The vehicle dossier US · 2019
2019 Nissan
ALTIMAProblems & recalls
232 distinct owner reports in the NHTSA snapshot. Other components appears in 118 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 232 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 9 years with reports.
18,073 miles is the median among 76 reports with usable mileage. The middle half spans 2,790–46,593 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
7 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICALCampaign 25V437000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2021-2024 Rogue, 2019-2020 Altima, 2019-2022 Infiniti QX50, and 2022 Infiniti QX55 vehicles equipped with 3-cylinder 1.5L or 4-cylinder 2.0L variable compression turbo (VC-Turbo) engines. The engine bearings may have manufacturing defects that can lead to engine failure.
Manufacturer’s stated response
Dealers will reprogram the engine control module (ECM) software, free of charge. Owner letters were mailed April 8, 2026. Owners may contact Nissan's customer service at 800-647-7261 or Infiniti's customer service at 1-800-662-6200. Nissan's numbers for this recall are R25A8/A9 and R25B1/B2.
Manufacturer campaign: R25A8/A9 R25B1/B2/D1
Read campaign 25V437000 at NHTSABACK OVER PREVENTION: SENSING SYSTEM: CAMERACampaign 23V628000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2019-2021 Altima and 2020-2021 Sentra vehicles. Damage to the camera harness can cause distortion or loss of the rearview camera display image. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Manufacturer’s stated response
Dealers will inspect the rearview camera and harness for damage and replace them as necessary. If no damage is found, the dealer will apply protective tape and reroute the rearview camera harness. Repairs will be performed free of charge. Owner notification letters are expected to be mailed October 19, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is R23C3.
Manufacturer campaign: R23C3
Read campaign 23V628000 at NHTSATIRES:SIDEWALLCampaign 21V169000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2019-2020 Altima and 2018-2021 Titan vehicles equipped with Continental tires. On the affected vehicles, it is possible that one or more tires were cured for too long during tire production.
Manufacturer’s stated response
Nissan will notify owners, and dealers will inspect the tires, and replace them as necessary, free of charge. Owner notification letters were mailed on May 11, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is PC798.
Manufacturer campaign: PC798
Read campaign 21V169000 at NHTSABACK OVER PREVENTION: SENSING SYSTEM: CAMERACampaign 19V654000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2018-2019 Nissan Altima, Armada, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Titan Diesel, Versa Note and Versa Sedan vehicles, as well as Infiniti Q50, Q60, QX30 and QX80 vehicles. Additionally included are 2019 Nissan GT-R and Taxi and Infiniti QX50, QX60, Q70, Q70L vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Manufacturer’s stated response
Nissan will notify owners in phases, having dealers update the back-up camera settings software, free of charge. The recall began November 11, 2019 and all affected VINs should be activated. Owners may contact Nissan customer service at 1-800-867-7669 or INFINITI customer service at 1-800-662-6200.
Read campaign 19V654000 at NHTSAFUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMPCampaign 19V316000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2019 Altima vehicles equipped with front wheel drive (FWD) and 2.5 liter engines. The fuel pump lock ring may not be fully engaged, possibly causing fuel to leak. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 301, "Fuel System Integrity."
Manufacturer’s stated response
Nissan will notify owners, and dealers will inspect the fuel tank assembly. If the lock ring is disengaged, dealers will tighten the ring to specification. If the lock ring is detached, dealers will replace the fuel pump. Both remedies will be completed free of charge. The recall began May 15, 2019. Owners may contact Nissan customer service at 1-800-867-7669.
Read campaign 19V316000 at NHTSAEXTERIOR LIGHTING:BRAKE LIGHTS:SWITCHCampaign 19V235000
Reported concern
Nissan North America, Inc. (Nissan) is recalling certain 2019 Nissan Altima vehicles. The brake switch bracket may be in the incorrect location, which may cause the brake switch to remain on.
Manufacturer’s stated response
Nissan will notify owners, and dealers will inspect and install a new brake pedal as needed, free of charge. The recall began May 15, 2019. Owners may contact Nissan customer service at 1-800-867-7669.
