The vehicle dossier US · 2008

2008 Jeep
WRANGLERProblems & recalls

873 distinct owner reports in the NHTSA snapshot. Air bags appears in 309 of them. Explore what was reported—and which official actions are on file.

Snapshot Sep 28, 2026Live NHTSA complaint API How this dossier is compiled

01 / Owner-reported evidence

What owners reported.

Categories attached to 873 distinct reports. A report can mention more than one component, so category totals can overlap.

Air bags309 reports
Electrical system178 reports
Steering156 reports
Other components142 reports
Fuel system140 reports
Suspension108 reports
Transmission & drivetrain67 reports
Brakes50 reports
Engine48 reports
Visibility24 reports
Body & structure16 reports
See original component labels
AIR BAGS305
ELECTRICAL SYSTEM174
STEERING156
SUSPENSION105
FUEL SYSTEM, GASOLINE70
FUEL/PROPULSION SYSTEM69
POWER TRAIN59
SERVICE BRAKES38
UNKNOWN OR OTHER37
ENGINE37
WHEELS28
VISIBILITY/WIPER24
ELECTRONIC STABILITY CONTROL (ESC)22
VEHICLE SPEED CONTROL20
EXTERIOR LIGHTING19
STRUCTURE:BODY15
SERVICE BRAKES, HYDRAULIC11
ENGINE AND ENGINE COOLING10
EQUIPMENT6
POWER TRAIN:AUTOMATIC TRANSMISSION5
SEAT BELTS5
AIR BAGS:FRONTAL4
SUSPENSION:FRONT3
POWER TRAIN:MANUAL TRANSMISSION3
TIRES3
LATCHES/LOCKS/LINKAGES:HOOD:LATCH2
PARKING BRAKE2
ELECTRICAL SYSTEM:HORN2
EQUIPMENT ADAPTIVE/MOBILITY2
TRAILER HITCHES2
SEATS2
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP1
STRUCTURE:BODY:HOOD1
LATCHES/LOCKS/LINKAGES1
VEHICLE SPEED CONTROL:ACCELERATOR PEDAL1
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS1
WHEELS:LUGS/NUTS/BOLTS/STUDS1
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY1
EXTERIOR LIGHTING:HEADLIGHTS1
POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT1
ELECTRICAL SYSTEM:IGNITION:SWITCH1
ELECTRICAL SYSTEM:STARTER ASSEMBLY1
AIR BAGS:FRONTAL:DRIVER CLOCKSPRING/SPIRAL CASSETTE1
ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION1
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING1

These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.

The reporting timeline

When reports arrived.

Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.

Year filed (last two digits)Latest report: Jul 14, 2026
Mileage, where supplied

62,000 miles is the median among 723 reports with usable mileage. The middle half spans 41,000–90,000 miles.

This describes the submitted reports. It does not predict when a vehicle will fail.

02 / Official safety campaigns

9 recall campaigns on file.

A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.

May 24, 2016 Safety recallAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULECampaign 16V352000

A do-not-drive advisory is recorded. Verify applicability immediately with NHTSA or the manufacturer.

Reported concern

Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2012 Jeep Wrangler, 2008-2012 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2012 Chrysler 300, 2006-2012 Dodge Charger, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AL, CA, FL, GA, HI, LA, MS, SC, TX, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Chrysler is also recalling 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2009 RAM 3500 Cab Chassis, 2008-2009 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2009 Jeep Wrangler, 2008-2009 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2009 Chrysler 300, 2006-2009 Dodge Charger, 2005-2009 Dodge Dakota and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AZ, AR, DE, Washington D.C., IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Chrysler is recalling certain 2005-2008 RAM 2500, 2006-2008 RAM 3500, 2007-2008 RAM 3500 Cab Chassis, 2008 RAM 4500 and 5500 Cab Chassis, 2004-2008 Dodge Durango, 2007-2008 Chrysler Aspen, 2007-2008 Jeep Wrangler, 2008 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2008 Chrysler 300, 2006-2008 Dodge Charger, 2005-2008 Dodge Dakota, and 2006-2008 Mitsubishi Raider vehicles originally sold, or registered, in AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY.

Manufacturer’s stated response

Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.

