The manufacturer’s record · Page 3 of 4

2006 Audi A3
Manufacturer communications & TSBs.Page 3

Original record summaries, dates and identifiers for this model-year. Records 201–300 of 349, ordered newest first. Dated records on this page: Sep 10, 2010–Jan 20, 2014.

Back to 2006 Audi A3 problems & recalls
Read the applicability before drawing a conclusion.

This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.

NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.

Jan 20, 2014Service Bulletin/Repair Instructions

Edition69

NHTSA communication ID: 10231122

NHTSA source summary · Original PDF not reviewed by Recallfolio

Technical bulletins and updates

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10231122 at NHTSA
Jan 9, 2014Service Bulletin/Repair Instructions

01145720151069

NHTSA communication ID: 10228387

NHTSA source summary · Original PDF not reviewed by Recallfolio

Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.

Source components: ELECTRICAL SYSTEM.

Source record 10228387 at NHTSA
Jan 9, 2014Service Bulletin/Repair Instructions

01145720151069

NHTSA communication ID: 10225066

NHTSA source summary · Original PDF not reviewed by Recallfolio

Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.

Source components: FUEL SYSTEM, GASOLINE.

Source record 10225066 at NHTSA
Jan 9, 2014Service Bulletin/Repair Instructions

01145720151069

NHTSA communication ID: 10222039

NHTSA source summary · Original PDF not reviewed by Recallfolio

Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.

Source components: FUEL SYSTEM, GASOLINE.

Source record 10222039 at NHTSA
Jan 9, 2014Service Bulletin/Repair Instructions

A461466 2022584-

NHTSA communication ID: 10122192

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 46 number 12-23 dated June 18, 2012. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. Document contains the brake pulsation diagnostic guidelines.

Source components: SERVICE BRAKES, HYDRAULIC · STEERING · WHEELS.

Source record 10122192 at NHTSA
Jan 9, 2014Service Bulletin/Repair Instructions

A011457 2015106-

NHTSA communication ID: 10122178

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 24 number 11-06 dated December 7, 2011. The MIL is on. DTCs are stored in the ECM. Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance. Comparing Measured Value Block 103 with 106 is not an accurate method for diagnosing G410. In order to diagnose G410 accurately, use a mechanical gauge and compare results with the low-side fuel pressure Actual Value in Measured Value Block 103.

Source components: ENGINE.

Source record 10122178 at NHTSA
Jan 3, 2014Service Bulletin/Repair Instructions

A911419 2026895-

NHTSA communication ID: 10122199

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 91 number 11-16 dated October 5, 2011. During a Bluetooth call, the sound is difficult to hear for the other party. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.

Source components: ELECTRICAL SYSTEM.

Source record 10122199 at NHTSA
Dec 10, 2013Service Bulletin/Repair Instructions

A691327 2010144-

NHTSA communication ID: 10121414

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 69 number 08-11 dated December 10, 2008. The airbag warning lamp is illuminated in the instrument cluster. DTCs are stored in the airbag control module. This condition may be caused by sporadic high resistance in the connector between the airbag and seat harness, even though the side airbag system is functioning normally.

Source components: AIR BAGS · AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE.

Source record 10121414 at NHTSA
Dec 10, 2013Service Bulletin/Repair Instructions

2010144/4

NHTSA communication ID: 10068132

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: AIR BAGS.

Source record 10068132 at NHTSA
Dec 10, 2013Service Bulletin/Repair Instructions

TSB-69-13-27

NHTSA communication ID: 10054866

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: THE CONNECTOR BETWEEN AIRBAG AND SEAT HARNESS HAS A SPORADIC HIGH RESISTANCE DUE TO AIRBAG WARNING LAMP BEING ILLUMINATED IN INSTRUMENT CLUSTER, EVEN THOUGH SIDE AIRBAG SYSTEM IS FUNCTIONING NORMALLY. *PE

Source components: AIR BAGS.

Source record 10054866 at NHTSA
Dec 9, 2013Service Bulletin/Repair Instructions

44134620103345

NHTSA communication ID: 10251027

NHTSA source summary · Original PDF not reviewed by Recallfolio

Tightening wheel bolts

Source components: WHEELS.

Source record 10251027 at NHTSA
Dec 9, 2013Service Bulletin/Repair Instructions

A441346 2010334-

NHTSA communication ID: 10121408

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should not be used to apply torque to wheel bolts. Always use a calibrated torque wrench to attain the correct wheel bolt torque and follow the proper wheel tightening procedure as outlined in Elsa. Proper use of a calibrated torque wrench ensures that all wheel bolts are tightened equally and reduces the chances of repeat repairs. Using methods other than a calibrated torque wrench to attain correct wheel bolt torque may lead to problems.

Source components: WHEELS · WHEELS:LUGS/NUTS/BOLTS/STUDS.

