The vehicle dossier US · 2008
2008 Hyundai
VERACRUZProblems & recalls
230 distinct owner reports in the NHTSA snapshot. Engine appears in 94 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 230 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
86,379 miles is the median among 172 reports with usable mileage. The middle half spans 50,100–129,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
7 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:SEALS/GASKETSCampaign 20V705000
Reported concern
Hyundai Motor America (Hyundai) is recalling certain 2007-2012 Veracruz vehicles that were previously recalled under recall number 14V-415. Oil may leak from the front cylinder bank cover gasket, potentially dripping onto the alternator and causing the charging system to become inoperative.
Manufacturer’s stated response
Hyundai will notify owners, and dealers will inspect the valve cover gasket and repair it as necessary, free of charge. Owner letters were mailed September 7, 2021. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 197.
Manufacturer campaign: 197
Read campaign 20V705000 at NHTSAENGINE AND ENGINE COOLING:ENGINECampaign 14V415000
Reported concern
Hyundai Motor Company (Hyundai) is recalling certain model year 2007-2012 Veracruz vehicles manufactured from December 26, 2006, through July 24, 2012. The affected vehicles may experience an oil leak from the front cylinder bank valve cover gasket. If there is a sufficient amount of oil dropped onto the alternator, the alternator will be damaged causing the charging system to become inoperative.
Manufacturer’s stated response
Hyundai will notify owners, and dealers will inspect/repair or replace the alternator and the front valve cover gasket, free of charge. Hyundai sent out an interim letter to owners on September 3, 2014. Owners may contact Hyundai customer service at 1-800-633-5151. Hyundai's number for this recall is 121.
Manufacturer campaign: 121
Read campaign 14V415000 at NHTSAEXTERIOR LIGHTING:BRAKE LIGHTS:SWITCHCampaign 13V113000
Reported concern
Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate.
Manufacturer’s stated response
Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.
Manufacturer campaign: 110
Read campaign 13V113000 at NHTSAAIR BAGS:FRONTALCampaign 11V472000
Reported concern
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2007-2008 HYUNDAI VERACRUZ VEHICLES MANUFACTURED FROM DECEMBER 26, 2006, THROUGH MARCH 21, 2008, AND MODEL YEAR 2007-2008 HYUNDAI SANTA FE VEHICLES MANUFACTURED FROM APRIL 19, 2006 THROUGH MARCH 20, 2008. THE CLOCK SPRING CONTACT ASSEMBLY FOR THE DRIVER'S AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) MAY BECOME DAMAGED THROUGH USAGE OVER TIME. THE DRIVER'S AIR BAG ELECTRICAL CIRCUIT WILL EXPERIENCE A HIGH RESISTANCE CONDITION, POTENTIALLY CAUSING THE DRIVER'S AIR BAG TO NOT DEPLOY.
Manufacturer’s stated response
HYUNDAI DEALERS WILL REPLACE THE VEHICLE'S DRIVER'S AIR BAG CLOCK SPRING CONTACT ASSEMBLY FREE OF CHARGE. THE SAFETY RECALL BEGAN IN NOVEMBER 2011. OWNERS MAY CONTACT HYUNDAI CUSTOMER CONNECT CENTER AT 1-800-633-5151.
Manufacturer campaign: 103
Read campaign 11V472000 at NHTSAEXTERIOR LIGHTING:BRAKE LIGHTS:SWITCHCampaign 09V122000
Reported concern
HYUNDAI IS RECALLING 532,633 MY 2006-2007 ACCENT, ENTOURAGE, SONATA, MY 2007 AZERA, ELANTRA AND SANTA FE, MY 2005-2007 TUCSON AND MY 2007-2008 VERACRUZ VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A STOP LAMP SWITCH MALFUNCTION MAY ALSO AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION SHIFTER WOULD NOT BE ABLE TO BE SHIFTED OUT OF THE PARK POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED.
Manufacturer’s stated response
DEALERS WILL REPLACE THE STOP LAMP SWITCH FREE OF CHARGE. THE RECALL BEGAN ON JUNE 29, 2009. OWNERS MAY CONTACT THE HYUNDAI CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.
