The vehicle dossier US · 2001
2001 Hyundai
ELANTRAProblems & recalls
315 distinct owner reports in the NHTSA snapshot. Air bags appears in 118 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 315 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
73,000 miles is the median among 197 reports with usable mileage. The middle half spans 40,000–105,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
6 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
SUSPENSION:FRONT:CONTROL ARMCampaign 09V125000
Reported concern
HYUNDAI IS RECALLING 160,904 MY 2001-2003 ELANTRA AND MY 2003 TIBURON VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA. ROAD SALT USED DURING THE WINTER MONTHS IN THESE JURISDICTIONS MAY RESULT IN INTERNAL CORROSION AND THINNING OF THE STEEL IN THE FRONT LOWER CONTROL ARMS. THE CORROSION MAY PROGRESS TO THE POINT WHERE THE LOWER CONTROL ARM'S UPPER AND LOWER PANELS BECOME PERFORATED. A PERFORATED FRONT LOWER CONTROL ARM MAY FRACTURE BETWEEN ITS BALL JOINT ATTACHMENT AND THE FORWARD AND REARWARD PIVOT ATTACHMENTS TO THE CHASSIS.
Manufacturer’s stated response
DEALERS WILL INSPECT THE FRONT LOWER CONTROL ARMS FOR CORROSION DAMAGE. IF SPECIFIED LEVELS OF INTERNAL CORROSION DAMAGE ARE FOUND, THE FRONT LOWER CONTROL ARMS WILL BE REPLACED WITH NEW FRONT LOWER CONTROL ARMS INCORPORATING ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS. IF THE FRONT LOWER CONTROL ARMS DO NOT REQUIRE REPLACEMENT, THE DEALER WILL ADD DRAINAGE HOLES TO THE FRONT LOWER CONTROL ARMS AND WILL TREAT THE FRONT LOWER CONTROL ARMS WITH RUST-PROOFING MATERIALS TO ARREST THE INTERNAL CORROSION PROCESS. THESE PROCEDURES WILL BE PERFORMED FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 17, 2009. OWNERS MAY CONTACT THE HYUNDAI CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.
Manufacturer campaign: 091
Read campaign 09V125000 at NHTSAAIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVECampaign 08V533000
Reported concern
HYUNDAI IS RECALLING CERTAIN MY 2001-2002 ELANTRA VEHICLES. MOVEMENT OF THE SIDE IMPACT AIR BAG WIRING HARNESS MOUNTED UNDER EACH FRONT SEAT, POSSIBLY CAUSED BY CONTACT FROM MATERIALS PLACED UNDER THE SEAT, MAY RESULT IN AN ELECTRICAL RESISTANCE THAT WOULD CAUSE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) WARNING LIGHT ILLUMINATION.
Manufacturer’s stated response
DEALERS WILL INSTALL NEW SIDE IMPACT AIR BAG WIRING HARNESS CONNECTOR CLIPS AND REVISED SIDE IMPACT AIR BAG WIRING HARNESS ATTACHMENTS UNDER THE DRIVER'S AND FRONT PASSENGER'S SEATS. THE RECALL IS EXPECTED TO BEGIN DURING THE FOURTH QUARTER OF 2008, AND WILL BE SENT OUT IN SIX MAILINGS. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.
Manufacturer campaign: 088
Read campaign 08V533000 at NHTSAAIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVECampaign 08V532000
Reported concern
HYUNDAI IS RECALLING CERTAIN MY 2001 ELANTRA VEHICLES. IF A LIQUID IS SPILLED IN THE AREA OF THE CUPHOLDER ON THE CENTER CONSOLE, IT MAY SEEP THROUGH THE CONSOLE OPENING FOR THE PARKING BRAKE LEVER AND THEN DRIP ONTO THE AIR BAG CONTROL MODULE ELECTRICAL CONNECTOR. THE SPILLED LIQUID MAY CONTAMINATE THE AIR BAG CONTROL MODULE AND ITS ELECTRICAL CONNECTOR TO THE AIR BAG WIRING HARNESS AND CAUSE THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) WARNING LIGHT TO ILLUMINATE.
