The vehicle dossier US · 2004
2004 Toyota
SIENNAProblems & recalls
2,062 distinct owner reports in the NHTSA snapshot. Body & structure appears in 962 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 2,062 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
75,000 miles is the median among 1,642 reports with usable mileage. The middle half spans 44,814–105,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
10 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
TIRES:TEMPORARY/EMERGENCY SPARE TIRECampaign 14V273000
Reported concern
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2004-2011 Sienna vehicles originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The affected vehicles have a spare tire carrier assembly mounted under the vehicle whose attachment cable may corrode due to high concentrations of road salt splashing onto the spare tire carrier.
Manufacturer’s stated response
Toyota sent owners in August 2014 an interim notification to advise owners of the recall and that dealers will perform an interim remedy to remove the spare tire and relocate it to the luggage compartment, free of charge. Owners are being mailed a second letter as parts become available and dealers will replace the spare tire carrier assembly with an improved one, free of charge. The remedy campaign is being performed in phases. The first phase of the recall began July 7, 2015. Owners may contact Toyota customer service at 1-800-331-4331. NOTE: 2004-2010 Siennas subject to this recall were subject to recall campaign 10V-160 initiated in 2010. Those owners are advised that they must have their vehicles remedied again under this campaign and that having the earlier recall completed did not remedy their vehicles. Additionally, model year 1998-2003 Siennas were recalled as part of safety recall 10V-160. Owners of those vehicles that have not had not the remedy performed on their vehicles, should contact their Toyota dealer to schedule a free repair.
Read campaign 14V273000 at NHTSAPOWER TRAIN:AUTOMATIC TRANSMISSIONCampaign 13V429000
Reported concern
Toyota is recalling certain model year 2004-2005 Sienna vehicles manufactured January 10, 2003, through August 10, 2005; and model year 2007-2009 Sienna vehicles manufactured February 20, 2007, through December 12, 2008. In the affected vehicles, due to a problem within the shift lock solenoid, there is a possibility that the shift lever could be moved out of Park position without depressing the brake pedal.
Manufacturer’s stated response
Toyota will mail interim notifications to owners beginning in late October 2013. When parts are available, owners will be sent a second notice and dealers will replace the shift lock solenoid, free of charge. Owners may contact Toyota at 1-800-331-4331.
Read campaign 13V429000 at NHTSAENGINE AND ENGINE COOLINGCampaign 11V539000
Reported concern
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004 AVALON VEHICLES; 2004 AND 2005 CAMRY, CAMRY SOLARA, HIGHLANDER, AND SIENNA VEHICLES, 2006 HIGHLANDER HYBRID; 2004 AND 2005 LEXUS ES330 AND RX330; AND 2006 LEXUS RX400H VEHICLES MANUFACTURED FROM JUNE 1, 2004 THROUGH MARCH 31, 2005, EQUIPPED WITH THE 1MZ-FE OR 3MZ-FE ENGINE. THE AMOUNT OF ADHESIVE AGENT APPLIED BETWEEN THE OUTER RING AND THE TORSIONAL RUBBER DAMPER (INNER RING) IN THE CRANKSHAFT PULLEY MAY BE INADEQUATE. IF THE ADHESIVE IS INSUFFICIENT, THERE IS A POSSIBILITY THAT THE OUTER RING MAY BECOME MISALIGNED AND IT MAY NOT PROPERLY ROTATE WITH THE INNER RING, CAUSING NOISE AND/OR ILLUMINATION OF THE BATTERY DISCHARGE INDICATOR LIGHT.
Manufacturer’s stated response
TOYOTA WILL NOTIFY OWNERS, AND DEALERS WILL CHECK THE CRANKSHAFT PULLEY TO IDENTIFY WHETHER IT WAS PRODUCED BY THE U.S. SUPPLIER. IF SO, THE DEALER WILL REPLACE THE PULLEY WITH A NEW ONE AT NO CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING EARLY JANUARY 2012. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Read campaign 11V539000 at NHTSASTRUCTURECampaign 10V160000
Reported concern
TOYOTA IS RECALLING CERTAIN MODEL YEAR 1998 THROUGH 2010 SIENNA PASSENGER VEHICLES MANUFACTURED BETWEEN AUGUST 7, 1997 AND JANUARY 4, 2010, CURRENTLY REGISTERED IN OR ORIGINALLY SOLD IN CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WASHINGTON DISTRICT OF COLUMBIA, VIRGINIA, WEST VIRGINIA, AND WISCONSIN. THE SUBJECT VEHICLES ARE EQUIPPED WITH THE SPARE TIRE STOWED UNDER THE VEHICLE. IF THE VEHICLE IS OPERATED IN THE COLD CLIMATE REGIONS OF THE UNITED STATES WHERE ROAD SALT IS FREQUENTLY USED, WATER SPLASHED BACKWARDS WITH HIGH CONCENTRATIONS OF ROAD SALT CAN REACH THE SPARE TIRE CARRIER AND CORRODE THE SPARE TIRE CARRIER ASSEMBLY CABLE.