Manufacturer campaign: S43

Read campaign 16V352000 at NHTSA
May 11, 2016 Safety recallAIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULECampaign 16V290000

Reported concern

Chrysler (FCA US LLC) is recalling certain model year 2007-2010 Jeep Wrangler JK vehicles manufactured March 2, 2006, to August 13, 2010. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.

Manufacturer’s stated response

Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on December 14, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S33.

Manufacturer campaign: S33

Read campaign 16V290000 at NHTSA
May 7, 2013 Safety recallAIR BAGSCampaign 13V176000

Reported concern

Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 Jeep Wrangler right-hand drive vehicles manufactured February 1, 2007, through October 10, 2011. The affected vehicles have airbag clockspring assemblies that could experience broken airbag circuits.

Manufacturer’s stated response

Chrysler will notify owners, and dealers will replace the clockspring and add a steering wheel dust shield, free of charge. The recall began on June 10, 2013. Owners may contact Chrysler at 1-800-247-9753. This recall supercedes NHTSA recall 11V-528. Chrysler's recall campaign number is M31.

Manufacturer campaign: M31

Read campaign 13V176000 at NHTSA
Feb 25, 2013 Safety recallEQUIPMENTCampaign 13E010000

Reported concern

Quadratec, Inc. is recalling certain aftermarket accessory, driver-side, Ultimate Floor Liners part numbers 14254.0301 07, 14254.0301 08, 14254.0301Q, 14254.0302 07, 14254.0302 08, 14254.0302Q, 14254.0303 07, 14254.0303 08, 14254.0303Q, 14254.0309 07, 14254.0309 08, and 14254.0309Q sold from May 1, 2012, through February 14, 2013. The liners are for use in 2007-2013 Jeep Wranglers. The anchor point for the affected floor liners may tear during use, particularly when exposed to high temperatures. The tearing may allow the floor liner to shift forward.

Manufacturer’s stated response

Quadratec will notify owners and either exchange the liners or provide them with a hook guard kit to help secure the driver-side mat, free of charge. The recall began on April 4, 2013. Owners may contact Quadratec at 1-800-463-2998 or info@quadratec.com.

Manufacturer campaign: 13-01

Read campaign 13E010000 at NHTSA
Nov 2, 2011 Safety recallAIR BAGS:FRONTALCampaign 11V528000

Reported concern

CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2012 RIGHT HAND DRIVE (RHD) JEEP WRANGLER VEHICLES MANUFACTURED FROM FEBRUARY 1, 2007, THROUGH OCTOBER 10, 2011. SOME VEHICLES MAY BE EQUIPPED WITH DRIVER'S AIRBAG CLOCKSPRING ASSEMBLIES THAT COULD EXPERIENCE A COMPROMISED AIRBAG CIRCUIT RESULTING IN AN AIRBAG LAMP ILLUMINATION, WHICH INDICATES THAT THE AIRBAG MAY NOT DEPLOY.

Manufacturer’s stated response

CHRYSLER WILL NOTIFY OWNERS AND REMEDY THE VEHICLES AS NECESSARY FREE OF CHARGE. CHRYSLER WILL MAIL TO OWNERS AN INTERIM NOTIFICATION DURING MARCH 2012. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

Manufacturer campaign: L37

Read campaign 11V528000 at NHTSA
Jun 3, 2010 Safety recallSERVICE BRAKES, HYDRAULICCampaign 10V236000

Reported concern

CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2010 JEEP WRANGLER LEFT AND RIGHT HAND DRIVE PASSENGER VEHICLES MANUFACTURED FROM MAY 15, 2006 THROUGH APRIL 22, 2010. THERE MAY BE CONTACT BETWEEN THE RIGHT AND LEFT FRONT INNER FENDER LINERS AND THE RIGHT FRONT AND LEFT REAR BRAKE TUBES WHICH COULD CAUSE WEAR OF THE TUBES CAUSING A BRAKE FLUID LEAK.

Manufacturer’s stated response

CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.