Manufacturer’s stated response
DEALERS WILL INSTALL A PROTECTIVE COVER OVER THE VEHICLE'S AIR BAG CONTROL MODULE CONNECTOR. THE RECALL OWNER NOTIFICATION BEGAN ON NOVEMBER 30, 2008, AND LETTERS WILL BE SENT OUT IN SIX MAILINGS. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.
Manufacturer campaign: 088
Read campaign 08V532000 at NHTSASERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGSCampaign 03V496000
Reported concern
ON CERTAIN PASSENGER VEHICLES, THE BRAKE TUBES FOR THE REAR BRAKES CAN CONTACT THE STEERING GEARBOX MOUNTING BRACKETS.
Manufacturer’s stated response
DEALERS WILL REPOSITION THE REAR BRAKE TUBES, INSTALL BRAKE TUBE CLIPS, AND APPLY ANTI-CORROSION MATERIAL TO THE REAR BRAKE TUBES. OWNER NOTIFICATION BEGAN JANUARY 22, 2004. OWNERS SHOULD CONTACT HYUNDAI OF PUERTO RICO AT 1-800-633-5151.
Manufacturer campaign: 061
Read campaign 03V496000 at NHTSASERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGSCampaign 03V257000
Reported concern
ON CERTAIN PASSENGER VEHICLES, THE REAR BRAKE TUBES PASS BEHIND THE FRONT SUSPENSION CROSSMEMBER. TWO STEERING GEARBOX MOUNTING BRACKETS ARE WELDED TO THE CROSSMEMBER. ON VEHICLES EQUIPPED WITH AN ANTILOCK BRAKE SYSTEM (ABS), THE REAR BRAKE TUBES COULD CONTACT BOTH STEERING GEARBOX MOUNTING BRACKETS. ON VEHICLES THAT ARE NOT EQUIPPED WITH ABS, THE REAR BRAKE TUBES MAY CONTACT ONLY THE LEFT MOUNTING BRACKET. CONTACT BETWEEN THE REAR BRAKE TUBES AND THE STEERING BRACKETS COULD CAUSE WEAR AND CORROSION THAT COULD RESULT IN BRAKE FLUID LEAKAGE.
Manufacturer’s stated response
DEALERS WILL REPOSITION THE REAR BRAKE TUBES SO THEY DO NOT CONTACT THE MOUNTING BRACKETS, INSTALL BRAKE TUBE CLIPS TO CONTROL THE LOCATION OF THE REAR BRAKE TUBES, AND APPLY ANTI-CORROSION MATERIAL TO THE TUBES IN THE AREAS WHERE CONTACT WITH THE MOUNTING BRACKETS MAY HAVE OCCURRED. OWNER NOTIFICATION BEGAN ON OCTOBER 13, 2003. OWNERS SHOULD CONTACT HYUNDAI AT 1-800-633-5151.
Manufacturer campaign: 061
Read campaign 03V257000 at NHTSAAIR BAGS:SIDE/WINDOWCampaign 00V332000
Reported concern
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SUPPLEMENTAL RESTRAINT SYSTEM SIDE AIR BAG SATELLITE SENSORS INSTALLED WERE IMPROPERLY MANUFACTURED, CAUSING THE AIR BAG WARNING LIGHT TO ILLUMINATE AND THE SIDE AIR BAGS TO NOT DEPLOY AS INTENDED IN THE EVENT OF A CRASH.
Manufacturer’s stated response
DEALERS WILL REPLACE THE TWO SATELLITE SENSORS.
Manufacturer campaign: 043
Read campaign 00V332000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
102 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
25-BD-012H TSBThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensat…NHTSA ID 11025476
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Components: EXTERIOR LIGHTING. Confirm detailed applicability in the original document.
