The vehicle dossier US · 2002
2002 Nissan
ALTIMAProblems & recalls
1,047 distinct owner reports in the NHTSA snapshot. Engine appears in 682 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 1,047 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
88,173 miles is the median among 801 reports with usable mileage. The middle half spans 64,333–112,176 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
12 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
EXTERIOR LIGHTINGCampaign 09E012000
Reported concern
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Manufacturer’s stated response
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
Read campaign 09E012000 at NHTSAENGINE AND ENGINE COOLINGCampaign 07V527000
Reported concern
ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH A 2.5L ENGINE, THE CRANKSHAFT POSITION SENSOR CAN OVERHEAT CAUSING A BRIEF INTERRUPTION IN THE SIGNAL OUTPUT FROM THE SENSOR.
Manufacturer’s stated response
DEALERS WILL REPROGRAM THE ECM FREE OF CHARGE. CERTAIN MY 2006 ALTIMAS WHICH HAVE BEEN PREVIOUSLY REMEDIED UNDER RECALL CAMPAIGN 06V223 (NISSAN R0606) ARE NOT INCLUDED IN THIS RECALL SINCE THE REPROGRAMMING FOR 06V223 ALSO INCLUDED THIS REPROGRAMMING. THE RECALL BEGAN ON DECEMBER 31, 2007. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Read campaign 07V527000 at NHTSAEXTERIOR LIGHTING:HEADLIGHTSCampaign 07E074000
Reported concern
CERTAIN EAGLE EYES HEADLAMP ASSEMBLIES, P/NOS. DS517-B001L AND DS517-B001R, SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR THE ABOVE LISTED PASSENGER VEHICLES. THE OPTICEL SURFACE OF THE REFLECTOR IS CORRODED INHIBITING THE PERFORMANCE OF THE UPPER AND LOWER BEAMS WHICH FAILS TO CONFORM TO THE PHOTOMETRIC REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Manufacturer’s stated response
EAGLE EYES WILL NOTIFY OWNERS AND OFFER REIMBURSEMENT FOR ANY NONCOMPLIANT HEADLIGHTS. THE RECALL BEGAN ON DECEMBER 11, 2007. OWNERS MAY CONTACT EAGLE EYES AT 1-800-568-1098.
Read campaign 07E074000 at NHTSAEXTERIOR LIGHTING:HEADLIGHTSCampaign 07E063000
Reported concern
CERTAIN ANZO AFTERMARKET HEADLIGHTS, P/N 02-AZ-NA02-B-A, SOLD FOR USE ON 2002-2004 NISSAN ALTIMA VEHICLES. DURING PRODUCTION THE LAMP HOUSING SHAPE DEFORMED DISTORTING THE ASSEMBLY ANGLE OF THE REFLECTOR AND INFLUENCED THE AIMING POSITION. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Manufacturer’s stated response
ANZO WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT LAMPS. THE RECALL BEGAN ON SEPTEMBER 10, 2007. OWNERS CAN CONTACT ANZO AT 909-628-1440.
Read campaign 07E063000 at NHTSAEXTERIOR LIGHTING:HEADLIGHTSCampaign 07E054000
Reported concern
CERTAIN MAXZONE HEADLIGHT ASSEMBLIES, DEPO BRAND, P/NOS. 315-1145L-AS AND 315-1145R-AS, SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR THE ABOVE LISTED PASSENGER VEHICLES. DURING PRODUCTION THE LAMP REFLECTOR SHAPE DEFORMED CHANGING THE SHAPE OF THE OPTIC SURFACE. THIS WILL CHANGE THE OPPOSITE POSITION OF LOW BEAM AND HIGH BEAM OPTICSAND CHANGE THE ANGLE OF INCIDENCE AND ILLUMATED LOCATION WHICH FAILS TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Manufacturer’s stated response
MAXZONE WILL NOTIFY OWNERS AND OFFER REIMBURSEMENT FOR ANY NONCOMPLIANT HEADLIGHTS. THE RECALL BEGAN ON JULY 16, 2007. OWNERS MAY CONTACT MAXZONE AT 909-822-3288.
Read campaign 07E054000 at NHTSAEXTERIOR LIGHTINGCampaign 06E064000
Reported concern
CERTAIN TRADESONIC COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Manufacturer’s stated response
TRADESONIC WILL NOTIFY OWNERS AND REPLACE THE LAMPS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING JULY 2006. OWNERS MAY CONTACT TRADESONIC AT 626-934-8884.
