The vehicle dossier US · 2017
2017 Nissan
TITANProblems & recalls
187 distinct owner reports in the NHTSA snapshot. Engine appears in 102 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 187 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 11 years with reports.
18,450 miles is the median among 76 reports with usable mileage. The middle half spans 3,200–59,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
3 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
ELECTRICAL SYSTEM:WIRINGCampaign 19V495000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2017-2019 gasoline, light duty, Titan vehicles. The alternator harness may have been damaged during the engine installation process, possibly resulting in an electrical short.
Manufacturer’s stated response
Nissan will notify owners, and dealers will inspect the alternator harness for the proper routing and any damage. The harness will be clipped into the correct position or replaced as necessary, free of charge. The recall began August 8, 2019. Owners may contact Nissan customer service at 1-800-867-7669.
Read campaign 19V495000 at NHTSAEQUIPMENT:OTHER:LABELSCampaign 18V240000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2016-2018 Nissan Titan, 2016 and 2018 Nissan Titan XD vehicles. Accessories installed on these vehicles reduced the load carrying capacity, however, a Load Carrying Capacity modification label was not installed, possibly allowing the vehicle to be overloaded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
Manufacturer’s stated response
Nissan will notify owners and provide a new modification label, with installation instructions, free of charge. The recall began on June 4, 2018. Owners may contact Nissan customer service at 1-800-867-7669.
Read campaign 18V240000 at NHTSASEAT BELTS:REAR/OTHERCampaign 17V268000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2016-2017 Nissan Titan Crew Cab and Titan XD Crew Cab vehicles. In the event of a crash, the rear seatbelt assembly may not adequately protect the occupant's head, allowing it to contact the D-ring bolt trim cap. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 201, "Occupant Protection in Interior Impact."
Manufacturer’s stated response
Nissan will notify owners, and dealers will install energy absorbing material to the C-Pillar Finishers and replace the Seatbelt Bolt and Bolt Cap, free of charge. The recall began September 19, 2017. Owners may contact Nissan customer service at 1-800-647-7261.
Read campaign 17V268000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
249 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
NTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031705
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031705 at NHTSANTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031704
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031704 at NHTSANTB23-023BFLUID LEAK FROM THE FRONT DIFFERENTIAL CASE ACTUATOR MOTOR PLASTIC THREADS SERVICE INFORMATION Figure 1 Figure 2 If the front differential has a fluid leak coming from the actuator motor plastic threads (Figure 1): a. Place an …NHTSA ID 11014473
FLUID LEAK FROM THE FRONT DIFFERENTIAL CASE ACTUATOR MOTOR PLASTIC THREADS SERVICE INFORMATION Figure 1 Figure 2 If the front differential has a fluid leak coming from the actuator motor plastic threads (Figure 1): a. Place an alignment mark on the splined actuator body and the gear carrier (Figure 2). b. Remove the actuator and thoroughly clean the threads, making sure not to allow RTV to fall into the differential case. c. Once clean, apply Three Bond sealant to the threads, and then reinstall the actuator motor, making sure to line up the alignment marks. d. Check the front differential gear oil level and top to specification. o Refer to the ESM: TRANSMISSION & DRIVELINE > DRIVELINE > FRONT FINAL DRIVE: MA235/MA210 > PERIODIC MAINTENANCE > FRONT DIFFERENTIAL GEAR OIL DO NOT replace the front differential due to a fluid leak from the actuator motor plastic threads unless there has been consequential damage due to fluid loss (bearing failure or gear noise) to the front differential.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 11014473 at NHTSANTB24-061CAMPAIGN BULLETIN Cummins NOx Emissions Voluntary Emission Recall Campaign PD128 PD129 ***** Campaign Summary ***** Nissan is conducting a Voluntary Emissions Recall Campaign on certain 2016-2019 Titan Diesel vehicles identifie…NHTSA ID 11014078