Manufacturer campaign: K13

Read campaign 10V236000 at NHTSA
Nov 5, 2009 Safety recallPOWER TRAIN:AUTOMATIC TRANSMISSIONCampaign 09V436000

Reported concern

CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2008 JEEP WRANGLER VEHICLES MANUFACTURED FROM JUNE 2006 THROUGH JULY 2008, EQUIPPED WITH AUTOMATIC TRANSMISSIONS. THESE VEHICLES WERE NOT EQUIPPED WITH A TRANSMISSION FLUID TEMPERATURE WARNING SYSTEM.

Manufacturer’s stated response

DEALERS WILL INSPECT AND INSTALL A "HOTOIL" MESSAGE IN THE INSTRUMENT CLUSTER AND A CHIME INDICATING AN ELEVATED TRANSMISSION FLUID CONDITION. THE RECALL BEGAN ON FEBRUARY 22, 2010. OWNERS MAY CONTACT CHRYSLER AT 1-800-835-1403.

Manufacturer campaign: J30

Read campaign 09V436000 at NHTSA
Jul 9, 2009 Safety recallEQUIPMENTCampaign 09E044000

Reported concern

CHRYSLER IS RECALLING 308 AFTERMARKET MOPAR TOW BAR ASSEMBLIES, P/N 82209758, SOLD DURING 2007 AND 2008 CALENDAR YEAR WHICH ARE USED TO TOW MODEL YEAR 2007 AND 2008 JEEP WRANGLER VEHICLES.

Manufacturer’s stated response

CHRYSLER WILL NOTIFY THE OWNERS OF ALL 2007 AND 2008 MODEL YEAR JEEP WRANGLER VEHICLES WHO COULD HAVE PURCHASED A RECALLED TOW BAR AND WILL REPLACE THE TOW BARS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 23, 2009. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

Manufacturer campaign: J24

Read campaign 09E044000 at NHTSA
May 6, 2008 Safety recallSERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGSCampaign 08V202000

Reported concern

CHRYSLER IS RECALLING 1,585 MY 2007-2008 JEEP WRANGLER, RIGHT HAND DRIVE ONLY, VEHICLES. SOME VEHICLES MAY HAVE INSUFFICIENT CLEARANCE BETWEEN THE STEERING INTERMEDIATE SHAFT AND REAR BRAKE TUBES.

Manufacturer’s stated response

DEALERS WILL INSTALL A REVISED BRAKE TUBE CLIP TO RETAIN THE TUBES, INSPECT THE BRAKE TUBES FOR DAMAGE DUE TO POTENTIAL CONTACT WITH THE STEERING INTERMEDIATE SHAFT, AND REPLACE THE BRAKE TUBES IF NECESSARY. THE RECALL BEGAN ON JUNE 30, 2008. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

Manufacturer campaign: H17

Read campaign 08V202000 at NHTSA
Check this car’s VIN at NHTSA

03 / The manufacturer’s record

Instructions. Updates. Responses.

95 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.

Sep 18, 2025 Service Bulletin/Repair Instructions107418SWITCH - CLUTCH STARTER INTERLOCK & MASTER CYLINDER ASSEMBLY - CLUTCHNHTSA ID 11023612

SWITCH - CLUTCH STARTER INTERLOCK & MASTER CYLINDER ASSEMBLY - CLUTCH

Components: SERVICE BRAKES. Confirm detailed applicability in the original document.

Source record 11023612 at NHTSA
Aug 15, 2025 Service Bulletin/Repair Instructions9100653Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.NHTSA ID 11022027

Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.

Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 11022027 at NHTSA
Aug 15, 2025 Service Bulletin/Repair Instructions9100645Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.NHTSA ID 11022026

Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.

Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 11022026 at NHTSA
Apr 2, 2025 Service Bulletin/Repair Instructions103954ACTUATOR - A/C AND HEATERNHTSA ID 11017445

ACTUATOR - A/C AND HEATER

Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 11017445 at NHTSA
Apr 2, 2025 Service Bulletin/Repair Instructions104087ACTUATOR - A/C AND HEATERNHTSA ID 11017435

ACTUATOR - A/C AND HEATER

Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 11017435 at NHTSA
Oct 30, 2024 Service Bulletin/Repair Instructions101232Plate - PlanetaryNHTSA ID 11010205

Plate - Planetary

Components: POWER TRAIN. Confirm detailed applicability in the original document.

Source record 11010205 at NHTSA
Sep 15, 2023 Service Bulletin/Repair Instructions9100226Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that…NHTSA ID 10248509

Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.