Read campaign 19V235000 at NHTSAFUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMPCampaign 18V922000
Reported concern
Nissan North America, Inc (Nissan) is recalling certain 2019 Altima vehicles. The retainer clip connecting the low pressure fuel tube to the high pressure fuel pump may not have been locked into position.
Manufacturer’s stated response
Nissan has notified owners, and dealers will route the fuel hose into the holding clip and lock the retainer clip into place, as necessary, free of charge. The recall began February 11, 2019. Owners may contact Nissan customer service at 1-800-867-7669.
Read campaign 18V922000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
188 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
NTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031705
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031705 at NHTSANTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031704
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031704 at NHTSANTB15-049CCTELEMATICS SERVICE INFORMATION HINT: This bulletin applies to vehicles equipped with a 4G network compatible TCU. TCUs compatible with 3G network only are no longer supported. SERVICE INFORMATION The APPLIED VEHICLES that come …NHTSA ID 11031699
TELEMATICS SERVICE INFORMATION HINT: This bulletin applies to vehicles equipped with a 4G network compatible TCU. TCUs compatible with 3G network only are no longer supported. SERVICE INFORMATION The APPLIED VEHICLES that come equipped with a factory installed SOS switch, located near the overhead map lamp, also come equipped with a wireless communication device called a Telematics Communication Unit (TCU). With an active NissanConnect® Services subscription, the TCU communicates with the NissanConnect® Services Data Center to provide various security and convenience services. This bulletin contains important service procedures that must be performed properly in order to set-up and maintain the telematics system for the APPLIED VEHICLES. · A table has been provided on the next page that lists the steps required to successfully configure a TCU after it has been replaced. · A CHECK-OFF SHEET has been provided on page 20 to print and check off steps as they are performed. Staple the completed CHECK-OFF SHEET to the repair order.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11031699 at NHTSANTB19-042FAUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illumina…NHTSA ID 11014472
AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: When contamination or foreign material adhere to the lane camera viewing window on the windshield. When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield. When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information: Refer to the following pages. Use the search keyword “blinking” in the ESM.
Components: ELECTRICAL SYSTEM · FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING · SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 11014472 at NHTSANTB19-033GINTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea o…NHTSA ID 11014471
INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving (Figure 1), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual
Components: ELECTRICAL SYSTEM · FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL · FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING · SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 11014471 at NHTSANTB20-066CLANE CAMERA AIMING VEHICLE REFERENCE VALUES NOT IN ESM SERVICE INFORMATION If the lane camera requires aiming, the values in Table A on page 4 must be used. For all other models/model years, consult the Electronic Service Man…NHTSA ID 11009069
LANE CAMERA AIMING VEHICLE REFERENCE VALUES NOT IN ESM SERVICE INFORMATION If the lane camera requires aiming, the values in Table A on page 4 must be used. For all other models/model years, consult the Electronic Service Manual (ESM).
Components: ELECTRICAL SYSTEM · LANE DEPARTURE: ASSIST · LANE DEPARTURE: WARNING. Confirm detailed applicability in the original document.
