The vehicle dossier US · 2009

2009 Toyota
COROLLAProblems & recalls

1,459 distinct owner reports in the NHTSA snapshot. Air bags appears in 552 of them. Explore what was reported—and which official actions are on file.

Snapshot Sep 28, 2026Live NHTSA complaint API How this dossier is compiled

01 / Owner-reported evidence

What owners reported.

Categories attached to 1,459 distinct reports. A report can mention more than one component, so category totals can overlap.

Air bags552 reports
Steering382 reports
Other components304 reports
Engine133 reports
Brakes119 reports
Electrical system89 reports
Transmission & drivetrain45 reports
Body & structure42 reports
Suspension31 reports
Fuel system24 reports
Visibility22 reports
See original component labels
AIR BAGS543
STEERING379
VEHICLE SPEED CONTROL170
ENGINE91
ELECTRICAL SYSTEM82
SERVICE BRAKES, HYDRAULIC60
UNKNOWN OR OTHER36
POWER TRAIN34
SERVICE BRAKES32
ENGINE AND ENGINE COOLING28
STRUCTURE:BODY28
VEHICLE SPEED CONTROL:ACCELERATOR PEDAL27
SUSPENSION26
ELECTRONIC STABILITY CONTROL (ESC)19
SERVICE BRAKES, ELECTRIC14
FUEL SYSTEM, GASOLINE14
VISIBILITY12
TIRES12
STRUCTURE10
WHEELS9
SEAT BELTS8
ENGINE AND ENGINE COOLING:ENGINE7
AIR BAGS:FRONTAL7
SEATS7
VISIBILITY/WIPER7
POWER TRAIN:AUTOMATIC TRANSMISSION6
EXTERIOR LIGHTING5
SUSPENSION:FRONT5
SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM5
EQUIPMENT ADAPTIVE/MOBILITY5
EQUIPMENT5
FUEL/PROPULSION SYSTEM5
AIR BAGS:SIDE/WINDOW4
POWER TRAIN:MANUAL TRANSMISSION3
LATCHES/LOCKS/LINKAGES3
FUEL SYSTEM, OTHER3
STEERING:ELECTRIC POWER ASSIST SYSTEM3
SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP3
SEATS:FRONT ASSEMBLY:HEAD RESTRAINT2
TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS2
ENGINE AND ENGINE COOLING:COOLING SYSTEM2
STRUCTURE:FRAME AND MEMBERS2
SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES2
ELECTRICAL SYSTEM:12V/24V/48V BATTERY2
SERVICE BRAKES, AIR2
POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:FLOOR SHIFT2
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM2
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL2
PARKING BRAKE2
TRACTION CONTROL SYSTEM2
SEAT BELTS:REAR/OTHER2
ELECTRICAL SYSTEM:WIRING2
ELECTRICAL SYSTEM:HORN2
VISIBILITY:REAR WINDOW WIPER/WASHER1
STEERING:LINKAGES:TIE ROD ASSEMBLY1
VISIBILITY:WINDSHIELD1
LATCHES/LOCKS/LINKAGES:DOORS:LATCH1
STRUCTURE:BODY:BUMPERS1
SEAT BELTS: REAR/OTHER:BUCKLE ASSEMBLY1
FUEL SYSTEM, DIESEL1
STRUCTURE:BODY:TRUNK LID1
EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.1
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY1
CHILD SEAT1
EQUIPMENT:MECHANICAL:ACCESSORY SCISSOR/SCREW/BOTTLE JACK/LIFT1
EXTERIOR LIGHTING:HEADLIGHTS1
VISIBILITY:WINDSHIELD WIPER/WASHER1
STEERING:RACK AND PINION1
SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT1
ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN1
EQUIPMENT:ELECTRICAL1
EQUIPMENT:APPLIANCE:AIR CONDITIONER1
VEHICLE SPEED CONTROL:CRUISE CONTROL1
ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR1
STRUCTURE:BODY:DOOR1
Other/I am not sure1

These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.

The reporting timeline

When reports arrived.

Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.

Year filed (last two digits)Latest report: Apr 16, 2024
Mileage, where supplied

23,000 miles is the median among 839 reports with usable mileage. The middle half spans 5,400–61,000 miles.

