The vehicle dossier US · 2007
2007 Jeep
COMMANDERProblems & recalls
696 distinct owner reports in the NHTSA snapshot. Electrical system appears in 371 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 696 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
73,900 miles is the median among 512 reports with usable mileage. The middle half spans 46,000–111,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
6 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
ELECTRICAL SYSTEM:IGNITION:SWITCHCampaign 14V438000
Reported concern
This defect can affect the safe operation of the airbag system. Until this recall is performed, drivers should adjust their seat to allow clearance between the driver's knee and the ignition key, and remove all items from their key ring, leaving only the vehicle key. Chrysler Group LLC (Chrysler) is recalling certain model year 2005-2007 Jeep Grand Cherokee vehicles manufactured February 11, 2004, to July 5, 2007, and 2006-2007 Jeep Commander vehicles manufactured January 31, 2005, to July 5, 2007. In the affected vehicles, the driver may accidentally hit the ignition key with their knee, unintentionally knocking the key out of the run position, turning off the engine.
Manufacturer’s stated response
Chrysler will notify owners, and dealers will replace the ignition switch, free of charge. Chrysler sent interim notifications to owners in September 2014. The recall began on October 9, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P41.
Manufacturer campaign: P41
Read campaign 14V438000 at NHTSAELECTRICAL SYSTEMCampaign 13V175000
Reported concern
Chrysler Group LLC (Chrysler) is recalling certain model year 2005-2010 Jeep Grand Cherokee vehicles manufactured February 11, 2004, through March 9, 2010; and 2006-2010 Jeep Commander vehicles manufactured January 31, 2005, through March 10, 2010. A transfer case electrical failure may result in an unintentional shifting of the transfer case into the neutral position.
Manufacturer’s stated response
Chrysler will notify owners, and dealers will reflash the final drive controller which governs the transfer case, with new software, free of charge. The recall began on August 15, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N23.
Manufacturer campaign: N23
Read campaign 13V175000 at NHTSASUSPENSIONCampaign 09E039000
Reported concern
ROCK KRAWLER IS RECALLING 44 PERFORMANCE SUSPENSION SYSTEMS SOLD AS AFTERMARKET EQUIPMENT FOR USE ON THE VEHICLE LISTED ABOVE. THESE SUSPENSION SYSTEMS WERE PRODUCED WITH GRADE 2 CARRIAGE BOLTS INSTEAD OF THE PROPER GRADE 5 CARRIAGE BOLTS. THE IMPROPER GRADE 2 CARRIAGE BOLTS COULD EXPERIENCE A LOSS OF CLAMPING FORCE FOR THE BOTTOM STRUT FORK.
Manufacturer’s stated response
ROCK KRAWLER WILL NOTIFY OWNERS AND PROVIDE A FREE REMEDY. THE SAFETY RECALL BEGAN ON OCTOBER 15. 2008. ALL THE AFFECTED UNTITS HAVE BEEN REMEDIED. OWNERS MAY CONTACT ROCK KRAWLER AT 1-518-270-9822.
Read campaign 09E039000 at NHTSASERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULECampaign 07V434000
Reported concern
ON CERTAIN SPORT UTILITY VEHICLES, THE SOFTWARE PROGRAMMED INTO THE ABS ELECTRONIC CONTROL MODULE MAY ALLOW A MOMENTARY DELAY IN BRAKING WHEN COASTING UP A HILL DURING CERTAIN CONDITIONS.
Manufacturer’s stated response
DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL MODULE WITH NEW SOFTWARE THAT PREVENTS THIS CONDITION FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 22, 2007. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Manufacturer campaign: G40
Read campaign 07V434000 at NHTSASERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPERCampaign 07V415000
Reported concern
ON CERTAIN SPORT UTILITY VEHICLES, FRONT BRAKE CALIPERS IN A CERTAIN LOT MAY HAVE BEEN MANUFACTURED FROM GRAY IRON INSTEAD OF DUCTILE IRON AS DESIGNED AND COULD FRACTURE WITHOUT WARNING.
Manufacturer’s stated response
DEALERS WILL INSPECT THE FRONT BRAKE CALIPERS TO SEE IF THEY FALL INTO THIS LOT AND, IF SO, WILL REPLACE THEM FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 22, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Manufacturer campaign: G35
Read campaign 07V415000 at NHTSASERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULECampaign 06V493000
Reported concern
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Manufacturer’s stated response
DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Manufacturer campaign: F50
Read campaign 06V493000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
64 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
101232Plate - PlanetaryNHTSA ID 11010205
Plate - Planetary
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 11010205 at NHTSA9100226Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that…NHTSA ID 10248509
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10248509 at NHTSA9100226Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that…NHTSA ID 10244348
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Components: ELECTRICAL SYSTEM:WIRING. Confirm detailed applicability in the original document.