Manufacturer’s stated response
TOYOTA WILL NOTIFY OWNERS WITH AN INTERIM LETTER INITIALLY INSTRUCTING THEM TO BRING THEIR VEHICLE TO AUTHORIZED DEALERS TO INSPECT FOR CORROSION. A SECOND NOTICE WILL BE SENT WHEN THE PERMANENT REMEDY IS AVAILABLE. FOR MORE INFORMATION, PLEASE SEE TOYOTA'S AMENDED RECALL REPORT OF JULY 19, 2010. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OCTOBER 12, 2010. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Manufacturer campaign: AOE
Read campaign 10V160000 at NHTSAEQUIPMENT:OTHER:LABELSCampaign 10V036000
Reported concern
SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2011 PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Manufacturer’s stated response
DEALERS WILL MAIL TO CONSUMERS THE CORRECTED LABEL OR THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 27, 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-800-301-6859.
Read campaign 10V036000 at NHTSAEQUIPMENT:OTHER:LABELSCampaign 09V234000
Reported concern
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2009 SIENNA AND 2009 LEXUS GX PASSENGER VEHICLES. THE VEHICLE CAPACITY WEIGHT ON THE TIRE AND LOADING INFORMATION LABEL AND THE GVWR ON THE CERTIFICATION LABEL IS INSUFFICIENT FOR CERTAIN VEHICLES. SOME VEHICLES WERE ACCESSORIZED THROUGH VEHICLE PROCESSING CENTERS AND HAD ACCESSORIES INSTALLED THAT CAUSED THE VEHICLE TO EXCEED THE GVWR VALUE. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO 110, "TIRE SELECTION AND RIMS," AND 49 CFR PART 567.
Manufacturer’s stated response
TOYOTA WILL NOTIFY OWNERS INSTRUCTING THEM TO RETURN THEIR VEHICLE TO A TOYOTA OR LEXUS DEALER FOR AN EXCHANGE OF THE CERTIFICATION LABEL AND THE TIRE AND LOADING INFORMATION LABEL, AN INSTALLATION OF THE LOAD CARRYING CAPACITY MODIFICATION LABEL, IF NECESSARY, AND A CORRECTION TO THE OWNER'S MANUAL. THIS REMEDY WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 10, 2009. OWNERS MAY CONTACT TOYOTA AT 1-888-270-9371.
Manufacturer campaign: SSC 9LF
Read campaign 09V234000 at NHTSAVEHICLE SPEED CONTROL:ACCELERATOR PEDALCampaign 09V023000
Reported concern
TOYOTA IS CONDUCTING A SAFETY IMPROVEMENT CAMPAIGN INVOLVING 26,501 EARLY 2004 MY SIENNA VEHICLES. IN THE EVENT THE RETENTION CLIP USED TO SECURE THE FLOOR CARPET COVER IS MISSING, THE COVER CAN INTERFERE WITH THE OPERATION OF THE ACCELERATOR PEDAL IF THE ACCELERATION PEDAL IS DEPRESSED TO NEARLY THE FULL THROTTLE POSITION.
Manufacturer’s stated response
DEALERS WILL REPLACE THE RETENTION CLIP AND FLOOR CARPET COVER AT NO CHARGE. THE CAMPAIGN BEGAN ON JANUARY 26, 2009. OWNER NOTIFICATION IS EXPECTED TO BE COMPLETED BY EARLY APRIL 2009. OWNERS MAY CONTACT TOYOTA AT 1-888-270-9371, IF THEY HAVE ANY FURTHER QUESTIONS.
Read campaign 09V023000 at NHTSASTRUCTURE:BODY:HATCHBACK/LIFTGATECampaign 08V244000
Reported concern
TOYOTA IS CONDUCTING A SAFETY IMPROVEMENT CAMPAIGN INVOLVING 196,222 MY 2004-2006 TOYOTA SIENNA VEHICLES EQUIPPED WITH POWER REAR LIFTGATE STRUTS. THE GAS STRUTS USED TO HELP LIFT AND SUPPORT THE REAR POWER LIFTGATE COULD WEAR OUT SOONER THAN EXPECTED. AS THE GAS STRUTS DETERIORATE, THE PERFORMANCE OF THE LIFTGATE WILL BEGIN TO DEGRADE AND THE POWER REAR LIFTGATE WILL OPERATE MORE SLOWLY THAN WHEN THE GAS STRUTS WERE NEW.