Source record 11009069 at NHTSANTB19-071DDTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero…NHTSA ID 11009068
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 11009068 at NHTSANTB12-103ICVT/TCM CALIBRATION DATA “WRITE” PROCEDURE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001192
CVT/TCM CALIBRATION DATA “WRITE” PROCEDURE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 11001192 at NHTSANTB13-107GVEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004962
VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004962 at NHTSANTB13-027DCAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004961
CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004961 at NHTSANTB10-066CCAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004960
CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004960 at NHTSANTB22-038CRAB WARNING LIGHT ON IN INSTRUMENT PANEL AND/OR DTC B2724-23 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004971
RAB WARNING LIGHT ON IN INSTRUMENT PANEL AND/OR DTC B2724-23 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004971 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Complete loss of motive power due to engine failurePE23023
On December 13, 2023, the Office of Defects Investigation (ODI) opened PE23-023 to investigate allegations of engine failures leading to loss of motive power in model year (MY) 2021-2023 Nissan Rogue; MY 2019-2021 Nissan Altima; and MY 2019-2021 Infiniti QX50 vehicles. At that time, ODI had received 6 Vehicle Owner Questionnaires (VOQ) and multiple early warning reports, with consumers reporting engine knocking noises accompanied by a loss of engine power while driving. The investigation identified bearing failures in certain vehicles equipped with the subject 3-cylinder 1.5L or 4-cylinder 2.0L variable compression turbo (VC-Turbo) engines. ODI also identified early warning reports describing thermal incidents that occurred immediately after the vehicle suffered a catastrophic engine failure. The failures were the result of a manufacturing defect in specific engine bearings (main, A-, C-, and L-link) or other engine components that may cause engine damage and potentially lead to engine failure. Engine failure can result in a loss of motive power event that can increase the risk of a crash. Engine failure might also result in a fire if internal components detach and impact the engine block creating a hole that allows engine oil to reach hot surfaces. In its April 2024, May 2024, and June 2025 responses to ODI’s information requests, Nissan provided 998 customer reports (including complaints, field reports, and legal claims) and 1,107 warranty claims related to the alleged defect. When combining ODI and manufacturer report data, there are 1,878 unique VINs that have experienced failures across all subject vehicles. In one of the early warning reports, ODI identified an incident involving a 2022 Infiniti QX55 that resulted in an engine fire following an alleged engine failure. The 2022 Infiniti QX55 was not included in the scope of this investigation but the vehicle model shares the same 4-cylinder 2.0L variable compression turbo engine. Based on the information included with the early warning report, the fire can be directly related to the alleged defect. A further review of ODI and manufacturer data, identified 12 allegations of engine compartment fires in subject vehicles; three were confirmed as directly related to the engine failure, and nine reports described an under-hood fire that occurred following a loss of power event. Additionally, ODI identified multiple reports describing an engine block crack or hole surrounded by oil residue following an engine failure. On June 27, 2025, Nissan submitted recall 25V-437 involving 443,899 MY 2021-2023 Nissan Rogue, MY 2019-2021 Nissan Altima; MY 2019-2021 Infiniti QX50; and 2022 Infiniti QX55 vehicles. The recall remedy provides the dealer instructions to inspect the engine oil pan for the presence of specific metal debris. For customers with the 3-cylinder 1.5L VC-Turbo engine, if no debris is detected during the inspection, dealers will replace the oil pan gasket, engine oil, and reprogram the vehicle’s Engine Control Module (ECM). For customers with the 4-cylinder 2.0L VC-Turbo engine, if no debris is detected, dealers will replace the engine oil. In the case where specific debris is detected and confirmed by Nissan Powertrain Call Center, dealers will be instructed to replace the engine. In addition, Nissan will extend the vehicle warranty to 10 years and 120,000 miles for the recall subject vehicle population after the dealer performs the inspection. Nissan has implemented multiple corrective actions to address the identified manufacturing defects of certain engine block internal components. In view of the recall action (25V437) taken by Nissan, ODI is closing this Preliminary Evaluation. The agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
Recorded closure: Jul 18, 2025
Campaign reference in the source: 25V437
Find investigation PE23023Hertz/Vehicles Rented with Open RecallsAQ22003
NHTSA is opening this audit query to investigate whether The Hertz Corporation (Hertz) has complied with the requirements of the National Traffic and Motor Vehicle Safety Act (Safety Act). The Safety Act requires, among other things, that a rental company shall not rent a vehicle subject to a safety recall unless the recall remedy has been performed. 49 U.S.C. § 30120(i).NHTSA is in receipt of information that indicates Hertz rented vehicles to customers without having performed required recall repairs. Accordingly, we are opening this audit query to seek additional information concerning this issue.
Find investigation AQ22003Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.