The manufacturer’s record · Page 2 of 4
Original record summaries, dates and identifiers for this model-year. Records 101–200 of 356, ordered newest first. Dated records on this page: Dec 9, 2013–May 10, 2017.
Back to 2006 Audi A4 problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10128350
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.
Source components: ENGINE.
Source record 10128350 at NHTSANHTSA communication ID: 10128354
NHTSA source summary · Original PDF not reviewed by Recallfolio
69N1, 69N2 - Campaign Parts Bulletin - Today, May 5th is the final standard weekly allocation of Takata airbag inflators. After this date, Takata allocations will be based on the previous week?s paid claim volume. It is CRITICAL that claims are submitted in a timely fashion in order to receive an appropriate volume of additional parts to support demand.
Source components: AIR BAGS.
Source record 10128354 at NHTSANHTSA communication ID: 10128374
NHTSA source summary · Original PDF not reviewed by Recallfolio
69N1, 69N2 and 69O2 - Campaign Tip -Takata part return label information
Source components: EQUIPMENT:OTHER:LABELS.
Source record 10128374 at NHTSANHTSA communication ID: 10128205
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin contains instructions for sychronizing the remote key after the battery has been disconnected or replaced.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10128205 at NHTSANHTSA communication ID: 10231132
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231132 at NHTSANHTSA communication ID: 10128222
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
Source components: EQUIPMENT.
Source record 10128222 at NHTSANHTSA communication ID: 10128009
NHTSA source summary · Original PDF not reviewed by Recallfolio
This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
Source components: WHEELS.
Source record 10128009 at NHTSANHTSA communication ID: 10120523
NHTSA source summary · Original PDF not reviewed by Recallfolio
Takata Recall Campaign - Communication Toolkit for Dealers
Source components: AIR BAGS.
Source record 10120523 at NHTSANHTSA communication ID: 10123658
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 40 number 14-41 dated July 2, 2014. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber As a result of a leak because the shock absorber is damaged. Oil may appear on a shock absorber As a result of residue from when the shock was filled during production, or as a result of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
Source components: SUSPENSION:FRONT:SHOCK ABSORBER · SUSPENSION:REAR:SHOCK ABSORBER.
Source record 10123658 at NHTSANHTSA communication ID: 10123656
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 20 number 13-29 dated November 15, 2013. The fuel tank has been removed from the vehicle and must be neutralized before shipment or disposal. When the fuel tank in a vehicle is replaced, the original tank must be properly flushed to neutralize the remaining gasoline or diesel fuel.
Source components: FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE.
Source record 10123656 at NHTSANHTSA communication ID: 10123653
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 14-49 dated April 3, 2014. When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. The displayed vehicle range drops inconsistently. After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY.
Source record 10123653 at NHTSANHTSA communication ID: 10123650
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 00 number 10-05 dated June 14, 2010. VIN plate and/or B-Pillar Safety Certification label requires replacement.
Source components: EQUIPMENT:OTHER:LABELS.
Source record 10123650 at NHTSANHTSA communication ID: 10123667
NHTSA source summary · Original PDF not reviewed by Recallfolio
The traffic feature in the MMI navigation is inoperative. If the vehicle is a model year 2016 A6 or A7, see TSB 2042013: 91 Audi connect online destination search, Google Earth navigation view, or INRIX online traffic is not available. There is a known server issue that can only be resolved through a change to the Audi AG backend server. Audi has changed traffic providers over the years as new technologies have developed. This bulletin provides an overview of the different systems and the basic checks that can be performed to diagnose complaints related to traffic in the MMI navigation system.
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10123667 at NHTSANHTSA communication ID: 10123716
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 46 number 14-86 dated July 14, 2014. DO NOT use this TSB if there is another TSB for same concern applicable to the VIN. This TSB is only intended for diagnostic purposes and does not serve as a guideline for determining warrantable conditions. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. driving style, environmental conditions, and service history of the vehicle. Additionally, as brake pads and discs wear, their dampening ability is reduced. Disc thickness variation (DTV) is a common condition that contributes to brake pulsation. DTV occurs when the two braking surfaces of the brake disc are no longer parallel to each other. This condition cannot be accurately measured with normal workshop tools.
Source components: SERVICE BRAKES, HYDRAULIC · STEERING: STEERING WHEEL/HANDLE BAR.
