The vehicle dossier US · 2016
2016 Hyundai
TUCSONProblems & recalls
1,619 distinct owner reports in the NHTSA snapshot. Other components appears in 556 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 1,619 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 12 years with reports.
29,363 miles is the median among 832 reports with usable mileage. The middle half spans 5,000–64,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
5 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULECampaign 20V543000
A park-outside advisory is recorded. Verify applicability immediately with NHTSA or the manufacturer.
Reported concern
Hyundai Motor America (Hyundai) recalled certain 2019-2021 Tucson vehicles on September 4, 2020. On December 30, 2020, Hyundai expanded the recall population, and added certain 2016-2018 Tucson vehicles. The Anti-lock Brake Hydraulic Electronic Control Unit (HECU) could corrode internally and cause an electrical short, possibly resulting in an engine compartment fire.
Manufacturer’s stated response
Hyundai will notify owners, and dealers will replace the HECU fuse. For 2019-2021 model years, the Electronic Stability Control (ESC) software will also be updated. Recall repairs will be performed free of charge. Owners are advised to park outside and away from structures as a precaution until the recall repair is complete. The recall began November 2, 2020. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 195.
Manufacturer campaign: 195
Read campaign 20V543000 at NHTSATRAILER HITCHESCampaign 16V842000
Reported concern
Hyundai Motor America (Hyundai) is recalling certain model year 2016-2017 Tucson vehicles manufactured May 19, 2015, to November 14, 2016, and 2017 Santa Fe vehicles manufactured November 28, 2015, to November 14, 2016. The affected vehicles may be equipped with an accessory trailer hitch wiring harness that, due to a malfunction of the tow hitch module, may result, in the trailer brake lights being constantly illuminated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, " Lamps, Reflective Devices, and Associated Equipment."
Manufacturer’s stated response
Hyundai will notify owners, and dealers will replace the affected accessory trailer hitch wiring harnesses, free of charge. The recall is expected to begin January 13, 2017. Owners may contact Hyundai customer service at 1-800-633-5151. Hyundai's number for this recall is 153.
Manufacturer campaign: 153
Read campaign 16V842000 at NHTSAELECTRICAL SYSTEM:SOFTWARECampaign 16V628000
Reported concern
Hyundai Motor Company (Hyundai) is recalling certain model year 2016 Tucson vehicles manufactured May 20, 2015 through May 31, 2016 and equipped with a 7-speed EcoShift Dual Clutch Transmission. Certain driving conditions and high temperatures may cause the vehicle to not move if the accelerator pedal is pressed and released repeatedly.
Manufacturer’s stated response
Hyundai will notify owners, and dealers will update the Transmission Control Module software, free of charge. The recall is expected to begin on October 28, 2016. Owners may contact Hyundai customer service at 1-855-671-3059. Hyundai's number for this recall is 149.
Manufacturer campaign: 149
Read campaign 16V628000 at NHTSALATCHES/LOCKS/LINKAGES:HOOD:LATCHCampaign 16V348000
Reported concern
Hyundai Motor Company (Hyundai) is recalling certain model year 2016 Tucson vehicles manufactured May 19, 2015 to March 14, 2016. In the affected vehicles, if the primary hood latch has been released, and the vehicle is driven, the secondary hood latch may not hold adequately secure the hood to prevent it from opening while the vehicle is in motion.
Manufacturer’s stated response
Hyundai will notify owners, and dealers will replace the secondary hood latch, free of charge. The recall began on June 30, 2016. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 145.
Manufacturer campaign: 145
Read campaign 16V348000 at NHTSAEXTERIOR LIGHTING:TAIL LIGHTSCampaign 16V147000
Reported concern
Hyundai Motor America (Hyundai) is recalling certain model year 2016 Hyundai Tucson vehicles manufactured May 26, 2015 to January 15, 2016 and equipped with an accessory trailer hitch harness either included with the accessory trailer hitch or sold as a service part. In the affected vehicles, when the vehicle's engine is running and the brake lights are illuminated, if the turn signal is activated, the trailer turn signal lights will either turn off or remain continuously illuminated (not flash). As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard Number 108, " Lamps, Reflective Devices, and Associated Equipment."