Source record 11025476 at NHTSA24-BD-001HThis bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail sp…NHTSA ID 10251285
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
Components: VISIBILITY · VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 10251285 at NHTSA23-EM-005HThis bulletin provides important checkpoint guidelines when performing engine oil and filter change services.NHTSA ID 10247189
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10247189 at NHTSA23-BD-007HHyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the pa…NHTSA ID 10235566
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 10235566 at NHTSA23-BD-002HThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensat…NHTSA ID 10230904
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Components: VISIBILITY. Confirm detailed applicability in the original document.
Source record 10230904 at NHTSA22-EM-010HFollow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.NHTSA ID 10217251
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10217251 at NHTSA22-GI-006HEffective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before re…NHTSA ID 10217258
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
Components: TIRES. Confirm detailed applicability in the original document.
Source record 10217258 at NHTSA21-AT-006HHyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicleâÂÂs ownerâÂÂs manual. ï· Use of other ATF may result in improper shift quality or other drivability conditions. ï· Use of other…NHTSA ID 10196546
Hyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicleâÂÂs ownerâÂÂs manual. ï· Use of other ATF may result in improper shift quality or other drivability conditions. ï· Use of other DCT and IVT gear oil may result in reduced durability. Hyundai does not approve the use of any aftermarket ATF or gear oil additives.
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10196546 at NHTSA21-EM-004HThis bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next r…NHTSA ID 10190044
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Components: ENGINE AND ENGINE COOLING · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10190044 at NHTSA21-BR-002HThis bulletin provides best practice recommendations when performing brake service procedures.NHTSA ID 10190038
This bulletin provides best practice recommendations when performing brake service procedures.
Components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 10190038 at NHTSA21-EM-003HThis bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.NHTSA ID 10189989
This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
Components: ENGINE AND ENGINE COOLING · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10189989 at NHTSA20-BR-002HThis bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.NHTSA ID 10183963
This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
Components: SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 10183963 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
FRONT LOWER CONTROL ARMS RUSTINGPE09011
