The vehicle dossier US · 2004
2004 Nissan
QUESTProblems & recalls
445 distinct owner reports in the NHTSA snapshot. Other components appears in 168 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 445 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
33,821 miles is the median among 320 reports with usable mileage. The middle half spans 5,000–92,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
4 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
SEATS:MID/REAR ASSEMBLYCampaign 05V480000
Reported concern
ON CERTAIN MINI VANS EQUIPPED WITH A FOLDING THIRD ROW REAR SEAT, WHEN THE THIRD ROW SEAT IS RAISED FROM ITS STOWED POSITION, IT ENGAGES STRIKER BRACKETS, ONE ON EACH SIDE OF THE SEAT CUSHION. THE FOLD-AWAY STRIKER LOOP IS WELDED TO A MOUNTING BRACKET. THE STRIKER MAY BECOME DETACHED FROM ITS MOUNTING BRACKET DUE TO A BROKEN WELD AT THE POINT OF ATTACHMENT TO THE BRACKET.
Manufacturer’s stated response
DEALERS WILL REPLACE THE THIRD ROW SEAT STRIKER BRACKETS FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 19, 2005. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Read campaign 05V480000 at NHTSASEATS:MID/REAR ASSEMBLYCampaign 05V474000
Reported concern
ON CERTAIN MINI VANS, THERE IS A SEAT ADJUSTMENT MECHANISM THAT CONTAINS EXPOSED MOVING COMPONENTS LOCATED AT THE REAR INSIDE EDGE OF THE SECOND ROW SEAT.
Manufacturer’s stated response
ON EARLIER MODEL VEHICLES BUILT THROUGH JUNE 28, 2004, DEALERS WILL REPLACE THE INBOARD SECOND ROW SEAT ADJUSTMENT HANDLE, RIVET A PLASTIC REINFORCEMENT TO BACKSIDE OF THE EXISTING SEAT BACK COVER CARPETING, INSTALL TIE-DOWNS AND A FLANGE TO THE INBOARD SIDE SHIELD. ON VEHICLES PRODUCED FROM JUNE 29, 2004 THROUGH SEPTEMBER 26, 2005, DEALERS WILL RIVET A PLASTIC REINFORCEMENT TO THE BACKSIDE OF THE EXISTING SEAT BACK COVER CARPETING, INSTALL TIE-DOWNS AND A FLANGE ON THE INBOARD SIDE SHIELD. THE RECALL BEGAN ON DECEMBER 19, 2005. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Manufacturer campaign: R0504
Read campaign 05V474000 at NHTSALATCHES/LOCKS/LINKAGES:DOORS:LATCHCampaign 04V186000
Reported concern
ON CERTAIN MINIVANS EQUIPPED WITH A POWER SLIDING DOOR(S), AT AN AMBIENT TEMPERATURE BELOW APPROXIMATELY 40 DEGREES FAHRENHEIT, THE ACTUATOR FOR THE POWER SLIDING DOOR(S) MAY EXPERIENCE BINDING DUE TO AN OUT-OF-SPECIFICATION CONDITION. IN ORDER TO OPEN, CLOSE OR REVERSE A POWER SLIDING DOOR, THE SHIFT SELECTOR LEVER MUST BE IN "PARK." IF THE ACTUATOR IS EXPERIENCING BINDING AND THE DRIVER SHIFTS THE VEHICLE OUT OF "PARK" WHILE A POWER SLIDING DOOR IS STILL CLOSING, THE DOOR LATCHES MAY NOT ENGAGE.
Manufacturer’s stated response
DEALERS WILL REPLACE THE ACTUATOR FOR THE POWER SLIDING DOOR(S). OWNER NOTIFICATION BEGAN ON JUNE 23, 2004. OWNERS SHOULD CONTACT NISSAN AT 1-800-647-7261.
Manufacturer campaign: RU401
Read campaign 04V186000 at NHTSAAIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVECampaign 04V103000
Reported concern
CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE ADVANCED AIR BAG REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION." THE AIR BAG FOR THE FRONT PASSENGER SEAT IS TO BE TURNED OFF (SO THAT IT DOES NOT INFLATE) WHEN CERTAIN OCCUPANTS, SUCH AS SMALL CHILDREN, ARE IN THE FRONT SEAT.
Manufacturer’s stated response
DEALERS WILL INSPECT THE FRONT PASSENGER SEAT CUSHION/SENSOR ASSEMBLY. IF THE SEAT CUSHION/SENSOR IS FOUND TO BE OPERATING IMPROPERLY, THE SEAT WILL BE REMOVED AND RECALIBRATED. OWNER NOTIFICATION BEGAN ON JUNE 23, 2004. OWNERS SHOULD CONTACT NISSAN AT 1-800-647-7261.