Read campaign 06E064000 at NHTSAEXTERIOR LIGHTING:HEADLIGHTSCampaign 06E023000
Reported concern
CERTAIN ANZO COMBINATION HEADLAMP ASSEMBLIES SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS WHICH FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
Manufacturer’s stated response
ANZO WILL NOTIFY OWNERS AND REPLACE THE HEADLAMPS FREE OF CHARGE. THE RECALL BEGAN MAY 9, 2006. OWNERS MAY CONTACT ANZO USA AT 909-468-3688.
Read campaign 06E023000 at NHTSAENGINE AND ENGINE COOLINGCampaign 03V455000
Reported concern
ON CERTAIN PASSENGER VEHICLES, THE CIRCUIT BOARD FOR THE CRANK POSITION SENSOR OR CAM POSITION SENSOR MAY HAVE AN IMPROPER SOLDER JOINT DUE TO SOLDER DEFORMATION CAUSED BY HEAT STRESS ACCELERATED BY THE EXISTENCE OF FLUX RESIDUE DURING THE SOLDERING PROCESS.
Manufacturer’s stated response
DEALERS WILL REPLACE THE CRANK POSITION SENSORS. CAMSHAFT POSITION SENSOR(S), AND IN SOME CASES, THE VARIABLE TIMING CONTROL SENSOR(S). VEHICLES INVOLVED IN A PREVIOUS RECALL CAMPAIGN, 01V357, ARE ALSO INCLUDED IN THIS NEW CAMPAIGN. THE REPLACEMENT SENSORS USED IN THAT CAMPAIGN ARE ALSO AFFECTED. OWNER NOTIFICATION BEGAN ON DECEMBER 22, 2003. OWNERS SHOULD CONTACT NISSAN AT 1-800-647-7261 OR INFINITI AT 1-800-662-6200.
Manufacturer campaign: R3021/R3022
Read campaign 03V455000 at NHTSAFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLYCampaign 03V251000
Reported concern
ON CERTAIN PASSENGER VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF ALASKA, COLORADO, CONNECTICUT, IOWA, IDAHO, ILLINOIS, INDIANA, KANSAS, MASSACHUSETTS, MAINE, MICHIGAN, MINNESOTA, MISSOURI, MONTANA, NORTH DAKOTA, NEBRASKA, NEW HAMPSHIRE, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, SOUTH DAKOTA, UTAH, VERMONT, WISCONSIN, AND WYOMING. AT EXTREMELY COLD TEMPERATURES, MOISTURE IN THE FUEL TANK COULD FREEZE AND FORM ICE CRYSTALS. THESE ICE CRYSTALS MAY OBSTRUCT THE SUCTION OPENING OF THE FUEL PUMP.
Manufacturer’s stated response
DEALERS WILL INSTALL A SCREEN AT THE SUCTION OPENING OF THE FUEL PUMP TO PREVENT ICE CRYSTALS FROM BLOCKING THE OPENING. OWNER NOTIFICATION BEGAN ON AUGUST 18, 2003. OWNERS SHOULD CONTACT NISSAN AT 1-800-333-0829.
Manufacturer campaign: R3012/P3142
Read campaign 03V251000 at NHTSAENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPECampaign 03V084000
Reported concern
ON CERTAIN VEHICLES EQUIPPED WITH THE 2.5 LITER ENGINE, THE EXHAUST PIPE HANGER PIN MAY CATCH DEBRIS FROM THE ROAD THAT COULD BE IGNITED BY CONTACT WITH THE MAIN CATALYST. ALSO ON 2002 ALTIMA AND SENTRA VEHICLES, CERTAIN ENGINE OPERATING CONDITIONS MAY CAUSE THE PRE-CATALYST TO OVERHEAT AND DAMAGE THE CATALYST SUBSTRATE.
