The vehicle dossier US · 2000
2000 Dodge
DAKOTAProblems & recalls
806 distinct owner reports in the NHTSA snapshot. Suspension appears in 282 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 806 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
52,000 miles is the median among 359 reports with usable mileage. The middle half spans 36,000–70,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
12 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
EXTERIOR LIGHTING:HEADLIGHTSCampaign 09E025000
Reported concern
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Manufacturer’s stated response
DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.
Read campaign 09E025000 at NHTSAEXTERIOR LIGHTINGCampaign 09E012000
Reported concern
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Manufacturer’s stated response
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
Read campaign 09E012000 at NHTSASUSPENSION:FRONT:HUBCampaign 08E064000
Reported concern
SKF IS RECALLING 2,805 HUB UNITS, PART NO. BR930361, SOLD AS A SERVICE PART FOR 1997-2004 DODGE DAKOTA VEHICLES AND 1999-2003 DODGE DURANGO VEHICLES EQUIPPED WITH 2-WHEEL DRIVE & REAR AXLE ABS. DUE TO A SPECIFICATION ERROR, THE ROTOR PILOT FOR THE HUB UNIT MAY BE TOO LONG. THIS RESULTS IN THE WHEEL TO NOT BE SEATED FULLY AGAINST THE HUB FLANGE FACE DURING MOUNTING.
Manufacturer’s stated response
SKF WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE HUB UNITS FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 5, 2008. OWNERS MAY CONTACT SKF VSM NORTH AMERICA CUSTOMER SERVICE AT 1-800-644-8999.
Read campaign 08E064000 at NHTSAEXTERIOR LIGHTINGCampaign 06E065000
Reported concern
CERTAIN AJ MOTORSPORT COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Manufacturer’s stated response
AJ MOTORSPORT WILL NOTIFY OWNERS AND OFFER REIMBURSEMENT FOR THE LAMPS. THE RECALL BEGAN ON JULY 31, 2006. OWNERS MAY CONTACT AJ MOTORSPORT AT 626-618-2026.
Read campaign 06E065000 at NHTSAEXTERIOR LIGHTINGCampaign 06E026000
Reported concern
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Manufacturer’s stated response
PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
Read campaign 06E026000 at NHTSAENGINE AND ENGINE COOLINGCampaign 06E024000
Reported concern
CERTAIN REPLACEMENT K&N FUEL PERFORMANCE KITS, P/NOS. 57-1509, 57-1511, 57-1511-1, 57-1517, 57-1517-1, 57-1527, AND 57-1530. ALSO, A SMALL PERCENTAGE OF THESE KITS WERE SOLD UNDER THE MOPAR PERFORMANCE PARTS BRAND NAME (P/NOS. P5007069 AND P5007070). ALL KITS WERE MANUFACTURED FROM APRIL 20, 1999, THROUGH SEPTEMBER 23, 2004. THESE ASSEMBLIES WERE MANUFACTURED AS REPLACEMENT EQUIPMENT FOR CERTAIN DODGE PICKUP TRUCKS AND SUVS. A SMALL PIECE OF MATERIAL FROM THE TUBE WALL COULD BE SUCKED INTO THE ENGINE THROTTLE BODY, WHICH COULD CAUSE THE THROTTLE TO BECOME JAMMED IN THE OPEN POSITION.
Manufacturer’s stated response
K&N WILL PROVIDE OWNERS WITH A FREE REPAIR KIT ALONG WITH REPAIR INSTRUCTIONS. THE RECALL BEGAN ON APRIL 20, 2006.
Read campaign 06E024000 at NHTSAFUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMPCampaign 06E011000
Reported concern
CERTAIN AFTERMARKET AIRTEX ELECTRIC FUEL PUMPS INSTALLED FOR USE AS REPLACEMENT EQUIPMENT FOR CERTAIN 1997-2004 JEEP WRANGLER; 1997-2001 JEEP CHEROKEE; 1997-2004 JEEP GRAND CHEROKEE; AND 2000-2003 DODGE DAKOTA VEHICLES. THE PLASTIC ELECTRICAL GROMMET CONNECTORS AT THE TOP OF THE FUEL PUMP MODULE ARE NOT COMPATIBLE WITH AUTOMOTIVE FUELS AND MAY DEGRADE CAUSING A POTENTIAL LEAK PATH FOR FUEL.
Manufacturer’s stated response
AIRTEX WILL NOTIFY ITS CUSTOMERS AND WILL REPLACE THE AFFECTED FUEL PUMPS FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 25, 2006. OWNERS MAY CONTACT AIRTEX CUSTOMER SERVICE DEPARTMENT AT 1-800-880-3056.