Source record 10248509 at NHTSA
Sep 15, 2023 Service Bulletin/Repair Instructions9100226Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that…NHTSA ID 10244348

Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

Components: ELECTRICAL SYSTEM:WIRING. Confirm detailed applicability in the original document.

Source record 10244348 at NHTSA
May 26, 2021 Service Bulletin/Repair Instructions9004378KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button…NHTSA ID 10229998

KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button press versus the original single (1x) button press to cancel the remote start function and turn the vehicle off.

Components: PARKING BRAKE · SEAT BELTS. Confirm detailed applicability in the original document.

Source record 10229998 at NHTSA
May 26, 2021 Service Bulletin/Repair Instructions9004378KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button…NHTSA ID 10223386

KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button press versus the original single (1x) button press to cancel the remote start function and turn the vehicle off.

Components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. Confirm detailed applicability in the original document.

Source record 10223386 at NHTSA
May 26, 2021 Service Bulletin/Repair Instructions9004378KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button…NHTSA ID 10223226

KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button press versus the original single (1x) button press to cancel the remote start function and turn the vehicle off.

Components: PARKING BRAKE · SEAT BELTS. Confirm detailed applicability in the original document.

Source record 10223226 at NHTSA
May 26, 2021 Service Bulletin/Repair Instructions9004378KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button…NHTSA ID 10198300

KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button press versus the original single (1x) button press to cancel the remote start function and turn the vehicle off.

Components: EQUIPMENT. Confirm detailed applicability in the original document.

Source record 10198300 at NHTSA
Browse all manufacturer records by page

Records below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.

04 / Agency investigations

Official inquiries.

An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.

Opened Sep 17, 2021 No close date recordedDesiccated Air Bag Inflator RuptureEA21002

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Find investigation EA21002
Opened Dec 4, 2015 ClosedAir Bag Clockspring Wiring FailureEA15007

On May 10, 2016, Fiat Chrysler America (FCA) submitted a Part 573 Defect Information Report announcing NHTSA recall 16V290 involving 394,258 model year (MY) 2007-2010 Jeep Wrangler vehicles.Under the recall FCA will replace the clockspring and install a steering wheel back cover and steering wheel column shroud.This recall also includes approx. 4,524 MY2007-2010 right hand drive (RHD) Jeep Wrangler vehicles commonly used for rural postal delivery services.In addition 7,180 MY 2011-2016 right hand drive Jeep Wrangler vehicles were also recalled under 16V288, the same remedy repair will be used.Upon review of the 1,942 MY 2007-2010 Jeep Wrangler consumer complaints, 17,195 warranty reports and field returned parts assessment, FCA concluded that a defect exists in the driver side clockspring assembly, a device that both connects (electrically) the driver air bag to the control module and allows rotational movement between the steering wheel and fixed steering column.Clockspring failure may compromise the air bag circuit causing illumination of the air bag warning lamp, and may result in non-deployment of the driver air bag in a frontal crash.FCA identified a contributing factor in that the recalled vehicles may be subjected to off-road dusty environments and/or usage with the vehicle roof top/doors removed thus allowing dust and moisture to enter the clockspring assembly.FCA advised that the MY 2011 and later Wrangler vehicles had an improved steering column cover/shroud that may reduce the amount of dirt/moisture that can enter the clockspring assembly.During the investigation FCA and the Office of Defects Investigation (ODI) also reviewed 193 MY 2011-2012 Jeep Wrangler consumer complaints, 3,918 warranty reports and field returned parts along with reports from other FCA vehicles that use the same clockspring assembly.Based on this review, the rate of repair and the failure mode does not indicate a defect trend at this time in the later MY Wrangler or other FCA vehicles.During the field return parts review, FCA found a significant number of MY 2011-2012 Wrangler returned parts that operated normally, the so called ?no trouble found? or NTF parts where no fault could be identified through bench testing.On June 10, 2016, FCA informed ODI of its intention to conduct a 15-yr, 150k mile extended warranty program due to the NTF issue and the MY 2011 and later vehicles having a somewhat elevated level of warranty replacement.Consumers will be notified of the program in writing.FCA will collect clocksprings replaced under the warranty extension program to further examine and study the root cause failure.ODI will monitor FCA?s analysis to determine if any further field action is warranted.Based on the actions taken by FCA to recall the MY 2007-2010 Jeep Wrangler vehicles and the MY 2008-2016 right hand drive Wrangler vehicles, this investigation is closed.FCA has also agreed to conduct a warranty extension and further evaluation of the MY 2011-2016 Wrangler.At the time of FCA's field data submission in PE 15-025 (September 2015), ODI was aware of a total of 416 MY 2007-2010 and 23 MY 2011-2012 VOQs relevant to this issue.In addition, there have been an additional 90 and 16 VOQs (respectively) received since the recall announcement (i.e., thru May 2016).The reports noted above can be viewed at SaferCar.gov under the reference (ODI) numbers cited on the attached listing.