Manufacturer campaign: B0112
Read campaign 04V103000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
115 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
NTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031705
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031705 at NHTSANTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031704
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031704 at NHTSANTB23-080DVOLUNTARY SAFETY RECALL CAMPAIGN 2004-2012 ARMADA, TITAN, AND 2004-2009 QUEST; DRIVER AIR BAG COVER CAMPAIGN ID #: PC944, PC946, PC947, PC949 APPLIED VEHICLES: 2004-2012 Armada (TA60) 2004-2009 Quest (V42) 2004-2012 Titan (A60)…NHTSA ID 11007000
VOLUNTARY SAFETY RECALL CAMPAIGN 2004-2012 ARMADA, TITAN, AND 2004-2009 QUEST; DRIVER AIR BAG COVER CAMPAIGN ID #: PC944, PC946, PC947, PC949 APPLIED VEHICLES: 2004-2012 Armada (TA60) 2004-2009 Quest (V42) 2004-2012 Titan (A60) Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility. INTRODUCTION Nissan is conducting this voluntary safety recall campaign on certain specific model year 2004-2012 Armada, 2004-2012 Titan, and 2004-2009 Quest vehicles, to inspect and if necessary, replace the driver Air Bag Cover. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification numbers PC944, PC946, PC947 and PC949 to this campaign. The vehicle specific number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed. This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Campaign / software reference: PC944, PC946, PC947, PC949
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 11007000 at NHTSANTB13-107GVEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004962
VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004962 at NHTSANTB17-019HWINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001201
WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 11001201 at NHTSANTB13-028IREMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001194
REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 11001194 at NHTSANTB09-081KWINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001191
WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 11001191 at NHTSANTB08-097LDIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 10243708
DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: STEERING. Confirm detailed applicability in the original document.
Source record 10243708 at NHTSANTB23-053SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe pe…NHTSA ID 10239062
SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10239062 at NHTSANTB23-04912 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommenda…NHTSA ID 10239060
12 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect âTest with DCAâ and âReplaceâ results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: ï· CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 ï· CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ ï· DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ ï· DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10239060 at NHTSANTB13-107FVEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 10235707
VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10235707 at NHTSANTB16-003CINTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.NHTSA ID 10235710
INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10235710 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
SIDE AIR BAG NON-DEPLOYMENTPE08004
THE SUBJECT VEHICLES ARE EQUIPPED WITH OPTIONAL SEAT-MOUNTED SIDE AIR BAGS.ALL VEHICLES ARE EQUIPPED WITH STANDARD FRONTAL AIR BAGS AND SIDE AIR CURTAINS.INSTALLATION OF THE INCORRECT SRS DIAGNOSIS SENSOR UNIT DOES NOT IMPAIR DEPLOYMENT OF THE FRONTAL AIR BAG AND SIDE AIR CURTAIN IN THE EVENT OF A CRASH.NO REPORTS OF NON-DEPLOYMENT OF THE SUBJECT SEAT-MOUNTED SIDE AIR BAGS HAVE BEEN RECEIVED BY THE MANUFACTURER OR BY NHTSA.THE WARRANTY REPORTS CITED ABOVE REPRESENT VEHICLE INSPECTIONS CONDUCTED UNDER THE SERVICE CAMPAIGN AND SENSOR REPLACEMENT WAS REQUIRED IN 32 OF THESE CASES.THE MANUFACTURER REPORTS A TOTAL OF 151 SENSOR UNITS SOLD AS REPLACEMENT PARTS FOR ALL PURPOSES.INVESTIGATION DISCLOSED A LOW INCIDENCE OF SENSOR REPLACEMENT REQUIRED UNDER THE SERVICE CAMPAIGN TO DATE.NO INCIDENTS OF REAL WORLD NON-DEPLOYMENT OF THE SUBJECT AIR BAGS WERE IDENTIFIED.THIS PRELIMINARY EVALUATION IS CLOSED.
Recorded closure: May 30, 2008
Find investigation PE08004FINGER PINCH POINTEA05012
THE SEAT ADJUSTMENT MECHANISM CONTAINS EXPOSED MOVING COMPONENTS, LOCATED AT THE REAR EDGE OF THE SECOND ROW SEAT.WHEN THE OPERATOR ATTEMPTS TO ADJUST THE SEAT, A FINGER MAY BE PINCHED IN THE MOVING SEAT ADJUSTMENT MECHANISM.NISSAN WILL CONDUCT A SAFETY RECALL ON AN EXPANDED SCOPE OF NISSAN QUEST VEHICLES.ON VEHICLES PRODUCED FROM MARCH 26, 2003 THROUGH SEPTEMBER 26, 2005, NISSAN WILL RIVET A PLASTIC REINFORCEMENT TO THE BACKSIDE OF THE EXISTING SEAT BACK COVER CARPETING, INSTALL THREE TIE-DOWNS AND INSTALL A FLANGE TO THE INBOARD SIDE SHIELD.ON VEHICLES PRODUCED FROM MARCH 26, 2003 THROUGH JUNE 28, 2004, IN ADDITION TO THE ABOVE CORRECTIVE ACTIONS, NISSAN WILL REPLACE THE INBOARD SECOND ROW SEAT ADJUSTMENT HANDLE WITH THE CURRENT PRODUCTION SEAT LEVER. NISSAN NORTH AMERICA, INC. WILL RECALL 109,437 MY 2004-2005 NISSAN QUEST VEHICLES PRODUCED FROM MARCH 26, 2003 THROUGH SEPTEMBER 26, 2005.ODI IS AWARE OF A TOTAL OF 11 COMPLAINTS, FIELD REPORTS AND WARRANTY CLAIMS REPORTING 11 FINGER INJURIES.THE RECALL IS IDENTIFIED BY NHTSA NUMBER 05V474.
