The vehicle dossier US · 2000
2000 Oldsmobile
SILHOUETTEProblems & recalls
114 distinct owner reports in the NHTSA snapshot. Other components appears in 40 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 114 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 14 years with reports.
56,500 miles is the median among 50 reports with usable mileage. The middle half spans 40,000–72,908 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
8 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
STEERINGCampaign 09E005000
Reported concern
DORMAN IS RECALLING 979 STEERING KNUCKLES, DORMAN P/NOS. 697-902 AND 697-903, SOLD UNDER DORMAN'S "OE SOLUTIONS<SUP>TM</SUP>" BRAND NAME, AND NAPA P/NOS. 7-8502 AND 7-8503 WHICH WERE SOLD FOR REPLACEMENT USE ON THE VARIOUS VEHICLES LISTED ABOVE. A POTENTIAL MATERIAL OR DESIGN DEFECT COULD RESULT IN THE STEERING KNUCKLE BREAKING IN THE HUB AREA.
Manufacturer’s stated response
DORMAN WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE STEERING KNUCKLES FREE OF CHARGE AND REIMBURSE THE REPAIR FACILITY OR OWNER FOR LABOR. THE RECALL BEGAN ON FEBRUARY 23, 2009. OWNERS MAY CONTACT DORMAN'S TOLL-FREE HOTLINE AT 1-800-523-2492 AND PRESS 5.
Read campaign 09E005000 at NHTSAEXTERIOR LIGHTING:HEADLIGHTSCampaign 08E050000
Reported concern
K2 MOTOR IS RECALLING 1,921 AFTERMARKET HEADLAMPS OF VARIOUS MODELS SOLD FOR USE ON THE ABOVE LISTED VEHICLES. THESE HEADLAMPS ARE MISSING THE AMBER SIDE REFLEX REFLECTOR WHICH FAILS TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
Manufacturer’s stated response
K2 MOTOR WILL NOTIFY OWNERS AND OFFER A FULL REFUND. THE RECALL BEGAN ON DECEMEBER 17, 2008. OWNERS MAY CONTACT K2 MOTOR AT 1-909-839-2992.
Read campaign 08E050000 at NHTSAFUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICESCampaign 07E021000
Reported concern
CERTAIN DELPHI FUEL PRESSURE REGULATORS, P/NOS. FP10020-11B1, FP10026-11B1, AND FP10027-11B1, SOLD AFTER JANUARY 9, 2007, AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE UNIVERSAL PRESSURE REGULATORS (UPR) WERE PRODUCED WITHOUT AN O'RING AND RETAINER.
Manufacturer’s stated response
DELPHI WILL NOTIFY OWNERS AND REPLACE THE UPR FREE OF CHARGE. THE RECALL BEGAN ON APRIL 23, 2007. OWNERS CAN CONTACT DELPHI AT 877-411-8770.
Read campaign 07E021000 at NHTSALATCHES/LOCKS/LINKAGES:DOORS:LATCHCampaign 04V597000
Reported concern
ON CERTAIN MINIVANS EQUIPPED WITH SECOND-ROW BUCKET SEATS OR CAPTAIN'S CHAIRS AND A POWER SLIDING DOOR ON THE PASSENGER SIDE OF THE VEHICLE, A PASSENGER USING THE INTERIOR HANDLE TO OPEN THE POWER SLIDING DOOR COULD BE INJURED.
Manufacturer’s stated response
DEALERS WILL REPLACE THE POWER SLIDING DOOR INTERIOR HANDLE ON THE PASSENGER-SIDE. IF THE VEHICLE IS EQUIPPED WITH A POWER OR MANUAL SLIDING DOOR ON THE DRIVER-SIDE, THE INTERIOR HANDLE WILL ALSO BE REPLACED FOR APPEARANCE REASONS. NOTE: BEFORE THE VEHICLE IS SERVICED, GM ADVISES OWNERS TO NOT USE THE INTERIOR DOOR HANDLE TO OPEN THE DOOR. THE DRIVER CAN OPEN AND CLOSE THE DOOR FROM SWITCHES AT THE DRIVER'S POSITION OR BY USING THE REMOTE KEY FOB. THE DRIVER SHOULD TELL PASSENGERS TO USE THE SWITCH LOCATED IN FRONT OF THE DOOR TO OPEN OR CLOSE IT. THE DRIVER SHOULD USE THE OVERRIDE SWITCH TO PREVENT OPERATION OF THE POWER DOOR BY CHILDREN OR BY OTHERS WHO ARE NOT FAMILIAR WITH ITS USE. THE OWNER NOTIFICATION LETTER MAILING WILL BE CONDUCTED IN PHASES WITH THE FIRST PHASE BEGINNING ON MAY 31, 2005. THE SECOND PHASE MAILING BEGAN ON JULY 18, 2005. THE RECALL BEGAN ON MAY 31, 2005. PHASE 2 BEGAN ON JULY 18, 2005. PHASE 3 (FINAL PHASE) BEGAN ON AUGUST 24, 2005, TO ALL REMAINING CUSTOMERS. OWNERS SHOULD CONTACT CHEVROLET AT 1-800-630-2438; PONTIAC AT 1-800-620-7668; OR OLDSMOBILE AT 1-800-630-6537.