Recorded closure: Jul 6, 2016

Campaign reference in the source: 16V290000

Find investigation EA15007
Opened Jun 19, 2015 ClosedAir Bag Clockspring Wiring FailurePE15025

In it's response to ODI's PE15-025 Information Request letter, FCA identified 1,703 consumer complaints, field reports and legal claims responsive to the subject defect condition on the subject Wrangler vehicles.Six of these reports alleged an air bag non-deployment in a crash in which either the air bag warning light was allegedly on or came on afterward the crash, one of which also alleged injuries as a result of the non-deployment.FCA also provided data on other make, model and model year vehicles using the same clockspring.Additionally FCA provided 16,955 warranty claims related to the replacement of the air bag clockspring wiring assembly.It should be noted that FCA initiated an Extended Warranty Program on the left hand drive MY 2007 Wrangler in late calendar year 2011.6,777 of these claims are from the MY 2007 left hand drive Wrangler.FCA advises that some of the warranty claims involved clockspring failures that would not affect the air bag operation, for example due to noise, cruise control and/or radio operation issues.Many of these claims involved newer model year subject vehicles.FCA also noted that Wrangler's removable roof and door configuration may make it more susceptible to outdoor water/moisture and dust ingress.ODI investigated the right hand drive Wrangler in calender year 2011 for a similar clockspring issue under PE11-019.That investigation lead to NHTSA Safety Recall 11V258 on right hand drive model year (MY) 2008-2012 Wranglers.FCA redesigned the remedy clockspring to improve its durability and environmental protection and revised the design of the steering wheel to column shroud.Base on the data reviewed, this Preliminary Analysis (PE) is being upgraded to an Engineering Analysis (EA).The reports cited above are listed in the public investigative file available at SaferCar.gov under this investigation ID.

Recorded closure: Dec 7, 2015

Find investigation PE15025
Opened Sep 25, 2014 ClosedTotally Integrated Power Module FailureDP14004

In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007 model year. The petitioner alleges that TIPM defects may result in engine stall, airbag non-deployment, failure of fuel pump shutoff resulting in unintended acceleration, fire, and other symptoms. On September 25, 2014, the Office of Defects Investigation (ODI) opened DP14-004 to evaluate the petition for a grant or deny decision. ODI analyzed complaint data provided by CAS as well as complaints submitted to ODI from consumers. In total, there were 296 complaints submitted by the petitioner in the original petition and five supplements, including 271 complaints related to the subject vehicles equipped with TIPM-7. Approximately 3 percent of CAS complaints are related to vehicles equipped with TIPM-6 and ODI?s review of these complaints did not identify any safety defect trends. ODI conducted a detailed review of complaints narratives submitted by CAS and consumers including careful analysis of vehicle repair histories, warranty claims obtained from the manufacturer and any available Customer Assistance Inquiry reports (CAIR). Analysis of the field data indicated that MY2011-2013 Jeep Grand Cherokee and Dodge Durango vehicles exhibited significantly higher complaint rates related to fuel pump relay (FPR) failures than other subject vehicles. In a September 3, 2014 letter to NHTSA, Chrysler submitted a Defect Information Report (DIR) identifying a defect in the FPR within the TIPM-7 which can result in a no start or stall condition in approximately 188,723 model year (MY) 2011 Jeep Grand Cherokee (WK) and Dodge Durango (WD) vehicles manufactured from January 5, 2010 through July 20, 2011 (14V-530).In a February 24, 2015 letter, Chrysler submitted a second DIR expanding the scope of the FPR defect condition to include an additional 338,216 MY 2012 through 2013 Jeep Grand Cherokee vehicles manufactured from September 17, 2010 through August 19, 2013 and MY 2012 through 2013 Dodge Durango vehicles manufactured from January 18, 2011 through August 19, 2013 (15V-115).ODI analysis of the CAS allegations of TIPM defects resulting in stall while driving, airbag non-deployment, unintended acceleration, fire and other faults identified a single defect condition related to 1 of over 60 different circuits in the TIPM assembly. The most common effect of this defect condition, related to the fuel pump relay, was a no-start concern, but it could also result in stall while driving (76 complaints). No valid evidence was presented in support of claims related to airbag non-deployment, unintended acceleration or fire resulting from TIPM faults and these claims were found to be wholly without merit based on review of the field data and design of the relevant systems and components.Except insofar as the petitioner's contentions relate to the defect condition addressed by the Chrysler recalls, the factual bases of the petitioner's contentions that any further investigation is necessary are unsupported. In our view, additional investigation is unlikely to result in a finding that a defect related to motor vehicle safety exists or a NHTSA order for the notification and remedy of a safety-related defect as alleged by the petitioner at the conclusion of the requested investigation. Therefore, in view of the need to allocate and prioritize NHTSA's limited resources to best accomplish the agency's safety mission, the petition is den