Manufacturer campaign: 092
Read campaign 09V122000 at NHTSATRAILER HITCHESCampaign 08E055000
Reported concern
HYUNDAI IS RECALLING 3,387 TRAILER HITCH WIRING HARNESSES EITHER INCLUDED WITH A TRAILER HITCH OR SOLD AS A SERVICE PART MANUFACTURED BY THULE TOWING SYSTEMS AND DISTRIBUTED BY HYUNDAI FOR INSTALLATION ON MY 2007-2008 SANTA FE AND VERACRUZ VEHICLES. THE ACCESSORY TRAILER HITCH WIRING HARNESS CONVERTER MODULE IS MOUNTED TO THE TOP SURFACE OF THE REAR BUMPER REINFORCEMENT. SOME CIRCUIT BOARD COMPONENTS MAY NOT HAVE BEEN THOROUGHLY SEALED TO PREVENT MOISTURE CONTACT. THE MOISTURE MAY RESULT IN CIRCUIT BOARD CORROSION POSSIBLY CAUSING A SHORT CIRCUIT.
Manufacturer’s stated response
THIS RECALL SUPERSEDES A PREVIOUS RECALL CONDUCTED BY HYUNDAI AFFECTING THE SAME TRAILER HITCH WIRING COMPONENTS CONCERNING HIGH CURRENT LEAKAGE OR A SHORT CIRCUIT OF CAPACITOR C1. (PLEASE SEE 08E016). OWNERS WHO HAVE ALREADY HAD THEIR TRAILER HITCH REPAIRED UNDER THE INITIAL CAMPAIGN WILL RECEIVE A SECOND NOTICE FROM HYUNDAI TO HAVE THE NEWLY DESIGNED HARNESS INSTALLED. HYUNDAI WILL NOTIFY ALL OWNERS AND WILL REPAIR THE AFFECTED HARNESSES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 13, 2008. OWNERS MAY CONTACT HYUNDAI CUSTOMER ASSISTANT CENTER AT 1-800-633-5151.
Manufacturer campaign: 085
Read campaign 08E055000 at NHTSATRAILER HITCHESCampaign 08E016000
Reported concern
THIS RECALL HAS BEEN SUPERCEDED BY RECALL 08E-055. HYUNDAI IS RECALLING 3,387 TRAILER HITCH WIRING HARNESSES EITHER INCLUDED WITH A TRAILER HITCH OR SOLD AS A SERVICE PART MANUFACTURED BY THULE TOWING SYSTEMS AND DISTRIBUTED BY HYUNDAI FOR INSTALLATION ON MY 2007-2008 SANTA FE AND VERACRUZ VEHICLES. THE ACCESSORY TRAILER HITCH WIRING HARNESS CONVERTER MODULE IS MOUNTED TO THE TOP SURFACE OF THE REAR BUMPER REINFORCEMENT. HIGH CURRENT LEAKAGE OR A SHORT CIRCUIT OF CAPACITOR C1 COULD CAUSE HEAT RELATED DAMAGE TO THE WIRING HARNESS CONVERTER MODULE.
Manufacturer’s stated response
HYUNDAI WILL NOTIFY OWNERS AND WILL REPLACE THE TRAILER HITCH WIRING HARNESS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 31, 2008. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.
Manufacturer campaign: 082
Read campaign 08E016000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
51 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
DTN DLThe National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN…NHTSA ID 11032523
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 11032523 at NHTSADTN DCSThe National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co.…NHTSA ID 11032522
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 11032522 at NHTSA25-BD-012H TSBThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensat…NHTSA ID 11025476
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Components: EXTERIOR LIGHTING. Confirm detailed applicability in the original document.
Source record 11025476 at NHTSA24-BD-001HThis bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail sp…NHTSA ID 10251285
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
Components: VISIBILITY · VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 10251285 at NHTSA23-EM-005HThis bulletin provides important checkpoint guidelines when performing engine oil and filter change services.NHTSA ID 10247189
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10247189 at NHTSA23-BD-007HHyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the pa…NHTSA ID 10235566
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 10235566 at NHTSA23-BD-002HThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensat…NHTSA ID 10230904
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Components: VISIBILITY. Confirm detailed applicability in the original document.