Manufacturer campaign: FP012506
Read campaign 06E011000 at NHTSASUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINTCampaign 04V596000
Reported concern
ON CERTAIN SPORT UTILITY VEHICLES AND PICKUP TRUCKS EQUIPPED WITH FOUR-WHEEL DRIVE (4X4), IF MOISTURE LEAKS INTO THE FRONT SUSPENSION UPPER BALL JOINT, EVACUATION OF THE LUBRICANT AND CORROSION OF THE JOINT MAY CAUSE THE JOINT TO WEAR OVER AN EXTENDED PERIOD OF TIME. THIS COULD CAUSE A CLUNKING NOISE IN THE FRONT SUSPENSION, WHICH MAY NOT ALWAYS BE HEARD BY THE VEHICLE OCCUPANTS.
Manufacturer’s stated response
DEALERS WILL REPLACE THE FRONT SUSPENSION UPPER BALL JOINTS. THIS SAFETY IMPROVEMENT CAMPAIGN BEGAN ON DECEMBER 21, 2004. OWNERS CAN CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Manufacturer campaign: D47
Read campaign 04V596000 at NHTSAAIR BAGSCampaign 01V153000
Reported concern
VEHICLE DESCRIPTION: PICKUP TRUCKS. SOUND DEADENER MATERIAL INSIDE THE STEERING WHEEL COULD BECOME DETACHED FROM THE COVER AND HOUSING. NOTE: THE RAM PICKUP TRUCKS WERE BUILT AT THE WARREN ASSEMBLY PLANT ("S" IN THE 11TH VIN POSITION) FROM MAY 16, 2000 THROUGH OCTOBER 23, 2000; ST. LOUIS NORTH ASSEMBLY PLANT ("J" IN THE 11TH VIN POSITION) FROM MAY 19, 2000 THROUGH OCTOBER 23, 2000; LAGO ALBERTO ASSEMBLY PLANT ("M" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000; AND SALTILLO ASSEMBLY PLANT ("G" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000. IMPORTANT: VEHICLES THAT HAVE ALREADY HAD THE PROPER CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN EXCLUDED FROM THIS RECALL. IN ADDITION, 1997-2000 MODEL YEAR VEHICLES THAT HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN ADDED TO THIS RECALL.
Manufacturer’s stated response
DEALERS WILL REPLACE THE CLOCKSPRING ASSEMBLY. OWNER NOTIFICATION BEGAN JUNE 18, 2001. ALSO SOME 1997-200 MODEL YEAR VEHICLES THAT, ACCORDING TO WARRANTY RECORDS, HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, WILL ALSO BE INCLUDED IN THIS CAMPAIGN. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Manufacturer campaign: 982
Read campaign 01V153000 at NHTSASERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGSCampaign 00V198000
Reported concern
VEHICLE DESCRIPTION: PICKUP TRUCKS. SOME VEHICLES MAY HAVE BEEN BUILT WITH INADEQUATE CLEARANCE BETWEEN THE REAR AXLE VENT HOSE AND THE BRAKE HOSE.
Manufacturer’s stated response
DEALERS WILL INSPECT THE REAR BRAKE HOSE FOR EVIDENCE OF WEAR. WORN BRAKE HOSES WILL BE REPLACED. THE REAR VENT HOSE WILL BE SHORTENED BY 3 INCHES AND A CLIP WILL BE INSTALLED TO ASSURE CLEARANCE BETWEEN THE AXLE VENT LINE AND BRAKE HOSE IS MAINTAINED.
Manufacturer campaign: 891
Read campaign 00V198000 at NHTSAPOWER TRAIN:AUTOMATIC TRANSMISSIONCampaign 00V197000
Reported concern
VEHICLE DESCRIPTION: PICKUP TRUCKS EQUIPPED WITH 4.7L ENGINE AND AUTOMATIC TRANSMISSIONS. THE AUTOMATIC TRANSMISSION MAY EXPEL FLUID FROM THE FILL TUBE DURING NORMAL TEMPERATURE OPERATION.
Manufacturer’s stated response
DEALERS WILL SHORTEN THE VENT HOSE AND ASSURE ADEQUATE CLEARANCE.
Manufacturer campaign: 890
Read campaign 00V197000 at NHTSASERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGSCampaign 00V193000
Reported concern
VEHICLE DESCRIPTION: PICKUP TRUCKS BUILT WITH 2.5L ENGINES. SOME VEHICLES MAY HAVE BEEN BUILT WITH INADEQUATE CLEARANCE BETWEEN THE LEFT FRONT BRAKE TUBE AND THE POWER STEERING HOSE.
Manufacturer’s stated response
DEALERS WILL INSPECT THE BRAKE TUBE AND POWER STEERING HOSE FOR WEAR. IF WEAR IS EVIDENT, THE BRAKE TUBE AND/OR POWER STEERING HOSE WILL BE REPLACED. A POWER STEERING STANDOFF BRACKET WILL BE INSTALLED ON ALL VEHICLES TO ENSURE THAT ADEQUATE CLEARANCE BETWEEN THE BRAKE TUBE AND POWER STEERING HOSE IS MAINTAINED.