Source record 10244348 at NHTSA9004009Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are o…NHTSA ID 10221097
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10221097 at NHTSA9004361NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmissionNHTSA ID 10220843
NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10220843 at NHTSA9004361NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmissionNHTSA ID 10190590
NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10190590 at NHTSA9001784Mechanical rocker arm, intake, 1.7 ratio.NHTSA ID 10220471
Mechanical rocker arm, intake, 1.7 ratio.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10220471 at NHTSA9001784Mechanical rocker arm, intake, 1.7 ratio.NHTSA ID 10191442
Mechanical rocker arm, intake, 1.7 ratio.
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10191442 at NHTSA23-015-20Disinfectant Solution Recommended for COVID-19NHTSA ID 10175743
Disinfectant Solution Recommended for COVID-19
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10175743 at NHTSA08-049-20Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replaceme…NHTSA ID 10175735
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Components: ELECTRICAL SYSTEM · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10175735 at NHTSA9004178DAMPER, Transfer Case Reman Transfer Case will arrive equipped with the Transfer Case Damper. Please return core with original damper intact.NHTSA ID 10220015
DAMPER, Transfer Case Reman Transfer Case will arrive equipped with the Transfer Case Damper. Please return core with original damper intact.
Components: POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE). Confirm detailed applicability in the original document.
Source record 10220015 at NHTSA9004178DAMPER, Transfer Case Reman Transfer Case will arrive equipped with the Transfer Case Damper. Please return core with original damper intact.NHTSA ID 10169163
DAMPER, Transfer Case Reman Transfer Case will arrive equipped with the Transfer Case Damper. Please return core with original damper intact.
Components: POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE). Confirm detailed applicability in the original document.
Source record 10169163 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Air Bag Non-deploymentPE14017
Chrysler is conducting a safety recall of approximately 643,618 model year 2006-2007 Jeep Commander and model year 2005-2007 Jeep Grand Cherokee vehicles to address the problem of ignition turning off while driving (see NHTSA recall 14V-438 for more information).According to Chrysler, these vehicles may experience an unintended change in ignition switch position while driving, which may result in loss of engine power, power steering, and braking assist, increasing the risk of a crash and disabling one or more of the vehicle's safety features including the frontal air bags.Most of the reported incidents occurred as a result of driver interaction with the ignition key.Based on the recall action taken by Chrysler, this Preliminary Evaluation is closed.Additionalinformation on this closing resume, and the investigation are in the PE14-017 public file available online at SaferCar.gov.The ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10101116 10103300 10106060 10112589 10116788 10126986 10128093 10130780 10145501 10146213 10153018 10155291 10156396 10158165 10162933 10166746 10178559 10183305 10186545 10189530 10192237 10193106 10194092 10199552 10199986 10221500 10222283 10227253 10231011 10328609 10358324 10392364 10577532 10585326 10585976 10599142 10604990 10605091 10605209 10606494 10606610 10607043 10607614 10607785 10608196 10615565 10615671 10615761 10616124 10633266 10633313 10633724 10639371 10640010 10644827 10652526 10653000 10653382 10654009 10654139 10654809 10655095 10659448 10662220 10662703
Recorded closure: Dec 23, 2014
Campaign reference in the source: 14V438000
Find investigation PE14017Fleet Vehicle Recall Completion AuditAQ10001
On November 18, 2010, NHTSA's Recall Management Division (RMD) opened an audit query (AQ10-001) to investigate recall remedy completion by rental car companies on safety recall campaigns.It was expected to provide the agency an indication of how completely and how quickly rental car fleets perform necessary recall-related remedies on the vehicles owned and then rented/leased for use on the roadways.RMD queried three (3) major motor vehicle manufacturers (Ford, Chrysler, and General Motors) and requested data regarding completion figures for fifteen (15) discreet safety recalls.Analysis of this data demonstrated that rental car recalls completion was neither complete nor consistent.The rental car companies representing the largest market share in the industry were then queried as to their respective policies for the rental, lease, and sale of vehicles with open recalls.The data and responses from the manufacturers and the rental car companies can be found in the document repository by accessing the ?Associated Documents link above.In December 2015, Congress enacted the Fixing America's Surface Transportation (FAST) Act.One section of the Act prohibits rental car companies from renting, leasing, or selling motor vehicles subject to open safety recalls.With the passage of the FAST Act and its prohibition, there is no continuing need for the agency to investigate rental car recall completions.Accordingly, this investigation is closed.The agency reserves the right to open any future investigations, including audits of individual recalls, or groups of recalls, or rental car companies, to examine more closely safety recalls performance and completion issues in this area.
