The manufacturer’s record · Page 1 of 1
Original record summaries, dates and identifiers for this model-year. Records 1–75 of 75, ordered newest first. Dated records on this page: Nov 15, 2000–Oct 4, 2023.
Back to 2001 Audi S4 problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10243930
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information on the additional reporting requirements for safety related inquiries.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243930 at NHTSANHTSA communication ID: 10198567
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · STRUCTURE.
Source record 10198567 at NHTSANHTSA communication ID: 10184530
NHTSA source summary · Original PDF not reviewed by Recallfolio
This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10184530 at NHTSANHTSA communication ID: 10127856
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
Source components: EXTERIOR LIGHTING.
Source record 10127856 at NHTSANHTSA communication ID: 10155644
NHTSA source summary · Original PDF not reviewed by Recallfolio
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.
Source components: EQUIPMENT.
Source record 10155644 at NHTSANHTSA communication ID: 10128350
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.
Source components: ENGINE.
Source record 10128350 at NHTSANHTSA communication ID: 10128222
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
Source components: EQUIPMENT.
Source record 10128222 at NHTSANHTSA communication ID: 10128009
NHTSA source summary · Original PDF not reviewed by Recallfolio
This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
Source components: WHEELS.
Source record 10128009 at NHTSANHTSA communication ID: 10123656
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 20 number 13-29 dated November 15, 2013. The fuel tank has been removed from the vehicle and must be neutralized before shipment or disposal. When the fuel tank in a vehicle is replaced, the original tank must be properly flushed to neutralize the remaining gasoline or diesel fuel.
Source components: FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE.
Source record 10123656 at NHTSANHTSA communication ID: 10123650
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 00 number 10-05 dated June 14, 2010. VIN plate and/or B-Pillar Safety Certification label requires replacement.
Source components: EQUIPMENT:OTHER:LABELS.
Source record 10123650 at NHTSANHTSA communication ID: 10123764
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10123764 at NHTSANHTSA communication ID: 10128399
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10128399 at NHTSANHTSA communication ID: 10058584
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
Source components: ENGINE.
Source record 10058584 at NHTSANHTSA communication ID: 10120052
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 97 number 10-15 dated October 20, 2010. Sporadic fault memory entries are stored in various control modules. Contacts may be widened (over 0.63 mm) if incorrect pins or incorrect methods for current flow tests are used. Either action may cause intermittent electrical connections, which can cause sporadic DTCs to be stored in various control modules.
Source components: ELECTRICAL SYSTEM.
Source record 10120052 at NHTSANHTSA communication ID: 10120003
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 94 number 12-92 dated October 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens.
Source components: EXTERIOR LIGHTING:HEADLIGHTS.
Source record 10120003 at NHTSANHTSA communication ID: 10119956
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 14-69 dated November 4, 2014. The following message appears on the MMI display: "Device or cable type not supported". The AMI cable being used is a genuine Audi-branded cable with an Audi part number (see Required Parts and Tools for a list of valid part numbers). The "Device or cable type not supported" message may be displayed when an incorrect AMI cable type is connected to the MMI system. Only cables with an Audi part number (i.e., 4F0.XXX.XXX) are supported by the MMI system. Volkswagen-branded cables look similar, but are not guaranteed to work with Audi MMI systems. The label on the end of an Audi-branded cable has an Audi logo and Audi part number. Audi-branded cables have unique firmware inside the hardware that can determine which MMI system and iOS device are connected to the cable. Volkswagen cables do not have this firmware. The firmware is required to allow the system to function normally due to the different technology available in the different MMI systems and in the different iPhones and iPod Touch devices. In addition, the AMI system was designed to play the music stored locally on the connected device only. Music streaming (from Spotify or Pandora, for example) is not supported, and music stored in the cloud (on Google Play, Amazon Prime, or iTunes Match/iCloud, for example) may drop out, pause, and skip when played.
Source components: ELECTRICAL SYSTEM.
Source record 10119956 at NHTSANHTSA communication ID: 10119945
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 10 number 13-10 dated September 5, 2013. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these metal debris pieces are not removed prior to the installation and operation of the replacement engine, they could be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Source components: ENGINE AND ENGINE COOLING.
Source record 10119945 at NHTSANHTSA communication ID: 10119940
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 13-09 dated June 21, 2013. The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in excessive accumulation of deposits on intake valves, intake manifold, fuel injectors, and combustion chambers, engine running rough after cold start, excessive engine cranking time, hesitations while driving, rough engine idle, Reduced engine performance, and/or Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire, lean fuel system, or air/fuel ratio imbalance in the engine control module. Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10119940 at NHTSANHTSA communication ID: 10119946
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 13-35 dated January 9, 2013. This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).
