The vehicle dossier US · 2000
2000 Dodge
RAM 2500Problems & recalls
211 distinct owner reports in the NHTSA snapshot. Body & structure appears in 56 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 211 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
80,000 miles is the median among 121 reports with usable mileage. The middle half spans 50,000–114,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
2 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
ENGINE AND ENGINE COOLINGCampaign 06E024000
Reported concern
CERTAIN REPLACEMENT K&N FUEL PERFORMANCE KITS, P/NOS. 57-1509, 57-1511, 57-1511-1, 57-1517, 57-1517-1, 57-1527, AND 57-1530. ALSO, A SMALL PERCENTAGE OF THESE KITS WERE SOLD UNDER THE MOPAR PERFORMANCE PARTS BRAND NAME (P/NOS. P5007069 AND P5007070). ALL KITS WERE MANUFACTURED FROM APRIL 20, 1999, THROUGH SEPTEMBER 23, 2004. THESE ASSEMBLIES WERE MANUFACTURED AS REPLACEMENT EQUIPMENT FOR CERTAIN DODGE PICKUP TRUCKS AND SUVS. A SMALL PIECE OF MATERIAL FROM THE TUBE WALL COULD BE SUCKED INTO THE ENGINE THROTTLE BODY, WHICH COULD CAUSE THE THROTTLE TO BECOME JAMMED IN THE OPEN POSITION.
Manufacturer’s stated response
K&N WILL PROVIDE OWNERS WITH A FREE REPAIR KIT ALONG WITH REPAIR INSTRUCTIONS. THE RECALL BEGAN ON APRIL 20, 2006.
Read campaign 06E024000 at NHTSAAIR BAGSCampaign 01V153000
Reported concern
VEHICLE DESCRIPTION: PICKUP TRUCKS. SOUND DEADENER MATERIAL INSIDE THE STEERING WHEEL COULD BECOME DETACHED FROM THE COVER AND HOUSING. NOTE: THE RAM PICKUP TRUCKS WERE BUILT AT THE WARREN ASSEMBLY PLANT ("S" IN THE 11TH VIN POSITION) FROM MAY 16, 2000 THROUGH OCTOBER 23, 2000; ST. LOUIS NORTH ASSEMBLY PLANT ("J" IN THE 11TH VIN POSITION) FROM MAY 19, 2000 THROUGH OCTOBER 23, 2000; LAGO ALBERTO ASSEMBLY PLANT ("M" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000; AND SALTILLO ASSEMBLY PLANT ("G" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000. IMPORTANT: VEHICLES THAT HAVE ALREADY HAD THE PROPER CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN EXCLUDED FROM THIS RECALL. IN ADDITION, 1997-2000 MODEL YEAR VEHICLES THAT HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN ADDED TO THIS RECALL.
Manufacturer’s stated response
DEALERS WILL REPLACE THE CLOCKSPRING ASSEMBLY. OWNER NOTIFICATION BEGAN JUNE 18, 2001. ALSO SOME 1997-200 MODEL YEAR VEHICLES THAT, ACCORDING TO WARRANTY RECORDS, HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, WILL ALSO BE INCLUDED IN THIS CAMPAIGN. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Manufacturer campaign: 982
Read campaign 01V153000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
19 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
9004275KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program …NHTSA ID 10229256
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
Components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. Confirm detailed applicability in the original document.
Source record 10229256 at NHTSA9004275KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program …NHTSA ID 10221686
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
Components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. Confirm detailed applicability in the original document.
Source record 10221686 at NHTSA08-049-20Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replaceme…NHTSA ID 10175735
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Components: ELECTRICAL SYSTEM · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10175735 at NHTSADOR-X6W2U-06This SKU is a Clock Spring. The customer communication requested return of unsold inventory to inspect the internal spring. If the internal spring is not seated, the electrical circuit for the horn is disconnected and the horn …NHTSA ID 10176211
This SKU is a Clock Spring. The customer communication requested return of unsold inventory to inspect the internal spring. If the internal spring is not seated, the electrical circuit for the horn is disconnected and the horn will not function. The horn electrical circuit does not affect the airbag circuit.
Components: AIR BAGS · ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10176211 at NHTSA3100519Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.NHTSA ID 10220101
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220101 at NHTSA3100319Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.NHTSA ID 10220099
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220099 at NHTSA3100619Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.NHTSA ID 10220097
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220097 at NHTSA31-005-19Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.NHTSA ID 10169249
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10169249 at NHTSA31-003-19Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.NHTSA ID 10169247
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10169247 at NHTSA31-006-19Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.NHTSA ID 10169245
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10169245 at NHTSA1807717Connecting to the DRB III Emulator for Cummins EnginesNHTSA ID 10224768
Connecting to the DRB III Emulator for Cummins Engines
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10224768 at NHTSA68332810Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installat…NHTSA ID 10223854
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10223854 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
2000-2001 DODGE RAM PICKUP HOOD LATCHPE08047
THE AGENCY OPENED THIS INVESTIGATION BASED ON 30 COMPLAINTS ALLEGING THAT THE HOODS ON MODEL YEAR (MY) 2000 AND 2001 DODGE RAM PICKUP TRUCKS FLEW UP AND BLOCKED THE DRIVER'S VISION.THESE VEHICLES HAVE A PRIMARY HOOD LATCH AND A SECONDARY (BACKUP) HOOD LATCH.THE SECONDARY LATCH IS DESIGNED TO SECURE THE HOOD IF THE PRIMARY HOOD LATCH IS NOT PROPERLY CLOSED OR OTHERWISE MALFUNCTIONS.IN THESE COMPLAINTS, THE SECONDARY HOOD LATCH MALFUNCTIONED, APPARENTLY DUE TO CORROSION, AND DID NOT LATCH.DODGE CONDUCTED RECALL 01V-040 IN 1999 TO ADDRESS SIMILAR PROBLEMS ON MODEL YEAR 1994-1997 DODGE RAM PICKUP TRUCKS.THE INFORMATION CHRYSLER PROVIDED IN RESPONSE TO ODI'S INFORMATION REQUEST LETTER INDICATED THAT THE MY 2000 AND 2001 VEHICLES WERE EQUIPPED WITH SECONDARY HOOD LATCHES WITH STAINLESS STEEL RETURN SPRINGS, AS OPPOSED TO THE EARLIER RECALLED TRUCKS THAT HAD ZINC COATED CARBON STEEL RETURN SPRINGS.THE RECALLED COMPONENTS WERE SUSCEPTIBLE TO CORROSION-INDUCED FAILURE DUE TO THE TYPE OF MATERIAL USED, WHEREAS THE CORROSION FAILURES IN THE NEWER MODELS APPEAR TO BE DUE TO LUBRICATION LOSS OVER TIME (REGULAR APPLICATION OF GREASE IS ADVISED PER INSTRUCTIONS IN THE OWNERS' MANUAL). ODI'S REVIEW OF CHRYSLER'S WARRANTY, COMPLAINT, AND INJURY DATA FOR THE 2000 AND 2001 VEHICLES INDICATES THAT THE RATES FOR SUBJECT VEHICLES ARE LOW AND ARE DECLINING.A POTENTIAL DEFECT TREND HAS NOT BEEN IDENTIFIED.THIS INVESTIGATION IS CLOSED.
Recorded closure: Dec 17, 2008
Find investigation PE08047Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.