Manufacturer’s stated response
DEALERS WILL REPLACE THE GAS STRUTS WITH NEWLY DESIGNED GAS STRUTS THAT HAVE A LONGER SERVICE LIFE. THE CAMPAIGN BEGAN ON AUGUST 8, 2008, AND WILL BE MAILED IN THREE PHASES ENDING IN LATE DECEMBER 2008. OWNERS MAY CONTACT TOYOTA AT 1-888-270-9371.
Manufacturer campaign: 80C
Read campaign 08V244000 at NHTSASEAT BELTSCampaign 05V327000
Reported concern
ON CERTAIN MINI VANS, IN THE MIDDLE ROW SEATING POSITION, THE SHOULDER PORTION OF THE SEAT BELT MAY BIND IN THE BEZEL TRIM PIECE. THE AFFECTED SEAT BELT BEZEL IS LOCATED ON THE SHOULDER PORTION OF THE SEAT IN THE RIGHT SIDE SEAT OF THE SEVEN PASSENGER MODELS AND THE CENTER SEATING POSITION IN THE EIGHT PASSENGER MODELS.
Manufacturer’s stated response
DEALERS WILL REPLACE THE SEAT BELT BEZEL AND CLIP. THE RECALL BEGAN AUGUST 5, 2005. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Manufacturer campaign: 50L
Read campaign 05V327000 at NHTSAFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLYCampaign 03V291000
Reported concern
ON CERTAIN SPORT UTILITY VEHICLES, A PART OF THE FUEL TANK MAY BECOME DAMAGED WHEN CRASHED IN THE INSURANCE INSTITUTE FOR HIGHWAY SAFETY'S (IIHS) 40 MPH FRONTAL OFFSET CRASH TEST CONDITIONS, DUE TO THE SEVERE IMPACT FORCES GENERATED.
Manufacturer’s stated response
DEALERS WILL REPLACE THE FUEL TANK. OWNER NOTIFICATION BEGAN AUGUST 1, 2003. OWNERS SHOULD CONTACT TOYOTA AT 1-800-331-4331.
Manufacturer campaign: 30K
Read campaign 03V291000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
257 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
T-SB-0039-24 Rev2The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11012744
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11012744 at NHTSAT-SB-0038-24 Rev2To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11012743
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11012743 at NHTSAT-SB-0035-24 Rev2Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas suc…NHTSA ID 11012742
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11012742 at NHTSAT-SB-0061-23 Rev2Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Remova…NHTSA ID 11012735
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
Campaign / software reference: T-SB-0061-23 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11012735 at NHTSAT-SB-0062-23 Rev2Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be ident…NHTSA ID 11012727
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Campaign / software reference: T-SB-0062-23 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11012727 at NHTSAT-SB-0039-24 Rev1The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11007445
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11007445 at NHTSAT-SB-0038-24 Rev1To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11007444
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11007444 at NHTSAT-SB-0035-24 Rev1Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas suc…NHTSA ID 11007443
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11007443 at NHTSAT-SB-0039-24 Rev1The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11006151
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11006151 at NHTSAT-SB-0038-24 Rev1To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11006150
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11006150 at NHTSAT-SB-0035-24 Rev1Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas suc…NHTSA ID 11006149
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11006149 at NHTSAT-SB-0061-23 Rev1Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.NHTSA ID 11005153
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
Campaign / software reference: T-SB-0061-23 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11005153 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Stabilus Rear Liftgate Struts FailingEQ12010
Please see the attached closing resume summary.It has been attached to this document as a PDF.