This describes the submitted reports. It does not predict when a vehicle will fail.

02 / Official safety campaigns

13 recall campaigns on file.

A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.

Oct 17, 2019 Safety recallAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULECampaign 19V741000

Reported concern

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Manufacturer’s stated response

Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

Manufacturer campaign: J0A, J0B, J0C, JLI

Read campaign 19V741000 at NHTSA
Jan 9, 2018 Safety recallAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULECampaign 18V024000

Reported concern

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2013 Scion xB, Toyota Corolla, Corolla Matrix, Sienna, 4Runner, Lexus IS250, IS350, IS250C, IS350C, IS-F, and GX460 vehicles sold, ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP (Saipan), and the U.S. VI or "Zone A." Toyota is also recalling certain 2010 Scion xB, Toyota Corolla, Corolla Matrix, Yaris, 4Runner, Lexus IS250, IS350, IS250C, IS350C, ES350, IS-F, GX460, and Pontiac Vibe vehicles sold, ever registered, in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." Toyota is also recalling certain 2009 Scion xB, Toyota Corolla, Corolla Matrix, Yaris, Lexus IS250, IS350, ES350, IS-F, and Pontiac Vibe vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Manufacturer’s stated response

Toyota will notify the Toyota, Scion and Lexus owners. General Motors will contact the Pontiac owners. Depending on the vehicle model, dealers will replace the front passenger air bag inflator, or replace the air bag assembly. The recall began on January 29, 2018. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. Toyota's numbers for this recall are "Zone A" Toyota: G0P, Lexus: GLG; "Zone B" Toyota: G0R, Lexus GLH; "Zone C" Toyota: H0A, and Lexus: HLA.

Manufacturer campaign: See attached report

Read campaign 18V024000 at NHTSA
Jan 9, 2017 Safety recallAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULECampaign 17V006000

Reported concern

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2012 Toyota 4Runner, Corolla, Corolla Matrix, Sienna, Yaris, Scion xB, Lexus ES350, GX460, IS-F, IS250, IS350, IS250C, IS350C, and Lexus LFA vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Toyota is recalling certain 2009 Toyota Corolla, Corolla Matrix, Yaris, Yaris HB, Scion xB, Pontiac Vibe, Lexus, ES350, IS250, IS350, and IS-F vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, Toyota is recalling certain 2006-2008 Lexus IS250 and IS350, 2007-2008 Lexus ES350, Toyota Yaris, Yaris HB, and 2008 Lexus IS-F and Scion xB vehicles originally sold, or ever registered in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Manufacturer’s stated response

Toyota will notify the Toyota, Scion and Lexus owners. General Motors will contact the Pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on February 1, 2017. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. Toyota's numbers for final remedy for this campaign are G0P (Toyota Zone A), G0R (Toyota Zone B), H0A (Toyota Zone C), GLG (Lexus Zone A), GLH (Lexus Zone B) and HLA (Lexus Zone C).

Read campaign 17V006000 at NHTSA
Jun 2, 2016 Safety recallSEATS:FRONT ASSEMBLY:SEAT HEATER/COOLERCampaign 16V396000

Reported concern

Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.

Manufacturer’s stated response

SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.

Manufacturer campaign: SET16B

Read campaign 16V396000 at NHTSA
May 23, 2016 Safety recallAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULECampaign 16V340000

Reported concern

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2011 Scion xB and Lexus IS F, 2009-2011 Toyota Corolla and Corolla Matrix, 2006-2011 Toyota Yaris, Lexus IS250 and Lexus IS350, 2010-2011 Toyota 4Runner, Lexus IS250C, Lexus IS350C and Lexus GX460, 2011 Sienna, 2007-2011 Lexus ES350, and 2009-2010 Pontiac Vibe vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Toyota is recalling certain model year 2008 Scion xB and Lexus IS F, 2007-2008 Toyota Yaris, 2006-2008 Lexus IS250 and Lexus IS350 and 2007-2008 Lexus ES350 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Vehicles of these model years and models that were not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Manufacturer’s stated response

Toyota will notify the Toyota and Lexus owners. General Motors will contact the Pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on December 6, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for interim notification for this campaign are G1P (Toyota Zone A), G1R (Toyota Zone B), G2G (Lexus Zone A), and G2H (Lexus Zone B). Toyota's numbers for final remedy for this campaign are G0P (Toyota Zone A), G0R (Toyota Zone B), GLG (Lexus Zone A), and GLH (Lexus Zone B).

