The vehicle dossier US · 2000
2000 Dodge
INTREPIDProblems & recalls
1,065 distinct owner reports in the NHTSA snapshot. Engine appears in 785 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 1,065 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
75,000 miles is the median among 792 reports with usable mileage. The middle half spans 57,000–94,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
9 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
EXTERIOR LIGHTING:HEADLIGHTSCampaign 09E025000
Reported concern
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Manufacturer’s stated response
DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.
Read campaign 09E025000 at NHTSAEXTERIOR LIGHTINGCampaign 09E012000
Reported concern
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Manufacturer’s stated response
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
Read campaign 09E012000 at NHTSASEATS:FRONT ASSEMBLY:RECLINERCampaign 03V035000
Reported concern
ON CERTAIN PASSENGER VEHICLES, SEAT BACK RECLINER BOLT BREAKAGE CAN OCCUR RESULTING IN THE SEAT BACK RECLINING UNEXPECTEDLY.
Manufacturer’s stated response
DEALERS WILL REPLACE THE RECLINER BOLTS. OWNER NOTIFICATION BEGAN ON APRIL 23, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Manufacturer campaign: C04
Read campaign 03V035000 at NHTSASTRUCTURE:FRAME AND MEMBERSCampaign 01V273000
Reported concern
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES (NON-SUNROOF ONLY) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT."
Manufacturer’s stated response
OWNERS WILL BE SENT A STORAGE BIN ACCESSORY UNIT THAT CAN BE ATTACHED TO THE B-PILLAR ALONG WITH INSTALLATION INSTRUCTIONS. HOWEVER, IF AN OWNER WISHES, THE DEALER CAN PERFORM THE INSTALLATION. OWNER NOTIFICATION BEGAN DECEMBER 17, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Manufacturer campaign: 991
Read campaign 01V273000 at NHTSACHILD SEATCampaign 00V366000
Reported concern
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, PICKUP TRUCKS AND SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." SOME OF THE OWNER'S MANUALS FOR THESE VEHICLES ARE MISSING INSTRUCTIONS THAT PROVIDE A STEP-BY-STEP PROCEDURE, INCLUDING DIAGRAMS, FOR PROPERLY ATTACHING A CHILD RESTRAINT SYSTEM'S TETHER STRAP TO THE TETHER ANCHORAGE.
Manufacturer’s stated response
OWNERS WILL BE PROVIDED WITH AN ADDENDUM TO THE OWNER'S MANUALS.
Manufacturer campaign: 957
Read campaign 00V366000 at NHTSASERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDERCampaign 00V180000
Reported concern
VEHICLE DESCRIPTION: NON-ABS EQUIPPED PASSENGER VEHICLES. THE BRAKE MASTER CYLINDER PISTON RETAINER SNAP RING MAY HAVE BEEN BENT INWARD DURING THE ASSEMBLY PROCESS. THE MASTER CYLINDER PISTON MAY BE IN A "BRAKE APPLIED" POSITION DUE TO THE DAMAGED PISTON RETAINER SNAP RING. WHEN THE PISTON IS IN THE APPLIED POSITION, THE FLUID COMPENSATION PORTS ARE CLOSED WHICH RESULTS IN A BRAKE DRAG CONDITION.
Manufacturer’s stated response
DEALERS WILL REPLACE THE BRAKE MASTER CYLINDER.
Manufacturer campaign: 885
Read campaign 00V180000 at NHTSASEAT BELTSCampaign 00V034000
Reported concern
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SEAT BELT SHOULDER HEIGHT ADJUSTABLE TURNING LOOP (ATL) TOP MOUNTING BOLT WAS INADEQUATELY MANUFACTURED.
Manufacturer’s stated response
DEALERS WILL REPLACE THE SHOULDER BELT HEIGHT ADJUSTER MOUNTING BOLTS.
Manufacturer campaign: 866
Read campaign 00V034000 at NHTSASEAT BELTS:FRONT:RETRACTORCampaign 00V033000
Reported concern
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE MOLDING FLASH ON THE PRIMARY LEVER MAY PREVENT THE OPERATION OF THE G-LOCK AND TILT LOCK FUNCTIONS ON SOME OF THE DRIVER'S SIDE RETRACTORS.
Manufacturer’s stated response
DEALERS WILL REPLACE THE LEFT FRONT RETRACTOR ASSEMBLIES.
Manufacturer campaign: 863
Read campaign 00V033000 at NHTSAAIR BAGS:FRONTALCampaign 99V343000
Reported concern
VEHICLE DESCRIPTION: PASSENGER AND SPORT UTILITY VEHICLES. THE PASSENGER AIR BAG INFLATOR ASSEMBLY CONTAINS AN INCORRECT INFLATOR CHARGE AMOUNT.
Manufacturer’s stated response
DEALERS WILL REPLACE THE AIR BAG MODULE WITH A CORRECT MODULE.
Read campaign 99V343000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
81 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
9004275KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program …NHTSA ID 10229256
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
Components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. Confirm detailed applicability in the original document.
Source record 10229256 at NHTSA9004275KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program …NHTSA ID 10221686
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
Components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. Confirm detailed applicability in the original document.
Source record 10221686 at NHTSA08-049-20Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replaceme…NHTSA ID 10175735
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Components: ELECTRICAL SYSTEM · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10175735 at NHTSA3100519Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.NHTSA ID 10220101
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220101 at NHTSA3100319Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.NHTSA ID 10220099
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220099 at NHTSA3100619Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.NHTSA ID 10220097
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220097 at NHTSA31-005-19Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.NHTSA ID 10169249
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10169249 at NHTSA31-003-19Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.NHTSA ID 10169247
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10169247 at NHTSA31-006-19Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.NHTSA ID 10169245
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10169245 at NHTSA68332810Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installat…NHTSA ID 10223854
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10223854 at NHTSAR2118796AValve Body. These may cause over drive cycling.NHTSA ID 10191460
Valve Body. These may cause over drive cycling.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10191460 at NHTSA900251982212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Was…NHTSA ID 10129008
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Confirm detailed applicability in the original document.
Source record 10129008 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
THROTTLE CONTROL FAILUREPE03010
BASED ON THE LOW FAILURE RATE, THE ABSENCE OF FAILURES OVER THE PAST YEAR, THE ABSENCE OF INJURIES, AND ODI'S FIELD INVESTIGATION OF INCIDENT VEHICLES, A SAFETY-RELATED DEFECT TREND HAS NOT BEEN IDENTIFIED AT THIS TIME.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY WILL TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES. SEE ATTACHED REPORT FOR ADDITIONAL INFORMATION.
Recorded closure: Sep 2, 2003
Find investigation PE03010Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.