Recorded closure: Dec 31, 2012
Find investigation EQ12010STEERING INTERMEDIATE SHAFT BINDINGEA08024
ODI'S ANALYSIS OF WARRANTY DATA SHOWS THAT THE ALLEGED DEFECT HAS OCCURRED IN JUST 0.2 PERCENT OF THE SUBJECT VEHICLE POPULATION.WHEN THE ANALYSIS IS LIMITED TO SALT-BELT STATES, THE RATE IS STILL WELL BELOW ONE PERCENT OF THE POPULATION (0.4 PERCENT).IN ADDITION, TESTS CONDUCTED BY ODI AND TOYOTA HAVE SHOWN THAT THE ALLEGED DEFECT HAS A MINIMAL AFFECT ON STEERING EFFORTS.ODI INTERVIEWS OF OWNERS WHO EXPERIENCED THE ALLEGED DEFECT INDICATED THAT IN MOST CASES THE PROBLEM WAS PRECEDED BY MONTHS OR YEARS OF NOISE OR A GRADUAL INCREASE IN STEERING EFFORTS IN THE INITIAL STEERING MANEUVERS AFTER FIRST STARTING A COLD VEHICLE.THE SUBJECT VEHICLES HAVE BEEN IN SERVICE FOR 4 TO 5 YEARS WITH NO CRASHES OR INJURIES ASSOCIATED WITH THE ALLEGED DEFECT.TOYOTA'S TECHNICAL SERVICE BULLETIN PROVIDES ASSISTANCE TO SERVICE TECHNICIANS IN THE EARLY DIAGNOSIS AND REPAIR OF THE ALLEGED DEFECT CONDITION. ACCORDINGLY, THIS INVESTIGATION HAS BEEN CLOSED. THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT A SAFETY-RELATED DEFECT DOES NOT EXIST.THE AGENCY WILL CONTINUE TO MONITOR COMPLAINTS AND OTHER INFORMATION RELATING TO THE ALLEGED DEFECT IN THE SUBJECT VEHICLES AND TAKE FURTHER ACTION IN THE FUTURE IF WARRANTED.FOR ADDITIONAL INFORMATION REGARDING THIS ENGINEERING ANALYSIS REFER TO THE EA08-024 CLOSING REPORT.
Recorded closure: Jul 16, 2009
Find investigation EA08024ACCELERATOR PEDAL INTERFERENCEEA08014
IN A JUNE 25, 2008, LETTER RESPONDING TO AN INFORMATION REQUEST FROM ODI, TOYOTA PROVIDED INFORMATION ABOUT AN ACCELERATOR PEDAL INTERFERENCE INCIDENT THAT OCCURRED DURING PRODUCTION DYNAMOMETER TESTING AT THE ASSEMBLY PLANT FOR AN EARLY PRODUCTION MY 2004 SIENNA MINIVAN.THE INCIDENT WAS CAUSED BY A MISSING RETAINING CLIP THAT ALLOWED THE CENTER CONSOLE TRIM PANEL TO INTERFERE WITH (TRAP) THE ACCELERATOR PEDAL AFTER IT HAD BEEN DEPRESSED.TOYOTA SUBSEQUENTLY IMPLEMENTED AN 100% INSPECTION REQUIREMENT FOR THE RETAINING CLIP.IN JUNE 2003, TOYOTA CHANGED THE ORIGINAL DESIGN OF THE TRIM PANEL TO ELIMINATE THE POTENTIAL FOR PEDAL INTERFERENCE IN THE EVENT THE RETAINING CLIP IS NOT PRESENT.ANALYSIS OF COMPLAINTS AND WARRANTY DATA SHOW THAT A FEW (4) INCIDENTS OF INTERFERENCE BY THE TRIM PANEL HAVE OCCURRED IN SERVICE.IN AT LEAST THREE OF THE INCIDENTS, THE INTERFERENCE OCCURRED AFTER SERVICE WAS PERFORMED THAT REQUIRED REMOVAL AND REINSTALLATION OF THE SUBJECT TRIM PANEL AND RETAINING CLIP. ON JANUARY 14, 2009, TOYOTA NOTIFIED ODI THAT THEY WOULD RECALL SUBJECT VEHICLES BUILT BETWEEN JANUARY 10, 2003 AND JUNE 11, 2003, WHEN THE ORIGINAL DESIGN FLOOR CARPET COVER WAS USED IN PRODUCTION (NHTSA RECALL NO. 09V-023).TOYOTA'S RECALL WILL INSTRUCT DEALERS TO REPLACE THE ORIGINAL FLOOR CARPET COVER WITH THE NEWER DESIGN FLOOR CARPET (AND RETENTION CLIP) AT NO CHARGE TO THE OWNER.THE REPAIR WILL REDUCE THE POTENTIAL FOR TRIM PANEL INTERFERENCE WITH THE ACCELERATOR PEDAL TRAVEL SHOULD THE RETAINING CLIPS BECOME MISSING BECAUSE OF IMPROPER SERVICE OR OTHER REASONS.THE RECALL WILL BE CONDUCTED AS A SAFETY IMPROVEMENT CAMPAIGN.
