The vehicle dossier US · 2022
2022 Nissan
ROGUEProblems & recalls
237 distinct owner reports in the NHTSA snapshot. Engine appears in 169 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 237 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 5 years with reports.
60,300 miles is the median among 41 reports with usable mileage. The middle half spans 45,848–73,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
1 recall campaign on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICALCampaign 25V437000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2021-2024 Rogue, 2019-2020 Altima, 2019-2022 Infiniti QX50, and 2022 Infiniti QX55 vehicles equipped with 3-cylinder 1.5L or 4-cylinder 2.0L variable compression turbo (VC-Turbo) engines. The engine bearings may have manufacturing defects that can lead to engine failure.
Manufacturer’s stated response
Dealers will reprogram the engine control module (ECM) software, free of charge. Owner letters were mailed April 8, 2026. Owners may contact Nissan's customer service at 800-647-7261 or Infiniti's customer service at 1-800-662-6200. Nissan's numbers for this recall are R25A8/A9 and R25B1/B2.
Manufacturer campaign: R25A8/A9 R25B1/B2/D1
Read campaign 25V437000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
103 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
NTB26-006AFUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM This bulletin is no longer active. Please discard previous versions of NTB26-006.NHTSA ID 11033026
FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM This bulletin is no longer active. Please discard previous versions of NTB26-006.
Components: FUEL/PROPULSION SYSTEM. Confirm detailed applicability in the original document.
Source record 11033026 at NHTSANTB26-019MIL ON WITH DTC P0181 STORED IN THE ECM IF YOU CONFIRM The customer states the MIL is ON but the vehicle does not have any drivability concerns or reduced power message in the combination meter, AND DTC P0181 for “Fuel Tank Tem…NHTSA ID 11031721
MIL ON WITH DTC P0181 STORED IN THE ECM IF YOU CONFIRM The customer states the MIL is ON but the vehicle does not have any drivability concerns or reduced power message in the combination meter, AND DTC P0181 for “Fuel Tank Temperature” is stored in either “Past” or “Current” in the ECM. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Replace the fuel temperature sensor. 2. Erase all the DTCs.
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11031721 at NHTSANTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031705
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031705 at NHTSANTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031704
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031704 at NHTSANTB26-006FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as “Active”,…NHTSA ID 11028683
FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as “Active”, “Past”, or “Pending” in the ECM. ACTION 1. Remove the supplied funnel from the rear of the vehicle or trunk. 2. Insert the funnel completely in the fuel filler tube and remove completely five (5) times. 3. Re-check the fuel filler tube lower seal with a smoke machine to determine visually if any leak is present. 4. If the fuel filler lower seal continues to leak, replace the fuel filler tube. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Components: FUEL/PROPULSION SYSTEM. Confirm detailed applicability in the original document.
Source record 11028683 at NHTSANTB25-030ASTEERING WHEEL SWITCH BUTTONS INOPERATIVE, STICKING, OR NOT CLICKING WHEN PRESSED IF YOU CONFIRM The customer states that any of the steering wheel switch buttons are inoperative, sticking, or not clicking when pressed. ACTION …NHTSA ID 11024395
STEERING WHEEL SWITCH BUTTONS INOPERATIVE, STICKING, OR NOT CLICKING WHEN PRESSED IF YOU CONFIRM The customer states that any of the steering wheel switch buttons are inoperative, sticking, or not clicking when pressed. ACTION Follow the SERVICE PROCEDURE to: 1. Remove the steering wheel assembly. 2. Replace the switch assembly on the steering wheel assembly. HINT: The switch assembly includes switches for both sides of the steering wheel. 3. Reinstall the steering wheel assembly. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Campaign / software reference: EL25-001A
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11024395 at NHTSANTB25-008"ENGINE MALFUNCTION POWER REDUCED SERVICE NOW" DISPLAYED IN COMBINATION METER IF YOU CONFIRM The customer states that a "Engine Malfunction Power Reduced Service Now" warning is being displayed, or was displayed in the past, OR…NHTSA ID 11015914