Source record 10121408 at NHTSA
Dec 9, 2013Service Bulletin/Repair Instructions

TSB-44-13-46

NHTSA communication ID: 10054859

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10054859 at NHTSA
Oct 21, 2013Service Bulletin/Repair Instructions

Edition58

NHTSA communication ID: 10243775

NHTSA source summary · Original PDF not reviewed by Recallfolio

Audi Elsa Newsletter

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10243775 at NHTSA
Oct 7, 2013Service Bulletin/Repair Instructions

27 13 19 2029010

NHTSA communication ID: 10212668

NHTSA source summary · Original PDF not reviewed by Recallfolio

Low battery charge: excess current draw location

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.

Source record 10212668 at NHTSA
Oct 7, 2013Service Bulletin/Repair Instructions

A271319 2029010-

NHTSA communication ID: 10121306

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 27 number 12-13 dated March 22, 2012. The customer may report a discharged battery when trying to start the vehicle. The condition results in a no start.

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.

Source record 10121306 at NHTSA
Oct 2, 2013Service Bulletin/Repair Instructions

741312 2004327-4

NHTSA communication ID: 10121945

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 70 number 08-39 dated December 4, 2008. Leather upholstery is dirty or stained.

Source components: EQUIPMENT · STRUCTURE.

Source record 10121945 at NHTSA
Sep 25, 2013Service Bulletin/Repair Instructions

A571394 2035367-

NHTSA communication ID: 10121345

NHTSA source summary · Original PDF not reviewed by Recallfolio

Various features in the rear passenger compartment are inoperative. Some features may include power rear windows, rear climate control operating unit, rear sunroof panel, rear reading lamps, rear cigarette lighters, etc. By design, many electronically-controlled features in the rear passenger compartment, in addition to the power rear windows, are deactivated if the child lock in the driver's door is activated.

Source components: EQUIPMENT.

Source record 10121345 at NHTSA
Sep 23, 2013Service Bulletin/Repair Instructions

40133420181945

NHTSA communication ID: 10250999

NHTSA source summary · Original PDF not reviewed by Recallfolio

Shock absorber leaks: assessment aid

Source components: SUSPENSION:FRONT:SHOCK ABSORBER · SUSPENSION:REAR:SHOCK ABSORBER.

Source record 10250999 at NHTSA
Sep 23, 2013Service Bulletin/Repair Instructions

4013342018194

NHTSA communication ID: 10250658

NHTSA source summary · Original PDF not reviewed by Recallfolio

Shock absorber leaks: assessment aid

Source components: BACK OVER PREVENTION · STRUCTURE.

Source record 10250658 at NHTSA
Sep 23, 2013Service Bulletin/Repair Instructions

A901341 2010353-

NHTSA communication ID: 10121365

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.

Source components: EQUIPMENT ADAPTIVE/MOBILITY.

Source record 10121365 at NHTSA
Sep 23, 2013Service Bulletin/Repair Instructions

A401334 2018194-

NHTSA communication ID: 10121331

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 40 number 10-04 dated April 1, 2010. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber. As a result of a leak because the shock absorber is damaged. As a result of residue from when the shock was filled during production, or of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.

Source components: SUSPENSION.

Source record 10121331 at NHTSA
Sep 16, 2013Service Bulletin/Repair Instructions

Edition53

NHTSA communication ID: 10243780

NHTSA source summary · Original PDF not reviewed by Recallfolio

Audi Elsa Newsletter

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10243780 at NHTSA
Sep 13, 2013Service Bulletin/Repair Instructions

A481354 2028220-

NHTSA communication ID: 10121342

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 48 number 12-30 dated June 25, 2012. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.

Source components: STEERING · WHEELS.

Source record 10121342 at NHTSA
Sep 5, 2013Service Bulletin/Repair Instructions

131020182884

NHTSA communication ID: 10216638

NHTSA source summary · Original PDF not reviewed by Recallfolio

If the vehicle?s engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.

Source components: BACK OVER PREVENTION.

Source record 10216638 at NHTSA
Sep 5, 2013Service Bulletin/Repair Instructions

A101310 2018288-

NHTSA communication ID: 10121324

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.

Source components: ENGINE AND ENGINE COOLING.

Source record 10121324 at NHTSA
Aug 30, 2013Service Bulletin/Repair Instructions

A911302 2018187-

NHTSA communication ID: 10124638

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.

Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10124638 at NHTSA
Aug 16, 2013Service Bulletin/Repair Instructions

A011323 2013147-

NHTSA communication ID: 10124682

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 01 number 13-18 dated August 1, 2013. MIL on. DTC P2293 (Fuel pressure regulator 2 performance) is stored in the engine control module (ECM). DTC P2293 (Fuel pressure regulator 2 performance) is stored in the engine control module (ECM). DTCs may be stored in combination with DTC P2293. Excessive wear of the cam lobe (in the intake camshaft) that drives the high pressure fuel pump limits the maximum pump piston lift, causing fuel rail pressure fluctuations. The wear on the cam lobe also leads to wear in the base of the high pressure fuel pump cam follower.

Source components: FUEL SYSTEM, GASOLINE.

Source record 10124682 at NHTSA
Aug 14, 2013Service Bulletin/Repair Instructions

A641329 2020552-

NHTSA communication ID: 10124645

NHTSA source summary · Original PDF not reviewed by Recallfolio

Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.

