The vehicle dossier US · 2004
2004 Toyota
CAMRY SOLARAProblems & recalls
161 distinct owner reports in the NHTSA snapshot. Other components appears in 58 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 161 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
53,000 miles is the median among 118 reports with usable mileage. The middle half spans 9,400–85,100 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
1 recall campaign on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
ENGINE AND ENGINE COOLINGCampaign 11V539000
Reported concern
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004 AVALON VEHICLES; 2004 AND 2005 CAMRY, CAMRY SOLARA, HIGHLANDER, AND SIENNA VEHICLES, 2006 HIGHLANDER HYBRID; 2004 AND 2005 LEXUS ES330 AND RX330; AND 2006 LEXUS RX400H VEHICLES MANUFACTURED FROM JUNE 1, 2004 THROUGH MARCH 31, 2005, EQUIPPED WITH THE 1MZ-FE OR 3MZ-FE ENGINE. THE AMOUNT OF ADHESIVE AGENT APPLIED BETWEEN THE OUTER RING AND THE TORSIONAL RUBBER DAMPER (INNER RING) IN THE CRANKSHAFT PULLEY MAY BE INADEQUATE. IF THE ADHESIVE IS INSUFFICIENT, THERE IS A POSSIBILITY THAT THE OUTER RING MAY BECOME MISALIGNED AND IT MAY NOT PROPERLY ROTATE WITH THE INNER RING, CAUSING NOISE AND/OR ILLUMINATION OF THE BATTERY DISCHARGE INDICATOR LIGHT.
Manufacturer’s stated response
TOYOTA WILL NOTIFY OWNERS, AND DEALERS WILL CHECK THE CRANKSHAFT PULLEY TO IDENTIFY WHETHER IT WAS PRODUCED BY THE U.S. SUPPLIER. IF SO, THE DEALER WILL REPLACE THE PULLEY WITH A NEW ONE AT NO CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING EARLY JANUARY 2012. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Read campaign 11V539000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
173 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
T-SB-0039-24 Rev2The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11012744
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11012744 at NHTSAT-SB-0038-24 Rev2To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11012743
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11012743 at NHTSAT-SB-0035-24 Rev2Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas suc…NHTSA ID 11012742
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11012742 at NHTSAT-SB-0061-23 Rev2Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Remova…NHTSA ID 11012735
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
Campaign / software reference: T-SB-0061-23 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11012735 at NHTSAT-SB-0039-24 Rev1The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11007445
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11007445 at NHTSAT-SB-0038-24 Rev1To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11007444
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11007444 at NHTSAT-SB-0035-24 Rev1Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas suc…NHTSA ID 11007443
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11007443 at NHTSAT-SB-0039-24 Rev1The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11006151
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11006151 at NHTSAT-SB-0038-24 Rev1To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11006150
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11006150 at NHTSAT-SB-0035-24 Rev1Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas suc…NHTSA ID 11006149