ON APRIL 14, 2009, HYUNDAI MOTOR CORPORATION SUBMITTED TO ODI A DEFECT INFORMATION REPORT INDICATING THAT IT WOULD RECALL A SALT-BELT POPULATION OF APPROXIMATELY 155,317 MODEL YEAR (MY) 2001 THROUGH 2003 HYUNDAI ELANTRA VEHICLES TO REMEDY A DEFECT THAT CAN RESULT IN LOSS OF VEHICLE CONTROL WITH AN INCREASED RISK OF A CRASH WHILE DRIVING (09V-125).THE AFFECTED VEHICLES COVER ALL MY 2001, MY 2002, AND MY 2003 THROUGH JANUARY 13, 2003 PRODUCTION.THESE INCLUDE ELANTRA VEHICLES THAT WERE ORIGINALLY SOLD OR CURRENTLY REGISTERED IN CONNECTICUT, DELAWARE, DISTRICT OF COLUMBIA, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA AND WISCONSIN.THE TOTAL THREE-YEAR PRODUCTION POPULATION FOR THE ELANTRA VEHICLES IS APPROXIMATELY 350,000. ACCORDING TO HYUNDAI, ROAD SALT CAN COLLECT IN THE OUTBOARD PORTION OF THE FRONT LOWER CONTROL ARM AND MAY RESULT IN INTERNAL CORROSION LEADING TO THINNING OF THE STEEL IN THE LOWER CONTROL ARMS.THE CORROSION MAY PROGRESS TO THE POINT WHERE THE LOWER CONTROL ARM UPPER AND LOWER PANELS BECOME PERFORATED.A PERFORATED FRONT LOWER CONTROL ARM MAY FRACTURE BETWEEN ITS BALL JOINT ATTACHMENT AND THE FORWARD AND REARWARD PIVOT ATTACHMENTS TO THE CHASSIS.THIS COULD AFFECT THE DRIVER'S CONTROL OVER THE TIRE AND WHEEL ASSEMBLY.HYUNDAI'S RECALL PROCEDURE INSTRUCTS DEALERS TO MEASURE THE THICKNESS OF THE STEEL IN THE FRONT LOWER CONTROL ARMS.IF SPECIFIED LEVELS OF CORROSION DAMAGE HAVE OCCURRED, THE FRONT LOWER CONTROL ARMS WILL BE REPLACED WITH NEW FRONT LOWER CONTROL ARMS WITH ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS. ODI'S ANALYSIS OF FRONT LOWER CONTROL ARM COMPLAINT AND WARRANTY DATA SHOWS 220 COMPLAINTS AND 1,033 WARRANTY CLAIMS FOR THE TOTAL APPROXIMATELY 350,000 SUBJECT VEHICLES SOLD THROUGHOUT THE UNITED STATES, RESULTING IN A COMPLAINT RATE OF 62.82 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.3 PERCENT.ODI'S ANALYSIS FOUND 7 COMPLAINTS AND 90 WARRANTY CLAIMS IN 132,475 VEHICLES SOLD IN NON-SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 5.3 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.1 PERCENT. ODI'S ANALYSIS FURTHER FOUND 196 COMPLAINTS AND 943 WARRANTY CLAIMS IN 155,317 VEHICLES SOLD IN SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 126.2 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.6 PERCENT.ODI IDENTIFIED 34 INCIDENTS OF LOWER CONTROL ARM FRACTURE RELATED TO CORROSION, ALL OF WHICH OCCURRED IN SALT BELT STATES.THE DATA DO NOT SHOW A DEFECT TREND IN VEHICLES OUTSIDE THE REGION COVERED BY HYUNDAI'S RECALL. THIS PRELIMINARY EVALUATION IS CLOSED.
Recorded closure: Apr 21, 2009
Campaign reference in the source: 09V125000
Find investigation PE09011AIR BAG LIGHT ILLUMINATIONEA08012
