The vehicle dossier US · 2008
2008 Jeep
LIBERTYProblems & recalls
541 distinct owner reports in the NHTSA snapshot. Fuel system appears in 156 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 541 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
60,000 miles is the median among 444 reports with usable mileage. The middle half spans 37,000–98,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
5 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
STRUCTURECampaign 13V121000
Reported concern
Chrysler Group LLC (Chrysler) is recalling certain model year 2007-2008 Dodge Nitro 4X2 vehicles manufactured March 21, 2006, through March 1, 2008; and 2008 Jeep Liberty 4X2 vehicles manufactured February 15, 2007, through March 1, 2008. The transfer case heat shield may drop down and rub on the drive shaft, weakening it and potentially causing the drive shaft to break.
Manufacturer’s stated response
Chrysler will notify owners, and dealers will add a bracket to support the rear of the heat shield, free of charge. An interim letter was mailed to owners on May 29, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N10.
Manufacturer campaign: N10
Read campaign 13V121000 at NHTSAVISIBILITY:WINDSHIELD WIPER/WASHER:MOTORCampaign 10V550000
Reported concern
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008 JEEP LIBERTY VEHICLES. THE VEHICLES ARE EQUIPPED WITH WINDSHIELD WIPER MOTORS THAT CONTAIN EXCESS ADHESIVE THAT MAY ALLOW FOR WATER INTRUSION, WHICH COULD RESULT IN INTERMITTENT AND EVENTUALLY INOPERATIVE WINDSHIELD WIPER OPERATION.
Manufacturer’s stated response
DEALERS WILL REPLACE THE WINDSHIELD WIPER MOTOR FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 1, 2010. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Manufacturer campaign: K24
Read campaign 10V550000 at NHTSASUSPENSIONCampaign 09E039000
Reported concern
ROCK KRAWLER IS RECALLING 44 PERFORMANCE SUSPENSION SYSTEMS SOLD AS AFTERMARKET EQUIPMENT FOR USE ON THE VEHICLE LISTED ABOVE. THESE SUSPENSION SYSTEMS WERE PRODUCED WITH GRADE 2 CARRIAGE BOLTS INSTEAD OF THE PROPER GRADE 5 CARRIAGE BOLTS. THE IMPROPER GRADE 2 CARRIAGE BOLTS COULD EXPERIENCE A LOSS OF CLAMPING FORCE FOR THE BOTTOM STRUT FORK.
Manufacturer’s stated response
ROCK KRAWLER WILL NOTIFY OWNERS AND PROVIDE A FREE REMEDY. THE SAFETY RECALL BEGAN ON OCTOBER 15. 2008. ALL THE AFFECTED UNTITS HAVE BEEN REMEDIED. OWNERS MAY CONTACT ROCK KRAWLER AT 1-518-270-9822.
Read campaign 09E039000 at NHTSAPARKING BRAKECampaign 08V525000
Reported concern
CHRYSLER IS RECALLING 3,663 MY 2007-2008 DODGE NITRO AND MY 2008 JEEP LIBERTY VEHICLES EQUIPPED WITH MANUAL TRANSMISSIONS. THE PARK BRAKE LEVER CLUTCH DRUM MAY DISTORT AND REDUCE THE EFFECTIVENESS OF THE PARK BRAKE SYSTEM.
Manufacturer’s stated response
DEALERS WILL REPLACE THE PARK BRAKE LEVER ASSEMBLY FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 27, 2008. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Manufacturer campaign: H28
Read campaign 08V525000 at NHTSAVISIBILITY:WINDSHIELDCampaign 08V455000
Reported concern
CHRYSLER IS RECALLING 494 MY 2008 JEEP LIBERTY VEHICLES. THE WINDSHIELD AND/OR FIXED REAR QUARTER GLASS MAY HAVE BEEN ASSEMBLED USING INCORRECT URETHANE ADHESIVE. THIS COULD AFFECT GLASS RETENTION.
Manufacturer’s stated response
DEALERS WILL REPLACE THE WINDSHIELD AND/OR FIXED REAR QUARTER GLASS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 13, 2008. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Manufacturer campaign: H24
Read campaign 08V455000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
49 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
107418SWITCH - CLUTCH STARTER INTERLOCK & MASTER CYLINDER ASSEMBLY - CLUTCHNHTSA ID 11023612
SWITCH - CLUTCH STARTER INTERLOCK & MASTER CYLINDER ASSEMBLY - CLUTCH
Components: SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 11023612 at NHTSA9100226Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that…NHTSA ID 10248509
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10248509 at NHTSA9100226Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that…NHTSA ID 10244348
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Components: ELECTRICAL SYSTEM:WIRING. Confirm detailed applicability in the original document.