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11006149 at NHTSAT-SB-0061-23 Rev1Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.NHTSA ID 11005153
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
Campaign / software reference: T-SB-0061-23 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11005153 at NHTSAT-SB-0039-24The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11003649
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11003649 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
ENGINE SURGINGDP06003
THE PETITIONER OWNS A MY 2006 TOYOTA CAMRY WITH A 4-CYLINDER ENGINE THAT WAS PURCHASED NEW IN JANUARY 2006. THE PETITIONER ALSO PREVIOUSLY OWNED A MY 2005 CAMRY. HE ALLEGES THAT BOTH VEHICLES EXHIBITED VEHICLE ENGINE SURGING, WHICH HE DESCRIBED AS A SHORT DURATION (1 TO 2 SECOND) INCREASE IN ENGINE SPEED OCCURRING WHILE THE ACCELERATOR PEDAL IS NOT DEPRESSED. IN AN INITIAL INTERVIEW, THE PETITIONER ESTIMATED THAT 6 TO 8 SURGE INCIDENTS, OF VARYING SEVERITY, OCCURRED IN THE MY 2006 VEHICLE OVER THE COURSE OF 10,000 MILES AND 7 MONTHS OF OWNERSHIP. THE PETITIONER REPORTS THAT THE BRAKE SYSTEM IS EFFECTIVE AT OVERCOMING THE SURGE. HOWEVER, HE IS CONCERNED ABOUT REPORTS FILED WITH NHTSA ALLEGING UNCONTROLLEDSURGING IN MY 2002 TO 2006 CAMRY VEHICLES BRINGING THOSE VEHICLES TO A HIGH RATE OF SPEED (IN SOME CASES, PURPORTEDLY, WITH THE BRAKES APPLIED).AFTER REVIEW AND ANALYSIS OF THE AVAILABLE INFORMATION, ODI HAS NOT IDENTIFIED A VEHICLE-BASED DEFECT THAT WOULD HAVE PRODUCED THE ALLEGED ENGINE SURGE IN THE PETITIONER?S VEHICLE, NOR WAS IT ABLE TO WITNESS SUCH AN EVENT WHEN ROAD TESTING THE PETITIONER?S VEHICLE.EVALUATION OF A SUSPECT THROTTLE ACTUATOR REMOVED FROM THE PETITIONER?S VEHICLE DID NOT REVEAL A COMPONENT PROBLEM. WARRANTY AND PARTS SALES OF THE ACTUATOR ARE UNREMARKABLE.THESE DATA DO NOT SUPPORT THE EXISTENCE OF A WIDE-SPREAD DEFECT OR ONGOING CONCERN. THE FAULT DETECTION AND REACTION STRATEGY DESCRIBED IN TOYOTA?S TECHNICAL DOCUMENTS INDICATES THAT A LOSS OF THROTTLE CONTROL DUE TO A COMPONENT OR SYSTEM FAILURE WOULD BE DETECTED WITHIN A ONE SECOND PERIODAFTER WHICH ENGINE POWER WOULD BE LIMITED. THE PETITIONER?S MY 2006 VEHICLE BRAKE SYSTEM OVERCOMES FULL ENGINE POWER AT EASILY ACHIEVABLE BRAKE PEDAL FORCES. BASED ON THE ANALYSIS CONDUCTED, IT IS UNLIKELY THAT NHTSA WOULD ISSUE AN ORDER FOR THE NOTIFICATION AND REMEDY OF A SAFETY RELATED DEFECT AT THE CONCLUSION OF THE INVESTIGATION REQUESTED IN THE PETITION.CONSEQUENTLY, IN VIEW OF THE NEED TO ALLOCATE AND PRIORITIZE NHTSA?S LIMITED RESOURCES TO BEST ACCOMPLISH THE AGENCY?S SAFETY MISSION, THE PETITION IS DENIED.PLEASE SEE THE MARCH 9, 2007 FEDERAL REGISTER NOTICE FOR FURTHER DETAILS.
Recorded closure: Apr 3, 2007
Find investigation DP06003VEHICLE SPEED CONTROLDP05002
