The vehicle dossier US · 2002
2002 Saab
9-5Problems & recalls
53 distinct owner reports in the NHTSA snapshot. Electrical system appears in 27 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 53 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 12 years with reports.
54,000 miles is the median among 43 reports with usable mileage. The middle half spans 35,000–72,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
6 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
SEATS:FRONT ASSEMBLY:HEAD RESTRAINTCampaign 08V160000
Reported concern
SAAB IS RECALLING 57,389 MY 2002-2008 9-5 SERIES VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." DURING COMPLIANCE TESTING, ONE OF THE UPPER INTERIOR OCCUPANT PROTECTION TEST POINTS EXCEEDED THE STANDARD'S REQUIREMENTS.
Manufacturer’s stated response
DEALERS WILL INSTALL A-PILLAR TRIM WITH IMPROVED ENERGY-ABSORBING CAPABILITY FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 25, 2008. OWNERS MAY CONTACT SAAB AT 1-800-955-9007.
Manufacturer campaign: E080101/15204
Read campaign 08V160000 at NHTSAFUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGSCampaign 07V087000
Reported concern
ON CERTAIN PASSENGER VEHICLES, THE FUEL PUMP RETAINING TABS HOLDING THE FUEL LINES WERE DAMAGED DURING PRODUCTION.
Manufacturer’s stated response
DEALERS WILL DEVELOP A SECURING BRACKET THAT WILL SECURE THE FUEL LINES TO THE FUEL PUMP EVEN IF THE PLASTIC RETAINING TABS SHOULD BREAK. THE RECALL BEGAN ON JUNE 13, 2007. THIS IS AN EXPANSION OF PREVIOUS RECALL CAMPAIGNS - SEE 04V557 AND 06V126. OWNERS MAY CONTACT SAAB AT 1-800-955-9007.
Manufacturer campaign: 07052
Read campaign 07V087000 at NHTSAELECTRICAL SYSTEM:IGNITION:MODULECampaign 06V410000
Reported concern
CERTAIN PASSENGER VEHICLES EQUIPPED WITH B308 6-CYLINDER GASOLINE ENGINES MAY EXPERIENCE OVERHEATING AND BURNOUT OF THE ISOLATED GATED BIPOLAR TRANSISTOR (IGBT) WITHIN THE IGNITION DISCHARGE MODULE (IDM) DUE TO INCREASED SUSCEPTIBILITY TO ELECTRICAL LOADS.
Manufacturer’s stated response
DEALERS WILL INSPECT TO SEE WHAT VERSION IDM IS IN THE VEHICLE AND REPLACE THE IDM IF IT IS A VERSION BUILT PRIOR TO JANUARY 2003. THE RECALL IS EXPECTED TO BEGIN DURING DECEMBER 2005. OWNERS MAY CONTACT SAAB AT 1-800-955-9007. NOTE: THIS RECALL IS AN EXPANSION OF A PREVIOUS CAMPAIGN (PLEASE SEE 05V399).
Manufacturer campaign: 05087/15021B
Read campaign 06V410000 at NHTSAELECTRICAL SYSTEM:IGNITION:MODULECampaign 05V399000
Reported concern
CERTAIN PASSENGER VEHICLES EQUIPPED WITH B205/B235 4-CYLINDER GASOLINE ENGINES AND B308 6-CYLINDER GASOLINE ENGINES MAY EXPERIENCE OVERHEATING AND BURNOUT OF THE ISOLATED GATED BIPOLAR TRANSISTOR (IGBT) WITHIN THE IGNITION DISCHARGE MODULE (IDM) DUE TO INCREASED SUSCEPTIBILITY TO ELECTRICAL LOADS.
Manufacturer’s stated response
DEALERS WILL INSPECT TO SEE WHAT VERSION IDM IS IN THE VEHICLE AND REPLACE THE IDM IF IT IS A VERSION BUILT PRIOR TO THE INTRODUCTION OF QP3. AN INTERIM LETTER WILL BE MAILED TO OWNERS IN OCTOBER 2005, INFORMING THEM OF THE CONDITION. PARTS ARE NOW AVAILABLE AND OWNERS WILL BE NOTIFIED TO BRING THEIR VEHICLES IN TO THE DEALERS TO HAVE THE IDM REPLACED BY LETTER DATED MARCH 13, 2006. OWNERS MAY CONTACT SAAB AT 1-800-955-9007.