Source record 10123716 at NHTSANHTSA communication ID: 10123775
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 96 number 13-67 dated July 10, 2013. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer?s door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 model years 2005?2006 and A3 model year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer?s HomeLink® opener system is using an alternate code. The handheld transmitter?s programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10123775 at NHTSANHTSA communication ID: 10123764
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10123764 at NHTSANHTSA communication ID: 10128399
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10128399 at NHTSANHTSA communication ID: 10058584
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
Source components: ENGINE.
Source record 10058584 at NHTSANHTSA communication ID: 10120832
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 14-50 dated July 10, 2014. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
Source components: ELECTRICAL SYSTEM.
Source record 10120832 at NHTSANHTSA communication ID: 10120821
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 15-63 dated May 18, 2015. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10120821 at NHTSANHTSA communication ID: 10120052
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 97 number 10-15 dated October 20, 2010. Sporadic fault memory entries are stored in various control modules. Contacts may be widened (over 0.63 mm) if incorrect pins or incorrect methods for current flow tests are used. Either action may cause intermittent electrical connections, which can cause sporadic DTCs to be stored in various control modules.
Source components: ELECTRICAL SYSTEM.
Source record 10120052 at NHTSANHTSA communication ID: 10120041
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 14-54 dated August 28, 2014. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10120041 at NHTSANHTSA communication ID: 10120003
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 94 number 12-92 dated October 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens.
Source components: EXTERIOR LIGHTING:HEADLIGHTS.
Source record 10120003 at NHTSANHTSA communication ID: 10119956
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 14-69 dated November 4, 2014. The following message appears on the MMI display: "Device or cable type not supported". The AMI cable being used is a genuine Audi-branded cable with an Audi part number (see Required Parts and Tools for a list of valid part numbers). The "Device or cable type not supported" message may be displayed when an incorrect AMI cable type is connected to the MMI system. Only cables with an Audi part number (i.e., 4F0.XXX.XXX) are supported by the MMI system. Volkswagen-branded cables look similar, but are not guaranteed to work with Audi MMI systems. The label on the end of an Audi-branded cable has an Audi logo and Audi part number. Audi-branded cables have unique firmware inside the hardware that can determine which MMI system and iOS device are connected to the cable. Volkswagen cables do not have this firmware. The firmware is required to allow the system to function normally due to the different technology available in the different MMI systems and in the different iPhones and iPod Touch devices. In addition, the AMI system was designed to play the music stored locally on the connected device only. Music streaming (from Spotify or Pandora, for example) is not supported, and music stored in the cloud (on Google Play, Amazon Prime, or iTunes Match/iCloud, for example) may drop out, pause, and skip when played.
Source components: ELECTRICAL SYSTEM.
Source record 10119956 at NHTSANHTSA communication ID: 10119945
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 10 number 13-10 dated September 5, 2013. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these metal debris pieces are not removed prior to the installation and operation of the replacement engine, they could be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Source components: ENGINE AND ENGINE COOLING.
Source record 10119945 at NHTSANHTSA communication ID: 10119943
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 12-45 dated March 16, 2012. The MIL is on. DTCs are stored in the engine control module (ECM). A false signal may be sent to the controller due to fuel intrusion into the low-pressure system fuel pressure sensor, G410. The result is a reading that is out of tolerance. Improvements to G410 fuel pressure sensor.
Source components: EQUIPMENT:ELECTRICAL · FUEL SYSTEM, GASOLINE.
Source record 10119943 at NHTSANHTSA communication ID: 10119942
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 08-05 dated December 22, 2008. The MIL is on. DTC P0299 (Turbo/Super Charger Underboost) is stored in the engine control module (ECM). The condition may be the result of an abnormal turbocharger recirculation valve.
Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER.
Source record 10119942 at NHTSANHTSA communication ID: 10058134
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: DUE TO FUEL INTRUSION IN LOW PRESSURE SYSTEM FUEL PRESSURE SENSOR, A FALSE SIGNAL IS BEING SENT TO CONTROLLER, RESULTING IN AN OUT OF TOLERANCE READING FOR G410. MODEL 2005-08 A4, 2007-08 A4 CABRIOLET, A3, 2007 TT. *PE
Source components: EQUIPMENT.
Source record 10058134 at NHTSANHTSA communication ID: 10119955
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 08-129 dated November 12, 2008. Customer states that the reception of satellite radio occasionally fades or drops out. The information display may show a message related to the satellite radio, such as "Linking", "Updating", "Acquiring Signal", "Loading", "No Signal", or "No Sat".
Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10119955 at NHTSANHTSA communication ID: 10119941
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 14-96 dated September 26, 2014. The MIL is on. A number of DTC entries with regard to the throttle valve are stored in the engine control module (ECM). In most cases, the entries are sporadic. Contact resistance in the ECM wiring throttle valve.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:WIRING.
Source record 10119941 at NHTSANHTSA communication ID: 10119940
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 13-09 dated June 21, 2013. The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in excessive accumulation of deposits on intake valves, intake manifold, fuel injectors, and combustion chambers, engine running rough after cold start, excessive engine cranking time, hesitations while driving, rough engine idle, Reduced engine performance, and/or Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire, lean fuel system, or air/fuel ratio imbalance in the engine control module. Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10119940 at NHTSANHTSA communication ID: 10119946
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 13-35 dated January 9, 2013. This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).
Source components: ENGINE AND ENGINE COOLING.
Source record 10119946 at NHTSANHTSA communication ID: 10120682
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 13-69 dated February 14, 2013. Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiring. This bulletin applies only to non-diesel engines.
Source components: ENGINE AND ENGINE COOLING.
Source record 10120682 at NHTSANHTSA communication ID: 10124893
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 13-74 dated February 5, 2013. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
Source components: EQUIPMENT.
Source record 10124893 at NHTSANHTSA communication ID: 10228302
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10228302 at NHTSANHTSA communication ID: 10224981
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10224981 at NHTSANHTSA communication ID: 10221954
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10221954 at NHTSANHTSA communication ID: 10124882
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Audi of America has started to host its TSB videos outside of ElsaPro. Doing so provides higher-quality videos, more reliable access to the videos, and the ability to view the videos on different devices.
Source components: ELECTRICAL SYSTEM.
Source record 10124882 at NHTSANHTSA communication ID: 10124892
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 12-63 dated October 4, 2012. The customer may report flickering of the dash insert lighting, of the A/C control panel lighting, or of the inside light. The condition occurs when the accelerator is pressed while the vehicle is in P or N, or when the vehicle is shifted down when moving downhill. Only vehicles with PR number 8GH may be affected. When high electricity consumers are switched off when the battery is fully charged, the energy generated by the alternator is sometimes too great for the power system to absorb. This may lead to briefly-increased voltage, causing the lights to flicker.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10124892 at NHTSANHTSA communication ID: 10124898
NHTSA source summary · Original PDF not reviewed by Recallfolio
This is an advance notice for Audi of America employees. This notice contains information for the accessories operations technical bulletin.
Source components: EQUIPMENT.
Source record 10124898 at NHTSANHTSA communication ID: 10231140
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231140 at NHTSANHTSA communication ID: 10250950
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tightening wheel bolts
Source components: WHEELS.
Source record 10250950 at NHTSANHTSA communication ID: 10250949
NHTSA source summary · Original PDF not reviewed by Recallfolio
Steering wheel leather damage, all vehicles
Source components: STEERING.
Source record 10250949 at NHTSANHTSA communication ID: 10124754
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 48 number 13-54 dated September 13, 2013. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
Source components: STEERING.
Source record 10124754 at NHTSANHTSA communication ID: 10124751
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013. Wheel bolt requires torque adjustment.
Source components: WHEELS.
Source record 10124751 at NHTSANHTSA communication ID: 10243756
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243756 at NHTSANHTSA communication ID: 10228407
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Service Bukketein.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10228407 at NHTSANHTSA communication ID: 10225086
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Service Bukketein.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10225086 at NHTSANHTSA communication ID: 10222059
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Service Bukketein.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10222059 at NHTSANHTSA communication ID: 10124818
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 13-76 dated March 14, 2013. MIL on. A number of incident memory entries with regard to the throttle valve are stored in the engine control module (ECM), J623 (01). In most cases, the entries are sporadic. Contact resistance in the ECM wiring ? throttle valve.
Source components: ELECTRICAL SYSTEM.
Source record 10124818 at NHTSANHTSA communication ID: 10124806
NHTSA source summary · Original PDF not reviewed by Recallfolio
Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
Source components: VISIBILITY:WINDSHIELD.