IN A LETTER DATED JULY 8, 2005, AND AFTER EXPERIENCING TWO INCIDENTS (AND ONE CRASH) WHERE HE ALLEGES HIS MODEL YEAR (MY) 2002 CAMRY ACCELERATED WITHOUT DRIVER INPUT, MR. JORDAN ZIPRIN PETITIONED THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION?S (NHTSA) OFFICE OF DEFECTS INVESTIGATION (ODI) TO COMMENCE A PROCEEDING TO DETERMINE THE EXISTENCE OF A DEFECT WITHIN THE ETC SYSTEM IN MY 2002 TO 2005 TOYOTA AND LEXUS VEHICLES, OR TO REOPEN A PRIOR INVESTIGATION PRELIMINARY EVALUATION (PE) 04-021.IN A LETTER DATED AUGUST 18, 2005, MR. ZIPRIN AMENDED HIS PETITION TO INCLUDE ALLEGATIONS OF INTERRELATED BRAKE AND ACCELERATION PROBLEMS THAT ALLEGEDLY RESULT IN INAPPROPRIATE AND UNCONTROLLABLE VEHICLE ACCELERATIONS.THE 1172 VEHICLE OWNER QUESTIONNAIRE REPORTS CITED BY THE PETITIONER INVOLVE 4 LEXUS AND 15 TOYOTA MODELS DEFINING A POPULATION OF 7 MILLION VEHICLES.THE REPORTS TYPICALLY ALLEGED A DEFECT IN THE BRAKE SYSTEM, THE THROTTLE CONTROL SYSTEM, OR A COMBINATION OF BOTH SYSTEMS.IN ITS REVIEW OF THE REPORTS, ODI A) FAILED TO FIND EVIDENCE TO SUPPORT THE EXISTENCE OF A BRAKE RELATED DEFECT IN THE CITED MODELS, AND B) DETERMINED THAT MANY CITED PRODUCTS WERE NOT EQUIPPED WITH ETC.ACCORDINGLY, ODI RESTRICTED ITS ANALYSIS TO THE 432 PETITIONER REPORTS INVOLVING MY 2002 TO 2005 CAMRY, SOLARA, AND ES MODELS (ALL EQUIPPED WITH ETC) THAT ALLEGED AN ABNORMAL THROTTLE CONTROL EVENT (SEE THE JANUARY 3, 2006 FEDERAL REGISTER NOTICE FOR FURTHER DETAILS).ABOUT 40% OF THE 432 REPORTS INVOLVE A DRIVEABILITY CONCERN WHERE THE OPERATOR INTENTIONALLY APPLIES THE THROTTLE PEDAL, IN EXPECTATION THAT THE VEHICLE WILL ACCELERATE, AND THEN EXPERIENCES A DELAY OR HESITATION IN VEHICLE RESPONSE.THESE REPORTS INVOLVE VEHICLE RESPONSE TO INTENTIONAL DRIVER COMMANDS WHICH ODI CONSIDERS UNRELATED TO THE ALLEGATIONS RAISED BY THE PETITIONER.THEREFORE, THE REPORTS DO NOT PROVIDE SUPPORT FOR THE INVESTIGATION REQUESTED.ABOUT 20% OF THE REPORTS INVOLVE INCIDENTS WHERE OPERATORS ALLEGE VEHICLE ACCELERATION WITHOUT DRIVER INPUT AND AN INABILITY OF THE BRAKE SYSTEM TO CONTROL THE VEHICLE WHEN APPLIED.NEITHER THE REPORTS, NOR THE INTERVIEWS CONDUCTED BY ODI, IDENTIFIED ANY VEHICLE-BASED CAUSE TO EXPLAIN THE INCIDENTS OR DISCLOSED EVIDENCE TO SUPPORT THAT A FAILURE OF THE BRAKE OR THROTTLE CONTROL SYSTEM HAD OCCURRED.BECAUSE THESE REPORTS DO NOT INDICATE A DISTINCT SAFETY DEFECT FOR INVESTIGATION, THE REPORTS DO NOT PROVIDE SUPPORT FOR THE INVESTIGATION REQUESTED BY THE PETITIONERTHE REMAINING REPORTS (~ 40%, SIMILAR TO THE PETITIONER?S AND THOSE OF PE04-021) TYPICALLY DESCRIBE INCIDENTS WHERE A VEHICLE IS BEING MANEUVERED AT SLOW SPEED IN A CLOSE QUARTER SITUATION AT WHICH POINT THE OPERATOR ALLEGES THAT THE VEHICLE ACCELERATES WITHOUT DRIVER INPUT AND CRASHES.IN THE AFTERMATH, OPERATORS ARE UNSURE OF WHETHER THE BRAKES WERE APPLIED OR NOT, SOMETIMES STATING THERE WAS INSUFFICIENT TIME TO USE THE BRAKE; A CRASH OCCURRED AND THE OPERATOR BELIEVES AN UNCOMMANDED ACCELERATION CAUSED IT.IN SPITE OF THE EFFORT EXPENDED DURING PE04-021 AND DURING THIS ANALYSIS, ODI HAS NOT IDENTIFIED ANY VEHICLE-BASED CAUSE TO EXPLAIN THE REPORTS, OR UNCOVERED ANY EVIDENCE TO INDICATE THAT A THROTTLE CONTROL SYSTEM FAILURE OCCURRED.THEREFORE, THE REPORTS HAVE AMBIGUOUS SIGNIFICANCE AND DO NOT CONSTITUTE A BASIS ON WHICH ANY FURTHER INVESTIGATIVE ACTION IS WARRANTED.BASED ON THE ANALYSIS CONDUCTED, IT IS UNLIKELY THAT THE NHTSA WOULD ISSUE AN ORDER FOR THE NOTIFICATION AND REMEDY OF A SAFETY RELATED DEFECT AT THE CONCLUSION OF THE INVESTIGATION REQUESTED IN THE PETITION.CONSEQUENTLY, IN VIEW OF THE NEED TO ALLOCATE AND PRIORITIZE NHTSA?S LIMITED RESOURCES T
Recorded closure: Jan 5, 2006
Find investigation DP05002Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.