The vehicle dossier US · 2019
2019 Kia
OPTIMAProblems & recalls
208 distinct owner reports in the NHTSA snapshot. Other components appears in 92 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 208 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 8 years with reports.
30,224 miles is the median among 52 reports with usable mileage. The middle half spans 9,200–70,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
1 recall campaign on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKINGCampaign 19V539000
Reported concern
Kia Motors America (Kia) is recalling certain 2019 Optima vehicles equipped with Gamma 1.6L Turbo-GDI or Theta II 2.0L Turbo-GDI engines. A software error in the Forward Collision-Avoidance Assist (FCA) system may cause the braking assist function to not engage when a stationary vehicle is detected.
Manufacturer’s stated response
Kia will notify owners, and dealers will update the FCA software, free of charge. The recall began August 27, 2019. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC179.
Manufacturer campaign: SC179
Read campaign 19V539000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
123 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
CS2312_TSB_R2TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bul…NHTSA ID 11034003
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Campaign / software reference: CS2312
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11034003 at NHTSASC340_TSB_R5VOLUNTARY EMISSIONS SERVICE CAMPAIGN: THETA II 2.4L GDI EMISSIONS: ECM LOGIC IMPROVEMENT (SC340 REVISION 5) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated…NHTSA ID 11031854
VOLUNTARY EMISSIONS SERVICE CAMPAIGN: THETA II 2.4L GDI EMISSIONS: ECM LOGIC IMPROVEMENT (SC340 REVISION 5) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to upgrade the Electronic Control Module ‘ECM’ system software for certain 2016-2020MY Optima, 2016-2020MY Sorento, 2017-2022MY Sportage vehicles equipped with 2.4L Theta II engines listed in the table below. Kia has become aware that certain 2016-2022MY vehicles equipped with 2.4L Theta II engines may have engine calibrations that were not optimized for emissions standards under certain specific conditions. These calibrations may cause the vehicle to release air pollutants which exceed Federal and California standards. These standards were established to protect your health and welfare from the dangers of air pollution.
Campaign / software reference: SC340
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11031854 at NHTSASC340_OWNR_JF&JFA_104VOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER NOTIFICATION (SC340 FLIGHT 104 ) - This document is the owner notification advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software log…NHTSA ID 11030390
VOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER NOTIFICATION (SC340 FLIGHT 104 ) - This document is the owner notification advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) for certain 2016-2020 MY Optima vehicles equipped with 2.4L Gas Direct Injection (GDI) engines to ensure compliance with emissions regulations.
Campaign / software reference: SC340
Components: ELECTRICAL SYSTEM · ENGINE. Confirm detailed applicability in the original document.
Source record 11030390 at NHTSASC340_TSB_R4TECHNICAL SERVICE BULLETIN: VOLUNTARY EMISSIONS SERVICE CAMPAIGN: THETA II 2.4L GDI EMISSION SECM LOGIC IMPROVEMENT (SC340 REV 4) - This bulletin has been revised to include additional information. New/revised sections of this …NHTSA ID 11029979
TECHNICAL SERVICE BULLETIN: VOLUNTARY EMISSIONS SERVICE CAMPAIGN: THETA II 2.4L GDI EMISSION SECM LOGIC IMPROVEMENT (SC340 REV 4) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to upgrade the Electronic Control Module ‘ECM’ system software for certain 2016-2022MY vehicles equipped with 2.4L Theta II engines listed in the table below. Kia has become aware that certain 2016-2022MY vehicles equipped with 2.4L Theta II engines may have engine calibrations that were not optimized for emissions standards under certain specific conditions. These calibrations may cause the vehicle to release air pollutants which exceed Federal and California standards. These standards were established to protect your health and welfare from the dangers of air pollution.
Campaign / software reference: SC340
Components: ELECTRICAL SYSTEM · ENGINE. Confirm detailed applicability in the original document.
Source record 11029979 at NHTSATSB_CS2312_R1TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bul…NHTSA ID 11028908
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whole Integrated Body control Unit (IBU) / Body Control Module (BCM) did receive the Ant-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Campaign / software reference: CS2312
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11028908 at NHTSASC340_OWNR_JF103VOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER NOTIFICATION (SC340 FLIGHT 103 / JF) - This document is the owner notification advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software…NHTSA ID 11026899
VOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER NOTIFICATION (SC340 FLIGHT 103 / JF) - This document is the owner notification advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) for certain 2016-2020 MY Optima vehicles equipped with 2.4L Gas Direct Injection (GDI) engines to ensure compliance with emissions regulations.
Campaign / software reference: SC340
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11026899 at NHTSATSB_CS2312TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on cer…NHTSA ID 11026825
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 19, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Campaign / software reference: CS2312
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11026825 at NHTSACS2312_OWNRCUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION (CS2312) - This document is the owner notification advising that Kia is conducting Customer Satisfaction Campaign. A software upgrade that addresses the social media theft meth…NHTSA ID 11026980
CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION (CS2312) - This document is the owner notification advising that Kia is conducting Customer Satisfaction Campaign. A software upgrade that addresses the social media theft method has been made available to owners of eligible Kia model vehicles free of charge at authorized Kia dealers since 2023. In addition to the anti-theft software, a new zinc-reinforced ignition cylinder protector hardware upgrade has been developed and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because the subject Kia vehicles were not factory-equipped with an engine immobilizer and were previously eligible for the software upgrade, these vehicles are eligible until March 31, 2027, to have the ignition cylinder protector installed—if requested—at no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 17, 2025 through February 27, 2026)
Campaign / software reference: CS2312
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11026980 at NHTSASC340_TSB_R3TECHNICAL SERVICE BULLETIN: VOLUNTARY EMISSIONS SERVICE CAMPAIGN: THETA II 2.4L GDI EMISSIONS ECM LOGIC IMPROVEMENT (SC340) - This bulletin has been revised to include additional information. New/revised sections of this bullet…NHTSA ID 11026533
TECHNICAL SERVICE BULLETIN: VOLUNTARY EMISSIONS SERVICE CAMPAIGN: THETA II 2.4L GDI EMISSIONS ECM LOGIC IMPROVEMENT (SC340) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to upgrade the Electronic Control Module ‘ECM’ system software for certain 2016-2022MY vehicles equipped with 2.4L Theta II engines listed in the table below. Kia has become aware that certain 2016-2022MY vehicles equipped with 2.4L Theta II engines may have engine calibrations that were not optimized for emissions standards under certain specific conditions. These calibrations may cause the vehicle to release air pollutants which exceed Federal and California standards. These standards were established to protect your health and welfare from the dangers of air pollution.