Manufacturer campaign: 04110
Read campaign 04V597000 at NHTSALATCHES/LOCKS/LINKAGES:DOORS:LATCHCampaign 01V264000
Reported concern
VEHICLE DESCRIPTION: 1997-2001 CHEVROLET VENTURE, PONTIAC MONTANA/TRANSPORT, AND OLDSMOBILE SILHOUETTE MINI VANS EQUIPPED WITH PASSENGER SIDE POWER SLIDING DOORS THAT WERE SERVICED IN CAMPAIGN 01013 (01V-067) FROM APRIL TO AUGUST 2001. ALSO 2001 CHEVROLET VENTURE, PONTIAC MONTANA, AND OLDSMOBILE SILHOUETTE MINI VANS EQUIPPED WITH PASSENGER SIDE POWER SLIDING DOORS ASSEMBLED IN JANUARY THROUGH APRIL 2001. THESE VEHICLES HAVE INADEQUATE FRONT WELDS. IF A FRONT WELD FAILS, THE ACTUATOR CAN JAM IN THE UNLATCHED POSITION AND, WHEN THE SLIDING DOOR CLOSES, IT WILL NOT BE LATCHED.
Manufacturer’s stated response
DEALERS WILL INSPECT AND, IF REQUIRED, INSTALL A NEW POWER SLIDING DOOR UNLATCH ACTUATOR ASSEMBLY. OWNER NOTIFICATION BEGAN ON OCTOBER 22, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020, PONTIAC AT 1-800-762-2737, OR OLDSMOBILE AT 1-800-442-6537.
Manufacturer campaign: 01059
Read campaign 01V264000 at NHTSALATCHES/LOCKS/LINKAGES:DOORS:LATCHCampaign 01V067000
Reported concern
VEHICLE DESCRIPTION: MINIVANS EQUIPPED WITH PASSENGER SIDE POWER SLIDING DOORS. THE DOOR CLOSES BUT MAY NOT BE LATCHED. IF THIS HAPPENS, THE POWER SLIDING DOOR CAN OPEN WHILE THE VEHICLE IS IN MOTION, PARTICULARLY WHEN THE VEHICLE ASCENDS A HILL, MAKES A TURN, OR TRAVELS OVER A ROUGH ROAD SURFACE.
Manufacturer’s stated response
DEALERS WILL INSTALL A NEW UN-LATCH ACTUATOR ASSEMBLY TO THE POWER SLIDING DOOR. THIS RECALL HAS BEEN CONTINUED UNDER SAFETY RECALL 01V-264. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020, PONTIAC AT 1-800-762-2737, OR OLDSMOBILE AT 1-800-442-6537.
Manufacturer campaign: 01013
Read campaign 01V067000 at NHTSASEAT BELTSCampaign 00V228003
Reported concern
VEHICLE DESCRIPTION: PASSENGER VEHICLES, LIGHT DUTY TRUCKS, SPORT UTILITY VEHICLES, AND MINI VANS EQUIPPED WITH TRW SEAT BELT BUCKLE ASSEMBLIES. THE BUCKLE BASE OF THESE SEAT BELT ASSEMBLIES WERE NOT PROPERLY HEAT TREATED AND THEREFORE DO NOT PASS THE LOAD BEARING REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES."
Manufacturer’s stated response
DEALERS WILL INSPECT THE VEHICLE'S SAFETY BELT BUCKLE ASSEMBLY DATE CODES AND, IF NECESSARY, WILL REPLACE ANY SAFETY BELT BUCKLE ASSEMBLY.
Manufacturer campaign: 00067
Read campaign 00V228003 at NHTSAFUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGSCampaign 99V268000
Reported concern
VEHICLE DESCRIPTION: MINI VANS WITH EXTENDED WHEELBASE. SOME OF THESE VEHICLES HAVE INOPERATIVE FUEL TANK ROLLOVER VALVES AND FUEL LEAKAGE WOULD EXCEED THE PERMISSIBLE AMOUNT IN A ROLLOVER TEST. THIS DOES NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 301, "FUEL SYSTEM INTEGRITY."
Manufacturer’s stated response
DEALERS WILL INSPECT THE VEHICLES TO LOCATE AND REPLACE THOSE FUEL TANKS THAT COULD HAVE INOPERATIVE ROLLOVER VALVES.