Manufacturer campaign: 870
Read campaign 00V193000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
106 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
9004275KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program …NHTSA ID 10229256
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
Components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. Confirm detailed applicability in the original document.
Source record 10229256 at NHTSA9004275KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program …NHTSA ID 10221686
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
Components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. Confirm detailed applicability in the original document.
Source record 10221686 at NHTSA08-049-20Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replaceme…NHTSA ID 10175735
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Components: ELECTRICAL SYSTEM · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10175735 at NHTSADOR-X6W2U-06This SKU is a Clock Spring. The customer communication requested return of unsold inventory to inspect the internal spring. If the internal spring is not seated, the electrical circuit for the horn is disconnected and the horn …NHTSA ID 10176211
This SKU is a Clock Spring. The customer communication requested return of unsold inventory to inspect the internal spring. If the internal spring is not seated, the electrical circuit for the horn is disconnected and the horn will not function. The horn electrical circuit does not affect the airbag circuit.
Components: AIR BAGS · ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10176211 at NHTSA3100519Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.NHTSA ID 10220101
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220101 at NHTSA3100319Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.NHTSA ID 10220099
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220099 at NHTSA3100619Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.NHTSA ID 10220097
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220097 at NHTSA31-005-19Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.NHTSA ID 10169249
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10169249 at NHTSA31-003-19Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.NHTSA ID 10169247
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10169247 at NHTSA31-006-19Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.NHTSA ID 10169245
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10169245 at NHTSA68332810Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installat…NHTSA ID 10223854
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10223854 at NHTSA05191925ARadiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please perform the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the c…NHTSA ID 10228094
Radiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please perform the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the cooler?s top/bottom flared fittings on the radiator. ~ 2. Remove hex nut and the top flared fitting on the radiator tank.~ 3. Using a wire brush and gasket remover, clean off the old sealant on the smaller threaded portion of the flared fitting. Do the same for the threads on the trans oil cooler.~ 4. Apply a new application of Mopar PN 04318032 to the flared fitting, leaving the first threads free for ease of engagement.~ 5. Install the top flared fitting by hand, then torque the fitting to 235 +/- 15 Lb-In.~ 6. Install the hex nut and torque to 100 +/- 10 Lb-In.~ 7. Repeat steps 2-6 for bottom flared fitting.~ 8. Reinstall transmission line per normal installation procedures and ensure correct fluid level.~
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10228094 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
UPPER BALL JOINT SEPARATIONEA03023
DAIMLERCHRYSLER CORPORATION (DCC) IS RECALLING THE TARGET POPULATION OF APPROXIMATELY 600,000 MY 2000 THROUGH 2003 DURANGO AND DAKOTA VEHICLES WITH FOUR-WHEEL DRIVE TO REPLACE THE FRONT SUSPENSION UPPER BALL JOINTS WITH REDESIGNED PARTS THAT DO NOT HAVE THE JOINT INTEGRITY CONCERNS AND HAVE SUBSTANTIALLY IMPROVED JOINT RETENTION CAPACITY (NHTSA RECALL NO. 04V-596).THOUGH DCC DOES NOT ADMIT TO A SAFETY-DEFECT IN THE SUBJECT COMPONENTS, ODI BELIEVES THAT THE FACTS IN THIS INVESTIGATION SHOW OTHERWISE.BECAUSE OF THE LOW RATES OF SEPARATION INCIDENTS IN THE REMAINING SUBJECT VEHICLES, A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED IN THOSE POPULATIONS AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS IN THOSE VEHICLES.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.FOR ADDITIONAL INFORMATION, SEE THE ATTACHED CLOSING REPORT.
Recorded closure: Feb 11, 2005
Campaign reference in the source: 04V596000
Find investigation EA03023FRONT SAFETY BELT ANCHORAGEEA01010
ALLEGE THAT THE FRONT SAFETY BELT ANCHOR BOLTS DISENGAGE FROM THEIR MOUNTING POINTS OR ARE FOUND TO BE LOOSE.
Recorded closure: Aug 17, 2001
Campaign reference in the source: 01V233000
Find investigation EA01010STOP LAMP SWITCHPE00035
ALLEGED THAT ELECTRICAL FAILURE OF THE BRAKE STOP LAMP SWITCH MAN RESULT IN STOP LAMPS NOT ILLUMINATION DURING SERVICE BRAKE APPLICATION, AND THE VEHICLE'S CRUISE CONTROL SYSTEM MAY FAIL TO DISENGAGE
Recorded closure: Mar 9, 2001
Find investigation PE00035FRONT SAFETY BELT ANCHORAGE DISENGAGEMENPE00030
ALLEGED THAT THE DRIVER'S SEAT SAFETY BELT ANCHORS DISENGAGE FROM MOUNTING POINTS
Recorded closure: Mar 8, 2001
Find investigation PE00030Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.