"ENGINE MALFUNCTION POWER REDUCED SERVICE NOW" DISPLAYED IN COMBINATION METER IF YOU CONFIRM The customer states that a "Engine Malfunction Power Reduced Service Now" warning is being displayed, or was displayed in the past, OR DTC P0404 for “EGR A CONTROL” is stored as “Past” or “Current” in the ECM. ACTION Refer to the SERVICE PROCEDURE in this bulletin to: 1. Confirm the current ECM part number. 2. Reprogram the ECM, if applicable. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11015914 at NHTSANTB25-014REAR VIEW CAMERA IS INOPERATIVE OR "X" IS DISPLAYED WHEN SHIFTING INTO REVERSE IF YOU CONFIRM The Rear View Camera is inoperative or an "X" is displayed when shifting into reverse, AND There is corrosion at the Rear View Camera…NHTSA ID 11015917
REAR VIEW CAMERA IS INOPERATIVE OR "X" IS DISPLAYED WHEN SHIFTING INTO REVERSE IF YOU CONFIRM The Rear View Camera is inoperative or an "X" is displayed when shifting into reverse, AND There is corrosion at the Rear View Camera wiring harness connector D504 (Figure 2 on page 2). ACTION 1. Replace the Wiper Grommet Seal, the Rear Camera Harness, add Rear Camera Wiring Harness Dampers and, if there are signs of corrosion in the camera connector, the Camera. 2. Add Drain holes to the bottom of the rear door.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11015917 at NHTSANTB19-042FAUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illumina…NHTSA ID 11014472
AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: When contamination or foreign material adhere to the lane camera viewing window on the windshield. When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield. When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information: Refer to the following pages. Use the search keyword “blinking” in the ESM.
Components: ELECTRICAL SYSTEM · FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING · SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 11014472 at NHTSANTB19-033GINTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea o…NHTSA ID 11014471
INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving (Figure 1), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual
Components: ELECTRICAL SYSTEM · FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL · FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING · SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 11014471 at NHTSANTB25-007MIL ON WITH DTC P0196 STORED IN THE ECM IF YOU CONFIRM The MIL is ON with DTC P0196 for “EOT SENSOR” stored in the ECM. HINT: DTC P0012 for “INTAKE VALVE TIMING CONTROL B1” may be stored along with P0196 for “EOT SENSOR”. ACTIO…NHTSA ID 11014075
MIL ON WITH DTC P0196 STORED IN THE ECM IF YOU CONFIRM The MIL is ON with DTC P0196 for “EOT SENSOR” stored in the ECM. HINT: DTC P0012 for “INTAKE VALVE TIMING CONTROL B1” may be stored along with P0196 for “EOT SENSOR”. ACTION Follow the SERVICE PROCEDURE in this bulletin to diagnose DTC P0196 for “EOT SENSOR”. Disregard P0012 if stored along with P0196. Do not follow the service information in the ESM when diagnosing P0196. The ESM information will be updated at a later date.
Components: ELECTRICAL SYSTEM · ENGINE. Confirm detailed applicability in the original document.
Source record 11014075 at NHTSANTB25-003CHARGE AIR COOLER SYSTEMS SERVICE INFORMATION SERVICE INFORMATION If a body shop or dealer performs a repair affecting the charge air cooler (Figure 1), please be aware of the following information regarding the charge air cool…NHTSA ID 11013279
CHARGE AIR COOLER SYSTEMS SERVICE INFORMATION SERVICE INFORMATION If a body shop or dealer performs a repair affecting the charge air cooler (Figure 1), please be aware of the following information regarding the charge air cooler coolant refill procedure. IMPORTANT: If the charge air cooler coolant reservoir (Figure 2 on page 2) is not filled properly per details in this bulletin, spark plug and/or engine damage may occur. Figure 1
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11013279 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
2021 Nissan Rogue Inner Tie Rod FailuresPE24020
The Office of Defects Investigation (ODI) opened this investigation to assess allegations of tie rod bending, deformation, or related steering linkage damage in certain 2021 Nissan Rogue vehicles. A bent tie rod can affect wheel alignment and steering geometry, and in some circumstances may result in steering pull, abnormal tire wear, reduced steering precision, difficulty maintaining directional control, or loss of vehicle steering control, increasing the risk of a crash. ODI reviewed Vehicle Owner Questionnaires (VOQs), Early Warning Reporting data, manufacturer field reports, warranty claims, consumer complaints submitted to the manufacturer, and other information provided by Nissan in response to ODI’s information request. ODI also evaluated the reported failure circumstances, vehicle age and mileage, incident severity, and whether the available evidence indicated a defect trend occurring in the absence of external impact or other non-defect causes. Based on the information reviewed, ODI identified a low number of tie rod bending or deformation allegations relative to the subject vehicle population and exposure. The available