HYUNDAI IS CONDUCTING TWO SAFETY RECALLS TO CORRECT TWO SAFETY DEFECTS DESCRIBED BELOW.UNDER SAFETY RECALL 08V-532, HYUNDAI WILL INSTALL A VINYL PROTECTIVE SHIELD/COVER TO PREVENT SHORT CIRCUITS IN THE AIR BAG CONTROL MODULE CAUSE BY SPILLS OF LIQUIDS THAT SEEP INTO THE MODULE CONNECTOR. THIS ACTION APPLIES TO 78,369 MY 2001 VEHICLES (BUILT THROUGH 4/26/2001).THE AIR BAG CONTROL MODULE CONNECTOR IN MY 2001 VEHICLES BUILT AFTER 4/26/2001 IS COVERED BY THE CARPET.TO IMPROVE THE INTEGRITY OF THE SIDE IMPACT AIR BAG WIRING HARNESS UNDER THE DRIVER AND FRONT PASSENGER SEATS, HYUNDAI WILL INSTALL NEW CLIPS AND REVISE THE WIRING HARNESS ATTACHMENTS UNDER SAFETY RECALL 08V-533.THIS APPLIES TO 150,541 MY 2001 THROUGH MY 2002 VEHICLES (BUILT THROUGH 12/18/2001).HYUNDAI UPGRADED THE WIRING HARNESS ROUTING/CONNECTOR CLIP ON MY 2002 VEHICLES BUILT AFTER 12/18/2001.HYUNDAI DESIGNED THE SUBJECT VEHICLES (UNDER SAFETY RECALL 08V-532) SUCH THAT THE AIR BAG CONTROL MODULE CONNECTOR IS LOCATED DIRECTLY BELOW THE CENTER CONSOLE CUP HOLDERS.SPILLAGE OF LIQUID FROM CUPS PLACED IN THE CUP HOLDERS MAY CONTAMINATE THE CONTROL MODULE AND THE CONNECTOR AND PREVENT PROPER DEPLOYMENT OF THE AIR BAGS.IN ADDITION, IN THE SUBJECT VEHICLES UNDER SAFETY RECALL 08V-533, HYUNDAI LOCATED A WIRING HARNESS FOR THE SIDE IMPACT AIR BAGS UNDER EACH FRONT SEAT.MOVEMENT OF THE SEAT OR PLACEMENT OF OBJECTS UNDER THE SEAT MAY DISTURB THE ELECTRICAL CONNECTION IN THE SIDE IMPACT AIR BAG WIRING CIRCUIT.FOR EACH OF THE ABOVE DESCRIBED CONDITIONS, THE AIR BAG WARNING LIGHT WILL ILLUMINATE WHEN THE VEHICLE DIAGNOSTIC SYSTEM DETECTS A FAULT.THIS INVESTIGATION IDENTIFIED SEVERAL CRASH REPORTS (TWO FATAL AND 17 CRASH REPORTS RESULTING IN NINE INJURY REPORTS) THAT INCLUDED ALLEGATIONS OF PRIOR AIR BAG WARNING LIGHT ILLUMINATION AND NON-DEPLOYMENT OF THE AIR BAGS, WHICH ARE NOT INCLUDED IN THE FAILURE REPORT SUMMARY.THIS ENGINEERING ANALYSIS IS CLOSED (SEE RECALLS 08V-532 & 08V533).
Recorded closure: Nov 14, 2008
Campaign reference in the source: 08V533000
Find investigation EA08012AIR BAG LIGHT ILLUMINATIONPE08017
IN CERTAIN MODEL YEAR (MY) 2001 AND 2002 VEHICLES, THE AIR BAG SYSTEM IS SUSCEPTIBLE TO AIR BAG LIGHT ILLUMINATION AND AIR BAG NON-DEPLOYMENT OR INADVERTENT DEPLOYMENT FROM LIQUID CONTAMINATION OF THE AIR BAG CONTROL MODULE.THE CONTROL MODULE IS LOCATED BENEATH AND NEAR CENTER CONSOLE CUP HOLDERS.ODI IS ALSO AWARE OF COMPLAINTS REGARDING AIR BAG LIGHT ILLUMINATION DUE TO LOSS OF PROPER AIR BAG ELECTRICAL INTEGRITY IN WIRING AND CONNECTIONS LOCATED UNDER THE FRONT SEATS.UNDER INVESTIGATION PE08-017, HYUNDAI PROVIDED 472 OWNER REPORTS AND 9,108 WARRANTY CLAIMS RELATED TO THESE ISSUES FOR MY 2001 AND 2002 VEHICLES BUILT THROUGH 12/14/2001.ODI IS ALSO AWARE OF SIX INCIDENTS OF SEAT BELT PRETENSIONER/AIR BAG INADVERTENT DEPLOYMENTS DUE TO LIQUID SPILLS.TO ADDRESS THE ABOVE ISSUES, ON 04/25/2001, HYUNDAI ADDED A CARPET COVER/SHIELD OVER THE AIR BAG CONTROL MODULE CONNECTOR AREA AND UPGRADED THE CABLE ROUTING AND ATTACHMENT POINTS TO IMPROVE THE ELECTRICAL CONNECTIONS ON VEHICLES BUILT AFTER 12/14/2008.THIS PRELIMINARY EVALUATION IS BEING UPGRADED TO AN ENGINEERING ANALYSIS (EA08-012) FOR FURTHER INVESTIGATION OF CERTAIN MY 2001-2002 SUBJECT VEHICLES BUILT THROUGH 12/14/2002.
Recorded closure: Jul 10, 2008
Find investigation PE08017Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.