Source components: VISIBILITY:WINDSHIELD.

Source record 10124645 at NHTSA
Aug 7, 2013Service Bulletin/Repair Instructions

A461353 2034181-

NHTSA communication ID: 10124660

NHTSA source summary · Original PDF not reviewed by Recallfolio

Customer may report hearing brake noise from front or rear brakes. Customers may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.

Source components: SERVICE BRAKES.

Source record 10124660 at NHTSA
Aug 1, 2013Service Bulletin/Repair Instructions

A011318 2013147-

NHTSA communication ID: 10124680

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 15 number 11-22 dated May 31, 2011. MIL on. DTC P2293 (Fuel pressure regulator 2 performance) is stored in the engine control module (ECM). DTCs may be stored in combination with DTC P2293. Excessive wear of the cam lobe (in the intake camshaft) that drives the high pressure fuel pump limits the maximum pump piston lift, causing fuel rail pressure fluctuations. The wear on the cam lobe also leads to wear in the base of the high pressure fuel pump cam follower.

Source components: FUEL SYSTEM, GASOLINE:DELIVERY.

Source record 10124680 at NHTSA
Jul 29, 2013Service Bulletin/Repair Instructions

Edition46

NHTSA communication ID: 10243791

NHTSA source summary · Original PDF not reviewed by Recallfolio

Audi Elsa Newsletter

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10243791 at NHTSA
Jul 22, 2013Service Bulletin/Repair Instructions

Edition45

NHTSA communication ID: 10243790

NHTSA source summary · Original PDF not reviewed by Recallfolio

Audi Elsa Newsletter

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10243790 at NHTSA
Jul 19, 2013Service Bulletin/Repair Instructions

37130920287152

NHTSA communication ID: 10226502

NHTSA source summary · Original PDF not reviewed by Recallfolio

Rough gear changes both when accelerating and slowing down

Source components: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL.

Source record 10226502 at NHTSA
Jul 19, 2013Service Bulletin/Repair Instructions

37 13 09 2028715

NHTSA communication ID: 10210652

NHTSA source summary · Original PDF not reviewed by Recallfolio

After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS.

Source record 10210652 at NHTSA
Jul 19, 2013Service Bulletin/Repair Instructions

A911393 2034784-

NHTSA communication ID: 10124584

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some telephone numbers that were downloaded via Bluetooth® are stored with additional, unrelated numbers that do not appear in the contact on the customer"s cellular phone. These telephone numbers are displayed incorrectly on the radio display. The software incorrectly stores the downloaded phone numbers.

Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.

Source record 10124584 at NHTSA
Jul 19, 2013Service Bulletin/Repair Instructions

A371309 2028715-

NHTSA communication ID: 10124499

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 37 number 12-40 dated February 28, 2012. Rough gear changes, both when accelerating and when slowing down. There is a rough driving power disruption that occurs sporadically and lasts for less than a second. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.

Source components: POWER TRAIN.

Source record 10124499 at NHTSA
Jul 19, 2013Service Bulletin/Repair Instructions

TSB-37-13-09

NHTSA communication ID: 10053883

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: IN SOME VEHICLES, THE CLUTCHES, AFTER HAVING TORQUE CONVERTER, COMPLETE GEARBOX REPLACEMENT OR MECHATRONICS, MUST ADAPT TO NEW COMPONENTS WITH GRADUAL MOVING OF CLUTCH LININGS IN MOST DIVERSE LOAD CONDITIONS. MODELS 2004-14, A3, TT, Q7, A4, A5, A6, A7, A8, Q5, S4, S5, S6, S7, RS5. *PE

Source components: STEERING:GEAR BOX (OTHER THAN RACK AND PINION).

Source record 10053883 at NHTSA
Jul 16, 2013Service Bulletin/Repair Instructions

A911392 2030947-

NHTSA communication ID: 10124525

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 91 number 12-61 dated September 25, 2012. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone gets the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call assuming the phone is not responding.

Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.

Source record 10124525 at NHTSA
Jul 10, 2013Service Bulletin/Repair Instructions

A911390 2019821-

NHTSA communication ID: 10128035

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 91 number 11-29 dated December 20, 2011. The Bluetooth telephone bonding tone is too loud or quiet for the customer. When a telephone is connected to the vehicle via the Bluetooth wireless connection, a tone is played over the audio system. The volume of this tone correlates to the volume level of the phone preparation voice control. This volume level is independent of the volume during telephone calls.

Source components: ELECTRICAL SYSTEM.

Source record 10128035 at NHTSA
Jul 10, 2013Service Bulletin/Repair Instructions

A961367 2019260-

NHTSA communication ID: 10124574

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 96 number 12-37 dated June 11, 2012. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer's door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 Model Years 2005 - 2006 and A3 Model Year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer's HomeLink® opener system is using an alternate code. The handheld transmitter's programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.

Source components: EQUIPMENT:ELECTRICAL.