Recorded closure: Jan 26, 2009
Campaign reference in the source: 09V023000
Find investigation EA08014STEERING INTERMEDIATE SHAFT BINDINGPE08041
THE OFFICE OF DEFECTS INVESTIGATION (ODI) OPENED A PRELIMINARY EVALUATION, PE08-041, TO INVESTIGATE ALLEGATIONS OF STEERING BINDING OR INCREASED STEERING EFFORT CAUSED BY CORROSION OF STEERING INTERMEDIATE UNIVERSAL JOINTS IN MODEL YEAR (MY) 2004 TOYOTA SIENNA VEHICLES.TOYOTA'S RESPONSE TO ODI'S REQUEST FOR INFORMATION IN PE08-041 INDICATED THAT TOYOTA HAS BEEN INVESTIGATING REPORTS OF INCREASED STEERING EFFORT IN MY 2004 THROUGH 2006 SIENNA VEHICLES SINCE 2005. TOYOTA DETERMINED THAT A COMBINATION OF THERMAL DAMAGE AND SUBSEQUENT WATER INTRUSION COULD LEAD TO CORROSION OF THE LOWERMOST UNIVERSAL JOINT INSTALLED ON THE STEERING INTERMEDIATE SHAFT OF THE SUBJECT VEHICLES. TOYOTA HAS MADE PRODUCTION CHANGES SINCE SEPTEMBER 2006 TO ADDRESS THESE CONCERNS AND HAS ISSUED TWO TECHNICAL SERVICE BULLETINS TO ITS DEALERSHIPS TO PROVIDE INSTRUCTIONS ON DIAGNOSING AND REPAIRING COMPLAINTS RELATED TO CORROSION OF THE INTERMEDIATE SHAFT. TOYOTA HAS NOT DETERMINED THAT A SAFETY DEFECT EXISTS IN THE STEERING SYSTEM OF THE TOYOTA SIENNA VEHICLES AND PROVIDED TEST DATA SHOWING THAT THE EFFECT ON STEERING EFFORT IS MINIMAL, EVEN FOR PARTS WITH RELATIVELY SEVERE CORROSION. ODI ANALYZED COMPLAINT AND WARRANTY DATA RELATING TO THE FOLLOWING SYMPTOMS: (1) STEERING INTERMEDIATE SHAFT BINDING OR LOCKING; (2) CORROSION OF THE STEERING INTERMEDIATE SHAFT UNIVERSAL JOINT; (3) COMPLAINTS OF INCREASED EFFORT TO TURN THE STEERING WHEEL FROM NEUTRAL OR RETURN TO NEUTRAL AFTER TURNING (E.G., HARD STEERING OR STEERING BINDING); OR (4) NOISE WHILE STEERING.THESE ANALYSES REVEALED THAT THE SUBJECT VEHICLES HAVE EXPERIENCED A TOTAL COMPLAINT RATE OF 81.0 PER 100,000 VEHICLES AND A TOTAL WARRANTY CLAIM RATE OF 3.0 PERCENT.ODI'S ANALYSIS FOUND THAT APPROXIMATELY TWO-THIRDS OF COMPLAINTS WERE FOR NOISE ONLY.SIMILAR ANALYSIS OF THE WARRANTY DATA SHOWED THAT 91 PERCENT WERE RELATED TO NOISE CONCERNS. ODI HAS UPGRADED THIS INVESTIGATION TO AN ENGINEERING ANALYSIS (EA08-024) TO CONDUCT TESTING TO ASSESS THE EFFECT OF THE ALLEGED DEFECT ON STEERING EFFORT IN THE SUBJECT VEHICLES.
Recorded closure: Oct 28, 2008
Find investigation PE08041ACCELERATOR PEDAL INTERFERENCEPE08025
IN A JUNE 25, 2008, LETTER RESPONDING TO AN INFORMATION REQUEST FROM ODI, TOYOTA REPORTED AN APRIL 2003 UNWANTED ACCELERATION INCIDENT THAT OCCURRED DURING PRODUCTION DYNAMOMETER TESTING.ACCORDING TO THE LETTER THE INCIDENT WAS CAUSED BY A MISSING RETAINING CLIP THAT ALLOWED THE CENTER CONSOLE TRIM PANEL TO INTERFERE WITH (TRAP) THE ACCELERATOR PEDAL AFTER IT HAD BEEN DEPRESSED.IN THE AFTERMATH, TOYOTA REVIEWED THEIR MANUFACTURING PROCESSES AND OTHER DATA AND CONCLUDED THIS WAS AN ISOLATED INCIDENT.AS A SECONDARY