE.
Source record 10112864 at NHTSANHTSA communication ID: 10112862
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a surge or stall when in gear at a stop. Technician will find Diagnostic Trouble Code P0742. Technician will need to isolate if the concern is transmission internal or external. Technician will need to disconnect the 20 way connector at the transmission (C-175 for model years 2001 ? 2007 and X-175 for model years 2008 ? 2013). On 2006 ? 2013 model years, using a fused jumper wire, connect terminal R of the automatic transmission inline 20-way connector to a known good ground. Technician can now run the vehicle to duplicate the concern. If the vehicle still stalls the concern has been isolated to the transmission. Inspect the Torque Converter Clutch solenoid and valve in the main valve body. If the vehicle does not stall inspect wiring between the Transmission Control Module and transmission if no concern is found swap the Transmission Control Module into a known good vehicle after clearing any Diagnostic Trouble Codes to determine if the concern follows the Transmission Control Module.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
Source record 10112862 at NHTSANHTSA communication ID: 10112857
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
Source components: ELECTRICAL SYSTEM.
Source record 10112857 at NHTSANHTSA communication ID: 10112845
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have no forward or reverse. Technician will need to check for metal debris in torque converter clutch valve.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER.
Source record 10112845 at NHTSANHTSA communication ID: 10133130
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias.
Source components: STRUCTURE:BODY.
Source record 10133130 at NHTSANHTSA communication ID: 10112702
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.
Source components: ENGINE.
Source record 10112702 at NHTSANHTSA communication ID: 10247747
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speedometer Needle Accuracy Information
Source components: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER.
Source record 10247747 at NHTSANHTSA communication ID: 10247092
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speedometer Needle Accuracy Information
Source components: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER.
Source record 10247092 at NHTSANHTSA communication ID: 10138541
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides information on the Clarification of Use for Dealer Empowerment Labor Operations and Customer Enthusiasm
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10138541 at NHTSANHTSA communication ID: 10112664
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles may have a no power or no connect concern. Technician will find that the OnStar led is red and Diagnostic Trouble Code U1500 is set. Technician will need to replace the Vehicle Communication Interface Module if the Station Identification number falls in the ranges 14,000,000 - 16,000,000 or 22,000,000 - 23,200,000.
Source components: ELECTRICAL SYSTEM.
Source record 10112664 at NHTSANHTSA communication ID: 10112641
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that fluid contamination may be directed to one of the following testing centers according to the type of fluid needing testing. Dealer should send the correct fluid to the proper testing center.
Source components: ENGINE AND ENGINE COOLING.
Source record 10112641 at NHTSANHTSA communication ID: 10126163
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10126163 at NHTSANHTSA communication ID: 10138218
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information regarding the inappropriate warranty claims submitted for damaged radios and instrument panel clusters, provides exampls on whats an acceptable for warranty and whats not
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM) · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10138218 at NHTSANHTSA communication ID: 10126171
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
Source components: EQUIPMENT.
Source record 10126171 at NHTSANHTSA communication ID: 10112600
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician with the axel setup information from American Axle Manufacturing. Technician should be advised that the maximum pinion shim to be used or stacked behind the pinion is 0.050?, and the minimum pinion shim is 0.020? for an 8.6 axle. The range for available pinion depth shims for the 10.5? axle is 0.006? to 0.024?. When setting the backlash it should be set between 0.003? to 0.005? on a new ring and pinion for any American Axle Manufacturing application. The ring and pinion can be reused or adjusted if the mileage is less than 500 miles, if not used for towing. Technician should be advised that a ?roller coaster? or ?hourglass? pattern on the bearings may be normal up to 10,000 miles and possibly longer. With a mis-machined housing you may get a heel pattern on both sides of the gear teeth at build up can generally be corrected with backlash adjustments. When setting up an 8.6? axle with a 5 cut gear set is to use a 0.035? pinion shim and set backlash to 0.004?. When using the newer 2 cut gear set also use a 0.035? pinion shim and still set backlash to 0.004?. To set the gear pattern use backlash to adjust the pattern heel to toe. Use the pinion shim to adjust the height of the pattern. The proper drive pinion bearing pre-load is from 15 - 30 inch pounds with new bearings. The total torque to turn after the differential case is installed should increase 5 - 10 inch pounds at the pinion. A new pinion nut must be used whenever the old one is removed. The axle shaft end play specification is 0.012? per side and the radial specification is 0.002? - 0.003?. Technician should be advised that synthetic lube can be used in all new American Axle Manufacturing axle assemblies. The new pinion seal for the 8.6? axle assembly is a two piece design.
Source components: POWER TRAIN:AXLE ASSEMBLY.
Source record 10112600 at NHTSANHTSA communication ID: 10138211
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.
Source components: EQUIPMENT.
Source record 10138211 at NHTSANHTSA communication ID: 10138210
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Available BCM Calibrations to Restore Bulb Outage Detection on Vehicles Produced by a Second Stage Manufacturer (Upfitter), Turn Signals Flash Fast after Factory Box Removed
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10138210 at NHTSANHTSA communication ID: 10137469
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.
Source components: EQUIPMENT.
Source record 10137469 at NHTSANHTSA communication ID: 10137468
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Available BCM Calibrations to Restore Bulb Outage Detection on Vehicles Produced by a Second Stage Manufacturer (Upfitter), Turn Signals Flash Fast after Factory Box Removed
Source components: ELECTRICAL SYSTEM.