Source components: ENGINE AND ENGINE COOLING.
Source record 10119946 at NHTSANHTSA communication ID: 10120682
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 13-69 dated February 14, 2013. Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiring. This bulletin applies only to non-diesel engines.
Source components: ENGINE AND ENGINE COOLING.
Source record 10120682 at NHTSANHTSA communication ID: 10228302
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10228302 at NHTSANHTSA communication ID: 10224981
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10224981 at NHTSANHTSA communication ID: 10221954
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10221954 at NHTSANHTSA communication ID: 10124882
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Audi of America has started to host its TSB videos outside of ElsaPro. Doing so provides higher-quality videos, more reliable access to the videos, and the ability to view the videos on different devices.
Source components: ELECTRICAL SYSTEM.
Source record 10124882 at NHTSANHTSA communication ID: 10124898
NHTSA source summary · Original PDF not reviewed by Recallfolio
This is an advance notice for Audi of America employees. This notice contains information for the accessories operations technical bulletin.
Source components: EQUIPMENT.
Source record 10124898 at NHTSANHTSA communication ID: 10250950
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tightening wheel bolts
Source components: WHEELS.
Source record 10250950 at NHTSANHTSA communication ID: 10124751
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013. Wheel bolt requires torque adjustment.
Source components: WHEELS.
Source record 10124751 at NHTSANHTSA communication ID: 10122524
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10122524 at NHTSANHTSA communication ID: 10249054
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the State of Minnesota.
Source components: UNKNOWN OR OTHER.
Source record 10249054 at NHTSANHTSA communication ID: 10231130
NHTSA source summary · Original PDF not reviewed by Recallfolio
Idenifying and mixing factory fill engine coolants
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM.
Source record 10231130 at NHTSANHTSA communication ID: 10122415
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 13-41 dated June 20, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10122415 at NHTSANHTSA communication ID: 10231127
NHTSA source summary · Original PDF not reviewed by Recallfolio
ElsaPro Software update and technical bulletins
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231127 at NHTSANHTSA communication ID: 10212703
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Source components: POWER TRAIN.
Source record 10212703 at NHTSANHTSA communication ID: 10226529
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Source components: POWER TRAIN.
Source record 10226529 at NHTSANHTSA communication ID: 10210679
NHTSA source summary · Original PDF not reviewed by Recallfolio
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
Source components: ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE · POWER TRAIN.
Source record 10210679 at NHTSANHTSA communication ID: 10122465
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.
Source components: POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE).
Source record 10122465 at NHTSANHTSA communication ID: 10249085
NHTSA source summary · Original PDF not reviewed by Recallfolio
Google Maps Street View (NVLW))
Source components: UNKNOWN OR OTHER.
Source record 10249085 at NHTSANHTSA communication ID: 10251027
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tightening wheel bolts
Source components: WHEELS.
Source record 10251027 at NHTSANHTSA communication ID: 10121408
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should not be used to apply torque to wheel bolts. Always use a calibrated torque wrench to attain the correct wheel bolt torque and follow the proper wheel tightening procedure as outlined in Elsa. Proper use of a calibrated torque wrench ensures that all wheel bolts are tightened equally and reduces the chances of repeat repairs. Using methods other than a calibrated torque wrench to attain correct wheel bolt torque may lead to problems.
Source components: WHEELS · WHEELS:LUGS/NUTS/BOLTS/STUDS.
Source record 10121408 at NHTSANHTSA communication ID: 10054859
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10054859 at NHTSANHTSA communication ID: 10121365
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10121365 at NHTSANHTSA communication ID: 10243780
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243780 at NHTSANHTSA communication ID: 10216638
NHTSA source summary · Original PDF not reviewed by Recallfolio
If the vehicle?s engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Source components: BACK OVER PREVENTION.
Source record 10216638 at NHTSANHTSA communication ID: 10121324
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Source components: ENGINE AND ENGINE COOLING.
Source record 10121324 at NHTSANHTSA communication ID: 10243787
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243787 at NHTSANHTSA communication ID: 10228314
NHTSA source summary · Original PDF not reviewed by Recallfolio
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10228314 at NHTSANHTSA communication ID: 10224993
NHTSA source summary · Original PDF not reviewed by Recallfolio
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10224993 at NHTSANHTSA communication ID: 10221966
NHTSA source summary · Original PDF not reviewed by Recallfolio
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10221966 at NHTSANHTSA communication ID: 10123591
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine performance. Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire (example: P0300, P030x) and / or lean fuel system (example: P0171, P0174, P1128, P1130, P1136, P1138) in the engine control module (ECM). Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
Source components: ELECTRICAL SYSTEM · FUEL SYSTEM, GASOLINE.