MEASURE IN JUNE 2003, TOYOTA CHANGED THE DESIGN OF THE TRIM PANEL TO ELIMINATE THE POTENTIAL FOR PEDAL INTERFERENCE IN THE EVENT THE RETAINING CLIP IS NOT PRESENT. DURING A JULY 2008 MEETING WITH ODI, TOYOTA DEMONSTRATED HOW AN UNRESTRAINED EARLY DESIGN LEVEL TRIM PANEL INTERACTS WITH THE ACCELERATOR AFTER PEDAL DEPRESSION.TOYOTA ALSO ADVISED THAT THEY WERE CONDUCTING A FIELD SURVEY TO EXAMINE PANEL RETENTION AND THAT PRELIMINARILY ONE VEHICLE HAD BEEN IDENTIFIED WITH A CONCERN. NHTSA'S VEHICLE RESEARCH AND TEST CENTER IS ALSO CONDUCTING A SURVEY OF SUBJECT VEHICLES; PRELIMINARILY TWO RESPONSES ALLEGE A CONCERN.BEFORE OPENING PE08-025, ODI STAFF ALSO FOUND A SUBJECT VEHICLE WITH A MISSING RETAINING CLIP DURING A FIELD EVALUATION.NOTE THAT ODI IS NO LONGER COUNTING THE SINGLE COMPLAINT THAT WAS IN THE OPENING RESUME FOR PE08-025 AS IT WAS DETERMINED THAT THE VEHICLE INVOLVED WAS NOT EQUIPPED WITH THE SUBJECT TRIM PANEL. PE08-025 HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS (EA08-014) TO GATHER ADDITIONAL INFORMATION ABOUT HOW MANY SUBJECT VEHICLES MAY CURRENTLY HAVE ISSUES WITH THE RETAINING CLIP AND ASSESS THE FUTURE RISK OF PEDAL INTERFERENCE INCIDENTS DUE TO MISSING CLIPS.
Recorded closure: Aug 8, 2008
Find investigation PE08025UNEXPECTED CLOSING OF POWER LIFTGATEEA06020
ON MAY 30, 2008, TOYOTA INITIATED A SAFETY RECALL TO REPLACE THE LIFTGATE STRUTS IN APPROXIMATELY 196,000 MODEL YEAR 2004-2006 TOYOTA SIENNA VEHICLES EQUIPPED WITH POWER LIFTGATES (RECALL 08V-244).THE RECALL WILL PROVIDE THE OPPORTUNITY FOR VEHICLE OWNERS TO OBTAIN NEW STRUTS THAT ARE MORE ROBUST.BASED ON THESE ACTIONS, THE AGENCY HAS DECIDED TO CLOSE THE INVESTIGATION.WHILE TOYOTA HAS NOT MADE A DECISION THAT THE RECALLED VEHICLES CONTAIN A SAFETY-RELATED DEFECT, IN VIEW OF THE RECALL, FURTHER USE OF THE AGENCY'S RESOURCES DOES NOT APPEAR TO BE WARRANTED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE ANY FINDING BY NHTSA.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.ADDITIONAL INFORMATION CAN BE FOUND IN THE ENGINEERING ANALYSIS REPORT.
Recorded closure: Jun 25, 2008
Campaign reference in the source: 08V244000
Find investigation EA06020UNEXPECTED LIFTGATE CLOSINGPE06029
THE LIFTGATE GAS STRUTS FOR THE SUBJECT VEHICLES MAY HAVE DAMAGED GAS SEALS THAT ALLOW THE LIFTGATE TO DROP UNEXPECTEDLY.THE RATES FOR COMPLAINTS, ALLEGED INJURIES AND WARRANTY CLAIMS ARE HIGHER FOR VEHICLES WITH THE POWER LIFTGATE OPTION.THE POWER LIFTGATE MAY AUTOMATICALLY POWER-CLOSE AT THE COMPLETION OF A POWER-OPEN COMMAND WITHOUT INPUT FROM THE OPERATOR.SOME OWNERS ARE CAUGHT UNAWARE OF THE POWER-CLOSE OPERATION WHILE UNDER THE REAR LIFTGATE DOOR.ODI HAS UPGRADED THE INVESTIGATION TO AN ENGINEERING ANALYSIS (EA06-020) AND MODIFIED THE SCOPE TO INCLUDE ONLY THE SUBJECT VEHICLES WITH THE POWER LIFTGATE OPTION.
