The vehicle dossier US · 2007
2007 Lexus
RX HYBRIDProblems & recalls
59 distinct owner reports in the NHTSA snapshot. Other components appears in 19 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 59 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 12 years with reports.
58,000 miles is the median among 52 reports with usable mileage. The middle half spans 21,000–110,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
3 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
HYBRID PROPULSION SYSTEM: INVERTERCampaign 13V396000
Reported concern
Toyota is recalling certain model year 2006-2010 Highlander hybrid vehicles manufactured February 16, 2005, through July 29, 2010; and model year 2006-2008 Lexus RX400h vehicles manufactured February 23, 2005, through December 2, 2008. The Intelligent Power Module (IPM) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. If this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.
Manufacturer’s stated response
Toyota will notify owners, and dealers will replace the IPM free of charge. Owners may contact Toyota at 1-800-331-4331. Vehicles that had their IPM replaced under recall 11V-342 are not affected by this campaign.
Manufacturer campaign: DLF, D0M
Read campaign 13V396000 at NHTSAELECTRICAL SYSTEMCampaign 11V342000
Reported concern
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2007 HIGHLANDER HYBRID AND LEXUS RX400H PASSENGER CARS MANUFACTURED FROM FEBRUARY 16, 2005, THROUGH AUGUST 30, 2006. A MODULE INSIDE THE INVERTER MODULE MAY CONTAIN INADEQUATELY SOLDERED TRANSISTORS THAT DURING HIGH-LOAD DRIVING, MAY BE DAMAGED BY HEAT CAUSED BY THE LARGE CURRENT. IF THIS OCCURS, VARIOUS WARNING LAMPS, INCLUDING THE MALFUNCTION INDICATOR LAMP, SLIP INDICATOR LIGHT, BRAKE SYSTEM WARNING LIGHT, AND MASTER WARNING LIGHT, WILL BE ILLUMINATED ON THE INSTRUMENT PANEL.
Manufacturer’s stated response
TOYOTA/LEXUS MAILED AN INTERIM OWNER NOTIFICATION ON JULY 19, 2011 TO ADVISE OWNERS OF THIS RECALL AND THE FACT THAT THEY WILL RECEIVE A FUTURE NOTICE WHEN PARTS BECOME AVAILABLE TO COMPLETE REPAIRS. TOYOTA DEALERS WILL INSPECT THE HYBRID INVERTER PRODUCTION NUMBER TO DETERMINE WHETHER THE INVERTER CONTAINS SUSPECT TRANSISTORS AND REPLACE THE MODULE FREE OF CHARGE. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Read campaign 11V342000 at NHTSAVEHICLE SPEED CONTROL:ACCELERATOR PEDALCampaign 11V112000
Reported concern
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2006 HIGHLANDER, HIGHLANDER HYBRID, AND MODEL YEAR 2004-2007 LEXUS RX330, RX350, AND RX400H VEHICLES. IF THE FORWARD RETENTION CLIP USED TO SECURE THE FLOOR CARPET COVER, WHICH IS LOCATED IN FRONT OF THE CENTER CONSOLE, IS NOT INSTALLED PROPERLY THE COVER MAY LEAN TOWARD THE ACCELERATOR PEDAL AND INTERFERE WITH THE ACCELERATOR PEDAL ARM.
Manufacturer’s stated response
DEALERS WILL REPLACE THE FLOOR CARPET COVER WITH A NEWLY DESIGNED ONE FREE OR CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING MARCH 2011. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Manufacturer campaign: BOA/BLC
Read campaign 11V112000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
157 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
L-SB-0030-24 Rev2Some 2005 – 2026 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose …NHTSA ID 11027560
Some 2005 – 2026 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: L-SB-0030-24 Rev2
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11027560 at NHTSAL-SB-0030-24 Rev1Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose …NHTSA ID 11007456
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: L-SB-0030-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11007456 at NHTSAL-SB-0030-24 Rev1Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose …NHTSA ID 11006162
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: L-SB-0030-24 Rev1
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11006162 at NHTSAL-SB-0030-24Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose…NHTSA ID 11005121
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: L-SB-0030-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11005121 at NHTSAL-SB-0030-24Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose…NHTSA ID 11005063
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: L-SB-0030-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11005063 at NHTSAL-SB-0023-24To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11003650
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: L-SB-0023-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11003650 at NHTSAL-SB-0024-24The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11003648
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
Campaign / software reference: L-SB-0024-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11003648 at NHTSAL-SB-0022-24Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas suc…NHTSA ID 11003643
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: L-SB-0022-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11003643 at NHTSAL-SB-0021-24Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal…NHTSA ID 11003642
Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
Campaign / software reference: L-SB-0021-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11003642 at NHTSAL-SB-0020-24Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be ident…NHTSA ID 11003641