Manufacturer campaign: TG1P/G1R L:G2G/G2H

Read campaign 16V340000 at NHTSA
Oct 22, 2015 Safety recallVISIBILITY:POWER WINDOW DEVICES AND CONTROLSCampaign 15V689000

Reported concern

Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.

Manufacturer’s stated response

Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.

Manufacturer campaign: C0M

Read campaign 15V689000 at NHTSA
Apr 9, 2014 Safety recallAIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULECampaign 14V168000

Reported concern

Toyota is recalling certain model year 2006-2008 RAV4, 2006-2010 Yaris, 2008-2010 Highlander, and 2009-2010 Tacoma, Corolla, Corolla Matrix and General Motors Pontiac Vibe vehicles. In the affected vehicles, the steering column assembly contains electrical connections to the driver's airbag module housed in a spiral cable assembly, which includes a Flexible Flat Cable (FFC). Due to the shape and location of the FFC's retainer, the FFC could become damaged when the steering wheel is turned.

Manufacturer’s stated response

Toyota will notify the Toyota vehicle owners, and General Motors will notify the Pontiac Vibe owners. Toyota sent owners an interim notification letter in May 2014 to advise owners of the recall. Toyota will mail owners a second letter when remedy parts are available. General Motors sent Pontiac Vibe owners an Interim letter on June 20, 2014 notifying them that parts are currently unavailable. General Motors sent notices to the Pontiac Vibe owners on September 15, 2014, that a remedy is available. The recall began on October 27, 2014. Owners may contact Toyota at 1-800-331-4331. Owners may contact General Motors at 1-800-762-2737.

Read campaign 14V168000 at NHTSA
Oct 10, 2012 Safety recallVISIBILITY:POWER WINDOW DEVICES AND CONTROLSCampaign 12V491000

Reported concern

Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.

Manufacturer’s stated response

Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.

Read campaign 12V491000 at NHTSA
Feb 3, 2010 Safety recallEQUIPMENT:OTHER:LABELSCampaign 10V036000

Reported concern

SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2011 PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Manufacturer’s stated response

DEALERS WILL MAIL TO CONSUMERS THE CORRECTED LABEL OR THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 27, 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-800-301-6859.

Read campaign 10V036000 at NHTSA
Feb 3, 2010 Safety recallEQUIPMENT:OTHER:LABELSCampaign 10V035000

Reported concern

GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Manufacturer’s stated response

DEALERS WILL MAIL TO CONSUMERS THE CORRECTED LABEL OR THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL FREE OF CHARGE. DEALERS WILL ALSO CORRECT THE OWNER'S MANUAL. THE SAFETY RECALL BEGAN ON MAY 27, 2010. OWNERS MAY CONTACT GULF STATES TOYOTA AT 713-580-3300.

Read campaign 10V035000 at NHTSA
Jan 27, 2010 Safety recallVEHICLE SPEED CONTROL:ACCELERATOR PEDALCampaign 10V023000

Reported concern

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2008-2010 HIGHLANDER, MODEL YEAR 2009-2010 COROLLA, VENZA AND MATRIX PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT. THIS RECALL IS AN EXPANSION OF A CAMPAIGN OF 3.8 MILLION OTHER TOYOTA VEHICLES ANNOUNCED IN 2009 FOR THE SAME ISSUE (SEE 09V-388).