Recorded closure: Dec 1, 2006
Find investigation PE06029TIRE PRESSURE WARNING SYSTEM FAILUREPE06010
ODI OPENED PE06-010 BASED ON 12 REPORTS OF ALLEGED TIRE PRESSURE WARNING SYSTEM (TPWS) FAILURE ON THE SUBJECT VEHICLES.ALL REPORTS ALLEGED THAT THE TPWS WARNING LIGHT DID NOT ILLUMINATE ON THE DRIVER INFORMATION PANEL WHEN THE TIRE PRESSURE WAS LOW OR THE TIRE WAS FLAT.IN SOME INCIDENTS, THE CONSUMER REPORTED THAT TPWS LIGHT DID NOT ILLUMINATE WHEN THE TIRE PRESSURE IN 1 TIRE WAS AT 15-20 PSI AND THE OTHER TIRES WERE AT OR NEAR THE RECOMMENDED TIRE PRESSURE.DURING PE06-010, ADDITIONAL FAILURE DATA WAS IDENTIFIED AS NOTED IN THE FAILURE REPORT SUMMARY ABOVE.AS OF JULY 25, 2006, ODI WAS NOT AWARE OF ANY ALLEGATIONS WHERE THE ALLEGED DEFECT RESULTED IN A CRASH, AN INJURY, OR A FATALITY IN THE SUBJECT VEHICLES.IN ADDITION, ODI IS AWARE OF ONLY TWO INCIDENTS WHERE A TIRE WAS REPORTED TO HAVE CAUGHT ON FIRE DURING THE INCIDENT.IN BOTH INCIDENTS, FIRE DAMAGE WAS LIMITED TO THE REAR PASSENGER TIRE AND TIRE WELL AND/OR SMOKE DAMAGE TO ITEMS IN THE VEHICLE.ODI'S ANALYSIS SHOWED THE FOLLOWING:(1) THE SUBJECT VEHICLES USE AN INDIRECT TPWS SYSTEM WITH P225/60R17BRIDGESTONE B380 OR DUNLOP SP SPORT 4000 DSST RUN FLAT TIRES(RFTS). (2) THERE IS A LARGE VARIABILITY IN THE PRESSURE AND DRIVING TIME ATWHICH THE TPWS WILL TRIGGER THE TPWS WARNING LIGHT TOILLUMINATE. (3) THE TPWS MAY NOT MAKE AN ACCURATE JUDGMENT UNDER A VARIETY OFROAD OR DRIVING CONDITIONS, INCLUDING IF THE VEHICLE IS DRIVENOVER 62 MPH, THE OUTSIDE TEMPERATURE IS BELOW 32 DEGREESFAHRENHEIT, THE TREAD WEAR IS UNEVEN, THE LOADING IS OVERTHE LIMIT, OR THE PRESSURE OF 2 OR MORE TIRES DROPS AT THE SAMETIME. (SEE TOYOTA'S APRIL 10, 2006 INFORMATION REQUEST RESPONSEFOR MORE DETAILS.) (4) SOME CONSUMERS REPORTED THAT THEIR TIRE PRESSURE WAS BELOW 15PSI OR EVEN AS LOW AS 0 PSI BEFORE THEY REALIZED THAT THEY HAD ATIRE PRESSURE ISSUE AND AS A RESULT HAD TO REPLACE THE TIRE. NOTE: TOYOTA STATES THAT IF THE TIRE PRESSURE DROPS TO BELOW 15PSI, THE TIRE CAN NOT BE REPAIRED. (5) IN APRIL 2006, IN RESPONSE TO REPORTS OF PREMATURE OR UNEVEN TIREWEAR, TOYOTA ISSUED A CUSTOMER SUPPORT PROGRAM TO PROVIDESUPPLEMENTAL TIRE WARRANTY COVERAGE FOR 2004-EARLY 2006 MYSIENNA VEHICLES WITH RFTS. (6) FIELD DATA AND NHTSA TESTING SHOWED THAT THE TPWS ON THE 2004-2005 MY TOYOTA SIENNA 2WD VEHICLES, WHICH USE THE SAME TPWS AS THE SUBJECT VEHICLES, BUT HAVE STANDARD TIRES, PERFORMED BETTERTHAN TPWS ON THE SUBJECT VEHICLES.DUE TO THE FOLLOWING REASONS, ODI HAS DECIDED THAT FURTHER EXPENDITURE OF AGENCY RESOURCES ON THIS INVESTIGATION IS NOT WARRANTED AT THIS TIME: (1) ONLY A VERY SMALL PERCENTAGE OF TPWS AND TIRE RELATED COMPLAINTS AND WARRANTY CLAIMS CITED THAT THE TPWS DID NOT ILLUMINATE ON THE SUBJECT VEHICLE DURING THE INCIDENT.IN THE REMAINING TIRE RELATED INCIDENTS, IT WAS NOT POSSIBLE TO DETERMINE IF THE TPWS CONTRIBUTED TO THE TIRE RELATED FAILURE. (2) ODI IS NOT AWARE OF ANY INCIDENTS THAT WERE REPORTED THATRESULTED IN THE DRIVER LOSING VEHICLE CONTROL. (3) THE FIELD DATA DID NOT ESTABLISH A RELATIONSHIP BETWEEN POORTPWS PERFORMANCE AND TIRE INCIDENTS WITH SAFETY CONSEQUENCESACCORDINGLY, THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT A SAFETY-RELATED DEFECT DOES NOT EXIST.THE AGENCY WILL CONTINUE TO MONITOR COMPLAINTS AND OTHER INFORMATION RELATING TO THE ALLEGED DEFECT IN THE SUBJECT VEHICLES AND TAKE FURTHER ACTION IN THE FUTURE IF WARRANTED.
