4014412018194
NHTSA communication ID: 10250665
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shock absorber leaks: assessment aid
Source components: EQUIPMENT · STRUCTURE.
Source record 10250665 at NHTSAThe manufacturer’s record · Page 3 of 5
2007 Audi A6
Manufacturer communications & TSBs.Page 3
Original record summaries, dates and identifiers for this model-year. Records 201–300 of 413, ordered newest first. Dated records on this page: Jun 21, 2013–Jul 2, 2014.
Back to 2007 Audi A6 problems & recallsRead the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
A401441 2018194-
NHTSA communication ID: 10122540
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 40 number 13-34 dated September 23, 2013. Oil appears on one or several shock absorbers.
Source components: SUSPENSION:FRONT:SHOCK ABSORBER · SUSPENSION:REAR:SHOCK ABSORBER.
Source record 10122540 at NHTSAEdition92
NHTSA communication ID: 10231130
NHTSA source summary · Original PDF not reviewed by Recallfolio
Idenifying and mixing factory fill engine coolants
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM.
Source record 10231130 at NHTSAA911448 2036482-
NHTSA communication ID: 10122425
NHTSA source summary · Original PDF not reviewed by Recallfolio
The volume of the radio, navigation announcements, or output of the Bluetooth telephone system changes when the ignition is switched off, then switched back on, the volume is muted, then unmuted, and the MMI is switched off by a long press of the volume knob, then restarted without an ignition cycle. All vehicles with MMI 2G/3G/3G+/MIB Navigation are affected.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.
Source record 10122425 at NHTSA2036482/1
NHTSA communication ID: 10066395
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM.
Source record 10066395 at NHTSAA191450 2025303-
NHTSA communication ID: 10122415
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 13-41 dated June 20, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10122415 at NHTSAEdition90
NHTSA communication ID: 10231128
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231128 at NHTSAEDITION 90
NHTSA communication ID: 10067696
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM.
Source record 10067696 at NHTSAEdition89
NHTSA communication ID: 10231127
NHTSA source summary · Original PDF not reviewed by Recallfolio
ElsaPro Software update and technical bulletins
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231127 at NHTSA37143120130025
NHTSA communication ID: 10226530
NHTSA source summary · Original PDF not reviewed by Recallfolio
ATF pan leaks
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10226530 at NHTSA37 14 31 2013002
NHTSA communication ID: 10210680
NHTSA source summary · Original PDF not reviewed by Recallfolio
As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak. Automatic transmission fluid is leaking at the sump pan gasket.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:SEALS/GASKETS.
Source record 10210680 at NHTSAA371431 2013002-
NHTSA communication ID: 10122418
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 37 number 11-19 dated January 31, 2011. Automatic transmission fluid is leaking at the sump pan gasket. As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION · POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES.
Source record 10122418 at NHTSA48145920172667
NHTSA communication ID: 10250968
NHTSA source summary · Original PDF not reviewed by Recallfolio
Electric steering column adjustment is inoperative
Source components: STEERING.
Source record 10250968 at NHTSAA481459 2017266-
NHTSA communication ID: 10122420
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 48 number 13-51 dated August 30, 2013. Electrically-adjustable steering column adjustment is restricted and does not adjust vertically. Incorrect operation of Easy Entry is not the cause. It is unlikely that external forces have led to the loss of the stored end positions of the adjustment movement. See TSB 2015819, 48 Easy Entry function of the power adjustable steering column intermittently does not work, for more information. Seat adjustments can be used to maintain the 10-inch minimum recommended distance from the steering wheel in case of airbag deployment. The axial adjustment is still functional during this condition. The steering column may be under tension due to unfavorable tolerances of the steering column and module cross carrier. As a result, the current draw of the regulator motors is above specification, which causes the electric steering column adjustment to fail. Once the vehicle electrical system control module, J519 (address word 09), detects an excessive current draw, the basic settings will be erased. If basic settings are not stored in the vehicle electrical system control module, the module will not send voltage/current to the motor to operate the vertical adjustment.
Source components: ELECTRICAL SYSTEM · POWER TRAIN · STEERING.