CAMPAIGN BULLETIN Cummins NOx Emissions Voluntary Emission Recall Campaign PD128 PD129 ***** Campaign Summary ***** Nissan is conducting a Voluntary Emissions Recall Campaign on certain 2016-2019 Titan Diesel vehicles identified in Service Comm and DBS National Service History. Vehicles affected by this campaign require upgraded emissions control software and hardware for model years 2016-2017 or upgraded software only for model years 2018-2019. This finding has no effect on the safety of the vehicle. Cummins and the California Air Resources Board have entered into an agreement to correct this condition. In order to implement this correction, Nissan is conducting a Voluntary Emission Recall Campaign. The remedy and parts are now available. Nissan dealers will update the emissions control software and install a Particulate Matter Sensor for model years 2016-2017 and update emissions control software only for model years 2018-2019. IMPORTANT: It is a violation of Federal law for dealers to sell or deliver new vehicles in their inventory covered by this notification until the campaign’s remedy action is performed.): REVISION 2 Please discard earlier versions of this bulletin. The announcement from January 10, 2025 has been revised to include the following: • The remedy and parts are now available, please refer to NTB24-061 to remedy any vehicle affected by PD128 and NTB24-062 to remedy any vehicle affected by PD129. Parts are on restriction and can be ordered via DBS. Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale In Effect 2016-2017 Titan (A61D) 27,085 NA December 20, 2024 NO Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale In Effect 2018-2019 Titan (A61D) 11,614 ***** Campaign Summary ***** Nissan is conducting a Voluntary Emissions Recall Campaign on certain 2016-2019 Titan Diesel vehicles identified in Service Comm and DBS National Service History. Vehicles affected by this campaign require upgraded emissions control software and hardware for model years 2016-2017 or upgraded software only for model years 2018-2019. This finding has no effect on the safety of the vehicle. Cummins and the California Air Resources Board have entered into an agreement to correct this condition. In order to implement this correction, Nissan is conducting a Voluntary Emission Recall Campaign. The remedy and parts are now available. Nissan dealers will update the emissions control software and install a Particulate Matter Sensor for model years 2016-2017 and update emissions control software only for model years 2018-2019.
Campaign / software reference: PD128, PD129
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11014078 at NHTSANTB24-063CAMPAIGN BULLETIN VECI Label Voluntary Emission Recall Campaign ***** Campaign Summary ***** Nissan is conducting a Voluntary Emissions Recall Campaign on specific model year 2016-2019 Titan Diesel vehicles identified in Servic…NHTSA ID 11014077
CAMPAIGN BULLETIN VECI Label Voluntary Emission Recall Campaign ***** Campaign Summary ***** Nissan is conducting a Voluntary Emissions Recall Campaign on specific model year 2016-2019 Titan Diesel vehicles identified in Service Comm and DBS National Service History. Vehicles affected by this campaign may have been shipped to market with an Exemption label and should have been shipped with a Vehicle Emission Control Information (VECI) label. Nissan dealers will inspect for the Exemption label and/or VECI label, and remove Exemption label if present and install VECI label if not present. ***** What Dealers Should Do**** 1. Verify if vehicles are affected by this Voluntary Emission Recall Campaign using Service Comm or DBS National Service History Campaign I.D. PD127. 2. Dealers should use NTB24-063 to remedy any vehicles affected by this campaign. 3. Once remedied, dealers should submit the claim, using the claims coding provided, and release the vehicle. ***** Release Schedule ***** Parts Refer to NTB24-063 to determine the parts required for this campaign. Part numbers 14805-EZ40B and 14805-9FU5A are on restriction and can be ordered via DBS. Part numbers 14805-EZ40A and 14805-EZ41C can be ordered via the normal process. Repair • NTB24-063 Owner Notification Nissan will begin sending notifications to owners of all potentially affected vehicles in February 2025, via U.S. Mail.