Manufacturer’s stated response

TOYOTA WILL MODIFY OR REPLACE THE ACCELERATOR PEDALS ON THE SUBJECT VEHICLES. FLOOR SURFACE MODIFICATIONS ARE ALSO BEING CONSIDERED AND WILL BE INCLUDED FOR ANY MODEL FOR WHICH IT IS DEEMED APPROPRIATE. INITIALLY, DEALERS WILL BE INSTRUCTED ON HOW TO RESHAPE THE ACCELERATOR PEDAL FOR THE REPAIR. AS REPLACEMENT PARTS WITH THE SAME SHAPE AS THE MODIFIED PEDAL BECOME AVAILABLE, THEY WILL BE MADE AVAILABLE TO THE DEALERS FOR THE REPAIR. CUSTOMERS WHO HAVE HAD THE PEDAL RESHAPE REMEDY COMPLETED WILL HAVE THE OPPORTUNITY TO RECEIVE A NEW PEDAL IF THEY DESIRE, AFTER REPLACEMENT PEDALS BECOME AVAILABLE. IN ADDITION, TOYOTA WILL REPLACE ANY TOYOTA ALL-WEATHER FLOOR MAT IN A SUBJECT VEHICLE WITH A NEWLY DESIGNED MAT, FREE OF CHARGE. FOR THOSE CUSTOMERS WHO HAVE THE PREVIOUS DESIGN ALL-WEATHER FLOOR MAT BUT DO NOT NEED OR WANT THE NEWLY DESIGNED ALL-WEATHER FLOOR MAT, TOYOTA WILL RECOVER THE PREVIOUS DESIGN ALL-WEATHER FLOOR MAT AND REIMBURSE ITS PRICE. THE SAFETY RECALL BEGAN MARCH 30, 2010. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.

Manufacturer campaign: 90L

Read campaign 10V023000 at NHTSA
Jan 21, 2010 Safety recallVEHICLE SPEED CONTROL:ACCELERATOR PEDALCampaign 10V017000

Reported concern

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 AVALON, MODEL YEAR 2007-2010 CAMRY, MODEL YEAR 2009-2010 COROLLA, COROLLA MATRIX, RAV4, MODEL YEAR 2010 HIGHLANDER, MODEL YEAR 2008-2010 SEQUOIA, AND MODEL YEAR 2007-2010 TUNDRA VEHICLES. DUE TO THE MANNER IN WHICH THE FRICTION LEVER INTERACTS WITH THE SLIDING SURFACE OF THE ACCELERATOR PEDAL INSIDE THE PEDAL SENSOR ASSEMBLY, THE SLIDING SURFACE OF THE LEVER MAY BECOME SMOOTH DURING VEHICLE OPERATION. IN THIS CONDITION, IF CONDENSATION OCCURS ON THE SURFACE, AS MAY OCCUR FROM HEATER OPERATION (WITHOUT A/C) WHEN THE PEDAL ASSEMBLY IS COLD, THE FRICTION WHEN THE ACCELERATOR PEDAL IS OPERATED MAY INCREASE, WHICH MAY RESULT IN THE ACCELERATOR PEDAL BECOMING HARDER TO DEPRESS, SLOWER TO RETURN, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION.

Manufacturer’s stated response

DEALERS WILL INSTALL A REINFORCEMENT BAR IN THE ACCELERATOR PEDAL WHICH WILL ALLOW THE PEDAL TO OPERATE SMOOTHLY. GM WILL NOTIFY OWNERS FOR THE PONTIAC VIBE PLEASE SEE 10V-018. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON FEBRUARY 5, 2010 AND WILL BE COMPLETED ON MARCH 15, 2010. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.

Manufacturer campaign: AOA

Read campaign 10V017000 at NHTSA
Aug 27, 2009 Safety recallSERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUMCampaign 09V338000

Reported concern

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2008-2009 SCION XD AND MY 2009-2010 COROLLA, AND COROLLA MATRIX VEHICLES EQUIPPED WITH 1.8L ENGINE AND ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF ALASKA, COLORADO, IDAHO, ILLINOIS, IOWA, KANSAS, MAINE, MICHIGAN, MINNESOTA, MONTANA, NEBRASKA, NEVADA, NEW HAMPSHIRE, NEW YORK, NORTH DAKOTA, SOUTH DAKOTA, VERMONT, WISCONSIN, AND WYOMING. WHEN DRIVING UNDER CERTAIN UNIQUE CONDITIONS IN EXTREMELY LOW AMBIENT TEMPERATURES, THE INTAKE MANIFOLD SUCTION PORT FOR THE BRAKE VACUUM CAN BECOME BLOCKED DUE TO THE FREEZING OF CONDENSATION RESULTING FROM POSITIVE CRANKCASE VENTILATION.

