159 distinct owner reports in the NHTSA snapshot. Other components appears in 56 of them. Explore what was reported—and which official actions are on file.
These reviewed documents are associated with this model-year. Check the stated engine, build-date, VIN and coverage conditions before assuming they apply to the car you’re considering.
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 12 years with reports.
2
14
46
15
18
16
11
17
13
18
11
19
10
20
19
21
12
22
7
23
7
24
3
26
Year filed (last two digits)Latest report: Mar 10, 2026
Mileage, where supplied
16,070 miles is the median among 104 reports with usable mileage. The middle half spans 2,500–41,600 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
3 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
Apr 27, 2016 Safety recallELECTRONIC STABILITY CONTROL (ESC)Campaign 16V251000
Reported concern
Subaru of America, Inc. (Subaru) is recalling certain model year 2015 Legacy and Outback vehicles manufactured on July 20, 2015. The brake fluid used in these vehicles may contain excess moisture which may adversely affect the performance of the electronic stability control system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control Systems."
Manufacturer’s stated response
Subaru will notify owners, and dealers will perform an ABS activation, then flush and replace the brake fluid, free of charge. The recall began on May 20, 2016. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WTC-64.
Aug 10, 2015 Safety recallPOWER TRAIN:DRIVELINE:DRIVESHAFTCampaign 15V502000
Reported concern
Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.
Manufacturer’s stated response
Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
Subaru of America, Inc. (Subaru) is recalling certain model year 2015 Legacy vehicles manufactured March 10, 2014, to April 16, 2015, Outback vehicles manufactured February 24, 2014, to April 16, 2015, Impreza vehicles manufactured September 9, 2014, to April 14, 2015, XV Crosstrek vehicles manufactured October 16, 2014, to April 15, 2015, and 2016 WRX vehicles manufactured March 23, 2015, and equipped with the Eyesight Driver Assist System. If the switch that activates the brake lights fails, the automatic pre-collision braking component of the driver assist system will not function.
Manufacturer’s stated response
Subaru will notify owners, and dealers will reprogram the driver assist system, free of charge. The recall began on July 20, 2015. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WQS-54.
521 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
Aug 20, 2026 Service Bulletin/Repair Instructions16-156-25RThis bulletin announces a design change made to the CVT Control Valve Body. The updated valve body incorporates an enhanced valve sleeve to improve durability. This is an revised version of the original bulletin.NHTSA ID 11036810
This bulletin announces a design change made to the CVT Control Valve Body. The updated valve body incorporates an enhanced valve sleeve to improve durability. This is an revised version of the original bulletin.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Aug 20, 2026 Service Bulletin/Repair Instructions15-308-23RThis Service Information Bulletin outlines a systematic procedure for diagnosing parasitic draw (dark/standby current) in vehicles experiencing battery drain when the ignition is off, leading to no-start conditions or frequent …NHTSA ID 11036807
This Service Information Bulletin outlines a systematic procedure for diagnosing parasitic draw (dark/standby current) in vehicles experiencing battery drain when the ignition is off, leading to no-start conditions or frequent jump-starts.This is an revised version of the original bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Aug 13, 2026 Service Bulletin/Repair Instructions15-304-22RThis Bulletin has been developed to outline the steps for gathering basic but essential information during diagnosis of Infotainment concerns. (This is an revised version of the original bulletin.)NHTSA ID 11036796
This Bulletin has been developed to outline the steps for gathering basic but essential information during diagnosis of Infotainment concerns. (This is an revised version of the original bulletin.)
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Aug 1, 2026 Service Bulletin/Repair Instructions15-333-25RThis bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. This is an revised version of the original bulletinNHTSA ID 11036789
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. This is an revised version of the original bulletin
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Jun 12, 2026 OtherSubaruNet Annoucement (EThis announcement is requesting retailer staff to retain the EyeSight protective hood covers from Generation 4 EyeSight cameras.NHTSA ID 11034249
This announcement is requesting retailer staff to retain the EyeSight protective hood covers from Generation 4 EyeSight cameras.
Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.
Jun 2, 2026 Service Bulletin/Repair Instructions16-156-25RThis bulletin announces a design change made to the CVT Control Valve Body which incorporates an enhanced valve sleeve to improve durability. (This is an revised version of the orignal bulletin.)NHTSA ID 11034242
This bulletin announces a design change made to the CVT Control Valve Body which incorporates an enhanced valve sleeve to improve durability. (This is an revised version of the orignal bulletin.)
Components: ELECTRICAL SYSTEM · POWER TRAIN. Confirm detailed applicability in the original document.
Jun 1, 2026 Service Bulletin/Repair Instructions02-195-26This bulletin announces the availability of reprogramming files for the Engine Control Module (ECM) for certain vehicles equipped with 3.6L engines.NHTSA ID 11034240
This bulletin announces the availability of reprogramming files for the Engine Control Module (ECM) for certain vehicles equipped with 3.6L engines.
Components: ELECTRICAL SYSTEM · ENGINE. Confirm detailed applicability in the original document.
May 18, 2026 Service Bulletin/Repair Instructions01-167-08RThis bulletin contains additional information for recommended materials listed in the Service Manuals for individual models.NHTSA ID 11033069
This bulletin contains additional information for recommended materials listed in the Service Manuals for individual models.
Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.
May 13, 2026 Service Bulletin/Repair Instructions16-156-25RThis bulletin announces a design change made to the CVT Control Valve Body which incorporates an enhanced valve sleeve to improve durability.NHTSA ID 11033063
This bulletin announces a design change made to the CVT Control Valve Body which incorporates an enhanced valve sleeve to improve durability.
Components: ELECTRICAL SYSTEM · POWER TRAIN. Confirm detailed applicability in the original document.
Apr 30, 2026 Service Bulletin/Repair Instructions07-240-26RThis Service Information Bulletin was developed to provide interim guidance for vehicles exhibiting DTC B2A20.NHTSA ID 11032034
This Service Information Bulletin was developed to provide interim guidance for vehicles exhibiting DTC B2A20.
Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.
Records below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Opened Sep 17, 2021 No close date recordedDesiccated Air Bag Inflator RuptureEA21002
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.