2023 Hyundai
TUCSONProblems & recalls

Certain 2022 – 2025 model year Santa Cruz and 2022 – 2025 model year Tucson vehicles may have front wipers that do not return to the designated park position due to a loose wiper motor crank arm nut. At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, the warranty coverage for the Wiper Motor Crank Arm Nut under these conditions has been extended to 10 years/100,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

Campaign / software reference: Z08

Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.

Some Tucson (NX4A and NX4M) and Santa Cruz (NXT) vehicles may have front wipers that do not return to the designated park position due to a loose wiper motor crank arm nut. Hyundai is extending the warranty coverage for the wiper motor crank arm nut under this condition to 10 years / 100,000 miles from the date of original retail delivery or date of first use (whichever comes first) and is valid for original and subsequent owners. Follow the procedure in Technical Service Bulletin (TSB) 26-BD-007H to replace the wiper motor crank arm nut to address this condition.

Campaign / software reference: Z08

Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.

Some Tucson (NX4A and NX4M) and Santa Cruz (NXT) vehicles may have front wipers that do not return to the designated park position due to a loose wiper motor crank arm nut. Hyundai is extending the warranty coverage for the wiper motor crank arm nut under this condition to 10 years / 100,000 miles from the date of original retail delivery or date of first use (whichever comes first) and is valid for original and subsequent owners.

Campaign / software reference: Z08

Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.

Some Tucson (NX4A and NX4M) and Santa Cruz (NXT) vehicles may have front wipers that do not return to the designated park position due to a loose wiper motor crank arm nut. Hyundai is extending the warranty coverage for the wiper motor crank arm nut under this condition to 10 years / 100,000 miles from the date of original retail delivery or date of first use (whichever comes first) and is valid for original and subsequent owners. Follow the procedure in this bulletin to replace the wiper motor crank arm nut to address this condition.

Campaign / software reference: Z08

Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.

Some Palisade (LX2), Tucson (NX4), and Tucson Hybrid (NX4 HEV) vehicles may experience battery drain due to continuous operation of the cooling fan after vehicle ignition has been turned off, potentially resulting in a no-start condition. The continuous cooling fan operation is caused by a stuck relay in the engine room PCB block. This bulletin provides instructions to replace the engine room PCB block to ensure the proper operation of the cooling fan.

Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.

This bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.

Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.

Some vehicles may exhibit difficulty starting in cold weather. This bulletin provides the procedure to perform an inspection on the starter magnetic switch for potential freezing and, if necessary, replace the starter magnetic switch (solenoid) assembly.

Components: ELECTRICAL SYSTEM · ENGINE. Confirm detailed applicability in the original document.

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

Components: AIR BAGS. Confirm detailed applicability in the original document.

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

Components: AIR BAGS. Confirm detailed applicability in the original document.

Some 2019MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).

Components: EXTERIOR LIGHTING · FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL · FORWARD COLLISION AVOIDANCE: WARNINGS · LANE DEPARTURE: ASSIST · LANE DEPARTURE: WARNING. Confirm detailed applicability in the original document.

Some Santa Fe (TMA) and Tucson (NX4A) vehicles equipped with a 2.5L GDI engine and 8 speed automatic transmission may have DTC U028700 (Lost Communication With Trans Fluid Pump Module) set by the transmission Electric Oil Pump (EOP). This DTC can cause the Idle Stop & Go (ISG) system to become inoperative. Follow the procedure in this bulletin to replace the Electric Oil Pump on affected vehicles.

Components: POWER TRAIN. Confirm detailed applicability in the original document.

Some Tucson (NX4A) vehicles may have an inoperable horn that may be caused by foreign substances causing internal parts to oxidize. This bulletin provides instructions on how to replace both inoperative horns.

Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.