Manufacturer campaign: 15021
Read campaign 05V399000 at NHTSAWHEELS:HUBCampaign 03V006000
Reported concern
ON CERTAIN PASSENGER VEHICLES, IF AN OWNER CHANGES THEIR WHEELS/TIRES BETWEEN SUMMER AND WINTER USING A STEEL WHEEL IN THE WINTER AND AN ALLOY WHEEL IN THE SUMMER, IT IS POSSIBLE FOR RUST AND CONTAMINATION TO BUILD UP ON THE WHEEL HUB DURING THE STEEL WHEEL USAGE. IF THIS OCCURS AND THE CONTAMINATION IS NOT REMOVED, IT IS POSSIBLE THAT AFTER THE TIRE CHANGE SERVICE, SOME OF THIS CONTAMINATION COULD FLAKE OR GRIND AWAY RESULTING IN REDUCED CLAMPING FORCE OF THE WHEEL TO THE HUB. OVER SEVERAL SEASONS, IT IS POSSIBLE THAT THIS REDUCED FORCE COULD RESULT IN FRACTURES DEVELOPING IN THE WHEEL BOLTS DUE TO WHEEL TO HUB MOVEMENT.
Manufacturer’s stated response
OWNERS WILL BE CONTACTED BY MAIL AND ASKED WHETHER THEY CHANGE BETWEEN STEEL AND ALLOY WHEELS. IF THEY DO ENGAGE IN THIS PRACTICE, THEY WILL BE INSTRUCTED TO BRING THEIR CARS TO AN AUTHORIZED DEALER. THE DEALER WILL REMOVE THE WHEELS, CLEAN ANY CONTAMINATION FROM THE WHEEL AND WHEEL HUB, AND REPLACE THE WHEELS USING NEW IMPROVED BOLTS WITH ATTACHED WASHERS. OWNER NOTIFICATION BEGAN MARCH 31, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT SAAB AT 1-800-955-9007.
Manufacturer campaign: 15013
Read campaign 03V006000 at NHTSASTEERING:LINKAGES:KNUCKLE:SPINDLE:ARMCampaign 02V006000
Reported concern
THE STEERING KNUCKLE CASTINGS ON CERTAIN PASSENGER VEHICLES MAY HAVE BEEN CONTAMINATED DURING THE CASTING PROCESS.
Manufacturer’s stated response
DEALERS WILL INSPECT THE STEERING KNUCKLE FOR THE CASTING NUMBER. IF THE KNUCKLE WAS IN THE DEFECTIVE BATCH, THE STEERING KNUCKLE WILL BE REPLACED. OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING JANUARY 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT SAAB AT 1-800-955-9007.
Read campaign 02V006000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
63 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
PIP5601CThis PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.NHTSA ID 11020816
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.
Source record 11020816 at NHTSAGeneral CommunicationVehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updatin…NHTSA ID 11006621
Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
Campaign / software reference: General Communication
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11006621 at NHTSA16-NA-383This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier…NHTSA ID 11004761
This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
Components: ENGINE · FUEL/PROPULSION SYSTEM. Confirm detailed applicability in the original document.
Source record 11004761 at NHTSA18-NA-099This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.NHTSA ID 11004557
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.
Source record 11004557 at NHTSA24-NA-098This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution info…NHTSA ID 11002312
This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11002312 at NHTSA10-08-45-001HThis bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.NHTSA ID 10252735
This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10252735 at NHTSA16-NA-383This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Ti…NHTSA ID 10251890
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10251890 at NHTSA22-NA-074This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.NHTSA ID 10250775
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10250775 at NHTSAPI1394BThis PI bulletin advises the technician on the proper way to install the pistons in an engine.NHTSA ID 10249579
This PI bulletin advises the technician on the proper way to install the pistons in an engine.
Components: ENGINE AND ENGINE COOLING · POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10249579 at NHTSA02-08-42-001JThis informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.NHTSA ID 10249011
This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
Components: EXTERIOR LIGHTING. Confirm detailed applicability in the original document.
Source record 10249011 at NHTSA17-NA-170This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.NHTSA ID 10244274
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
Components: WHEELS. Confirm detailed applicability in the original document.
Source record 10244274 at NHTSA10-00-89-006JThis service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).NHTSA ID 10244201
This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Confirm detailed applicability in the original document.