Recorded closure: Aug 2, 2006
Find investigation PE06010SEATBELT MALFUNCTIONEA05010
THE SHOULDER PORTION OF THE MIDDLE-ROW SEATBELT WEBBING FEEDS THROUGH AN OPENING IN THE SEATBELT BEZEL LOCATED AT THE TOP OF THE SEAT.THE BEZEL ALSO CONTAINS A CLIP THAT COVERS A NARROW SLOT IN THE BEZEL.THE CLIP MAY BECOME DISLODGED FROM USE AND ALLOW THE SEAT BELT TO BECOME STUCK IN THE NARROW SLOT EXPOSED BY THE DISLODGED CLIP. IN ADDITION TO ODI'S 10 CONSUMER COMPLAINTS, TOYOTA'S LETTER RESPONSE TO THE AGENCY IDENTIFIES 40 OTHER CONSUMER AND FIELD REPORTS AND 3,089 WARRANTY REPAIRS THAT REQUIRED THE REPLACEMENT OF THE SEATBELT BEZEL AND/OR CLIP.A STUCK OR JAMMED SEATBELT DOES NOT OFFER PROPER OCCUPANT PROTECTION IN THE EVENT OF A VEHICLE CRASH.TOYOTA HAS NOTIFIED THE AGENCY BY LETTER DATED JULY 19, 2005 (AMENDED IN LETTER DATED JULY 22, 2005), THAT IT WILL RECALL 345,443 MY 2004-2005 7-PASSENGER AND 8-PASSENGER SIENNA VEHICLES BUILT FROM THE START OF PRODUCTION UP TO MAY 18, 2005.TOYOTA DEALERS WILL REPLACE THE SEATBELT BEZEL AND CLIP WITH AN IMPROVED DESIGN ON ALL VEHICLES.VEHICLES PRODUCED BEGINNING MAY 18 ALREADY HAVE THE IMPROVED SEATBELT BEZEL AND CLIP.THIS INVESTIGATION IS CLOSED.
Recorded closure: Aug 2, 2005
Campaign reference in the source: 05V327000
Find investigation EA05010SEATBELT MALFUNCTIONPE05008
ODI RECEIVED TEN CONSUMER COMPLAINTS ALLEGING THAT THE MIDDLE-ROW PASSENGER SEATBELT WEBBING FREQUENTLY JAMS IN THE INTEGRATED SEATBELT GUIDE HOUSING SLOT.DURING NORMAL BODY MOVEMENT OF THE OCCUPANT, THE WEBBING JAMS IN THE SLOT DUE TO A DISLODGED COVER PLATE, THUS CAUSING EXCESS SLACK IN THE SEATBELT ASSEMBLY.TOYOTA?S LETTER RESPONSE TO THE AGENCY IDENTIFIES 40 OTHER CONSUMER AND FIELD REPORTS AND 3,073 WARRANTY REPAIRS THAT REQUIRE THE REPLACEMENT OF THE SEATBELT GUIDE ASSEMBLY.IN ADDITION, THERE ARE ANOTHER 16 WARRANTY CLAIMS ON MY 2005 SIENNA VEHICLES.COMPLAINANTS EXPRESSED CONCERN FOR CHILDREN OCCUPYING THE MIDDLE-ROW SEATS.THEY MAY NOT RECOGNIZE THE POTENTIAL SAFETY RISK OR BE ABLE TO REMEDY A SLACK SEATBELT.A SLACK OR JAMMED SEATBELT DOES NOT OFFER PROPER OCCUPANT PROTECTION IN THE EVENT OF A CRASH.TOYOTA HAS IMPLEMENTED A RECENT DESIGN CHANGE TO CORRECT THE PROBLEM.TOYOTA WILL APPLY THE DESIGN CHANGE TO NEW PRODUCTION VEHICLES AND ALTHOUGH THE DESIGN CAN BE APPLIED TO EARLIER MY 2004 AND 2005 VEHICLES, TOYOTA HAS NOT ANNOUNCED A SAFETY RECALL FOR THOSE VEHICLES.THIS INVESTIGATION IS UPGRADED TO AN ENGINEERING ANALYSIS (EA05-010) AND WILL INCLUDE MY 2005 VEHICLES.
Recorded closure: Jun 13, 2005
Find investigation PE05008Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.