Recorded closure: Oct 20, 2005
Campaign reference in the source: 05V474000
Find investigation EA05012FINGER PINCH POINTPE05019
ODI HAS RECEIVED FIVE REPORTS ALLEGING THAT THE CONSUMER WAS INJURED USING THE VEHICLE'S SECOND-ROW SEAT RELEASE LEVER TO FOLD THE SECOND ROW SEAT.NISSAN STATES, ...THE CUSTOMER OPERATION OF THE LEVER IN SOME CASES AND SUBSEQUENT ORIENTATION OF THEIR FINGERS IS DIFFERENT THAN EXPECTED.NISSAN ALSO REPORTED ADDITIONAL COMPLAINTS FOR A TOTAL OF 11 INJURIES.NISSAN MODIFIED THE LEVER FOR PRODUCTION TWICE.THE LATEST (SECOND MODIFICATION) DESIGN PROVIDES A LARGER SIZED HANDLE THAT CONTAINS A CUP INTO WHICH THE SEAT OCCUPANT CAN PLACE THEIR FINGERS TO OPERATE THE ADJUSTMENT LEVER.NISSAN REPORTS NO INJURIES ASSOCIATED WITH THE CUP DESIGN LEVER.BEGINNING JUNE 2004, NISSAN INITIATED A CUSTOMER SATISFACTION INITIATIVE THAT INCLUDED REPLACING THE ORIGINAL DESIGN HANDLE WITH THE FIRST MODIFICATION HANDLE (THIS IS NOT THE CUP DESIGN HANDLE MENTIONED ABOVE).THE INVESTIGATION HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS (EA05-012) TO ALLOW FURTHER ANALYSIS OF THE ISSUE.
Recorded closure: Aug 19, 2005
Find investigation PE05019POWER-SLIDING DOOR OPENINGPE04027
IN JANUARY 2004, NISSAN RECEIVED REPORTS OF POWER SLIDING DOORS COMING OPEN WHILE DRIVING.NISSAN DETERMINED THAT AT TEMPERATURES BELOW 40 DEGREE F, AN OUT-OF-SPEC DOOR ACTUATOR COULD BIND AND PREVENT THE DOOR LATCHES FROM FULLY ENGAGING.THIS CAN LEAD TO THE DOOR COMING OPEN UNEXPECTEDLY.NISSAN NOTIFIED NHTSA BY LETTER DATED APRIL 1, 2004, THAT IT IS CONDUCTING A SAFETY RECALL CAMPAIGN (NHTSA NO. 04V186) ON MY 2004 NISSAN QUEST VEHICLES WITH POWER-SLIDING DOORS PRODUCED FROM MARCH 26, 2003 TO DECEMBER 17, 2003.NISSAN MODIFIED THE ACUTATOR DOOR MOTOR ON VEHICLES BUILT AFTER DECEMBER 17, 2003 FOR REASONS NOT RELATED TO THE INADVERTENT DOOR OPENING ISSUE.NISSAN REPORTS THAT VEHICLES BUILT AFTER DECEMBER 17, 2003 ARE NOT SUBJECT TO THE FAILURE MODE THAT CAUSES INADVERTENT OPENING.ODI'S REVIEW OF THE ODI OWNER REPORTS WITH KNOWN BUILD DATES (7 OF 9 REPORTS, PLUS ONE REPORT RECEIVED PRIOR TO DEC 17 BUT WITH UNKNOWN BUILD DATE) INDICATES THAT COMPLAINT VEHICLES WERE MANUFACTURED BEFORE THE DOOR ACTUATOR IMPROVEMENT DATE (DEC 17).ALSO, NISSAN REPORTS NO COMPLAINT VEHICLES WITH BUILD DATES AFTER DECEMBER 17.NISSAN'S ACTION ADDRESSES THE CONCERNS OF ODI.THEREFORE, THIS INVESTIGATION IS CLOSED.
Recorded closure: Jun 2, 2004
Campaign reference in the source: 04V186000
Find investigation PE04027Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.