Source record 10244348 at NHTSA9004009Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are o…NHTSA ID 10221097
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10221097 at NHTSA9001784Mechanical rocker arm, intake, 1.7 ratio.NHTSA ID 10220471
Mechanical rocker arm, intake, 1.7 ratio.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10220471 at NHTSA9001784Mechanical rocker arm, intake, 1.7 ratio.NHTSA ID 10191442
Mechanical rocker arm, intake, 1.7 ratio.
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10191442 at NHTSAS1121000006RevA(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or ConcernsNHTSA ID 10221831
(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
Components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:TRANSMISSION CASE/HOUSING. Confirm detailed applicability in the original document.
Source record 10221831 at NHTSAS1121000006 Rev.(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or ConcernsNHTSA ID 10180221
(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
Components: ELECTRICAL SYSTEM · ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION. Confirm detailed applicability in the original document.
Source record 10180221 at NHTSA23-015-20Disinfectant Solution Recommended for COVID-19NHTSA ID 10175743
Disinfectant Solution Recommended for COVID-19
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10175743 at NHTSA08-049-20Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replaceme…NHTSA ID 10175735
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Components: ELECTRICAL SYSTEM · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10175735 at NHTSA3100519Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.NHTSA ID 10220101
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220101 at NHTSA3100319Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.NHTSA ID 10220099
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220099 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Totally Integrated Power Module FailureDP14004
In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007 model year. The petitioner alleges that TIPM defects may result in engine stall, airbag non-deployment, failure of fuel pump shutoff resulting in unintended acceleration, fire, and other symptoms. On September 25, 2014, the Office of Defects Investigation (ODI) opened DP14-004 to evaluate the petition for a grant or deny decision. ODI analyzed complaint data provided by CAS as well as complaints submitted to ODI from consumers. In total, there were 296 complaints submitted by the petitioner in the original petition and five supplements, including 271 complaints related to the subject vehicles equipped with TIPM-7. Approximately 3 percent of CAS complaints are related to vehicles equipped with TIPM-6 and ODI?s review of these complaints did not identify any safety defect trends. ODI conducted a detailed review of complaints narratives submitted by CAS and consumers including careful analysis of vehicle repair histories, warranty claims obtained from the manufacturer and any available Customer Assistance Inquiry reports (CAIR). Analysis of the field data indicated that MY2011-2013 Jeep Grand Cherokee and Dodge Durango vehicles exhibited significantly higher complaint rates related to fuel pump relay (FPR) failures than other subject vehicles. In a September 3, 2014 letter to NHTSA, Chrysler submitted a Defect Information Report (DIR) identifying a defect in the FPR within the TIPM-7 which can result in a no start or stall condition in approximately 188,723 model year (MY) 2011 Jeep Grand Cherokee (WK) and Dodge Durango (WD) vehicles manufactured from January 5, 2010 through July 20, 2011 (14V-530).In a February 24, 2015 letter, Chrysler submitted a second DIR expanding the scope of the FPR defect condition to include an additional 338,216 MY 2012 through 2013 Jeep Grand Cherokee vehicles manufactured from September 17, 2010 through August 19, 2013 and MY 2012 through 2013 Dodge Durango vehicles manufactured from January 18, 2011 through August 19, 2013 (15V-115).ODI analysis of the CAS allegations of TIPM defects resulting in stall while driving, airbag non-deployment, unintended acceleration, fire and other faults identified a single defect condition related to 1 of over 60 different circuits in the TIPM assembly. The most common effect of this defect condition, related to the fuel pump relay, was a no-start concern, but it could also result in stall while driving (76 complaints). No valid evidence was presented in support of claims related to airbag non-deployment, unintended acceleration or fire resulting from TIPM faults and these claims were found to be wholly without merit based on review of the field data and design of the relevant systems and components.Except insofar as the petitioner's contentions relate to the defect condition addressed by the Chrysler recalls, the factual bases of the petitioner's contentions that any further investigation is necessary are unsupported. In our view, additional investigation is unlikely to result in a finding that a defect related to motor vehicle safety exists or a NHTSA order for the notification and remedy of a safety-related defect as alleged by the petitioner at the conclusion of the requested investigation. Therefore, in view of the need to allocate and prioritize NHTSA's limited resources to best accomplish the agency's safety mission, the petition is den
Recorded closure: Jul 24, 2015
Find investigation DP14004Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.