Manufacturer campaign: 99061
Read campaign 99V268000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
292 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
PIP4723JThis Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/chargin…NHTSA ID 11009156
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11009156 at NHTSAPIT5099HThis Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will ne…NHTSA ID 11007744
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.
Source record 11007744 at NHTSAPIT5099HThis Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will ne…NHTSA ID 11007743
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.
Source record 11007743 at NHTSAGeneral CommunicationVehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updatin…NHTSA ID 11006621
Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
Campaign / software reference: General Communication
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11006621 at NHTSA16-NA-383This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier…NHTSA ID 11004761
This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
Components: ENGINE · FUEL/PROPULSION SYSTEM. Confirm detailed applicability in the original document.
Source record 11004761 at NHTSA18-NA-099This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.NHTSA ID 11004557
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.
Source record 11004557 at NHTSA24-NA-098This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution info…NHTSA ID 11002312
This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11002312 at NHTSA16-NA-383This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Ti…NHTSA ID 10251890
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10251890 at NHTSA22-NA-074This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.NHTSA ID 10250775
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10250775 at NHTSAPIP5601BThis Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Os…NHTSA ID 10249980
This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Confirm detailed applicability in the original document.
Source record 10249980 at NHTSAPI1394BThis PI bulletin advises the technician on the proper way to install the pistons in an engine.NHTSA ID 10249579
This PI bulletin advises the technician on the proper way to install the pistons in an engine.
Components: ENGINE AND ENGINE COOLING · POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10249579 at NHTSA17-NA-170This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.NHTSA ID 10244274
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
Components: WHEELS. Confirm detailed applicability in the original document.
Source record 10244274 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
POWER-SLIDING DOORPE04064
SUBJECT VEHICLES ARE AVAILABLE WITH AN OPTIONAL POWER SLIDING DOOR.THE INTERIOR HANDLE IS ORIENTED IN THE VERTICAL POSITION IN THE DOOR PANEL AND LINES UP AT THE ELBOW LEVEL WHEN THE OCCUPANT IS SEATED IN THE 2ND-ROW OUTBOARD POSITION.IF THE OCCUPANT HOLDS THE INTERIOR HANDLE IN THE THUMB UP POSITION DURING POWER-ASSISTED OPENING, THE ARM/WRIST CAN BE PUSH BACK WITH FORCE AGAINST THE 2ND-ROW BUCKET SEAT OR CAPTAIN'S CHAIR SEAT BACK CREATING A RISK OF INJURY (OTHER SEATING CONFIGURATIONS HAVE AMPLE SEAT TO DOOR CLEARANCE TO AVOID ENTRAPMENT OF THE LOWER ARM).AMONG THE 103 TOTAL REPORTS, THERE WERE 102 ALLEGED INJURIES INCLUDING ARM/WRIST, THUMB AND SHOULDER INJURIES.A COUNT OF INJURIES REVEALS THAT 76 INJURIES WERE A FRACTURED OR A BROKEN ARM/WRIST REQUIRING AN IMMOBILIZING CAST FOR FOUR-TO-SIX WEEKS.ALL INJURIES INVOLVE THE RIGHT SIDE POWER SLIDING DOOR.THE LEFT SIDE POWER SLIDING DOOR IS ON FAR FEWER VEHICLES, BUT MORE IMPORTANTLY, IT PRODUCES LESS FORCE.GM NOTIFIED THE AGENCY BY LETTER DATED DECEMBER 21, 2004, THAT IT WILL RECALL MODEL YEAR 1997 THOUGH EARLY 2005 GM U-VAN VEHICLES EQUIPPED WITH A RIGHT SIDE POWER SLIDING DOOR AND WITH 2ND-ROW BUCKET SEATS OR CAPTAIN CHAIRS (NHTSA RECALL #04V597).AS PART OF THE RECALL REMEDY, GM WILL REPLACE THE DOOR HANDLE WITH A FLUSH MOUNTED HANDLE THAT WILL PREVENT AN OCCUPANT FROM GRASPING THE HANDLE WITH THE PALM BETWEEN THE HANDLE AND DOOR PANEL (THUMB UP ORIENTATION) AND THUS ELIMINATE THE POTENTIAL FOR ARM/WRIST ENTRAPMENT.THIS INVESTIGATION IS CLOSED.
Recorded closure: Dec 22, 2004
Campaign reference in the source: 04V597000
Find investigation PE04064SHOULDER HARNESS CLIPPE02017
Recorded closure: Aug 2, 2002
Find investigation PE02017UNEXPECTED OPENING OF SLIDING DOORSQ00014
There is no summary currently available
Recorded closure: Oct 22, 2001
Campaign reference in the source: 01V067000
Find investigation SQ00014Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.