Source record 10124574 at NHTSA
Jul 8, 2013Service Bulletin/Repair Instructions

A461347 2034387-

NHTSA communication ID: 10124505

NHTSA source summary · Original PDF not reviewed by Recallfolio

Customer may report sporadically hearing the parking brake being actuated after the vehicle has been switched off. If the customer does not identify the sound as the sound of the parking brake being actuated, he or she may simply complain of hearing noises from the rear brakes. Ignition is switched off. Steering is locked. Park is selected. Parking brake is not engaged. If the electro-mechanical parking brake is not operated for some time, the free play between brake pads and brake discs increases because of normal brake pad wear. The parking brake control unit performs an automatic correction about every 621 miles (1,000 km). On A8 models, the brake pad thickness is also calculated.

Source components: ELECTRICAL SYSTEM · PARKING BRAKE.

Source record 10124505 at NHTSA
Jul 1, 2013Service Bulletin/Repair Instructions

Edition42

NHTSA communication ID: 10243787

NHTSA source summary · Original PDF not reviewed by Recallfolio

Audi Elsa Newsletter

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10243787 at NHTSA
Jun 24, 2013Service Bulletin/Repair Instructions

Edition41

NHTSA communication ID: 10243987

NHTSA source summary · Original PDF not reviewed by Recallfolio

Elsaweb Newsletter

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10243987 at NHTSA
Jun 21, 2013Service Bulletin/Repair Instructions

01130920147538

NHTSA communication ID: 10228314

NHTSA source summary · Original PDF not reviewed by Recallfolio

The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.

Source components: FUEL SYSTEM, GASOLINE.

Source record 10228314 at NHTSA
Jun 21, 2013Service Bulletin/Repair Instructions

01130920147538

NHTSA communication ID: 10224993

NHTSA source summary · Original PDF not reviewed by Recallfolio

The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.

Source components: FUEL SYSTEM, GASOLINE.

Source record 10224993 at NHTSA
Jun 21, 2013Service Bulletin/Repair Instructions

01130920147538

NHTSA communication ID: 10221966

NHTSA source summary · Original PDF not reviewed by Recallfolio

The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.

Source components: FUEL SYSTEM, GASOLINE.

Source record 10221966 at NHTSA
Jun 21, 2013Service Bulletin/Repair Instructions

A011309 2014753-

NHTSA communication ID: 10123591

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine performance. Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire (example: P0300, P030x) and / or lean fuel system (example: P0171, P0174, P1128, P1130, P1136, P1138) in the engine control module (ECM). Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.

Source components: ELECTRICAL SYSTEM · FUEL SYSTEM, GASOLINE.

Source record 10123591 at NHTSA
Jun 20, 2013Service Bulletin/Repair Instructions

A191341 2025303-

NHTSA communication ID: 10123587

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.

Source components: ENGINE AND ENGINE COOLING.

Source record 10123587 at NHTSA
Jun 10, 2013Service Bulletin/Repair Instructions

42131820217713

NHTSA communication ID: 10251006

NHTSA source summary · Original PDF not reviewed by Recallfolio

Light cracking or rubbing noises from suspension strut when steering

Source components: SUSPENSION.

Source record 10251006 at NHTSA
Jun 10, 2013Service Bulletin/Repair Instructions

4213182021771

NHTSA communication ID: 10250670

NHTSA source summary · Original PDF not reviewed by Recallfolio

Light cracking or rubbing noises from suspension strut when steering

Source components: ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC) · SUSPENSION.

Source record 10250670 at NHTSA
Jun 10, 2013Service Bulletin/Repair Instructions

A421318 2021771-

NHTSA communication ID: 10123578

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 40 number 10-10 dated September 10, 2010. Light cracking or rubbing noises when steering. The noise emanates from the front suspension strut mounting. The complaint occurs most often when the vehicle is maneuvered at slow speeds (e.g., parking) or when the steering wheel is turned while the vehicle is not moving. The noise is not caused by extreme load on only one suspension strut (e.g., slowly driving uphill while turning the steering wheel).

Source components: SUSPENSION.

Source record 10123578 at NHTSA
May 29, 2013Service Bulletin/Repair Instructions

37 13 07 2033658

NHTSA communication ID: 10210650

NHTSA source summary · Original PDF not reviewed by Recallfolio

This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who consciously or unconsciously drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. As a result, application of the brake and accelerator pedals at the same time (brake pedal with left foot and accelerator pedal with right foot) results in the following: ? Brake pedal function (normal at all times) overrides any throttle application. ? Diagnostic Trouble Codes (DTCs) will not be stored. ? When the brake pedal is applied while the accelerator is depressed, engine RPMs will return to idle speeds of 1400 RPMs after approximately two seconds. ? When the accelerator is applied while the brake pedal is depressed, the vehicle accelerates slower than usual (reduced engine torque).

Source components: SERVICE BRAKES.

Source record 10210650 at NHTSA
May 29, 2013Service Bulletin/Repair Instructions

37-13-07

NHTSA communication ID: 10052307

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: SOME VEHICLES MAY LACK POWER OR WILL NOT MOVE AFTER STOP DUE TO SIMULTANEOUSLY DEPRESSING THE BRAKE AND ACCELERATOR PEDALS. *JS

Source components: VEHICLE SPEED CONTROL.