Source record 10122420 at NHTSATSB-48-14-62
NHTSA communication ID: 10056441
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: ELECTRICALLY ADJUSTABLE STEERING COLUMN ADJUSTMENT FAILS TO ADJUST VERTICAL AND IS RESTRICTED AND UNDER TENSION DUE TO MODULE CROSS CARRIER AND UNFAVORABLE TOLERANCES TO STEERING COLUMN. MODEL 2003-2010 A8, 2005-2011 A6, 2007-2014 Q7. *PE
Source components: STEERING:COLUMN · STEERING:ELECTRIC POWER ASSIST SYSTEM.
Source record 10056441 at NHTSA37 13 07 2033658
NHTSA communication ID: 10212703
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Source components: POWER TRAIN.
Source record 10212703 at NHTSA37143020036586
NHTSA communication ID: 10226529
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Source components: POWER TRAIN.
Source record 10226529 at NHTSA37 14 30 2003658
NHTSA communication ID: 10210679
NHTSA source summary · Original PDF not reviewed by Recallfolio
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
Source components: ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE · POWER TRAIN.
Source record 10210679 at NHTSAA371430 2003658-
NHTSA communication ID: 10122465
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.
Source components: POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE).
Source record 10122465 at NHTSAUpdate91i8
NHTSA communication ID: 10249085
NHTSA source summary · Original PDF not reviewed by Recallfolio
Google Maps Street View (NVLW))
Source components: UNKNOWN OR OTHER.
Source record 10249085 at NHTSAA571401 2031413-
NHTSA communication ID: 10122471
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 57 number 12-78 dated October 26, 2012. The seat memory does not work. The MMI displays a message that the memory function is not active. The seat memory control unit can be deactivated due to voltage fluctuations in the vehicle?s power system, or from a large static discharge through the seat cover. If the seat memory control unit is deactivated due to either of these influences, the control unit cannot be reactivated through any vehicle controls, vehicle keys, or through the normal GFF test plans. It can only be reactivated with special test plans within the tester.
Source components: SEATS.
Source record 10122471 at NHTSA2031413/2
NHTSA communication ID: 10066323
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM.
Source record 10066323 at NHTSA27 14 24 2025360
NHTSA communication ID: 10212673
NHTSA source summary · Original PDF not reviewed by Recallfolio
Low battery charge: Diagnosis tips and TAC instructions
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10212673 at NHTSA27 14 24 2025360
NHTSA communication ID: 10210621
NHTSA source summary · Original PDF not reviewed by Recallfolio
This TSB provides basic diagnosis steps for discharged batteries, general tips for working with batteries, and system verification steps to ensure that the vehicle is configured correctly. For additional information on known current draw issues, refer to the following TSBs: ? 2014127: 27 Battery dead or low after returning to the vehicle (2007 A6, A8, Q7) ? 2019143: 27 Battery discharged on some vehicles with Advanced Key (2005 - 2008 A6, Q7)
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10210621 at NHTSAA271424 2025360-
NHTSA communication ID: 10122336
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 27 number 12-12 dated February 28, 2012. Customer may report that the vehicle does not start due to a discharged battery. The vehicle has either a battery diagnostic management control module or a battery energy management control module. This TSB provides basic diagnosis steps for discharged batteries, general tips for working with batteries, and system verification steps to ensure that the vehicle is configured correctly.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10122336 at NHTSAA871449 2020124-
NHTSA communication ID: 10122349
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 13-44 dated August 26, 2013. Air conditioning is inoperative. The HVAC blower functions normally. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Q5 vehicles. The A6 and A8 are not affected by this type of failure.The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10122349 at NHTSA147620194853
NHTSA communication ID: 10216613
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vacuum line cracks.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10216613 at NHTSAA011476 2019485-
NHTSA communication ID: 10122331
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 24 number 10-22 dated June 2, 2010. The MIL is on. DTCs are stored in the ECM. There may be slight power reduction at high RPMs. This condition does not cause stalling. Vacuum line cracks.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10122331 at NHTSA2019485/3
NHTSA communication ID: 10065428
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM.
Source record 10065428 at NHTSAA911437 2030947-
NHTSA communication ID: 10122359
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 13-92 dated July 16, 2013. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone receives the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call because it assumes that the phone is not responding.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.
Source record 10122359 at NHTSAA911435 2026895-
NHTSA communication ID: 10122357
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 14-19 dated January 3, 2014. Customer complains that during Bluetooth calls, the person at the other end has trouble hearing the speaker in the vehicle. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10122357 at NHTSA144920284402
NHTSA communication ID: 10216651
NHTSA source summary · Original PDF not reviewed by Recallfolio
The customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. ? When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. ? There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Source components: BACK OVER PREVENTION:DISPLAY FUNCTION.