Source record 10244201 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
ENGINE STALL/ ENGINE COMPARTMENT FIRESPE05017
ODI OPENED PE05-017 BASED ON 35 REPORTS OF ALLEGED ENGINE STALLING DUE TO THE FAILURE OF THE IDM CASSETTE ON THE SUBJECT VEHICLES.ALL COMPLAINANTS REPORTED THAT THE ENGINE SHUT DOWN SUDDENLY WITHOUT WARNING AND MOST REPORTED THAT THE VEHICLE WOULD NOT RESTART.IN 3 INCIDENTS, THE COMPLAINANTS REPORTED SMOKE AND/OR FIRE RESULTED FROM THE IDM FAILURE.DURING PE05-017, ADDITIONAL FAILURE DATA WAS IDENTIFIED AS NOTED IN THE FAILURE REPORT SUMMARY ABOVE.THE COMPLAINT DATA REPRESENTS INCIDENTS WHERE THE COMPLAINANTS ALLEGED A STALL OR FIRE.ON SEPTEMBER 13, 2005, GENERAL MOTORS (GM) NOTIFIED NHTSA OF A SAFETY DEFECT ON 95,081 MY 2000-2002 SAAB 9-3 AND 9-5 VEHICLES WITH 4-CYLINDER GASOLINE ENGINES AND 8,117 MY 2001 9-5 VEHICLES WITH 6- CYLINDER GASOLINE ENGINES (RECALL 05V-399).THE NOTIFICATION STATED THAT CERTAIN VEHICLES WITHIN THESE POPULATIONS MAY EXPERIENCE OVERHEATING AND BURNOUT OF THE ISOLATED GATED BIPOLAR TRANSISTOR (IGBT) WITHIN THE IDM DUE TO INCREASED SUSCEPTIBILITY TO ELECTRICAL LOADS.OVERHEATING OF THE IGBT OCCURS MOST OFTEN AT ENGINE START-UP FOR BOTH A 4-CYLINDER AND 6-CYLINDER ENGINE, BUT IT MAY ALSO OCCUR WHILE THE ENGINE IS RUNNING.WHEN THE IDM FAILS ON A 4-CYLINDER WHILE IT IS RUNNING, THE ENGINE MAY STALL WITHOUT WARNING, WITH NO ABILITY TO BE RESTARTED.WHEN THE IDM FAILS ON A 6-CYLINDER ENGINE WHILE IT IS RUNNING, THE DRIVER WILL INITIALLY EXPERIENCE REDUCED POWER AND ROUGH OPERATION BECAUSE THE ENGINE WILL ONLY BE RUNNING ON THREE CYLINDERS.THE CHECK ENGINE LIGHT WILL FLASH.IF THE DRIVER CONTINUES, UNBURNT FUEL IN THE EXHAUST CAN CAUSE THERMAL DAMAGE TO THE CATALYTIC CONVERTER.THE ENGINE MAY STALL AND NOT RESTART.THERMAL DAMAGE TO OTHER UNDERHOOD COMPONENTS AND THE UNDERBODY MAY ALSO RESULT FROM PROLONGED DRIVING.THE RECALL POPULATION ENCOMPASSES 84% OF THE STALLING AND FIRE COMPLAINTS (215 FOR VEHICLES WITH 4-CYLINDER ENGINES AND 36 FOR VEHICLES WITH 6-CYLINDER ENGINES).THE 36 MONTHS IN SERVICE (MIS) STALLING RATES FOR EACH MODEL YEAR OF RECALLED VEHICLES WITH 4-CYLINDER ENGINES WERE ALL GREATER THAN TWO PERCENT.ALTHOUGH THE 36 MIS STALL RATE FOR THE RECALLED MY 2001 VEHICLES WITH V6 ENGINES WAS LOWER, AT 1.3 PERCENT, THESE VEHICLES ALSO HAD THE HIGHEST RATE OF CONFIRMED (OPEN FLAME VERIFIED) FIRES AT 62 PER 100,000 VEHICLES.GM WILL INSTRUCT OWNERS TO BRING THEIR VEHICLES TO A DEALER FOR IDM INSPECTION AND REPLACEMENT, IF NECESSARY.CONSEQUENTLY, THIS INVESTIGATION IS CLOSED.ODI WILL MONITOR THE EFFECTIVENESS OF THE SCOPE AND REMEDY OF GM'S ACTION AND TAKE FURTHER ACTION IF WARRANTED.
Recorded closure: Sep 23, 2005
Campaign reference in the source: 06V410000
Find investigation PE05017Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.