Source record 10052307 at NHTSA
May 28, 2013Service Bulletin/Repair Instructions

133920247843

NHTSA communication ID: 10216660

NHTSA source summary · Original PDF not reviewed by Recallfolio

Deposits or coolant residues obstruct the electric transition on the sensor in the reservoir. This affects the coolant level display

Source components: BACK OVER PREVENTION · ENGINE AND ENGINE COOLING.

Source record 10216660 at NHTSA
Apr 2, 2013Service Bulletin/Repair Instructions

461335201713011

NHTSA communication ID: 10251038

NHTSA source summary · Original PDF not reviewed by Recallfolio

Brakes squeel

Source components: SERVICE BRAKES.

Source record 10251038 at NHTSA
Apr 2, 2013Service Bulletin/Repair Instructions

A461335 2017130-

NHTSA communication ID: 10123922

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 46 number 11-16 dated December 9, 2011. Customer complains of brake squeal.

Source components: SERVICE BRAKES.

Source record 10123922 at NHTSA
Apr 1, 2013Service Bulletin/Repair Instructions

A001348 2002047-

NHTSA communication ID: 10123901

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011. This TSB contains information on technician preparation when calling the Audi Technical Assistance Center

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10123901 at NHTSA
Mar 27, 2013Service Bulletin/Repair Instructions

A171338 2012913-

NHTSA communication ID: 10123884

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 17 number 10-07 dated June 3, 2010. Oil filter cartridge requires replacement.

Source components: ENGINE.

Source record 10123884 at NHTSA
Mar 25, 2013Service Bulletin/Repair Instructions

Edition29

NHTSA communication ID: 10243991

NHTSA source summary · Original PDF not reviewed by Recallfolio

Elsaweb Newsletter

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10243991 at NHTSA
Mar 25, 2013Service Bulletin/Repair Instructions

A191335 2025303-

NHTSA communication ID: 10123882

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.

Source components: ENGINE AND ENGINE COOLING.

Source record 10123882 at NHTSA
Mar 14, 2013Service Bulletin/Repair Instructions

01137620182607

NHTSA communication ID: 10228353

NHTSA source summary · Original PDF not reviewed by Recallfolio

Contact resistance in the ECM wiring ? throttle valve.

Source components: ELECTRICAL SYSTEM.

Source record 10228353 at NHTSA
Mar 14, 2013Service Bulletin/Repair Instructions

01137620182607

NHTSA communication ID: 10225032

NHTSA source summary · Original PDF not reviewed by Recallfolio

Contact resistance in the ECM wiring ? throttle valve.

Source components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM).

Source record 10225032 at NHTSA
Mar 14, 2013Service Bulletin/Repair Instructions

01137620182607

NHTSA communication ID: 10222005

NHTSA source summary · Original PDF not reviewed by Recallfolio

Contact resistance in the ECM wiring ? throttle valve.

Source components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM) · ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE.

Source record 10222005 at NHTSA
Mar 14, 2013Service Bulletin/Repair Instructions

A011376 2018260-

NHTSA communication ID: 10123893

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 01 number 13-70 dated February 22, 2013. MIL on. A number of incident memory entries with regard to the throttle valve are stored in the engine control module (ECM), J623 (01). In most cases, the entries are sporadic. Contact resistance in the ECM wiring ? throttle valve.

Source components: ELECTRICAL SYSTEM:WIRING.

Source record 10123893 at NHTSA
Mar 14, 2013Service Bulletin/Repair Instructions

TSB-01-13-70

NHTSA communication ID: 10051782

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: 01 MIL ON P1545, P0121, P0123, P0221, OR P0222 STORED IN ECM. A NUMBER OF INCIDENT MEMORY ENTRIES WITH REGARD TO THROTTLE VALVE ARE STORED IN THE ECM. IN MOST CASES, THE ENTRIES ARE SPORADIC. *JS UPDATED 04/15/2013 *JS

Source components: ENGINE.

Source record 10051782 at NHTSA
Mar 4, 2013Service Bulletin/Repair Instructions

Edition26

NHTSA communication ID: 10243988

NHTSA source summary · Original PDF not reviewed by Recallfolio

Elsaweb Newsletter

Source components: UNKNOWN OR OTHER.

Source record 10243988 at NHTSA
Mar 4, 2013Service Bulletin/Repair Instructions

A571385 2017082-

NHTSA communication ID: 10123863

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 57 number 13-82 dated February 5, 2013. Central locking via remote control does not work either sporadically or permanently. The locks can still be operated manually. Missing synchronization between the remote control key and vehicle because the battery has been disconnected or the battery of the remote control has been replaced. If other senders operate in the same frequency range (mobile phones, TV stations, wireless headphones, baby monitors, other vehicle remote controls, etc.), the remote control key may have been temporarily switched off because a clear identification of the remote control key is not possible. This is necessary to prevent an unintentional unlocking of the vehicle by other unrelated senders.

Source components: ELECTRICAL SYSTEM · LATCHES/LOCKS/LINKAGES:DOORS:LATCH.