Source record 10137468 at NHTSANHTSA communication ID: 10137458
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for requesting a new key code for customers with lost or stolen keys
Source components: EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES.
Source record 10137458 at NHTSANHTSA communication ID: 10126196
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.
Source components: EQUIPMENT.
Source record 10126196 at NHTSANHTSA communication ID: 10138200
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · STRUCTURE.
Source record 10138200 at NHTSANHTSA communication ID: 10137457
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
Source components: EQUIPMENT.
Source record 10137457 at NHTSANHTSA communication ID: 10126200
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a single point reference and strategy document to aid in reducing customer comebacks, and the possibility of buyback situations by outlining specific guidelines, strategy and forms that will assist with this goal, by identifying, clarifying and documenting customer concerns accurately at each service visit.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126200 at NHTSANHTSA communication ID: 10126198
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
Source components: EQUIPMENT.
Source record 10126198 at NHTSANHTSA communication ID: 10112560
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about brake rotors on new vehicles and replacement parts from General Motors Service Parts Operations. Technician should be advised the costing should not be removed from the brake rotor it will wear off with normal brake usage. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
Source components: SERVICE BRAKES.
Source record 10112560 at NHTSANHTSA communication ID: 10138191
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
Source components: EQUIPMENT · VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR.
Source record 10138191 at NHTSANHTSA communication ID: 10137448
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
Source components: EQUIPMENT.
Source record 10137448 at NHTSANHTSA communication ID: 10112544
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a power steering pump whine noise. Technician will need to flush and refill the power steering system with Lucas Power Steering Fluid with Conditioners. Technician will replace the power steering pump with the latest design if the fluid is not available.
Source components: SERVICE BRAKES, HYDRAULIC:POWER ASSIST · STEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID.
Source record 10112544 at NHTSANHTSA communication ID: 10138187
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides a revision for PI0688C to add the 2013 model year and update the Parts Information.
Source components: EQUIPMENT.
Source record 10138187 at NHTSANHTSA communication ID: 10137444
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides a revision for PI0688C to add the 2013 model year and update the Parts Information.
Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10137444 at NHTSANHTSA communication ID: 10112528
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that during battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the OnStar system. Technician should understand the power cycles of the various OnStar systems. All Generation 6, 7, 8, and 9 systems are powered up continuously for 48 hours from ignition off. After 120 hours from ignition off, these systems then completely power off. The Onstar modules draw: * IGN ON - 240 to 400 Milliamp. * IGN OFF - 3 to 20 Milliamp for 48 hours or 120 hours on Gen 9 and vehicle communication platforms. * IGN OFF - 0.2 to 0.8 Milliamp after 48 hours or 120 hours on Gen 9 and vehicle communication platforms.
Source components: ELECTRICAL SYSTEM.
Source record 10112528 at NHTSANHTSA communication ID: 10112494
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts. Technician can check Service Information for some accessories. Technician can also contact Partech for assistance.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10112494 at NHTSANHTSA communication ID: 10118639
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides Information on Identifying Duramax Diesel Overpower Engine Breakdown/Non-Function Due to Aftermarket Power-Up Devices vs Non Overpower Engine Non-Function of Pistons, Cylinders, Valvetrain Components, DTC P003A or P111D Set
Source components: ENGINE AND ENGINE COOLING.
Source record 10118639 at NHTSANHTSA communication ID: 10112468
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the percentage of Ultraviolet protection or tint offered by the windshield or side glass. Technician should be advised Windshield reduces Ultraviolet rays down to 4% or less. Front side door glass reduces Ultraviolet rays down to 35% or less. Windshields are SOLAR glass with a light transmittance of >/=70%. Front door glass are Solar glass with a light transmission of >/=70%. Rear door glass, quarter windows and back windows can use either Solar glass (>/=70%) or Privacy glass, which has a light transmittance of 20%.
Source components: VISIBILITY:GLASS, SIDE/REAR · VISIBILITY:WINDSHIELD.
Source record 10112468 at NHTSANHTSA communication ID: 10118626
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administrational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10118626 at NHTSANHTSA communication ID: 10246951
NHTSA source summary · Original PDF not reviewed by Recallfolio
Programming And Activation Of Replacement OnStar Modules.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10246951 at NHTSANHTSA communication ID: 10037570
NHTSA source summary · Original PDF not reviewed by Recallfolio
GM: ON SOME TRUCK MODELS THERE IS SOME FRAME CORROSION. *RM UPDATED ON 5/2/2012. *KB
Source components: STRUCTURE:FRAME AND MEMBERS.
Source record 10037570 at NHTSANHTSA communication ID: 10042986
NHTSA source summary · Original PDF not reviewed by Recallfolio
GENERAL MOTORS: INFORMATION PROVIDED BY BULLETIN FOR ALL 2012 AND PRIOR GENERAL MOTOR TRUCKS AND PASSENGER VEHICLES REGARDING THE ADJUSTABLE COMFORT AND CUSTOM UPHOLSTERY OF THE DRIVER AND THE PASSENGER HEAD RESTRAINT. *PE
Source components: SEATS:FRONT ASSEMBLY:HEAD RESTRAINT.
Source record 10042986 at NHTSANHTSA communication ID: 10022259
NHTSA source summary · Original PDF not reviewed by Recallfolio
DELAYED ENGAGEMENT WITH ALLISON TRANSMISSION, COLD HESITATION, MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED, DTC'S P0701, P1709, P1711, P1713, P0841, P0843, P0847, P0870, P0872, AND P0875. *KB
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10022259 at NHTSA