Source record 10230904 at NHTSA22-EM-010HFollow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.NHTSA ID 10217251
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10217251 at NHTSA22-GI-006HEffective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before re…NHTSA ID 10217258
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
Components: TIRES. Confirm detailed applicability in the original document.
Source record 10217258 at NHTSA21-BE-003H-1The warranty coverage for the clock spring has been extended to 15 years with unlimited mileage from the date of original retail delivery or date of first use, whichever occurs first. This warranty coverage applies to both the …NHTSA ID 10196577
The warranty coverage for the clock spring has been extended to 15 years with unlimited mileage from the date of original retail delivery or date of first use, whichever occurs first. This warranty coverage applies to both the original and subsequent owners. Refer to the warranty and service parts information outlined in this bulletin whenever clock spring replacement is required.
Components: AIR BAGS · STEERING. Confirm detailed applicability in the original document.
Source record 10196577 at NHTSA21-EM-004HThis bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next r…NHTSA ID 10190044
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Components: ENGINE AND ENGINE COOLING · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10190044 at NHTSA21-BR-002HThis bulletin provides best practice recommendations when performing brake service procedures.NHTSA ID 10190038
This bulletin provides best practice recommendations when performing brake service procedures.
Components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 10190038 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
STOP LAMP SWITCH FAILUREPE09003
BY LETTER DATED APRIL 15, 2009, HYUNDAI NOTIFIED THE AGENCY THAT IT WILL CONDUCT A SAFETY RECALL (NHTSA RECALL NUMBER 09V122) TO REPLACE THE STOP LAMP SWITCHES ON MANY OF ITS MODEL YEAR 2005-2008 VEHICLES.SEE RECALL 09V122 FOR A COMPLETE LIST. THE AGENCY OPENED ITS INVESTIGATION BASED ON FIVE COMPLAINTS OF STOP LAMP FAILURE ACROSS SEVERAL 2007 HYUNDAI MODELS. THE AGENCY ALSO RECEIVED EARLY WARNING (EWR) REPORTS ON THIS ISSUE.MOST OF THOSE FAILURES WERE TRACED TO THE IMPROPER OPERATION OF THE STOP LAMP SWITCH THAT CONTROLS STOP LAMP ILLUMINATION.A MALFUNCTIONING STOP LAMP SWITCH CAN CAUSE THE VEHICLE'S BRAKE LIGHTS NOT TO LIGHT DURING BRAKING, OR ALTERNATIVELY, IT CAN CAUSE THE BRAKE LIGHTS TO STAY LIT EVEN WHEN A DRIVER TAKES THE FOOT OFF THE BRAKE PEDAL. FAILURE OF THE STOP LAMPS TO ILLUMINATE PROPERLY CREATES THE HAZARD OF REAR END COLLISIONS WHEN DRIVERS FOLLOWING THE SUBJECT VEHICLE DO NOT RECOGNIZE THAT THE VEHICLE IS SLOWING OR STOPPING. HYUNDAI REPORTED ONE CRASH INCIDENT (A FRONTAL IMPACT), WITHOUT INJURY, THAT WAS ALLEGED TO HAVE BEEN CAUSED BY THIS DEFECT.THE AGENCY REVIEWED THE INCIDENT AND CANNOT CONCLUDE THAT IT IS RELATED TO THIS DEFECT. THERE ARE OTHER POTENTIAL PROBLEMS RELATED TO FAILURE OF THE STOP LAMP SWITCH: FAILURE OF THE CRUISE CONTROL TO DISENGAGE, INTERFERENCE WITH PROPER FUNCTIONING OF ANTILOCK BRAKES AND ELECTRONIC STABILITY CONTROL, AND INABILITY TO MOVE THE GEAR SHIFT LEVER OUT OF PARK POSITION.BASED ON THE ABOVE SAFETY RECALL, THIS INVESTIGATION IS CLOSED.
Recorded closure: Apr 24, 2009
Campaign reference in the source: 09V122000
Find investigation PE09003Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.