Manufacturer’s stated response
Hyundai will notify owners, and dealers will update the tow hitch harness, free of charge. The recall began on May 2, 2016. Owners may contact Hyundai customer service at 1-855-371-9640. Hyundai's number for this recall is 142.
Manufacturer campaign: 142
Read campaign 16V147000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
168 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
26-EM-014H TSBSome Tucson (TL) vehicles equipped with a 2.0L engine may exhibit a continued DTC P132600 after an ECM logic update has been performed per TSB 24-01-068H, Engine Monitoring Logic (Service Campaign 966). This bulletin provides i…NHTSA ID 11037434
Some Tucson (TL) vehicles equipped with a 2.0L engine may exhibit a continued DTC P132600 after an ECM logic update has been performed per TSB 24-01-068H, Engine Monitoring Logic (Service Campaign 966). This bulletin provides instructions to inspect and resolve other engine mechanical issues and if DTC P132600 remains, then a procedure and manual mode passwords are given to perform the update again in manual mode to resolve this condition.
Components: ELECTRICAL SYSTEM · ENGINE. Confirm detailed applicability in the original document.
Source record 11037434 at NHTSADTN DLThe National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN…NHTSA ID 11032523
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 11032523 at NHTSADTN DCSThe National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co.…NHTSA ID 11032522
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 11032522 at NHTSA26-01-033H TSBThis TSB references the Op codes to use for claim submission and the Parts required based on the vehicle’s inspection results from TSB 22-01-023H-2 (DTC P1326 – Engine Bearing Inspection/Engine Replacement) or the latest version.NHTSA ID 11030331
This TSB references the Op codes to use for claim submission and the Parts required based on the vehicle’s inspection results from TSB 22-01-023H-2 (DTC P1326 – Engine Bearing Inspection/Engine Replacement) or the latest version.
Campaign / software reference: T6G
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11030331 at NHTSA26-01-033H DNThis TSB references the Op codes to use for claim submission and the Parts required based on the vehicle’s inspection results from TSB 22-01-023H (DTC P1326 – Engine Bearing Inspection/Engine Replacement) or the latest version.NHTSA ID 11030330
This TSB references the Op codes to use for claim submission and the Parts required based on the vehicle’s inspection results from TSB 22-01-023H (DTC P1326 – Engine Bearing Inspection/Engine Replacement) or the latest version.
Campaign / software reference: T6G TXXM
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11030330 at NHTSAP33 OLIn response to this trend, we engineered a software upgrade that addresses the social media theft method and made it available to owners of eligible models free of charge at authorized Hyundai dealers since early 2023. In addit…NHTSA ID 11026704
In response to this trend, we engineered a software upgrade that addresses the social media theft method and made it available to owners of eligible models free of charge at authorized Hyundai dealers since early 2023. In addition to the anti-theft software, we’ve developed a new zinc-reinforced ignition cylinder protector hardware upgrade that can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because your Hyundai vehicle with the VIN listed above (“Subject Vehicle”) was not factory-equipped with an engine immobilizer and was previously eligible for the software upgrade, you are now eligible until March 31, 2027 to have the ignition cylinder protector installed — if you request it — at no cost to you through an authorized Hyundai dealership.
Campaign / software reference: P33
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11026704 at NHTSA25-01-089H DCSUpon customer's request ONLY, the Technical Service Bulletin (TSB) 25-01-089H provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows. Th…NHTSA ID 11027035
Upon customer's request ONLY, the Technical Service Bulletin (TSB) 25-01-089H provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows. This repair procedure is being provided in addition to the previous Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1).