Campaign / software reference: SC340
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11026533 at NHTSAPS797PITSTOP: TECHNICAL OPERATIONS: EXTERNAL DAMAGE TO ULTRASONIC SENSOR: This Pitstop provides information related to Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver …NHTSA ID 11026698
PITSTOP: TECHNICAL OPERATIONS: EXTERNAL DAMAGE TO ULTRASONIC SENSOR: This Pitstop provides information related to Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a “Warning Lamp’ to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)
Components: BACK OVER PREVENTION: WARNINGS. Confirm detailed applicability in the original document.
Source record 11026698 at NHTSASC340_OWNR_JF101VOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER NOTIFICATION (SC340 FLIGHT 101 / JF) - This document is the owner notification advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software…NHTSA ID 11025897
VOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER NOTIFICATION (SC340 FLIGHT 101 / JF) - This document is the owner notification advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) for certain 2016-2020 MY Optima vehicles equipped with 2.4L Gas Direct Injection (GDI) engines to ensure compliance with emissions regulations.
Campaign / software reference: SC340
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11025897 at NHTSASC340_TSB_R2TECHNICAL SERVICE BULLETIN: VOLUNTARY EMISSIONS SERVICE CAMPAIGN: THETA II 2.4L GDI EMISSIONS ECM LOGIC IMPROVEMENT (SC340) - This bulletin has been revised to include additional information. New/revised sections of this bullet…NHTSA ID 11025892
TECHNICAL SERVICE BULLETIN: VOLUNTARY EMISSIONS SERVICE CAMPAIGN: THETA II 2.4L GDI EMISSIONS ECM LOGIC IMPROVEMENT (SC340) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to upgrade the Electronic Control Module ‘ECM’ system software for certain 2016-2022MY vehicles equipped with 2.4L Theta II engines listed in the table below. Kia has become aware that certain 2016-2022MY vehicles equipped with 2.4L Theta II engines may have engine calibrations that were not optimized for emissions standards under certain specific conditions. These calibrations may cause the vehicle to release air pollutants which exceed Federal and California standards. These standards were established to protect your health and welfare from the dangers of air pollution.
Campaign / software reference: SC340
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11025892 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Loss of Motive PowerDP22003
The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles spanning Model Years (MY) 2005-2021. The Petitioners cited examples of complaints indicating that the subject vehicles were experiencing rapid loss of engine oil due to oil drain plug back outs, resulting in loss of motive power and/or catastrophic engine damage. Additional complaints were provided which alleged that the oil drain pans lack sufficient structural integrity and are susceptible to cracking. The petition itself can be reviewed at NHTSA.gov under ODI number 11481745. On September 12, 2022, the Office of Defects Investigation (ODI) opened Defect Petition (DP22-003) to evaluate the Petitioners’ request. The Petitioners have provided additional complaints within four supplemental letters dated January 31, 2023, March 21, 2023, May 23, 2023, and August 4, 2023. ODI’s evaluation included the review and analysis of the complaints and supporting information submitted by the Petitioners, as well as additional complaints submitted directly to NHTSA which referenced either the oil drain plug or a crack in the oil pan. After reviewing the available data, ODI has not identified evidence that would support opening a defect investigation into the oil drain pan assemblies of the subject vehicles. Based on a review of the available information, a loss of motive power resulting from an oil drain plug back out has not occurred between the initial sale of a vehicle and the completion of its first oil change. If during an oil change service, a technician fails to remove the existing drain plug gasket before installing a new gasket, it is likely that a proper seal between the drain plug and the oil pan will not be made. An improper seal between the drain plug and oil pan could lead to the backing out on the drain plug, resulting in the sudden loss of oil while driving. Additionally, the provided examples of oil pan cracks were localized to the immediate vicinity of the oil drain plug and/or appeared to be the result of direct-contact with a tool during servicing. There is no information to support that a vehicle-based defect exists relating to the oil pan assembly, and instead the documented incidents are related to the failure to follow the proper maintenance procedures during oil change service. In October 2023, Hyundai published a Technical Service Bulletin (TSB) that provided detailed instructions for oil change service on its gasoline powered vehicles, specifically highlighting the need to remove and replace the existing drain plug gasket prior to reinstalling the drain plug. After a thorough review of the material submitted by the petitioner, the information already in NHTSA's possession, and the potential risks to motor vehicle safety implicated by the petitioners' allegations, NHTSA does not believe that a formal investigation is warranted. Therefore, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA’s reasons for denial of the petition will be published. The reference numbers for the complaints to NHTSA cited by the petitioner can be found in the petition submission documents in the public file for DP22-003. To review those complaints and the additional complaints ODI added to its evaluation which are cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Recorded closure: Dec 12, 2023
Find investigation DP22003Electrical overstressEA19001
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.
Recorded closure: Sep 19, 2024
Campaign reference in the source: 20V024
Find investigation EA19001Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.