Source record 10124806 at NHTSANHTSA communication ID: 10243761
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi Elsa Newsletter
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243761 at NHTSANHTSA communication ID: 10122524
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10122524 at NHTSANHTSA communication ID: 10231144
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231144 at NHTSANHTSA communication ID: 10231126
NHTSA source summary · Original PDF not reviewed by Recallfolio
i-wire new wiring diagram application
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10231126 at NHTSANHTSA communication ID: 10228297
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10228297 at NHTSANHTSA communication ID: 10224976
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
Source components: BACK OVER PREVENTION:SOFTWARE.
Source record 10224976 at NHTSANHTSA communication ID: 10221949
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10221949 at NHTSANHTSA communication ID: 10122522
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 00 number 12-32 dated February 7, 2012. This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10122522 at NHTSANHTSA communication ID: 10250966
NHTSA source summary · Original PDF not reviewed by Recallfolio
Brake pulsation diagnostic guidelines
Source components: SERVICE BRAKES.
Source record 10250966 at NHTSANHTSA communication ID: 10128242
NHTSA source summary · Original PDF not reviewed by Recallfolio
Brake-related vibration and pulsation has several causes that depend on driving style and resulting brake disc temperature, as well as environmental conditions. Both the intensity of the wear of the brake system and the type of wear depend on the operating conditions of the vehicle. The wear of the brake discs is determined by the frequency and intensity of the brake operations. Dirt build-up, exposure to sand, long standing times, and road salt or similar, can also promote wear as well as cause scoring marks on the brake discs. The driving style of the driver also influences the wear of the brake system. An overly-aggressive driving style, which results in frequent sharp braking, can lead to more wear (particularly of the brake pads). A gentle driving style can result in very light brake applications. If the brakes are always applied with little pressure, a rust film and other airborne particles may settle on the brake discs and pads. Firm brake operations can help clean off such build-up from the brakes.
Source components: AIR BAGS · SERVICE BRAKES, HYDRAULIC · SUSPENSION.
Source record 10128242 at NHTSANHTSA communication ID: 10249054
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the State of Minnesota.
Source components: UNKNOWN OR OTHER.
Source record 10249054 at NHTSANHTSA communication ID: 10122563
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 13-02 dated August 30, 2013. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10122563 at NHTSANHTSA communication ID: 10250959
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shock absorber leaks: assessment aid
Source components: SUSPENSION:FRONT:SHOCK ABSORBER · SUSPENSION:REAR:SHOCK ABSORBER.
Source record 10250959 at NHTSANHTSA communication ID: 10250665
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shock absorber leaks: assessment aid
Source components: EQUIPMENT · STRUCTURE.
Source record 10250665 at NHTSANHTSA communication ID: 10122540
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 40 number 13-34 dated September 23, 2013. Oil appears on one or several shock absorbers.
Source components: SUSPENSION:FRONT:SHOCK ABSORBER · SUSPENSION:REAR:SHOCK ABSORBER.
Source record 10122540 at NHTSANHTSA communication ID: 10231130
NHTSA source summary · Original PDF not reviewed by Recallfolio
Idenifying and mixing factory fill engine coolants
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM.
Source record 10231130 at NHTSANHTSA communication ID: 10122415
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 13-41 dated June 20, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10122415 at NHTSANHTSA communication ID: 10231128
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231128 at NHTSANHTSA communication ID: 10231127
NHTSA source summary · Original PDF not reviewed by Recallfolio
ElsaPro Software update and technical bulletins
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231127 at NHTSANHTSA communication ID: 10226530
NHTSA source summary · Original PDF not reviewed by Recallfolio
ATF pan leaks
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10226530 at NHTSANHTSA communication ID: 10210680
NHTSA source summary · Original PDF not reviewed by Recallfolio
As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak. Automatic transmission fluid is leaking at the sump pan gasket.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:SEALS/GASKETS.
Source record 10210680 at NHTSANHTSA communication ID: 10122418
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 37 number 11-19 dated January 31, 2011. Automatic transmission fluid is leaking at the sump pan gasket. As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION · POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES.
Source record 10122418 at NHTSANHTSA communication ID: 10212703
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Source components: POWER TRAIN.
Source record 10212703 at NHTSANHTSA communication ID: 10226529
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Source components: POWER TRAIN.
Source record 10226529 at NHTSANHTSA communication ID: 10210679
NHTSA source summary · Original PDF not reviewed by Recallfolio
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
Source components: ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE · POWER TRAIN.
Source record 10210679 at NHTSANHTSA communication ID: 10122465
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.
Source components: POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE).