Source record 10216651 at NHTSAA171449 2028440-
NHTSA communication ID: 10122332
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 12-26 dated January 20, 2012. When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. The displayed vehicle range drops inconsistently. After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
Source record 10122332 at NHTSAEdition79
NHTSA communication ID: 10231135
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231135 at NHTSAA911429 2026888-
NHTSA communication ID: 10122302
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 12-50 dated August 1, 2012. Echo effects, caller on either end cannot hear conversation, sound distortion or feedback, and the sound is distorted, hisses, or scrapes occur during a phone call. This bulletin provides guidelines for analyzing the call quality of the Bluetooth system in the vehicle, and is not applicable to any Audi warranty.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10122302 at NHTSAEdition77
NHTSA communication ID: 10231133
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231133 at NHTSAEdition84
NHTSA communication ID: 10231136
NHTSA source summary · Original PDF not reviewed by Recallfolio
ElsaPro Tip: "notes"
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231136 at NHTSAA871447 2010146-
NHTSA communication ID: 10125561
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 12-27 dated April 24, 2012. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10125561 at NHTSAA911424 2020399-
NHTSA communication ID: 10122204
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 09-30 dated April 14, 2009. The Audi MMI system will not play audio files from an SD card. The MMI system does not recognize the audio files on the SD card. The MMI system reports that the audio files on the SD card are damaged. The audio files on the SD card will play on one Audi vehicle, but will not play on a different Audi vehicle.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10122204 at NHTSAEdition69
NHTSA communication ID: 10231122
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231122 at NHTSA01145720151069
NHTSA communication ID: 10228387
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.
Source components: ELECTRICAL SYSTEM.
Source record 10228387 at NHTSA01145720151069
NHTSA communication ID: 10225066
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10225066 at NHTSA01145720151069
NHTSA communication ID: 10222039
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10222039 at NHTSAA461466 2022584-
NHTSA communication ID: 10122192
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 46 number 12-23 dated June 18, 2012. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. Document contains the brake pulsation diagnostic guidelines.
Source components: SERVICE BRAKES, HYDRAULIC · STEERING · WHEELS.
Source record 10122192 at NHTSAA011457 2015106-
NHTSA communication ID: 10122178
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 24 number 11-06 dated December 7, 2011. The MIL is on. DTCs are stored in the ECM. Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance. Comparing Measured Value Block 103 with 106 is not an accurate method for diagnosing G410. In order to diagnose G410 accurately, use a mechanical gauge and compare results with the low-side fuel pressure Actual Value in Measured Value Block 103.
Source components: ENGINE.
Source record 10122178 at NHTSAA911419 2026895-
NHTSA communication ID: 10122199
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 11-16 dated October 5, 2011. During a Bluetooth call, the sound is difficult to hear for the other party. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.
Source components: ELECTRICAL SYSTEM.
Source record 10122199 at NHTSA01135020301922
NHTSA communication ID: 10228345
NHTSA source summary · Original PDF not reviewed by Recallfolio
A deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
Source components: ENGINE AND ENGINE COOLING.
Source record 10228345 at NHTSA01135020301922
NHTSA communication ID: 10225024
NHTSA source summary · Original PDF not reviewed by Recallfolio
A deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
Source components: ENGINE AND ENGINE COOLING.
Source record 10225024 at NHTSA01135020301922
NHTSA communication ID: 10221997
NHTSA source summary · Original PDF not reviewed by Recallfolio
A deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
Source components: ENGINE AND ENGINE COOLING.
Source record 10221997 at NHTSAA011350 2030192-
NHTSA communication ID: 10121996
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 12-55 dated October 22, 2012. MIL on. DTCs are stored in the engine control module (ECM). Engine may have reduced power without significant loss of power or stalling. A deformed oil seal behind the potentiometer causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs. When the potentiometer is removed, the oil seal can be seen.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN · STEERING.
Source record 10121996 at NHTSA44134620103345
NHTSA communication ID: 10251027
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tightening wheel bolts
Source components: WHEELS.
Source record 10251027 at NHTSAA441346 2010334-
NHTSA communication ID: 10121408
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should not be used to apply torque to wheel bolts. Always use a calibrated torque wrench to attain the correct wheel bolt torque and follow the proper wheel tightening procedure as outlined in Elsa. Proper use of a calibrated torque wrench ensures that all wheel bolts are tightened equally and reduces the chances of repeat repairs. Using methods other than a calibrated torque wrench to attain correct wheel bolt torque may lead to problems.