Source record 10123591 at NHTSANHTSA communication ID: 10216662
NHTSA source summary · Original PDF not reviewed by Recallfolio
Discontinuation and mixing of Audi-approved engine coolants.
Source components: ENGINE AND ENGINE COOLING.
Source record 10216662 at NHTSANHTSA communication ID: 10123587
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10123587 at NHTSANHTSA communication ID: 10210650
NHTSA source summary · Original PDF not reviewed by Recallfolio
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who consciously or unconsciously drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. As a result, application of the brake and accelerator pedals at the same time (brake pedal with left foot and accelerator pedal with right foot) results in the following: ? Brake pedal function (normal at all times) overrides any throttle application. ? Diagnostic Trouble Codes (DTCs) will not be stored. ? When the brake pedal is applied while the accelerator is depressed, engine RPMs will return to idle speeds of 1400 RPMs after approximately two seconds. ? When the accelerator is applied while the brake pedal is depressed, the vehicle accelerates slower than usual (reduced engine torque).
Source components: SERVICE BRAKES.
Source record 10210650 at NHTSANHTSA communication ID: 10052307
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: SOME VEHICLES MAY LACK POWER OR WILL NOT MOVE AFTER STOP DUE TO SIMULTANEOUSLY DEPRESSING THE BRAKE AND ACCELERATOR PEDALS. *JS
Source components: VEHICLE SPEED CONTROL.
Source record 10052307 at NHTSANHTSA communication ID: 10216656
NHTSA source summary · Original PDF not reviewed by Recallfolio
Discontinuation and mixing of Audi-approved engine coolants.
Source components: ENGINE AND ENGINE COOLING.
Source record 10216656 at NHTSANHTSA communication ID: 10123901
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011. This TSB contains information on technician preparation when calling the Audi Technical Assistance Center
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10123901 at NHTSANHTSA communication ID: 10123882
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10123882 at NHTSANHTSA communication ID: 10216682
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine oils that meet Audi Oil Quality Standards.
Source components: ENGINE AND ENGINE COOLING.
Source record 10216682 at NHTSANHTSA communication ID: 10122766
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens. Damp air settles on the inside of a cold lens, which creates condensation. The headlight circulation system allows air from the outside to flow through the headlights. This open waterprotected ventilation system (needed for pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively cool areas, where the lens is cooled own by the air flow. Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end, with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.
Source components: EXTERIOR LIGHTING.
Source record 10122766 at NHTSANHTSA communication ID: 10122799
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 12 - 31 dated August 30, 2012. Oil consumption measurement - Repair Authorization (CA). In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil.
Source components: ENGINE.
Source record 10122799 at NHTSANHTSA communication ID: 10250430
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil consumption measurement - Repair Authorization (CA)
Source components: ENGINE AND ENGINE COOLING.
Source record 10250430 at NHTSANHTSA communication ID: 10036497
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: GASOLINE ENGINE VEHICLES; INSPECT, AND IF NECESSARY, REPLACE IGNITION COILS. VEHICLES AFFECTED BY THIS ACTION MAY HAVE IGNITION COILS THAT COULD MALFUNCTION UNDER CERTAIN CONDITIONS. ADDED FINAL MAILING PHASE-8/10 VIN INFORMATION. MODELS A4/CABRIOLET; TT; A3; A8; A6; S4; ALLROAD; RS4; Q7; S6; S8. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE.
Source record 10036497 at NHTSANHTSA communication ID: 10033212
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: (REVISED) VEHICLES AFFECTED BY THIS ACTION MAY HAVE IGNITION COILS THAT COULD MALFUNCTION UNDER CERTAIN CONDITIONS. IF THIS HAPPENS, THE MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE TO LET YOU KNOW THAT THE VEHICLE MAY EXPERIENCE SOME DETERIORATION IN PERFORMANCE. IN SOME CASES, A MALFUNCTIONING IGNITION COIL MAY CAUSE A VEHICLE TO EXCEED FEDERAL AND/OR CALIFORNIA EMISSIONS STANDARDS. *PE UPDATED 8/9/10. *PE UPDATED 8/11/10. *PE UPDATED 11/8/10. *PE UPDATED 11/10/10. *PE UPDATED 1/10/11. *PE
Source components: ELECTRICAL SYSTEM:IGNITION · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE.