Source record 10123863 at NHTSA
Feb 22, 2013Service Bulletin/Repair Instructions

0113702018260

NHTSA communication ID: 10250424

NHTSA source summary · Original PDF not reviewed by Recallfolio

MIL on (P1545, P0121, P0123, P0221 or P0222 stored in ECM)

Source components: ENGINE AND ENGINE COOLING.

Source record 10250424 at NHTSA
Feb 22, 2013Service Bulletin/Repair Instructions

ATE-13-05

NHTSA communication ID: 10124021

NHTSA source summary · Original PDF not reviewed by Recallfolio

VWGoA is pleased to inform you of the release and automatic delivery of new Required Special Tools used on Audi vehicles. Starting March 25, 2013, every Audi dealer will be shipped one AT-348 Special Tool Package, Freight F.O.B. Snap-On OEM and invoiced directly by the Audi Special Tools Program (Snap-On Business Solutions - SBS).

Source components: EQUIPMENT.

Source record 10124021 at NHTSA
Feb 22, 2013Service Bulletin/Repair Instructions

A011370 2018260-

NHTSA communication ID: 10123970

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 97 number 10-06 dated June 4, 2010. MIL on. A number of incident memory entries with regard to the throttle valve are stored in the ECM. In most cases, the entries are sporadic. Contact resistance in the ECM wiring - throttle valve.

Source components: ELECTRICAL SYSTEM:WIRING · ENGINE.

Source record 10123970 at NHTSA
Feb 5, 2013Service Bulletin/Repair Instructions

A911374 2024323-

NHTSA communication ID: 10124000

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 91 number 12-61 dated October 1, 2012. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.

Source components: BACK OVER PREVENTION: CAMERA SYSTEM.

Source record 10124000 at NHTSA
Feb 5, 2013Service Bulletin/Repair Instructions

A571382 2017082-

NHTSA communication ID: 10123995

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 57 number 11-55 dated August 22, 2011. Central locking via remote control does not work either sporadically or permanently. The locks can still be operated manually. Missing synchronization between the remote control key and vehicle because the battery has been disconnected or the battery of the remote control has been replaced. If other senders operate in the same frequency range (mobile phones, TV stations, wireless headphones, baby monitors, other vehicle remote controls, etc.), the remote control key may have been temporarily switched off because a clear identification of the remote control key is not possible. This is necessary to prevent an unintentional unlocking of the vehicle by other unrelated senders.

Source components: EQUIPMENT:ELECTRICAL · LATCHES/LOCKS/LINKAGES.

Source record 10123995 at NHTSA
Jan 9, 2013Service Bulletin/Repair Instructions

1335201004313

NHTSA communication ID: 10216682

NHTSA source summary · Original PDF not reviewed by Recallfolio

Engine oils that meet Audi Oil Quality Standards.

Source components: ENGINE AND ENGINE COOLING.

Source record 10216682 at NHTSA
Dec 19, 2012Service Bulletin/Repair Instructions

4012282031722

NHTSA communication ID: 10250469

NHTSA source summary · Original PDF not reviewed by Recallfolio

noises from front lower control arm mounting

Source components: SUSPENSION.

Source record 10250469 at NHTSA
Dec 19, 2012Service Bulletin/Repair Instructions

A401228 2031722-

NHTSA communication ID: 10122680

NHTSA source summary · Original PDF not reviewed by Recallfolio

Customer may report creaking and squeaking noises from front axle when driving at low temperatures on rough/bumpy/uneven roads. The customer complaint can be reproduced. The sound comes from the rubber and metal mounting of the front track control arms. The rubber lip of the rubber metal mounting rubs on the collar of the control arm. The resulting stickslip effect creates this sound, which does not affect the service life and function of the components. This is a normal condition. Track control arm bushings that are completely cracked through should be replaced.

Source components: EQUIPMENT · STRUCTURE · SUSPENSION.

Source record 10122680 at NHTSA
Dec 19, 2012Service Bulletin/Repair Instructions

SB-2031722/1

NHTSA communication ID: 10063888

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: SUSPENSION:FRONT:CONTROL ARM:LOWER ARM.

Source record 10063888 at NHTSA
Nov 13, 2012Service Bulletin/Repair Instructions

42121620217244

NHTSA communication ID: 10251004

NHTSA source summary · Original PDF not reviewed by Recallfolio

Loud cracking or rubbing noises when steering (cars without Audi magnetic ride suspension)

Source components: STEERING.

Source record 10251004 at NHTSA
Nov 13, 2012Service Bulletin/Repair Instructions

4212162021724

NHTSA communication ID: 10250668

NHTSA source summary · Original PDF not reviewed by Recallfolio

Loud cracking or rubbing noises when steering (cars without Audi magnetic ride suspension)

Source components: STEERING.