Source components: WHEELS · WHEELS:LUGS/NUTS/BOLTS/STUDS.
Source record 10121408 at NHTSATSB-44-13-46
NHTSA communication ID: 10054859
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10054859 at NHTSAEdition61
NHTSA communication ID: 10243770
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243770 at NHTSA9113142013790 8
NHTSA communication ID: 10204503
NHTSA source summary · Original PDF not reviewed by Recallfolio
The navigation DVD or other CD/DVD cannot be ejected.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10204503 at NHTSAA911314 2013790-
NHTSA communication ID: 10121511
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 11-25 dated November 29, 2011. The navigation DVD or other CD/DVD cannot be ejected. There are no DTCs stored in the corresponding module. The eject button is not stuck. When the eject button is pushed, the drive does not sound as if it is trying to eject the CD/DVD. Vehicles with DVD-based navigation systems now have the navigation DVD installed during production. To prevent theft of the DVD during transportation, the eject button of the navigation drive is disabled. The navigation system itself (e.g., route guidance) functions as specified. The eject buttons of vehicles without DVD-based navigation systems are not disabled during production, but could behave as described in the Condition section of this bulletin. The eject button can be enabled through Guided Fault Finding.
Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10121511 at NHTSAAudi Newsletter
NHTSA communication ID: 10204514
NHTSA source summary · Original PDF not reviewed by Recallfolio
Several weeks ago, the ODIS Quick Reference Guide was sent to all dealer technicians (non-corporate
Source components: EQUIPMENT.
Source record 10204514 at NHTSAA571397 2022032-
NHTSA communication ID: 10121311
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 57 number 13-92 dated August 1, 2013. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle ?locked itself?. The lock command history is stored in the convenience system control module (J393).
Source components: ELECTRICAL SYSTEM.
Source record 10121311 at NHTSAReference-Oil Ca
NHTSA communication ID: 10121987
NHTSA source summary · Original PDF not reviewed by Recallfolio
This document contains the Audi oil capacity chart.
Source components: ENGINE · EQUIPMENT · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10121987 at NHTSAEdition58
NHTSA communication ID: 10243775
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243775 at NHTSAA741313 2018257-
NHTSA communication ID: 10121946
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 74 number 13-10 dated September 13, 2013. The head restraint feed-through hole is visible on the seat backrest cover. Depending on how the customer enters the vehicle, the leather backrest cover may be pulled forward, exposing the feed-through hole for the head restraint. This condition only affects vehicles with S-line sport seats.
Source components: SEATS:FRONT ASSEMBLY:HEAD RESTRAINT.
Source record 10121946 at NHTSA2018257/5
NHTSA communication ID: 10068116
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: SEATS.
Source record 10068116 at NHTSA27 13 19 2029010
NHTSA communication ID: 10212668
NHTSA source summary · Original PDF not reviewed by Recallfolio
Low battery charge: excess current draw location
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10212668 at NHTSAA271319 2029010-
NHTSA communication ID: 10121306
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 27 number 12-13 dated March 22, 2012. The customer may report a discharged battery when trying to start the vehicle. The condition results in a no start.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10121306 at NHTSA741312 2004327-4
NHTSA communication ID: 10121945
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 70 number 08-39 dated December 4, 2008. Leather upholstery is dirty or stained.
Source components: EQUIPMENT · STRUCTURE.
Source record 10121945 at NHTSAChart
NHTSA communication ID: 10243918
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Oil Capacity Chart
Source components: FUEL SYSTEM, OTHER.
Source record 10243918 at NHTSAA571394 2035367-
NHTSA communication ID: 10121345
NHTSA source summary · Original PDF not reviewed by Recallfolio
Various features in the rear passenger compartment are inoperative. Some features may include power rear windows, rear climate control operating unit, rear sunroof panel, rear reading lamps, rear cigarette lighters, etc. By design, many electronically-controlled features in the rear passenger compartment, in addition to the power rear windows, are deactivated if the child lock in the driver's door is activated.
Source components: EQUIPMENT.
Source record 10121345 at NHTSA40133420181945
NHTSA communication ID: 10250999
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shock absorber leaks: assessment aid
Source components: SUSPENSION:FRONT:SHOCK ABSORBER · SUSPENSION:REAR:SHOCK ABSORBER.