Recorded closure: Dec 28, 2015
Find investigation AQ10001ENGINE STALLINGEA07007
ON MAY 5, 2008, CHRYSLER LLC (CHRYSLER) SUBMITTED A DEFECT INFORMATION REPORT TO NHTSA CONCERNING AN ENGINE CALIBRATION ISSUE THAT COULD RESULT IN ENGINE STALL IN APPROXIMATELY 24,461 MODEL YEAR (MY) 2006 JEEP COMMANDER VEHICLES EQUIPPED WITH THE 4.7L V-8 ENGINE AND BUILT FROM FEBRUARY 25, 2005 THROUGH JANUARY 11, 2006.ACCORDING TO CHRYSLER, THE POWERTRAIN CONTROL MODULE (PCM) WAS PROGRAMMED WITH SOFTWARE THAT MAY ALLOW THE ENGINE TO STALL DURING CERTAIN OPERATING CONDITIONS.CHRYSLER DEALERS WILL REPROGRAM THE PCM SOFTWARE IN THE RECALLED VEHICLES. INFORMATION PROVIDED BY CHRYSLER DURING PE07-009 AND EA07-007 INDICATED THAT A REVISED ENGINE CALIBRATION WAS IMPLEMENTED IN PRODUCTION EFFECTIVE JANUARY 12, 2006 FOR THE MY 2006 JEEP COMMANDER VEHICLES EQUIPPED WITH 4.7L V-8 ENGINES.ODI'S ANALYSIS OFCONSUMER COMPLAINTS, FIELD REPORTS AND OTHER DATA RELATED TO FIELD EXPERIENCE WITH ENGINE STALLING IN MY 2006 THROUGH 2007 JEEP COMMANDER VEHICLES EQUIPPED WITH 3.7L, 4.7L AND 5.7L ENGINES IDENTIFIED AN ELEVATED RATE OF STALLING INCIDENTS IN THE MY 2006 VEHICLES EQUIPPED WITH 4.7L ENGINES THAT WERE MANUFACTURED BEFORE THE CALIBRATION CHANGE.ODI INTERVIEWED OVER 70 CONSUMERS WHO REPORTED STALLING INCIDENTS IN EARLY PRODUCTION MY 2006 4.7L VEHICLES.INFORMATION GATHERED FROM THOSE INTERVIEWS INDICATED THAT THE STALLING INCIDENTS WERE OCCURRING AT VARIOUS SPEEDS, OFTEN OCCURRED DURING TURNS AND TYPICALLY OCCURRED MORE THAN ONCE.THE INTERVIEWS DID NOT IDENTIFY ANY CONCERNS WITH RESTARTABILITY. ALTHOUGH THE EARLY MY 2006 PRODUCTION VEHICLES WITH 4.7L ENGINES MAKE UP ONLY ABOUT 15 PERCENT OF ALL MY 2006 THROUGH 2007 JEEP COMMANDERS BUILT BY CHRYSLER, THEY WERE RESPONSIBLE FOR 465 OF THE 854 REPORTED STALLING INCIDENTS (54%), 6 OF THE 12 CRASH INCIDENTS (50%) AND THE ONLY INJURY CLAIM.THE STALLING RATE FOR THE RECALLED VEHICLES IS 1.90 PERCENT, ALMOST 7 TIMES GREATER THAN THE RATE IN THE REMAINING POPULATION (0.28 PERCENT).CHRYSLER'S RECALL COVERS THE VEHICLES WITH THE ELEVATED STALLING RATE.THE REMAINING VEHICLES HAVE RELATIVELY LOW RATES OF STALLING AND DO NOT EXHIBIT ANY SIGNS OF AGGRAVATING FACTORS SUCH AS PROBLEMS WITH RESTART. ODI ALSO ANALYZED COMPLAINTS ALLEGING CONCERNS WITH LOSS OF LIGHTING COINCIDENT TO STALLING INCIDENTS.THIS ANALYSIS IDENTIFIED SEVEN STALLING INCIDENTS WHERE LOSS OF EXTERIOR LIGHTING WAS ALLEGED.NO SPECIFIC CAUSE WAS IDENTIFIED IN THESE INCIDENTS AND THERE WAS NO DISCERNIBLE PATTERN REGARDING ENGINE, VEHICLE PRODUCTION OPTIONS, BUILD RANGE OR FAILURE TREND. THIS INVESTIGATION IS CLOSED WITH CHRYSLER'S RECALL.
Recorded closure: May 7, 2008
Campaign reference in the source: 08V203000
Find investigation EA07007ENGINE STALLPE07009
ODI HAS RECEIVED 76 VEHICLE OWNER COMPLAINTS ALLEGING INCIDENTS OF ENGINE STALL WHILE DRIVING IN MODEL YEAR (MY) 2006 THROUGH 2007 JEEP COMMANDER VEHICLES (SUBJECT VEHICLES).SOME OF THE COMPLAINTS REPORTED ONE OR MORE INCIDENTS OF ENGINE STALL WITH A SIMULTANEOUS LOSS OF SOME OR ALL LIGHTING SYSTEMS, INCLUDING HEADLAMPS.TWO ENGINE STALLS RESULTED IN A VEHICLE CRASH.IN ITS RESPONSE TO A REQUEST FOR INFORMATION, DAIMLERCHRYSLER CORPORATION (DCC) INDICATED THAT IT HAS NOT DETERMINED THE CAUSE OF ENGINE STALLING IN THE SUBJECT VEHICLES AND THAT IT HASFORMED A MULTI-DISCIPLINARY TASK FORCE TO INVESTIGATE THE ISSUE. THIS INVESTIGATION HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS (EA07-007) TO FURTHER ASSESS THE FREQUENCY, SCOPE AND POTENTIAL SAFETY CONSEQUENCES OF THE ALLEGED DEFECT.
Recorded closure: Apr 27, 2007
Find investigation PE07009Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.