reports did not indicate a consistent failure pattern, common production period, common mileage, or repeatable failure mode suggestive of a safety-related defect. Many of the reviewed incidents involved circumstances consistent with external loading or impact-related damage, including pothole strikes, curb contact, road debris impacts, prior collision damage, or other abnormal steering/suspension loads. ODI’s analysis did not identify a trend of tie rod bending occurring during normal vehicle operation without evidence of external influence. The complaint and warranty rates were low, and ODI did not identify a pattern of crashes, injuries, or loss-of-control events attributable to a tie rod defect in the subject vehicles. Accordingly, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take further action if warranted by new circumstances or additional information. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Recorded closure: Aug 24, 2026
Find investigation PE24020Complete loss of motive power due to engine failurePE23023
On December 13, 2023, the Office of Defects Investigation (ODI) opened PE23-023 to investigate allegations of engine failures leading to loss of motive power in model year (MY) 2021-2023 Nissan Rogue; MY 2019-2021 Nissan Altima; and MY 2019-2021 Infiniti QX50 vehicles. At that time, ODI had received 6 Vehicle Owner Questionnaires (VOQ) and multiple early warning reports, with consumers reporting engine knocking noises accompanied by a loss of engine power while driving. The investigation identified bearing failures in certain vehicles equipped with the subject 3-cylinder 1.5L or 4-cylinder 2.0L variable compression turbo (VC-Turbo) engines. ODI also identified early warning reports describing thermal incidents that occurred immediately after the vehicle suffered a catastrophic engine failure. The failures were the result of a manufacturing defect in specific engine bearings (main, A-, C-, and L-link) or other engine components that may cause engine damage and potentially lead to engine failure. Engine failure can result in a loss of motive power event that can increase the risk of a crash. Engine failure might also result in a fire if internal components detach and impact the engine block creating a hole that allows engine oil to reach hot surfaces. In its April 2024, May 2024, and June 2025 responses to ODI’s information requests, Nissan provided 998 customer reports (including complaints, field reports, and legal claims) and 1,107 warranty claims related to the alleged defect. When combining ODI and manufacturer report data, there are 1,878 unique VINs that have experienced failures across all subject vehicles. In one of the early warning reports, ODI identified an incident involving a 2022 Infiniti QX55 that resulted in an engine fire following an alleged engine failure. The 2022 Infiniti QX55 was not included in the scope of this investigation but the vehicle model shares the same 4-cylinder 2.0L variable compression turbo engine. Based on the information included with the early warning report, the fire can be directly related to the alleged defect. A further review of ODI and manufacturer data, identified 12 allegations of engine compartment fires in subject vehicles; three were confirmed as directly related to the engine failure, and nine reports described an under-hood fire that occurred following a loss of power event. Additionally, ODI identified multiple reports describing an engine block crack or hole surrounded by oil residue following an engine failure. On June 27, 2025, Nissan submitted recall 25V-437 involving 443,899 MY 2021-2023 Nissan Rogue, MY 2019-2021 Nissan Altima; MY 2019-2021 Infiniti QX50; and 2022 Infiniti QX55 vehicles. The recall remedy provides the dealer instructions to inspect the engine oil pan for the presence of specific metal debris. For customers with the 3-cylinder 1.5L VC-Turbo engine, if no debris is detected during the inspection, dealers will replace the oil pan gasket, engine oil, and reprogram the vehicle’s Engine Control Module (ECM). For customers with the 4-cylinder 2.0L VC-Turbo engine, if no debris is detected, dealers will replace the engine oil. In the case where specific debris is detected and confirmed by Nissan Powertrain Call Center, dealers will be instructed to replace the engine. In addition, Nissan will extend the vehicle warranty to 10 years and 120,000 miles for the recall subject vehicle population after the dealer performs the inspection. Nissan has implemented multiple corrective actions to address the identified manufacturing defects of certain engine block internal components. In view of the recall action (25V437) taken by Nissan, ODI is closing this Preliminary Evaluation. The agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
Recorded closure: Jul 18, 2025
Campaign reference in the source: 25V437
Find investigation PE23023Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.