Source record 10033212 at NHTSANHTSA communication ID: 10027923
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: WHEEL BOLTS REQUIRE TORQUE ADJUSTMENT. TORQUE STICKS AND TORQUE EXTENSION BARS ARE NOT APPROVED BY AUDI OF AMERICA, INC. AND SHOULD NOT BE USED TO APPLY TORQUE TO WHEEL BOLTS. ALL AUDI MODELS INCLUDED. *PE
Source components: WHEELS:LUGS/NUTS/BOLTS/STUDS.
Source record 10027923 at NHTSANHTSA communication ID: 10022142
NHTSA source summary · Original PDF not reviewed by Recallfolio
LOSES POWER OR WILL NOT MOVE AFTER STOP. *KB
Source components: ENGINE AND ENGINE COOLING:ENGINE.
Source record 10022142 at NHTSANHTSA communication ID: 10022141
NHTSA source summary · Original PDF not reviewed by Recallfolio
HEADLIGHT AIMING, USING HELLA UNIVERSAL BEAMSETTER. *KB
Source components: EXTERIOR LIGHTING:HEADLIGHTS.
Source record 10022141 at NHTSANHTSA communication ID: 10018217
NHTSA source summary · Original PDF not reviewed by Recallfolio
OIL LEAKS FROM UPPER ENGINE AREAS, DIAGNOSTIC GUIDELINES. *TT
Source components: ENGINE AND ENGINE COOLING.
Source record 10018217 at NHTSANHTSA communication ID: 10016518
NHTSA source summary · Original PDF not reviewed by Recallfolio
UNNECESSARY ECM AND/OR ACCELERATOR PEDAL REPLACEMENT. *TT
Source components: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL.
Source record 10016518 at NHTSANHTSA communication ID: 10015101
NHTSA source summary · Original PDF not reviewed by Recallfolio
SECONDARY AIR INJECTION (AIR) PUMP MOTOR -V101- IS NOISY. *TT
Source components: ENGINE AND ENGINE COOLING.
Source record 10015101 at NHTSANHTSA communication ID: 10009732
NHTSA source summary · Original PDF not reviewed by Recallfolio
LONG TERM FUEL TRIM - SYSTEM TOO RICH. DIAGNOSTIC TROUBLE CODE P1123, P1125, P1137 AND P1139. *TT
Source components: FUEL SYSTEM, OTHER.
Source record 10009732 at NHTSANHTSA communication ID: 10009879
NHTSA source summary · Original PDF not reviewed by Recallfolio
VALVE COVER, DIAGNOSING OIL LEAKAGE FROM GASKETS. *TT
Source components: ENGINE AND ENGINE COOLING:ENGINE.
Source record 10009879 at NHTSANHTSA communication ID: 10009877
NHTSA source summary · Original PDF not reviewed by Recallfolio
UDPATE PROGRAMMING (FLASHING) ENGINE CONTROL MODULE (ECM) TO CORRECT COLD START ENGINE STUMBLE. *TT
Source components: ENGINE AND ENGINE COOLING:ENGINE.
Source record 10009877 at NHTSANHTSA communication ID: 627061
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBJECT REGARDING REAR LID, LUBRICATING HINGES TO ALLEVIATE STIFFNESS. *JG
Source components: STRUCTURE:BODY:TRUNK LID.
Source record 627061 at NHTSANHTSA communication ID: 615876
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS SAMPLE LETTER PROVIDES INFORMATION ON THE SPECIALLY DESIGNED LOW ASPECT RATIO, ULTRA HIGH PERFORMANCE TIRES. *TT
Source components: TIRES.
Source record 615876 at NHTSANHTSA communication ID: 615875
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS LETTER ADDRESSES DEFECT ALLEGATIONS MADE IN THE SEPTEMBER 25TH ISSUE OF BUSINESS WEEK WITH RESPECT TO THE BRIDGESTONE RE040 LOW ASPECT RATIO, ULTRA HIGH PERFORMANCE TIRES. *TT
Source components: TIRES.
Source record 615875 at NHTSANHTSA communication ID: 615874
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBJECT REGARDING AUDI OF AMERICA, INC. CUSTOMER SATISFACTION PROGRAM FOR CERTAIN VEHICLES EQUIPPED WITH 225 / 45R17 / 91Y LOW ASPECT RATIO, ULTRA HIGH PERFORMANCE TIRES. *TT
Source components: TIRES.
Source record 615874 at NHTSA