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11027035 at NHTSA25-01-089H DNIn addition to the Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1), a zinc reinforced ignition cylinder protector hardware upgrade is being made available to customers upon request. This supplemental …NHTSA ID 11027034
In addition to the Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1), a zinc reinforced ignition cylinder protector hardware upgrade is being made available to customers upon request. This supplemental security measure is to be installed at the ignition switch location and provides additional protection against the social media theft method. Vehicles not equipped with an immobilizer during production at the factory are eligible. The repair procedure shall be performed and claimed upon customer request only. Any future repairs to these vehicles in which an installed ignition cylinder protector impacts required parts and/or labor, shall be covered by HMA. Please see TSB 25-01-089H for details.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11027034 at NHTSA25-01-089H TSBThis bulletin provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows.NHTSA ID 11027033
This bulletin provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11027033 at NHTSA25-BD-012H TSBThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensat…NHTSA ID 11025476
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Components: EXTERIOR LIGHTING. Confirm detailed applicability in the original document.
Source record 11025476 at NHTSA25-01-024H-1 TSBSome vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this…NHTSA ID 11018575
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.
Campaign / software reference: 9C1
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11018575 at NHTSA25-01-024H EMSome vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issu…NHTSA ID 11017111
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issues with remote commands, or other Bluelink services, please see the instructions below to reestablish the connection via the AVN pinhole reset method.
Campaign / software reference: 9C1
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11017111 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Loss of Motive PowerDP22003
The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles spanning Model Years (MY) 2005-2021. The Petitioners cited examples of complaints indicating that the subject vehicles were experiencing rapid loss of engine oil due to oil drain plug back outs, resulting in loss of motive power and/or catastrophic engine damage. Additional complaints were provided which alleged that the oil drain pans lack sufficient structural integrity and are susceptible to cracking. The petition itself can be reviewed at NHTSA.gov under ODI number 11481745. On September 12, 2022, the Office of Defects Investigation (ODI) opened Defect Petition (DP22-003) to evaluate the Petitioners’ request. The Petitioners have provided additional complaints within four supplemental letters dated January 31, 2023, March 21, 2023, May 23, 2023, and August 4, 2023. ODI’s evaluation included the review and analysis of the complaints and supporting information submitted by the Petitioners, as well as additional complaints submitted directly to NHTSA which referenced either the oil drain plug or a crack in the oil pan. After reviewing the available data, ODI has not identified evidence that would support opening a defect investigation into the oil drain pan assemblies of the subject vehicles. Based on a review of the available information, a loss of motive power resulting from an oil drain plug back out has not occurred between the initial sale of a vehicle and the completion of its first oil change. If during an oil change service, a technician fails to remove the existing drain plug gasket before installing a new gasket, it is likely that a proper seal between the drain plug and the oil pan will not be made. An improper seal between the drain plug and oil pan could lead to the backing out on the drain plug, resulting in the sudden loss of oil while driving. Additionally, the provided examples of oil pan cracks were localized to the immediate vicinity of the oil drain plug and/or appeared to be the result of direct-contact with a tool during servicing. There is no information to support that a vehicle-based defect exists relating to the oil pan assembly, and instead the documented incidents are related to the failure to follow the proper maintenance procedures during oil change service. In October 2023, Hyundai published a Technical Service Bulletin (TSB) that provided detailed instructions for oil change service on its gasoline powered vehicles, specifically highlighting the need to remove and replace the existing drain plug gasket prior to reinstalling the drain plug. After a thorough review of the material submitted by the petitioner, the information already in NHTSA's possession, and the potential risks to motor vehicle safety implicated by the petitioners' allegations, NHTSA does not believe that a formal investigation is warranted. Therefore, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA’s reasons for denial of the petition will be published. The reference numbers for the complaints to NHTSA cited by the petitioner can be found in the petition submission documents in the public file for DP22-003. To review those complaints and the additional complaints ODI added to its evaluation which are cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Recorded closure: Dec 12, 2023
Find investigation DP22003Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.