Source record 10250999 at NHTSA4013342018194
NHTSA communication ID: 10250658
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shock absorber leaks: assessment aid
Source components: BACK OVER PREVENTION · STRUCTURE.
Source record 10250658 at NHTSAA901341 2010353-
NHTSA communication ID: 10121365
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10121365 at NHTSAA401334 2018194-
NHTSA communication ID: 10121331
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 40 number 10-04 dated April 1, 2010. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber. As a result of a leak because the shock absorber is damaged. As a result of residue from when the shock was filled during production, or of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
Source components: SUSPENSION.
Source record 10121331 at NHTSA43132320187659
NHTSA communication ID: 10251016
NHTSA source summary · Original PDF not reviewed by Recallfolio
Self-leveling compressor inoperative
Source components: SUSPENSION.
Source record 10251016 at NHTSAEdition53
NHTSA communication ID: 10243780
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243780 at NHTSAA431323 2018765-
NHTSA communication ID: 10121335
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 43 number 13-14 dated April 11, 2013. The self-leveling system can no longer be adjusted with the MMI. The compressor for the self-leveling system continues to run after the engine has been switched off and the vehicle has been locked. DTCs may be stored in the level control system module. Because of poor performance or failure of the air suspension compressor, the vehicle ride height cannot be adjusted. As a safeguard, the control module will lower the vehicle to the lowest position and illuminate the warning light. Drivability is not affected.
Source components: SERVICE BRAKES, AIR:SUPPLY:COMPRESSOR.
Source record 10121335 at NHTSAA741310 2018257-
NHTSA communication ID: 10121360
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 74 number 09-01 dated September 21, 2009. The head restraint feed-through hole is visible on the seat backrest cover.Depending on how the customer enters the vehicle, the leather backrest cover may be pulled forward, exposing the feed-through hole for the head restraint. This condition only affects vehicles with S-line sport seats.
Source components: SEATS.
Source record 10121360 at NHTSAA481354 2028220-
NHTSA communication ID: 10121342
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 48 number 12-30 dated June 25, 2012. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
Source components: STEERING · WHEELS.
Source record 10121342 at NHTSA2018257/4
NHTSA communication ID: 10068113
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: SEATS.
Source record 10068113 at NHTSAA911304 2013422-
NHTSA communication ID: 10121367
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
Source components: ELECTRICAL SYSTEM.
Source record 10121367 at NHTSA131020182884
NHTSA communication ID: 10216638
NHTSA source summary · Original PDF not reviewed by Recallfolio
If the vehicle?s engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Source components: BACK OVER PREVENTION.
Source record 10216638 at NHTSAA101310 2018288-
NHTSA communication ID: 10121324
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Source components: ENGINE AND ENGINE COOLING.
Source record 10121324 at NHTSAA481351 2017266-
NHTSA communication ID: 10124650
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 48 number 10-09 dated August 13, 2010. Electric steering column adjustment is restricted or does not work at all. Incorrect operation of Easy Entry is not the cause. It is unlikely that external forces have led to the loss of the stored end positions of the adjustment movement. See TSB 2015819, 48 Easy Entry function of the power adjustable steering column intermittently does not work, for more information. The seat adjustments can be used to maintain the 10-inch minimum recommended distance from the steering wheel in case of airbag deployment. The steering column may be under tension due to unfavorable tolerances of the steering column and module cross carrier. As a result, the current draw of the regulator motors is above specification, so the electric steering column adjustment fails.
Source components: STEERING.
Source record 10124650 at NHTSAA911302 2018187-
NHTSA communication ID: 10124638
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10124638 at NHTSAA481349 2015819-
NHTSA communication ID: 10124652
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 48 number 13-43 dated April 19, 2013. The customer may report that the Easy Entry function of the power adjustable steering column intermittently does not work.
Source components: STEERING:ELECTRIC POWER ASSIST SYSTEM.
Source record 10124652 at NHTSAA871344 2020124-
NHTSA communication ID: 10124641
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 13-43 dated July 12, 2013. Air conditioning is inoperative. The HVAC blower functions normally. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Q5 vehicles. The A6 and A8 are not affected by this type of failure. The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged. Sensor G395 is a LIN slave of the vehicle electrical system control module. The vehicle electrical system control module transfers the information provided by the sensor via the comfort data bus to the climate control module, J255.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10124641 at NHTSAA641329 2020552-
NHTSA communication ID: 10124645
NHTSA source summary · Original PDF not reviewed by Recallfolio
Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
Source components: VISIBILITY:WINDSHIELD.