Campaign / software reference: PD127
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11014077 at NHTSANTB24-063VOLUNTARY EMISSIONS RECALL CAMPAIGN 2016-2019 TITAN XD DIESEL; VEHICLE EMISSION CONTROL INFORMATION LABEL INTRODUCTION Nissan is conducting this voluntary emissions recall campaign on certain specific model year 2016-2019 Titan…NHTSA ID 11014074
VOLUNTARY EMISSIONS RECALL CAMPAIGN 2016-2019 TITAN XD DIESEL; VEHICLE EMISSION CONTROL INFORMATION LABEL INTRODUCTION Nissan is conducting this voluntary emissions recall campaign on certain specific model year 2016-2019 Titan XD vehicles with Diesel engines to inspect and, if necessary, replace the Vehicle Emission Control Information Label. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PD127 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary emissions recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
Campaign / software reference: PD127
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11014074 at NHTSANTB24-061VOLUNTARY EMISSIONS RECALL CAMPAIGN 2016-2017 TITAN XD DIESEL; PM SENSOR INTRODUCTION Nissan is conducting this voluntary emissions recall campaign on certain specific model year 2016-2017 Titan XD vehicles equipped with a dies…NHTSA ID 11014071
VOLUNTARY EMISSIONS RECALL CAMPAIGN 2016-2017 TITAN XD DIESEL; PM SENSOR INTRODUCTION Nissan is conducting this voluntary emissions recall campaign on certain specific model year 2016-2017 Titan XD vehicles equipped with a diesel engine, to install a Particulate Matter (PM) Sensor and reprogram the Engine Control Module (ECM). This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PD128 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary emissions recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
Campaign / software reference: PD128
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11014071 at NHTSANTB24-060VOLUNTARY EMISSIONS RECALL CAMPAIGN 2017 TITAN XD DIESEL; ENGINE CONTROL MODULE INTRODUCTION Nissan is conducting this voluntary emissions recall campaign on certain specific model year 2017 Titan XD vehicles equipped with a di…NHTSA ID 11014070
VOLUNTARY EMISSIONS RECALL CAMPAIGN 2017 TITAN XD DIESEL; ENGINE CONTROL MODULE INTRODUCTION Nissan is conducting this voluntary emissions recall campaign on certain specific model year 2017 Titan XD vehicles equipped with a diesel engine, to replace the Engine Control Module (ECM). This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PD126 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary emissions recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
Campaign / software reference: PD126
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11014070 at NHTSANTB19-071DDTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero…NHTSA ID 11009068
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 11009068 at NHTSANTB17-127CINTELLIGENT KEY INITIALIZATION PROCEDURE STOPS OR WILL NOT CONTINUE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.NHTSA ID 11004963
INTELLIGENT KEY INITIALIZATION PROCEDURE STOPS OR WILL NOT CONTINUE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004963 at NHTSANTB13-107GVEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004962
VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004962 at NHTSANTB13-027DCAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004961
CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004961 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Loss of motive power due to broken crankshaft with no ability to restart.PE23020
On November 15, 2023, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE23020 to investigate allegations of loss of motive power in model year (MY) 2016 through 2019 Nissan Titan XD trucks equipped with 5.0L Cummins diesel engines. The complaints allege the condition was due to a failure of the engine crankshaft. The purpose of the investigation was to understand the scope, frequency, and safety related consequence of the alleged defect. During the investigation, it was found that the subject vehicles can experience a loss of motive power due to a failure of the crankshaft main bearings which can lead to a fractured crankshaft. This resulted in a loss of motive power and an inability to restart. An analysis of all complaint sources shows many vehicles exhibit knocking, vibration, malfunction indicator lamp (MIL) warnings, and/or poor engine performance prior to a total failure. Some consumers report driving their truck in for repairs only to be diagnosed with a failed crankshaft. ODI has not identified any injuries or fires attributable to this failure. ODI is aware of one complaint alleging a non-injury crash involving a curb strike. ODI is also aware of complaints of overheating starter motors and melted starter motor wiring occurring after prolonged attempts to start engines that have suffered a broken crankshaft. In its response to ODI's January 26, 2024 information request letter, Nissan provided information detailing several material and process changes involved in the production of the subject vehicle’s engine.These changes appear to coincide with incremental improvements in failure rates but there is no indication that a single factor was the primary cause of the failures. Analysis of ODI consumer complaints and manufacturer provided data found that failure rates decreased progressively for each model year. Review of failure mileage found that 50% of the failures occurred by 60,000 miles with a significant decrease in failures after 80,000 miles. Assuming average yearly mileage driven, the newest model year trucks (2019) would be near or past peak failure mileage. Given the low failure rate, the observable warnings available to the driver, and much of the fleet being past peak failure mileage, ODI is closing this Preliminary Evaluation with no further action. The closing of the investigation does not constitute a finding by NHTSA that a defect does not exist, and NHTSA will take further action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Recorded closure: Jun 27, 2025
Find investigation PE23020Desiccated Air Bag Inflator RuptureEA21002
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Find investigation EA21002Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.