Source record 10122465 at NHTSANHTSA communication ID: 10249085
NHTSA source summary · Original PDF not reviewed by Recallfolio
Google Maps Street View (NVLW))
Source components: UNKNOWN OR OTHER.
Source record 10249085 at NHTSANHTSA communication ID: 10216613
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vacuum line cracks.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10216613 at NHTSANHTSA communication ID: 10122331
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 24 number 10-22 dated June 2, 2010. The MIL is on. DTCs are stored in the ECM. There may be slight power reduction at high RPMs. This condition does not cause stalling. Vacuum line cracks.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10122331 at NHTSANHTSA communication ID: 10065428
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM.
Source record 10065428 at NHTSANHTSA communication ID: 10122359
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 13-92 dated July 16, 2013. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone receives the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call because it assumes that the phone is not responding.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.
Source record 10122359 at NHTSANHTSA communication ID: 10122357
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 14-19 dated January 3, 2014. Customer complains that during Bluetooth calls, the person at the other end has trouble hearing the speaker in the vehicle. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10122357 at NHTSANHTSA communication ID: 10216651
NHTSA source summary · Original PDF not reviewed by Recallfolio
The customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. ? When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. ? There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Source components: BACK OVER PREVENTION:DISPLAY FUNCTION.
Source record 10216651 at NHTSANHTSA communication ID: 10122332
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 12-26 dated January 20, 2012. When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. The displayed vehicle range drops inconsistently. After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
Source record 10122332 at NHTSANHTSA communication ID: 10231135
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231135 at NHTSANHTSA communication ID: 10122302
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 12-50 dated August 1, 2012. Echo effects, caller on either end cannot hear conversation, sound distortion or feedback, and the sound is distorted, hisses, or scrapes occur during a phone call. This bulletin provides guidelines for analyzing the call quality of the Bluetooth system in the vehicle, and is not applicable to any Audi warranty.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10122302 at NHTSANHTSA communication ID: 10231133
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231133 at NHTSANHTSA communication ID: 10125561
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 12-27 dated April 24, 2012. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10125561 at NHTSANHTSA communication ID: 10231122
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231122 at NHTSANHTSA communication ID: 10228387
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.
Source components: ELECTRICAL SYSTEM.
Source record 10228387 at NHTSANHTSA communication ID: 10225066
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10225066 at NHTSANHTSA communication ID: 10222039
NHTSA source summary · Original PDF not reviewed by Recallfolio
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10222039 at NHTSANHTSA communication ID: 10122192
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 46 number 12-23 dated June 18, 2012. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. Document contains the brake pulsation diagnostic guidelines.
Source components: SERVICE BRAKES, HYDRAULIC · STEERING · WHEELS.
Source record 10122192 at NHTSANHTSA communication ID: 10122178
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 24 number 11-06 dated December 7, 2011. The MIL is on. DTCs are stored in the ECM. Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance. Comparing Measured Value Block 103 with 106 is not an accurate method for diagnosing G410. In order to diagnose G410 accurately, use a mechanical gauge and compare results with the low-side fuel pressure Actual Value in Measured Value Block 103.
Source components: ENGINE.
Source record 10122178 at NHTSANHTSA communication ID: 10122199
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 11-16 dated October 5, 2011. During a Bluetooth call, the sound is difficult to hear for the other party. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.
Source components: ELECTRICAL SYSTEM.
Source record 10122199 at NHTSANHTSA communication ID: 10121414
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 69 number 08-11 dated December 10, 2008. The airbag warning lamp is illuminated in the instrument cluster. DTCs are stored in the airbag control module. This condition may be caused by sporadic high resistance in the connector between the airbag and seat harness, even though the side airbag system is functioning normally.
Source components: AIR BAGS · AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE.
Source record 10121414 at NHTSANHTSA communication ID: 10068132
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: AIR BAGS.
Source record 10068132 at NHTSANHTSA communication ID: 10054866
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: THE CONNECTOR BETWEEN AIRBAG AND SEAT HARNESS HAS A SPORADIC HIGH RESISTANCE DUE TO AIRBAG WARNING LAMP BEING ILLUMINATED IN INSTRUMENT CLUSTER, EVEN THOUGH SIDE AIRBAG SYSTEM IS FUNCTIONING NORMALLY. *PE
Source components: AIR BAGS.
Source record 10054866 at NHTSANHTSA communication ID: 10251027
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tightening wheel bolts
Source components: WHEELS.
Source record 10251027 at NHTSA