Manufacturer’s stated response
DEALERS WILL REMOVE THE PROTRUDING PORTION OF THE EXHAUST PIPE HANGER PIN. IN ADDITION TO THE CORRECTIVE ACTION, IN ORDER TO REDUCE THE RISK OF FIRE IN THE EVENT OF POOR OR IMPROPER MAINTENANCE THAT COULD RESULT IN OIL SPILLAGE, HEAT SHIELD(S) WILL BE INSTALLED ON THE PRE-CATALYST AND EXHAUST TUBE. OWNER NOTIFICATION BEGAN ON JULY 28, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261. NISSAN RECALL NOS. R3007, R3014, R3015, R3016, R3017. ALSO ON 2002 ALTIMA AND SENTRA VEHICLES, CERTAIN ENGINE OPERATING CONDITIONS MAY CAUSE THE PRE-CATALYST TO OVERHEAT AND DAMAGE THE CATALYST SUBSTRATE. IF SUBSTRATE PARTICLES ENTER THE COMBUSTION CHAMBER, THEY COULD SCORE THE CYLINDER WALLS, RESULTING IN INCREASED OIL CONSUMPTION. IF THE ENGINE OIL LEVEL IS NOT CHECKED ON A PERIODIC BASIS AND DROPS BELOW THE LOW LEVEL, AND THE DRIVER CONTINUES TO OPERATE THE VEHICLE IGNORING NOTICEABLE ENGINE NOISE, ENGINE DAMAGE MAY OCCUR WHICH COULD RESULT IN A FIRE. THE PRE-CATALYST WILL BE TESTED TO ENSURE IT IS WORKING PROPERLY AND REPLACED IF NECESSARY. IF DAMAGE IS FOUND INSIDE THE PRE-CATALYST, IT WILL BE NECESSARY TO REPLACE THE ENGINE.
Manufacturer campaign: R3007/14/15/16/17
Read campaign 03V084000 at NHTSAAIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULECampaign 03V061000
Reported concern
ON CERTAIN VEHICLES, THE ELECTRICAL CONNECTOR FOR THE DRIVER AIR BAG MAY COME LOOSE. IF THE CONNECTOR COMES LOOSE, THE SUPPLEMENTAL AIR BAG WARNING LIGHT FLASHES INTERMITTENTLY.
Manufacturer’s stated response
DEALERS WILL INSTALL A RETAINING CLIP ON THE CLOCK SPRING ELECTRICAL CONNECTOR. OWNER NOTIFICATION BEGAN APRIL 21, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261.
Manufacturer campaign: R3001
Read campaign 03V061000 at NHTSAAIR BAGSCampaign 02I001000
Reported concern
THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. ON CERTAIN 2002 NISSAN ALTIMA MODEL VEHICLES MANUFACTURED PRIOR TO MARCH 16, 2002, ONE OF THE SENSORS FOR THE AIR BAG SYSTEM DOES NOT WORK AS WELL AS EXPECTED IN HIGH-SPEED OFF-SET CRASH SITUATIONS.
Manufacturer’s stated response
DEALERS WILL REPLACE THE AIR BAG SENSOR. OWNER NOTIFICATION BEGAN APRIL 15, 2002. OWNERS SHOULD CONTACT NISSAN AT 1-800-647-7261, CONCERNING THE PROBLEM.
Manufacturer campaign: P2110
Read campaign 02I001000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
142 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
NTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031705
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031705 at NHTSANTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031704
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031704 at NHTSANTB13-107GVEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004962
VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004962 at NHTSANTB17-019HWINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001201
WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 11001201 at NHTSANTB13-028IREMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001194
REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 11001194 at NHTSANTB09-081KWINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001191
WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 11001191 at NHTSAPC926 04-08 MaxiExpiration Notification - Maxima/Altima Floor Pan ***** Dealer Announcement ***** On October 28, 2022, in connection with the court-approved settlement of class action litigation filed in Missouri, Nissan launched a Voluntary S…NHTSA ID 10246452
Expiration Notification - Maxima/Altima Floor Pan ***** Dealer Announcement ***** On October 28, 2022, in connection with the court-approved settlement of class action litigation filed in Missouri, Nissan launched a Voluntary Service Campaign (VSC) on 36,858 specific model year 2002-2006 Nissan Altima and 2004-2008 Nissan Maxima vehicles to inspect, and if necessary, repair for front floor pan corrosion. Per the terms of the settlement, the VSC expired on November 1, 2023. This Voluntary Service Campaign and customer reimbursement for these repairs will no longer be available after November 1, 2023. ***** What Dealers Should Do ***** 1. Service Comm will deactivate PC926 on any unrepaired VINs on November 1, 2023. No further dealer action is required.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10246452 at NHTSANTB22-095AVOLUNTARY SERVICE CAMPAIGN 2002-2006 ALTIMA AND 2004-2008 MAXIMA; FLOOR PAN Voluntary Service Campaign ID # PC926 is no longer active. ï· Repair orders opened after this bulletinâs published date are no longer eligible for r…NHTSA ID 10246436
VOLUNTARY SERVICE CAMPAIGN 2002-2006 ALTIMA AND 2004-2008 MAXIMA; FLOOR PAN Voluntary Service Campaign ID # PC926 is no longer active. ï· Repair orders opened after this bulletinâs published date are no longer eligible for reimbursement under Campaign ID # PC926. ï· Discard all previous versions of NTB22-095.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10246436 at NHTSANTB08-097LDIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 10243708
DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: STEERING. Confirm detailed applicability in the original document.