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Campaign / software reference: L-SB-0020-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11003641 at NHTSAL-SB-0023-24To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather el…NHTSA ID 11003595
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: L-SB-0023-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11003595 at NHTSAL-SB-0024-24The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a p…NHTSA ID 11003593
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
Campaign / software reference: L-SB-0024-24
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11003593 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Pedestrian alert soundsDP22005
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
Recorded closure: Aug 7, 2023
Campaign reference in the source: 22V063000
Find investigation DP22005Hybrid inverter failure - vehicle stallPE11005
In a June 29, 2011 letter to NHTSA, Toyota submitted a Defect Information Report regarding a safety recall of certain Toyota Highlander Hybrid and Lexus RX400h vehicles to address a defect condition with the hybrid inverter assembly (NHTSA Recall No. 11V-342).Toyota's letter identified a defect related to inadequately soldered transistors on the Intelligent Power Module (IPM) of some of the subject vehicles that could result in sudden loss of power while driving.Toyota's remedy procedure instructs dealers to inspect the hybrid inverter production number to determine if the inverter contains suspect transistors.If so, the dealer will replace the IPM.The recall covers approximately 45,528 model year (MY) 2006 and 2007 Toyota Highlander Hybrid vehicles manufactured from February 16, 2005 through August 29, 2006 and approximately 36,745 MY 2006 and 2007 Lexus RX400h vehicles manufactured from February 23, 2005 through August 30, 2006.This Preliminary Evaluation is closed.
Recorded closure: Jul 20, 2011
Campaign reference in the source: 11V342000
Find investigation PE11005Unintended and Uncontrolled AccelerationRQ10003
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested information regarding potential electronic causes of unintended acceleration in Toyota and Lexus vehicles.I. Pedal Interference from Floor mats, Carpet Covers and Plastic Pads in Carpets.During the RQ10-003 investigation, ODI reviewed a large volume of documents to assess whether additional vehicles should be recalled.Following the agency's analysis, NHTSA requested that Toyota recall additional vehicles.Toyota complied with the agency's request.The details of these recalls are set forth more fully in Toyota's reports to NHTSA pursuant to 49 CFR Part 573.These recalls are as follows:Recall 11V-112: (1) model year (MY) 2004-2006 Toyota Highlander and Highlander Hybrid; and, (2) MY 2004-2007 Lexus RX330,RX350, and RX400h (hybrid model). The total estimated population under this recall is 769,379 vehicles.This recall remedies potential accelerator pedal entrapment caused by a loose floor carpet cover (trim panel). Recall 11V-113: (1) MY 2003-2009 through 2009 Toyota 4Runner; (2) MY 2006-2010 Toyota RAV4; and, (3) MY 2008-2011 Lexus LX570.The total estimated population under this recall is 1,381,000 vehicles.This recall supplements recall 09V-388 and remedies potential accelerator pedal entrapment by an unsecured floor mat.Recall 11V-115: (1) MY 2006-2007 Lexus GS300 (all wheel drive vehicles); and, (2) MY 2006-2007 Lexus GS350 (all wheel drive vehicles). The total estimated population under this recall is 19,647 vehicles.This recall remedies potential accelerator pedal entrapment caused by inadequate clearance between the pedal linkage and a plastic pad embedded in the vehicle's carpet.II. Potential Electronic Causes of Unintended Acceleration.After NHTSA opened RQ10-003, NHTSA launched a ten-month study of potential electronic causes of unintended acceleration in Toyota vehicles.NHTSA launched the study in the spring of 2010 in light of concerns aired in Congressional hearings.NHTSA enlisted engineers at the National Aeronautics and Space Administration (NASA) with expertise in areas such as computer controlled electronic systems, electromagnetic interference and software integrity to assess whether electronic systems or electromagnetic interference played a role in incidents of unintended acceleration in Toyota vehicles.That study has concluded.Two reports are associated with the study and are available on NHTSA's website.NASA's report is entitled Technical Support to the National Highway Traffic Safety Administration (NHTSA) on the Reported Toyota Motor Corporation (TMC) Unintended Acceleration (UA) Investigation, NESC Assessment No. TI-10-00618 (Jan. 18, 2011).NHTSA's report is entitled Technical Assessment of Toyota Electronic Throttle Control (ETC) Systems (Feb. 2011).Both reports should be read in conjunction with each other. As stated in its report, NASA did not find an electronic cause of large throttle openings that can result in unintended acceleration incidents. NHTSA did not find a vehicle-based cause of unintended acceleration incidents other than the physical pedal interference causes that are being addressed by Toyota's recalls. This RQ is closed.
Recorded closure: Mar 1, 2011
Campaign reference in the source: 11V115000
Find investigation RQ10003Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.