Source record 10250668 at NHTSA
Nov 13, 2012Service Bulletin/Repair Instructions

A421216 2021724-

NHTSA communication ID: 10122857

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 40 number 12-24 dated June 6, 2012. Loud cracking or rubbing noises when turning steering wheel. Steering is not affected and will operate normally. Prior to performing this TSB, check whether the vehicle is equipped with rubber shock absorber stop and the plastic cap on the shock. Vehicles equipped with the Audi magnetic ride suspension may not be equipped with these components and this TSB will not be applicable to such vehicles. While steering, the shock absorber stop can chafe on the plastic cap of the suspension strut. If the vehicle is lifted up, the noise disappears. The boot is not properly secured / installed, or is deformed.

Source components: EQUIPMENT · STEERING · SUSPENSION.

Source record 10122857 at NHTSA
Nov 13, 2012Service Bulletin/Repair Instructions

2021724/4

NHTSA communication ID: 10065366

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: STEERING.

Source record 10065366 at NHTSA
Oct 24, 2012Service Bulletin/Repair Instructions

A941292 2012749-

NHTSA communication ID: 10122766

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens. Damp air settles on the inside of a cold lens, which creates condensation. The headlight circulation system allows air from the outside to flow through the headlights. This open waterprotected ventilation system (needed for pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively cool areas, where the lens is cooled own by the air flow. Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end, with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.

Source components: EXTERIOR LIGHTING.

Source record 10122766 at NHTSA
Oct 12, 2012Service Bulletin/Repair Instructions

A171232 2018550-

NHTSA communication ID: 10122799

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 17 number 12 - 31 dated August 30, 2012. Oil consumption measurement - Repair Authorization (CA). In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil.

Source components: ENGINE.

Source record 10122799 at NHTSA
Oct 10, 2012Service Bulletin/Repair Instructions

Email - Counterf

NHTSA communication ID: 10122738

NHTSA source summary · Original PDF not reviewed by Recallfolio

On October 10, 2012, the National Highway Traffic Safety Administration released a press release regarding the potential for some vehicles to be at risk for containing counterfeit airbags if the airbags in the vehicle were replaced at independent repair shops that are not Audi dealerships or Audi certified. The Audi vehicles listed by NHTSA as at risk vehicles for the potential of containing counterfeit airbags if the airbags have been replaced are MY 2006-2009 A3, A4, A6, A8, Q5, and Q7 vehicles. If a Customer purchased their vehicle new, or if the vehicle is Certified pre-owned and a CARFAX report shows the airbag has never been replaced, there is no issue.

Source components: AIR BAGS.

Source record 10122738 at NHTSA
Oct 10, 2012Service Bulletin/Repair Instructions

DC-516

NHTSA communication ID: 10047899

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: ON CERTAIN VEHICLES, A POTENTIAL FOR COUNTERFEIT AIRBAGS WERE REPLACED, OR INSTALLED, AT INDEPENDENT REPAIR SHOPS AND HAVE NOT BEEN CERTIFIED BY DEALERSHIPS OR AUDI. MODELS 2006-2009 A3, A4, A6, A8, Q5, Q7. *PE

Source components: AIR BAGS: ALLEGED COUNTERFEIT AIR BAG.

Source record 10047899 at NHTSA
Oct 4, 2012Service Bulletin/Repair Instructions

A911263 2021151-

NHTSA communication ID: 10122771

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 91 number 11 ? 83 dated April 15, 2011. The customer may report that the illumination of the dash insert, the air conditioning control panel or the inside light flickers when briefly pressing the accelerator in P or N or when shifting down while driving downhill. Only vehicles with PR number 8GH may be affected. When high electricity consumers are switched off and the battery is fully charged, the energy generated by the alternator is sometimes too great for the power system to absorb. This may lead to briefly increased voltage, and the lights mentioned above may briefly flicker. This characteristic is caused by the alternator design and is a normal condition of the vehicle.

Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER.

Source record 10122771 at NHTSA
Oct 1, 2012Service Bulletin/Repair Instructions

A911262 2024323-

NHTSA communication ID: 10122772

NHTSA source summary · Original PDF not reviewed by Recallfolio

Supersedes Technical Service Bulletin Group 91 number 10 - 60 dated September 28, 2010. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.

Source components: BACK OVER PREVENTION.

Source record 10122772 at NHTSA
Aug 30, 2012Service Bulletin/Repair Instructions

1712322018550

NHTSA communication ID: 10250430

NHTSA source summary · Original PDF not reviewed by Recallfolio

Oil consumption measurement - Repair Authorization (CA)

Source components: ENGINE AND ENGINE COOLING.

Source record 10250430 at NHTSA
Mar 16, 2012Service Bulletin/Repair Instructions

2015505-10

NHTSA communication ID: 10043872

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: 01 MIL ON (P1297, P2187, P2279), OIL LEAKS, PRESSURE LOSS, SYSTEM TOO LEAN AT IDLE SPEED, AND INTAKE AIR SYSTEM LEAK. THERE MAY BE WHISTLE NOISE/AIR RUSHING NOISE FROM THE ENGINE. ALSO INCLUDED MODEL AUDI TTS MODEL YEARS 2010-2011. *JS

Source components: ENGINE AND ENGINE COOLING:ENGINE.