Source record 10124645 at NHTSAA461353 2034181-
NHTSA communication ID: 10124660
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer may report hearing brake noise from front or rear brakes. Customers may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
Source components: SERVICE BRAKES.
Source record 10124660 at NHTSA2013_06_ATU Audi
NHTSA communication ID: 10124690
NHTSA source summary · Original PDF not reviewed by Recallfolio
This document contains information on the Audi side assist update.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10124690 at NHTSA2013 06 Audi Bra
NHTSA communication ID: 10124687
NHTSA source summary · Original PDF not reviewed by Recallfolio
This document contains information on the Audi braking guard.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · SERVICE BRAKES.
Source record 10124687 at NHTSAA571392 2022032-
NHTSA communication ID: 10124648
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 57 number 11-49 dated August 8, 2011. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle "locked itself". The lock command history is stored in the convenience system control module (J393).
Source components: LATCHES/LOCKS/LINKAGES:DOORS:LATCH.
Source record 10124648 at NHTSAEdition46
NHTSA communication ID: 10243791
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243791 at NHTSAEdition45
NHTSA communication ID: 10243790
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243790 at NHTSA37 13 09 2028715
NHTSA communication ID: 10210652
NHTSA source summary · Original PDF not reviewed by Recallfolio
After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS.
Source record 10210652 at NHTSAA371309 2028715-
NHTSA communication ID: 10124499
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 37 number 12-40 dated February 28, 2012. Rough gear changes, both when accelerating and when slowing down. There is a rough driving power disruption that occurs sporadically and lasts for less than a second. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
Source components: POWER TRAIN.
Source record 10124499 at NHTSATSB-37-13-09
NHTSA communication ID: 10053883
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: IN SOME VEHICLES, THE CLUTCHES, AFTER HAVING TORQUE CONVERTER, COMPLETE GEARBOX REPLACEMENT OR MECHATRONICS, MUST ADAPT TO NEW COMPONENTS WITH GRADUAL MOVING OF CLUTCH LININGS IN MOST DIVERSE LOAD CONDITIONS. MODELS 2004-14, A3, TT, Q7, A4, A5, A6, A7, A8, Q5, S4, S5, S6, S7, RS5. *PE
Source components: STEERING:GEAR BOX (OTHER THAN RACK AND PINION).
Source record 10053883 at NHTSAA911392 2030947-
NHTSA communication ID: 10124525
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 12-61 dated September 25, 2012. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone gets the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call assuming the phone is not responding.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.
Source record 10124525 at NHTSAA871343 2020124-
NHTSA communication ID: 10124520
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 13-42 dated June 11, 2013. Air conditioning is inoperative. The HVAC blower functions normally. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Audi Q5 vehicles. The A6 and A8 are not affected by this type of failure. The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged. Sensor G395 is a LIN slave of the vehicle electrical system control module. The vehicle electrical system control module transfers the information provided by the sensor via the comfort data bus to the climate control module, J255.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10124520 at NHTSAA961367 2019260-
NHTSA communication ID: 10124574
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 96 number 12-37 dated June 11, 2012. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer's door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 Model Years 2005 - 2006 and A3 Model Year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer's HomeLink® opener system is using an alternate code. The handheld transmitter's programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10124574 at NHTSAA461347 2034387-
NHTSA communication ID: 10124505
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer may report sporadically hearing the parking brake being actuated after the vehicle has been switched off. If the customer does not identify the sound as the sound of the parking brake being actuated, he or she may simply complain of hearing noises from the rear brakes. Ignition is switched off. Steering is locked. Park is selected. Parking brake is not engaged. If the electro-mechanical parking brake is not operated for some time, the free play between brake pads and brake discs increases because of normal brake pad wear. The parking brake control unit performs an automatic correction about every 621 miles (1,000 km). On A8 models, the brake pad thickness is also calculated.
Source components: ELECTRICAL SYSTEM · PARKING BRAKE.
Source record 10124505 at NHTSAEdition42
NHTSA communication ID: 10243787
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243787 at NHTSA01130920147538
NHTSA communication ID: 10228314
NHTSA source summary · Original PDF not reviewed by Recallfolio
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10228314 at NHTSA