Manufacturer’s stated response

DEALERS WILL INSTALL A NEWLY DESIGNED INTAKE AIR CONNECTOR WHICH WILL RELOCATE THE BRAKE SYSTEM VACUUM PORT. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 21, 2009. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.

Read campaign 09V338000 at NHTSA
Check this car’s VIN at NHTSA

03 / The manufacturer’s record

Instructions. Updates. Responses.

372 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.

Jan 7, 2026 Service Bulletin/Repair InstructionsT-SB-0055-24 Rev2Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose…NHTSA ID 11028712

Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Campaign / software reference: T-SB-0055-24 Rev2

Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 11028712 at NHTSA
Dec 6, 2024 Service Bulletin/Repair InstructionsT-SB-0039-24 Rev2The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11012744

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24 Rev2

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11012744 at NHTSA
Dec 6, 2024 Service Bulletin/Repair InstructionsT-SB-0038-24 Rev2To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11012743

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

Campaign / software reference: T-SB-0038-24 Rev2

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11012743 at NHTSA
Dec 6, 2024 Service Bulletin/Repair InstructionsT-SB-0035-24 Rev2Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas suc…NHTSA ID 11012742

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24 Rev2

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11012742 at NHTSA
Dec 5, 2024 Service Bulletin/Repair InstructionsT-SB-0061-23 Rev2Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Remova…NHTSA ID 11012735

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

Campaign / software reference: T-SB-0061-23 Rev2

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11012735 at NHTSA
Dec 3, 2024 Service Bulletin/Repair InstructionsT-SB-0062-23 Rev2Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be ident…NHTSA ID 11012727

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

Campaign / software reference: T-SB-0062-23 Rev2

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11012727 at NHTSA
Jul 29, 2024 Service Bulletin/Repair InstructionsT-SB-0055-24 Rev1Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose…NHTSA ID 11007455

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

Campaign / software reference: T-SB-0055-24 Rev1

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11007455 at NHTSA
Jul 29, 2024 Service Bulletin/Repair InstructionsT-SB-0055-24 Rev1Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose…NHTSA ID 11006161

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

Campaign / software reference: T-SB-0055-24 Rev1

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11006161 at NHTSA
Jul 12, 2024 Service Bulletin/Repair InstructionsT-SB-0039-24 Rev1The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11007445

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24 Rev1

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11007445 at NHTSA
Jul 12, 2024 Service Bulletin/Repair InstructionsT-SB-0038-24 Rev1To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11007444

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

Campaign / software reference: T-SB-0038-24 Rev1

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11007444 at NHTSA
Jul 12, 2024 Service Bulletin/Repair InstructionsT-SB-0035-24 Rev1Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas suc…NHTSA ID 11007443

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24 Rev1

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11007443 at NHTSA
Jul 12, 2024 Service Bulletin/Repair InstructionsT-SB-0039-24 Rev1The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11006151

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24 Rev1

Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.

Source record 11006151 at NHTSA
Browse all manufacturer records by page

Records below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.

04 / Agency investigations

Official inquiries.

An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.

Opened Sep 17, 2021 No close date recordedDesiccated Air Bag Inflator RuptureEA21002

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Find investigation EA21002
Opened Sep 19, 2014 ClosedLow-speed surgingDP14003