Source record 10043872 at NHTSA
Mar 9, 2012Service Bulletin/Repair Instructions

TSB-24-12-24

NHTSA communication ID: 10043928

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: IMRC (INTAKE MANIFOLD RC) MOTOR WARRANTY EXTENSION. *KB

Source components: ENGINE AND ENGINE COOLING:ENGINE.

Source record 10043928 at NHTSA
Mar 6, 2012Service Bulletin/Repair Instructions

AUSA-17D9

NHTSA communication ID: 10044087

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: ON SOME VEHICLES, THE FUEL PRESSURE SENSOR, IMRC MOTOR, OR PRESSURE VALVE MAY FAIL ON TFSI ENGINES, MANUFACTURED WITHIN SPECIFIC PERIOD. *PE

Source components: FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES.

Source record 10044087 at NHTSA
Jan 12, 2012Service Bulletin/Repair Instructions

TSB-01-12-39

NHTSA communication ID: 10043525

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: ENGINE HAS REDUCED ENGINE PERFORMANCE WITHOUT LOSS OF POWER OR STALLING; CIRCUIT GROUNDS; FUEL QUALITY POOR; MIL IS CONSTANTLY ILLUMINATED OR FLASHING; ROUGH IDLE; IGNITION COILS INCORRECTLY INSTALLED; ELECTRICAL CONNECTIONS LOOSE OR DAMAGED. *PE

Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:ENGINE.

Source record 10043525 at NHTSA
Dec 9, 2011Service Bulletin/Repair Instructions

TSB-01-11-38

NHTSA communication ID: 10043273

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: SOME MODEL YEAR VEHICLES MAY EXPERIENCE AN INTAKE MANIFOLD RUNNER CONTROL BANK 1 STUCK OPEN, ELECTRICAL MALFUNCTION OF INTAKE FLAP FOR AIRFLOW CONTROL AND/OR SENSOR VOLTAGE CIRCUIT A, LOW VOLTAGE. *PE

Source components: ENGINE AND ENGINE COOLING:ENGINE.

Source record 10043273 at NHTSA
Dec 1, 2011Service Bulletin/Repair Instructions

SB-BPGBPYBWT

NHTSA communication ID: 10043026

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION PERTAINING TO CERTAIN MODEL VEHICLES WITH 2.0L ENGINE CRANKCASE VENTILATION (PCV) VALVE AND INTAKE MANIFOLD RUNNER CONTROL MOTOR WARRANTY EXTENSION. *PE

Source components: ENGINE AND ENGINE COOLING:ENGINE · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV).

Source record 10043026 at NHTSA
Nov 9, 2011Service Bulletin/Repair Instructions

TSB-01-11-35

NHTSA communication ID: 10042995

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: SOME VEHICLES MAY EXPERIENCE SEVERAL MALFUNCTIONS REGARDING THE INTAKE FLAP MOTOR OR INTAKE MANIFOLD RUNNER POSITION SENSOR THAT MAY BE INOPERATIVE. *PE

Source components: ENGINE AND ENGINE COOLING:ENGINE.

Source record 10042995 at NHTSA
Sep 1, 2011Service Bulletin/Repair Instructions

SB090111

NHTSA communication ID: 10040959

NHTSA source summary · Original PDF not reviewed by Recallfolio

VOLKSWAGEN SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. PRODUCTION ISSUES MAY CAUSE PREMATURE WEAR ON THE INTAKE CAMSHAFT AND CAMSHAFT FOLLOWER. MALFUNCTION LIGHT WILL ILLUMINATE. *RM

Source components: FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP.

Source record 10040959 at NHTSA
Apr 6, 2011Service Bulletin/Repair Instructions

SB-15-11-20

NHTSA communication ID: 10038770

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: THE MALFUNCTION LIGHT IS ON WITH THREE POSSIBLE TROUBLE CODES STORED. THE PROBLEM IS WITH THE INTAKE CAMSHAFT. *RM

Source components: FUEL SYSTEM, GASOLINE.

Source record 10038770 at NHTSA
Dec 3, 2010Service Bulletin/Repair Instructions

AWA-10-11

NHTSA communication ID: 10037825

NHTSA source summary · Original PDF not reviewed by Recallfolio

VOLKSWAGEN: WARRANTY EXTENSION FOR THE HEADLIGHT BULBS. *RM

Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:ELECTRICAL.

Source record 10037825 at NHTSA
Oct 20, 2010Service Bulletin/Repair Instructions

TSB-94-10-38

NHTSA communication ID: 10035345

NHTSA source summary · Original PDF not reviewed by Recallfolio

AUDI: DAYTIME RUNNING LIGHTS DO NOT WORK. DAYTIME RUNNING LIGHTS DO NOT WORK ON VEHICLES WITH XENON HEADLIGHTS. THE THUMB WHEEL OR OPTION FOR DAYTIME RUNNING LIGHTS IS TURNED OFF BY MISTAKE. *PE

Source components: EXTERIOR LIGHTING:HEADLIGHTS.

Source record 10035345 at NHTSA
Sep 10, 2010Service Bulletin/Repair Instructions

2021771/3

NHTSA communication ID: 10066873

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: SUSPENSION.

Source record 10066873 at NHTSA