Source record 10243708 at NHTSANTB23-053SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe pe…NHTSA ID 10239062
SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10239062 at NHTSANTB23-04912 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommenda…NHTSA ID 10239060
12 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect âTest with DCAâ and âReplaceâ results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: ï· CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 ï· CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ ï· DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ ï· DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10239060 at NHTSANTB13-107FVEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 10235707
VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10235707 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
ENGINE COMPARTMENT FIRESPE02078
THE OFFICE OF DEFECTS INVESTIGATION (ODI) OPENED THIS INVESTIGATION ON OCTOBER 18, 2002 BASED ON THREE REPORTS INDICATING THAT THE ENGINE COMPARTMENT IN MODEL YEAR (MY) 2002 NISSAN ALTIMA VEHICLES EQUIPPED WITH THE 2.5 LITER ENGINE CAUGHT ON FIRE WITHOUT ANY WARNING TO THE DRIVER WHILE THE VEHICLE WAS DRIVEN AT HIGHWAY SPEEDS.ONE NON-BURN RELATED INJURY WAS REPORTED AS A RESULT OF THE COMPLAINANT EXITING THE VEHICLE IN HASTE AFTER IT HAD CAUGHT ON FIRE.NISSAN DISCOVERED THAT ONE OF THE HANGER PINS WHICH HOLDS EXHAUST PIPE IN PLACE MAY CATCH DEBRIS FROM THE ROAD.IF THE DEBRIS WERE TO COME IN CONTACT WITH THE MAIN CATALYST, A FIRE COULD RESULT.THIS CONDITION IS ALSO PRESENT IN MY 2003 NISSAN ALTIMA VEHICLES BUILT THRU FEBRUARY 18, 2003.NISSAN ALSO STATED IN ITS DEFECT INFORMATION REPORT THAT ON MY 2002 ALTIMAS AND SENTRAS (EQUIPPED WITH THE 2.5-LITER ENGINE) THAT CERTAIN OPERATING CONDITIONS MAY CAUSE THE PRE-CATALYST TO OVERHEAT, WHICH WOULD CAUSE CATALYST SUBSTRATE PARTICLES TO FLOW INTO THE ENGINE.THESE PARTICLES CAN SCORE THE CYLINDER WALLS WHICH RESULTS IN INCREASE OIL CONSUMPTION.IF THE ENGINE OIL LEVEL IS LOW, ENGINE NOISE AND DAMAGE CAN OCCUR WHICH COULD RESULT IN A FIRE.THE RECALL INCLUDES 268,000 MY 2002-2003 ALTIMAS AND 2002 SENTRAS EQUIPPED WITH THE 2.5-LITER ENGINE.TO CORRECT THE CONDITION NISSAN WILL REMOVE THE PROTRUDING PORTION OF THE EXHAUST PIN ON THE ALTIMAS.NISSAN IS DEVELOPING A CORRECTIVE ACTION TO ADDRESS THE PRE-CATALYST.IN ADDITION TO THE CORRECTIVE ACTION, NISSAN WILL INSTALL HEAT SHIELDS ON THE PRE-CATALYST AND THE SURROUNDING EXHAUST TUBING.NISSAN WILL BEGIN OWNER NOTIFICATION IN MAY OF 2003.
Recorded closure: Mar 25, 2003
Campaign reference in the source: 03V084000
Find investigation PE02078Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.