Recorded closure: Jul 24, 2015

Find investigation DP14004
Opened May 23, 2011 ClosedAirbag Clockspring FailurePE11019

In its July 29, 2011 response to ODI's May 27, 2011 information request letter, Chrysler provided 153 MY 2007-2008 owner reports, additional to the 28 ODI Vehicle Owner Questionnaires (VOQs), which related to the illumination of the air bag light (ABL) due to a faulty clockspring (CS) wiring circuit.The right hand drive (RHD) vehicles, which were first produced in MY 2008 and account for only 1% of vehicle production, accounted for 82 of these 181 reports (45%).The MY2007 left hand drive (LHD) vehicle accounted for 61 of the remaining 92 LHD reports and exhibited a higher complaint rate than the MY 2008 LHD vehicles.ODI did not identify any incidents of crashes/injuries attributable to the CS circuit failure.Since May 27, 2011, ODI has received another 32 consumer complaints bringing the total to 213 reports at this closing.In addition, and for comparative purposes, Chrysler provided another 42 owner reports it received on the MY2006 and MY2009-2010 Wrangler vehicles; these populations showed a lower incident rate than the subject vehicles, especially in comparison to the RHD subject vehicles. Chrysler's investigation showed that the higher rate of RHD Wrangler CS failures were due to a more severe duty cycle for these vehicles which are primarily used by US Postal workers/mail carriers delivering mail in rural regions.Chrysler concluded the unique vehicle usage, much of which occurs with the driver's window open and under dusty environmental conditions, is the cause of premature CS failure.Chrysler's analysis also indicated that the somewhat elevated MY2007 LHD rate, which showed a declining failure trend, was the result of start-up production/assembly issues that occurred with the introduction of a new design CS.The new design CS incorporated both dual airbag inflator circuitry and a steering wheel angle sensor (for the electronic stability control system).On November 1, 2011, Chrysler submitted a defect notice indicating it will conduct a recall of all MY 2008-2012 RHD Wrangler vehicles (11V528).The estimated 5,334 RHD Wrangler vehicles include the 2,297 MY 2008 RHD Wrangler vehicles, which were the subject of this investigation, plus an additional 3,037 MY 2009-2012 RHD Wrangler vehicles that Chrysler determined potentially have a similar CS concern as the MY 2008 RHD vehicles.Chrysler intends to replace the existing CS with a yet-to-be-produced improved CS assembly, or an improved steering housing assembly that is less susceptible to dusty environments.Owner notice is scheduled to begin in November, 2011.Chrysler also informed ODI that it intends to initiate a consumer satisfaction campaign for MY2007 LHD Wrangler which will extend the CS warranty coverage for 10 years or 150,000 miles.Accordingly the investigation is closed.