The Agency received a petition on September 11, 2014 requesting an investigation into, low-speed surging in the 2006-2010 Toyota Corolla [vehicles] with ETCS-i, in which the brakes fail to stop the vehicle in time to prevent a crash.NHTSA conducted a technical review of the material cited and provided by the petitioner, material Toyota submitted in response to a NHTSA formal request, interviews with complainants and manufacturer representatives, as well as the results of testing of the complaint vehicle.Taking into account the allocation of agency resources, agency priorities, and the likelihood that an additional investigation would result in a finding that a defect related to motor vehicle safety exists, NHTSA has concluded that further investigation of the issues raised by the petition is not warranted.The agency accordingly has denied the petition.The official petition denial, as published in the Federal Register, is available in the document file for this defect petition, as well as copies of reference material related to the denial.Regarding the VOQs associated with the closing of this investigation, the scope as defined by the petitioner is MY 2006 through 2010 Toyota Corollas.Of the 163 VOQs submitted by the petitioner, 149 are within that specific population (11 of the 163 were outside the model and model year scope of investigation as defined by the petitioner and 3 VOQs were submitted by owners from foreign countries) and 6 of the 163 are duplicate submissions.Therefore, there are 143 unique vehicles vins are within the specific population.Of the 143 only 105 fit the alleged defect category as defined by the petitioner.The single complaint and crash noted in the Failure Report above is the petitioner's VOQ.The 143 VOQs are: 10165337, 10166526, 10209540, 10216514, 10256808 (duplicate with 10266580 and 10335955), 10272505, 10293497, 10293688, 10294727, 10297407, 10298012, 10302217, 10302877, 10303106, 10303469, 10303730, 10304192, 10305748, 10305845, 10306012, 10306480, 10307953, 10310973, 10311137, 10311176, 10311185, 10311756, 10312246, 10312272 (duplicate with 10343088), 10312771, 10313972, 10314880, 10315240, 10315442, 10315836, 10315927, 10316192, 10316627, 10316643, 10316800, 10316952, 10317128, 10317598, 10317725, 10317804, 10317894, 10317972, 10317978, 10318562, 10319589, 10320693, 10320720, 10322163, 10322213, 10322333, 10322415, 10324355, 10325755, 10326481, 10327623, 10328492, 10328519, 10329537, 10330026 (duplicate with 10356866), 10330952, 10332679, 10334005 (duplicate with 10340570 and 10547602), 10334028, 10334628, 10334936, 10336649, 10339772, 10339969, 10341515, 10342670, 10342932, 10343174, 10344874, 10345714, 10348120, 10350342, 10351112, 10352668, 10352691, 10353587, 10358767, 10359645, 10360875, 10360905, 10361254, 10363529, 10363685, 10363866, 10364127, 10366100, 10366413, 10369073, 10369494, 10371991, 10376535, 10376721, 10377193, 10379320, 10380210, 10381365, 10381849, 10382018, 10392618, 10396747, 10402827, 10412382, 10433860, 10437011, 10437801, 10450183, 10461118, 10479582, 10482133, 10489344, 10494568, 10496026, 10499932, 10520195, 10521013, 10523677, 10534094, 10537426, 10543949, 10549101, 10551478, 10552563, 10558153, 10562577, 10564980, 10566370, 10572873, 10578871, 10579722, 10587140, 10597296, 10621449, and 10637908 (which is the petitioner's VOQ and not one of the 163 submitted with the petition).The three VOQs that were submitted from foreign countries: 10303105, 10303749, and 10308974. The eleven VOQs that are out of the specified population by model or model year: 10447756, 10453401, 10490200, 10507434, 10521377, 10563214, 10563585, 10575230, 10583796, 10584534,

Recorded closure: Apr 29, 2015

Find investigation DP14003
Opened Feb 18, 2010 ClosedSteering Wander or DriftPE10008

On February 18, 2010, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE10-008 to investigate complaints of steering wander or drift in model year (MY) 2009 and 2010 Toyota Corolla and Matrix vehicles.The complaint descriptions indicated dissatisfaction with the on-center steering feel in the subject vehicles. Some drivers (~25%) related the feel to driving in a strong crosswind and others indicated that the effort and attention required to maintain heading increased driver fatigue on long trips.These complaints all relate to the system operating as designed and do not involve failure of any steering system components.The subject vehicles are equipped with an electronic power steering system that was introduced in the MY 2009 vehicles.The power assist, including on-center steering feel, is controlled electronically and is part of the system calibration.Toyota responded to steering feel concerns from some customers by issuing a technical service bulletin (TSB-0140-10 STEERING ON-CENTER FEEL) that released an optional EPS electronic control unit that has a re-calibrated on-center feel.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency will continue to monitor complaints and other information relating to the alleged defect in the subject vehicles and take further action in the future if warranted by the circumstances.For further details see the attached VRTC and ODI Closing Reports.

Recorded closure: May 4, 2011

Find investigation PE10008

Your next step

Take good questions
to the inspection.

Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.