Recorded closure: Nov 7, 2011

Campaign reference in the source: 13V176000

Find investigation PE11019
Opened Aug 23, 2010 ClosedFuel Spill During RefuelingPE10032

ODI found the rate of warranty claims related to fuel spit back on the subject vehicles is lower than other vehicles previously recalled to correct defects related to fuel spit back.Although the rate of complaints reported to the agency on the subject vehicles is higher than or similar to the rates experienced in previous investigations where safety recalls were conducted, ODI suspects that the NHTSA safety complaints submitted by subject vehicles owners may have been influenced by internet related publicity both before and during this investigation.A safety-related defect trend has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.See attached report for additional information.In addition, Chrysler is initiating a lifetime warranty program, at no cost to the consumer, to address the fuel spit back problem in approximately 135,000 model year 2007-2008 Jeep Wrangler vehicles built from March 1, 2007 to March 31, 2008.Chrysler will notify all affected vehicle owners of this action.Consumers should refer to the warranty and service bulletins and sample owner notification letter available in the investigative file.The vehicle build date can be found on the certification label located on the driver door or door jamb.

Recorded closure: Feb 16, 2011

Find investigation PE10032
Opened Aug 12, 2009 ClosedTRANSMISSION OVERHEATING / FIREPE09037

IN A LETTER DATED NOVEMBER 3, 2009, CHRYSLER GROUP LLC (CHRYSLER), NOTIFIED NHTSA THAT IT WILL CONDUCT A SAFETY RECALL OF APPROXIMATELY 161,000 MODEL YEAR (MY) 2007 AND 2008 JEEP WRANGLER VEHICLES BUILT WITH AUTOMATIC TRANSMISSIONS.CHRYSLER STATED THAT THESE VEHICLES WERE NOT EQUIPPED WITH A TRANSMISSION FLUID TEMPERATURE WARNING SYSTEM AND THE OPERATION OF THESE VEHICLES BEYOND THE LIMITS OF REASONABLE USAGE OVER A PERIOD OF TIME COULD RESULT IN TRANSMISSION FAILURE AND IN SOME CASES TRANSMISSION FLUID EXPULSION.THE EXPELLED FLUID COULD COME IN CONTACT WITH A HOT ENGINE OR EXHAUST COMPONENT AND CAUSE A FIRE.CHRYSLER WILL CONDUCT A SAFETY RECALL TO INSTALL A HOT OIL WARNING MESSAGE IN THE INSTRUMENT CLUSTER AND A CHIME INDICATING AN ELEVATED TRANSMISSION FLUID TEMPERATURE CONDITION.AN OWNER'S MANUAL ADDENDUM STATING THE PURPOSE OF THE HOT OIL MESSAGE AND CHIME TO INCLUDE CAUTION AND WARNING STATEMENTS REGARDING ELEVATED TRANSMISSION FLUID TEMPERATURE CONDITIONS WILL BE PROVIDED TO OWNERS.BASED ON CHRYSLER'S DECISION TO CONDUCT A SAFETY RECALL THIS ENGINEERING ANALYSIS IS CLOSED.

Recorded closure: Nov 17, 2009

Campaign reference in the source: 09V436000

Find investigation PE09037
Opened Jul 22, 2009 ClosedTOW BAR ASSEMBLY FAILUREEQ09006

THE DEFECTIVE TOW BAR ASSEMBLIES INVOLVED IN THIS RECALL WERE SUPPLIED TO CHRYSLER FOR USE ON SOME OF ITS JEEP WRANGLER VEHICLES.THE PURPOSE OF THIS INVESTIGATION WAS TO IDENTIFY ANY ADDITIONAL PURCHASERS OF IDENTICAL OR SUBSTANTIALLY SIMILAR DEFECTIVE ASSEMBLIES AND TO INITIATE ADDITIONAL DEFECT REPORTING AND SAFETY RECALLS AS NECESSARY.TO ACCOMPLISH THIS RMD CONTACTED THE SUPPLIER OF THE ASSEMBLIES, VALLEY TOWING PRODUCTS, AND CONFIRMED NO OTHER SUCH ASSEMBLIES WERE DISTRIBUTED.THIS EQ IS THEREFORE CLOSED.

Recorded closure: Aug 19, 2009

Find investigation EQ09006

Your next step

Take good questions
to the inspection.

Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.